Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aerosol injections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Dispersion characteristics of volcanically injected aerosol as seen by SAGE I, SAM II, and SAGE II

General features of the dispersion of aerosols injected into the atmosphere by volcanic eruptions are described on the bases of data from the SAGE I, SAGE II and SAM II satellites. All three satellites carried sensors which measured the vertical profile of aerosol extinction at 1 micron wavelength. The discussion covers the eruptions of seven volcanoes over the period 1979-82. The events occurred at low latitudes and in the Northern Hemisphere. Aerosols from Northern Hemisphere eruptions stayed in the Northern Hemisphere, while aerosols from low latitude events spread to both hemispheres. Dispersion was fastest in the winter hemisphere. Sample details are discussed from tracking the dispersion of the aerosol from the eruption of El Chichon by SAGE II sensors.

Kent, G. S.↗
NASA NTRS2010

Understanding Aerosol Direct Radiative Forcing - How Satellites Fit In

The aerosol data products from the NASA Earth Observing System's MISR and MODIS instruments provide significant advances in regional and global aerosol optical depth (AOD) mapping, aerosol type measurement, and source plume characterization from space. Although these products have been and are being used for many applications, ranging from regional air quality assessment, to aerosol air mass type identification and evolution, to aerosol injection height and aerosol transport model validation, uncertainties still limit the quantitative constraints these satellite data place on global-scale direct aerosol radiative forcing. Some further refinement of the current aerosol products is possible, but a major advance in this area seems to require a different paradigm, involving the integration of satellite and suborbital data with models. This presentation will briefly summarize where we stand, and what incremental advances we can expect, with the current aerosol products, and will then elaborate on some initial steps aimed at the necessary integration of data from multiple sources and models.

Kahn, R. A.↗
NASA NTRS1988

A 3-dimensional numerical simulation of the atmospheric injection of aerosols by a hypothetical basaltic fissure eruption

Researchers simulated the atmospheric response to a hypothetical basaltic fissure eruption using heating rates based on the Roza flow eruption. The simulation employs the Colorado State University Regional Atmospheric Model (RAMS) with scavenging effects. The numerical model is a three-dimensional non-hydrostatic time-split compressible cloud/mesoscale model. Explicit microphysics include prediction of cloud, rain, crystal, and hail precipitation types. Nucleation and phoretic scavenging are predicted assuming that the pollutant makes an effective cloud droplet nucleus. Smoke is carried as a passive tracer. Long and short wave radiation heating tendencies, including the effects of the smoke, are parameterized. The longwave emission by the lava surface is neglected in the parameterization and included as an explicit heating term instead. A regional scale domain of 100 x 100 km in the horizontal and 22 km high is used. The horizontal grid spacing is taken to be 2 km and the vertical spacing is taken to be 0.75 km. The initial atmospheric state is taken to be horizontally homogenous and based on the standard atmospheric sounding. The fissure is assumed to be 90 km long and oriented in a zig/zag pattern.

Tripoli, Gregory J.↗
NASA NTRS1979

Design, fabrication and delivery of a prototype saturator for ACPL

The design configuration and performance characteristics of a saturator developed to provide ground-based simulation for some of the experiments for ACPL-1 first flights of Spacelab are described, some difficulties encountered with the apparatus are discussed, and recommendations concerning testing of this type of instrument are presented. The saturators provide a means of accurately fixing the water vapor mixing ratio of an aerosol sample. Dew point temperatures from almost freezing to ambient room temperatures can be attained with high precision. The instruments can accommodate aerosol flow rates approaching 1000 cc/s. Provisions were made to inject aerosols upstream of these saturators, although downstream injection can be accomplished as well. A device of this type will be used in the ACPL-1 to condition various aerosols delivered concurrently to a CFD, expansion chamber, and static diffusion chamber used in zero gravity cloud-forming experiments. The saturator was designed to meet the requirements projected for the flight instrument.

Keyser, G.↗
NASA NTRS2022

Dynamical Perturbation of the Stratosphere by a Pyrocumulonimbus Injection of Carbonaceous Aerosols

The Pacific Northwest pyrocumulonimbus Event (PNE) took place in British Columbia during the evening and night-time hours between the 12th and 13th of August 2017. Several pyroconvective clouds erupted in this occasion, and released in the upper troposphere/lower stratosphere unprecedented amounts of carbonaceous aerosols (300 ktn). Only a few years later, an even larger pyroCb injection took place over Australia. This event, named the Australian New Year (ANY) event, injected up to 1100 ktn of aerosol between December 29th 2019 and January 4th 2020. Such large injections of carbonaceous aerosol modify the stratospheric radiative budgets, locally perturbing stratospheric temperatures and winds. In this study, we use the Goddard Earth Observing System Chemistry Climate Model (GEOS CCM) to study the pertubations on the stratospheric meteorology induced by an aerosol injection of the magnitude of the PNE. Our simulations include the radiative interactions of aerosols, so that their impact on temperatures and winds are explicitly simulated. We show how the presence of the carbonaceous aerosols from the pyroCb causes the formation and maintenance of a synoptic scale stratospheric anticyclone. We follow this disturbance considering the potential vorticity anomaly and the brown carbon aerosol loading and we describe its dynamical and thermodynamical structure and its evolution in time. The analysis presented here shows that the simulated anticyclone undergoes daily expansion-compression cycles governed by the radiative heating, which are directly related to the vertical motion of the plume, and that the aerosol radiative heating is essential in maintaining the anticyclone itself.

Pyrocumulonimbus↗
NASA NTRS2018

The Impact of MISR-Derived Injection Height Initialization on Wildfire and Volcanic Plume Dispersion in the HYSPLIT Model

The dispersion of particles from wildfires, volcanic eruptions, dust storms, and other aerosol sources can affect air quality and other environmental factors downwind. Aerosol injection height is one source attribute that mediates downwind dispersion, as wind speed and direction can vary dramatically with elevation. Using plume heights derived from space-based, multi-angle imaging, we examine the impact of initializing plumes with satellite-measured vs. nominal (model-calculated or VAAC observations) injection height on the simulated dispersion of six large aerosol plumes. When there are significant differences in nominal vs. satellite-derived particle injection heights, or if one injection height is within the planetary boundary layer (PBL) and the other is above the PBL, differences in simulation results can arise. In the cases studied with significant nominal vs. satellite-derived injection height differences, the NOAA Air Resources Laboratory's Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model tends to represent plume evolution better if the injection height in the model is constrained by hyper-stereo satellite retrievals.

Plume heights↗
NASA NTRS1982

Aerosol measurements from earth orbiting spacecraft

The global aerosol data base evolving from monitoring being done by Stratospheric Aerosol Measurement (SAM) II and Stratospheric Aerosol and Gas Experiment (SAGE) since the fall of 1978 is presented. Data reveal that polar stratospheric clouds (PSC) enhance extinction and optical depths by up to two orders of magnitude and an order of magnitude, respectively. These data are over background 1000 nm values of approximately 1.2 x 10 to the -4th per km, and 1.3 x 10 to the -3rd, respectively. SAGE has offered, for the first time, quantitative measurements of volcanic eruptions on a nearly global basis, and estimates are given for the amount of aerosol injected into the stratosphere from each volcano. For example, Northern Hemisphere aerosol was enhanced by more than 100% by the 1980 eruption of Mount St. Helens, which produced about 0.32 x 10 to the 6th metric tons of aerosol. A cirrus cloud data base is being developed which will be useful in earth radiation and water vapor budget studies. Cross-section, contour, and temperature variation diagrams are included.

Mccormick, M. P.↗
NASA NTRS1994

Lidar observation of ozone over Tsukuba (36 deg N, 140 deg E)

An ozone lidar system was installed at the National Institute for Environmental Studies (NIES) in Tsukuba, Japan in March 1988 and has been measuring vertical profiles of ozone (15 - 45 km) since September 1988. The lidar system consists of a XeCl (308 nm) excimer laser, its deuterium Raman shifter (339 nm), a XeF excimer laser (351 nm), a 2 m telescope, a receiving system and a data processing system. The precision of the derived ozone concentration is about 10 percent of an altitude of 40 km for a 4 hr observation. Temperature profiles (30 - 80 km) are also obtained from the Rayleigh scattering signals at 351 nm. Approximate 50 ozone measurements are carried out in a year and variations of vertical profiles of ozone such as seasonal variations and shorter-term variations are observed. Systematic errors due to aerosols had been negligible until the arrival of the stratospheric aerosols injected by the eruption of Mt. Pinatubo. Effects of the volcanic aerosols on ozone measurements depend on the differences between wavelengths used as the on- and off-resonance.

Nakane, H.↗
NASA NTRS2019

MAIAC Thermal Technique for Smoke Injection Height from MODIS

We present a new algorithm to derive smoke plume height (Ha) using thermal contrast from the rising mixture of aerosol and emitted gases in the MODIS 11m channel. Validation shows good agreement with wind-corrected MISR-MINX values, with about 60% of the MODIS Terra thermal retrievals within 500m of MISR Ha, and 450m lower on average. The bias is expected because the thermal technique represents an effective rather than a top plume height from MISR MINX. Comparison of MODIS Aqua retrievals with CALIOP CALIPSO shows similar statistics, with standard deviation of 458m for the mean plume height and 216m lower on average. Ha is part of the MAIAC MODIS Collection 6 suite of products (MCD19), accessible via the Land Product Distributed Active Archive Center (LP DAAC). Aerosol injection height is reported in the daily MAIAC atmospheric product MCD19A2 along with the cloud mask, column water vapor, aerosol optical depth, AOD uncertainty and aerosol type, at 1km resolution on global Sinusoidal grid. Despite some limitations, the vastly increased coverage from MODIS observations makes it a valuable dataset complementing the established MISR and CALIOP products.

atmosphere↗
NASA NTRS2024

Substantial Cooling Effect From Aerosol-Induced Increase in Tropical Marine Cloud Cover

With global warming currently standing at approximately +1.2 °C since preindustrial times, climate change is a pressing global issue. Marine cloud brightening is one proposed method to tackle warming through injecting aerosols into marine clouds to enhance their reflectivity and thereby planetary albedo. However, because it is unclear how aerosols influence clouds, especially cloud cover, both climate projections and the effectiveness of marine cloud brightening remain uncertain. Here, we use satellite observations of volcanic eruptions in Hawaii to quantify the aerosol fingerprint on tropical marine clouds. We observe a large enhancement in reflected sunlight, mainly due to an aerosol-induced increase in cloud cover. This observed strong negative aerosol forcing suggests that the current level of global warming is driven by a weaker net radiative forcing than previously thought, arising from the competing effects of greenhouse gases and aerosols. This implies a greater sensitivity of Earth’s climate to radiative forcing and therefore a larger warming response to both rising greenhouse gas concentrations and reductions in atmospheric aerosols due to air quality measures. However, our findings also indicate that mitigation of global warming via marine cloud brightening is plausible and is most effective in humid and stable conditions in the tropics where solar radiation is strong.

Atmospheric science↗
NASA NTRS2001

Effect of Aerosols on Cloud Field with Satellite-Derived Data and GCM Simulation

Numerical experiment was performed using an general circulation model (GCM) including aerosol indirect effect into water cloud and the simulated global distribution of cloud droplet radii was compared with the global distribution of cloud effective radii retrieved from Advanced Very High Resolution Radiometer (AVHRR). Comparisons of GCM calculation with AVHRR retrieval showed that our GCM generally can simulate the global characteristics of cloud droplet radii such as a land-sea contrast associated with difference of aerosol abundance and coastal region feature due to aerosol injection from adjacent continental area. AVHRR retrieval and GCM simulation, however, are turned out to show disagreement over tropical region. AVHRR retrieval may tend to overestimate droplet radii due to the contamination of signal by drizzles and ice particles, whereas our GCM does not treat aerosol indirect effect in deep convective clouds predominant over tropics. Over equatorial central Pacific, where satellite retrieval may suffer from statistical biases, satellite retrieval and GCM simulation are also found to be different. Keywords: aerosol indirect effect

Suzuki, Kentaroh↗
NASA NTRS1989

Effect of volcanic debris on stratospheric ion conductivity

The reduction is reported of stratospheric ion conductivities in the altitude range of 20 to 27 km attributable to the aerosols injected into the stratosphere by the eruption of volcano Nevado Del Ruiz on November 13, 1985. Three balloon experiments were conducted from Hyderabad, India (17.5 N, 78.6 E) carrying a Langmuir probe payload for measuring stratospheric ion conductivities. The first flight took place about 9 months before the volcanic eruption, the second 3 weeks after the eruption and the third about a year later. Lidar observations from Japan, Hawaii and Europe reported detection of aerosol layers in the 18 to 25 km altitude range attributable to the Nevado Del Ruiz volcanic eruption. A comparison of the conductivity profiles shows that the reduction of ion conductivities is: 57.3 percent at 20 km and 31 percent at 25 km. A year after the eruption, conductivities at all heights tended to recover.

Somayajulu, Y. V.↗
NASA NTRS1976

Wind tunnel flow seeding for laser velocimetry applications

Flow-seeding requirements for wind tunnel studies of subsonic and transonic flow fields are discussed with reference to laser velocimeter applications. Design of an aerosol generator with an output flow rate of 60 scfm is presented. The generated aerosol is fairly monodisperse; tracer particle diameter can be varied from 0.2 to 0.5 micron; and seeding density can be varied from 100 to 10,000 particles/cu sec. Experimental data on the use of this aerosol generator with various aerosol injection mechanisms indicate that the method is suitable for wind tunnel flow seeding.

Mazumder, M. K.↗
NASA NTRS1982

The formulation of Lamb's Dust Veil Index

A catalog of the major explosive volcanic eruptions since 1500 AD and formulated the Dust Veil Index (DVI) is presented. The DVI quantifies the impact on the Earth's energy balance of changes in atmospheric composition due to explosive volcanic eruptions. The DVI for a particular eruption quantifies the climatic impact of the dust and aerosol injection from the eruption integrated over the years following the event. The formulation of the DVI is described. All references are to Lamb (1970). A distinction is made between the catalog of volcanic activity, and the tabulation of the northern hemisphere DVI apportioned over the years. The DVI data are updated to 1975 for any particular eruption, the catalog gives three DVI values: global, Southern Hemisphere, and Northern Hemisphere. The global DVI given in the catalog is considered. The other two DVIs relate to the impact on the hemispheres considered separately and their estimation involves an additional factor apportioning the dust veil between the hemispheres on the basis of the latitude of injection.

Kelly, P. M.↗
NASA NTRS2019

Optimizing Umkehr Ozone Profile Retrievals

NOAA Dobson Umkehr ozone profile records have been collected since the 1970s. Umkehr ozone profiles are used to monitor stratospheric ozone recovery predicted to occur by the 2050s. Current operational Dobson Umkehr profile algorithms produce data that have uncertainty on the order of ~ 5 % in the stratosphere. However, when large volcanic eruptions inject aerosols into the stratosphere, the errors can be as large as 70 %. In order to evaluate Umkehr records for aerosol-related and instrumental artifacts, we compare observations with a Hindcast simulation of the NASA Merra-2 Global Modeling Initiative (GMI) Replay (M2GMI, Orbe et al, 2017; Wargan et al, 2018) and Chemistry Transport Model (GMI CTM, Strahan et al, 2013, Strahan et al, 2016). The biases found between the models and observations are summarized for each Dobson calibration and volcanic eruption period, thus providing a reference tool for homogenization of the Umkehr time series and removal of volcanic aerosol errors.

Petropavlovskikh, I.↗
NASA NTRS2012

Sensitivity of Stratospheric Geoengineering with Black Carbon to Aerosol Size and Altitude of Injection

Simulations of stratospheric geoengineering with black carbon (BC) aerosols using a general circulation model with fixed sea surface temperatures show that the climate effects strongly depend on aerosol size and altitude of injection. 1 Tg BC/a injected into the lower stratosphere would cause little surface cooling for large radii but a large amount of surface cooling for small radii and stratospheric warming of over 60 C. With the exception of small particles, increasing the altitude of injection increases surface cooling and stratospheric warming. Stratospheric warming causes global ozone loss by up to 50% in the small radius case. The Antarctic shows less ozone loss due to reduction of polar stratospheric clouds, but strong circumpolar winds would enhance the Arctic ozone hole. Using diesel fuel to produce the aerosols is likely prohibitively expensive and infeasible. Although studying an absorbing aerosol is a useful counterpart to previous studies involving sulfate aerosols, black carbon geoengineering likely carries too many risks to make it a viable option for deployment.

Kravitz, Ben↗
NASA NTRS2014

Stereoscopic Retrieval of Smoke Plume Heights and Motion from Space-Based Multi-Angle Imaging, Using the MISR INteractive eXplorer(MINX)

Airborne particles desert dust, wildfire smoke, volcanic effluent, urban pollution affect Earth's climate as well as air quality and health. They are found in the atmosphere all over the planet, but vary immensely in amount and properties with season and location. Most aerosol particles are injected into the near-surface boundary layer, but some, especially wildfire smoke, desert dust and volcanic ash, can be injected higher into the atmosphere, where they can stay aloft longer, travel farther, produce larger climate effects, and possibly affect human and ecosystem health far downwind. So monitoring aerosol injection height globally can make important contributions to climate science and air quality studies. The Multi-angle Imaging Spectro-Radiometer (MISR) is a space borne instrument designed to study Earths clouds, aerosols, and surface. Since late February 2000 it has been retrieving aerosol particle amount and properties, as well as cloud height and wind data, globally, about once per week. The MINX visualization and analysis tool complements the operational MISR data products, enabling users to retrieve heights and winds locally for detailed studies of smoke plumes, at higher spatial resolution and with greater precision than the operational product and other space-based, passive remote sensing techniques. MINX software is being used to provide plume height statistics for climatological studies as well as to investigate the dynamics of individual plumes, and to provide parameterizations for climate modeling.

aerosols↗