SEARCH · Engineering Papers
Results for “Accelerators,ACCPHY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Establishing reliable good initial quantum efficiency and in-situ laser cleaning for the copper cathodes in the RF gun
Abstract is not provided
A method for simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data
We propose a method to simultaneously correct linear optics errors and linear coupling for storage rings using turn-by-turn (TbT) beam position monitor (BPM) data. The independent component analysis (ICA) method is used to isolate the betatron normal modes from the measured TbT BPM data. The betatron amplitudes and phase advances of the projections of the normal modes on the horizontal and vertical planes are then extracted, which, combined with dispersion measurement, are used to fit the lattice model. The fitting results are used for lattice correction. The method has been successfully demonstrated on the NSLS-II storage ring.
Observation of acceleration and deceleration in gigaelectron-volt-per-metre gradient dielectric wakefield accelerators
There is urgent need to develop new acceleration techniques capable of exceeding gigaelectron-volt-per-metre (GeV m –1 ) gradients in order to enable future generations of both light sources and high-energy physics experiments. To address this need, short wavelength accelerators based on wakefields, where an intense relativistic electron beam radiates the demanded fields directly into the accelerator structure or medium, are currently under intense investigation. One such wakefield based accelerator, the dielectric wakefield accelerator, uses a dielectric lined-waveguide to support a wakefield used for acceleration. Here we show gradients of 1.347±0.020 GeV m –1 using a dielectric wakefield accelerator of 15 cm length, with sub-millimetre transverse aperture, by measuring changes of the kinetic state of relativistic electron beams. We follow this measurement by demonstrating accelerating gradients of 320±17 MeV m –1 . As a result, both measurements improve on previous measurements by and order of magnitude and show promise for dielectric wakefield accelerators as sources of high-energy electrons.
Echo-enabled harmonics up to the 75th order from precisely tailored electron beams
The production of coherent radiation at ever shorter wavelengths has been a long-standing challenge since the invention of lasers1, 2 and the subsequent demonstration of frequency doubling3. Modern X-ray free-electron lasers (FELs) use relativistic electrons to produce intense X-ray pulses on few-femtosecond timescales4, 5, 6. However, the shot noise that seeds the amplification produces pulses with a noisy spectrum and limited temporal coherence. To produce stable transform-limited pulses, a seeding scheme called echo-enabled harmonic generation (EEHG) has been proposed7, 8, which harnesses the highly nonlinear phase mixing of the celebrated echo phenomenon9 to generate coherent harmonic density modulations in the electron beam with conventional lasers. Here, we report on a demonstration of EEHG up to the 75th harmonic, where 32 nm light is produced from a 2,400 nm laser. We also demonstrate that individual harmonic amplitudes are controlled by simple adjustment of the phase mixing. Results show the potential of laser-based manipulations to achieve precise control over the coherent spectrum in future X-ray FELs for new science10, 11.
Polarization control in an X-ray free-electron laser
X-ray free-electron lasers are unique sources of high-brightness coherent radiation. However, existing devices supply only linearly polarized light, precluding studies of chiral dynamics. A device called the Delta undulator has been installed at the Linac Coherent Light Source (LCLS) to provide tunable polarization. With a reverse tapered planar undulator line to pre-microbunch the beam and the novel technique of beam diverting, hundreds of microjoules of circularly polarized X-ray pulses are produced at 500–1,200 eV. These X-ray pulses are tens of femtoseconds long, have a degree of circular polarization of 0.98 –0.04 +0.02 at 707 eV and may be scanned in energy. We also present a new two-colour X-ray pump–X-ray probe operating mode for the LCLS. As a result, energy differences of ΔE/E = 2.4% are supported, and the second pulse can be adjusted to any elliptical polarization. In this mode, the pointing, timing, intensity and wavelength of the two pulses can be modified.
Compact Laser-Plasma-Accelerator-Driven Free-Electron Laser using a Transverse Gradient Undulator
Abstract Not Provided
RF thermal and new cold part design studies on TTF-III input coupler for Project-X
An RF power coupler is one of the key components in a superconducting (SC) linac. It provides RF power to the SC cavity and interconnects different temperature layers (1.8 K, 4.2 K, 70 K and 300 K). The TTF-III coupler is one of the most promising candidates for the High Energy (HE) linac of Project X, but it cannot meet the average power requirements because of the relatively high temperature rise on the warm inner conductor, so some design modifications will be required. In this paper, we describe our simulation studies on the copper coating thickness on the warm inner conductor with RRR values of 10 and 100. Our purpose is to rebalance the dynamic and static loads, and finally lower the temperature rise along the warm inner conductor. Additionally, to get stronger coupling, better power handling and less multipacting probability, one new cold part design was proposed using a 60 mm coaxial line; the corresponding multipacting simulation studies have also been investigated.
Ground motion improvements in SPEAR3
SPEAR3 is a third-generation synchrotron light source storage ring, about 234 meters in circumference. To meet the beam stability requirement, our goal is to ultimately achieve an orbit variation (relative to the photon beam lines) of less than 10% of the beam size, which is about 1 micron in the vertical plane. Hydrostatic leveling system (HLS) measurements show that the height of the SPEAR3 tunnel floor can vary by tens of microns daily without thermal insulation improvements. We present an analysis of the HLS data that shows that adding thermal insulation to the concrete walls of the storage ring tunnel dramatically decreased diurnal tunnel floor motion.
Design of a 6 TeV muon collider
Here, a preliminary design of a muon collider ring with the center of mass (CM) energy of 6 TeV is presented. The ring circumference is 6.3 km, and the $\beta$ functions at collision point are 1 cm in each plane. The ring linear optics, the non-linear chromaticity compensation in the Interaction Region (IR), and the additional non-linear orthogonal correcting knobs are described. Magnet specifications are based on the maximum pole-tip field of 20T in dipoles and 15T in quadrupoles. Careful compensation of the non-linear chromatic and amplitude dependent effects provide a sufficiently large dynamic aperture for the momentum range of up to $\pm$0.5% without considering magnet errors.
Microbunching-instability-induced sidebands in a seeded free-electron laser
Not Available
Experimental measurements of rf breakdowns and deflecting gradients in mm-wave metallic accelerating structures
Not Available
Beam shaping to improve the free-electron laser performance at the Linac Coherent Light Source
Not Available
Analytical approach to chromatic correction in the final focus system of circular colliders
Not Available
rf breakdown measurements in electron beam driven 200 GHz copper and copper-silver accelerating structures
Not Available
Generation of high-power, tunable terahertz radiation from laser interaction with a relativistic electron beam
Not Available
Beam ion instability: Measurement, analysis, and simulation
A weak vertical coupled-bunch instability with oscillation amplitude of the order of a few μ m has been observed in SPEAR3 at nominal vacuum pressure. The instability becomes stronger with increasing neutral gas pressure as observed by turning off vacuum pumps, and becomes weaker when the vertical beam emittance is increased. These observations indicate that the vertical beam motion is driven by ions trapped in the periodic potential of the electron beam. In this paper we present a series of comprehensive beam measurements, impedance-based stability analysis, and numerical simulations of beam-ion interactions in SPEAR3. The effects of vacuum pressure, gas species, beam current, bunch fill pattern, chromaticity, and vertical beam emittance are investigated.