Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOMIC RESEARCH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Atomic research

Work performed by the University of Alabama in Huntsville's (UAH) Center for Applied Optics (CAO) entitled Atomic Research is documented. Atomic oxygen (AO) effects on materials have long been a critical concern in designing spacecraft to withstand exposure to the Low Earth Orbit (LEO) environment. The objective of this research effort was to provide technical expertise in the design of instrumentation and experimental techniques for analyzing materials exposed to atomic oxygen in accelerated testing at NASA/MSFC. Such testing was required to answer fundamental questions concerning Space Station Freedom (SSF) candidate materials and materials exposed to atomic oxygen aboard the Long-Duration Exposure Facility (LDEF). The primary UAH task was to provide technical design, review, and analysis to MSFC in the development of a state-of-the-art 5eV atomic oxygen beam facility required to simulate the RAM-induced low earth orbit (LEO) AO environment. This development was to be accomplished primarily at NASA/MSFC. In support of this task, contamination effects and ultraviolet (UV) simulation testing was also to be carried out using NASA/MSFC facilities. Any materials analysis of LDEF samples was to be accomplished at UAH.

Hadaway, James B.↗
DOE OSTI2014

Design and construction of a research atomic layer deposition system for in situ infrared and electron spectroscopies

A description is given of an ultra-high vacuum surface-analysis chamber that incorporates an internal cell for performing atomic layer deposition at a pressure of up to ∼1 Torr. The apparatus permits the growth process to be interrupted in stages during which data can be obtained using infrared and x-ray photoemission spectroscopies together with other electron-based techniques. Demonstration results are given for the adsorption of H{sub 2}O on Si (100) at a pressure of ∼0.3 Torr. The system described is generally applicable in the study of any surface reaction under non-high-vacuum conditions in which there is a need for both infrared and electron spectroscopies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

A platform for non-local thermodynamic equilibrium atomic physics research using the buried layer target approach at a kJ level laser facility

Here we present a design and first use of a kJ level laser facility for research of non-local thermodynamic equilibrium atomic physics using the buried layer target method. The target design included a metal layer buried inside a plastic tamper with thicknesses tailored to the expected laser intensities. The target was illuminated from each side by two laser beams with intensities of 0.5–5 × 10 14 W/cm 2 . The advanced diagnostic suite included static and time-resolved imagers and spectrometers with various spectral resolutions. A 3D printed dual elliptically curved spectrometer is presented, and its results are compared to a traditional crystal spectrometer. Experimental results and radiation hydrodynamic simulations demonstrate that the target achieved the desired thermodynamic conditions of n e ≈ 10 21 –10 22 cm -3 and T e ≈ 1–2 keV.

3D printing↗
NASA NTRS1966

Atomic physics

Atomic research on metastable atoms, resonance spectroscopy, and collision phenomena

NUCLEAR PHYSICS↗
DOE OSTI2017

Integrating Novel Microscopy into Battery Research: From Atomic Resolution to In Situ and Functional Imaging

Regardless of their different configurations and chemistries, current energy-storage systems, e.g. Li-ion, Li-S, Li-air, and all-solid-state Li batteries, rely on the use of solid-state ion conducting materials as electrodes and/or electrolytes. Continuous ion hopping from one mobile ion site to adjacent vacancy sites in a crystalline lattice forms the basis for ion conduction in solids. Atomic-scale factors, such as lattice structure and the concentration and distribution of mobile carriers and vacancies, decide the ion conductivity in solids, and thus dictate the rate capability and capacity in batteries.

25 ENERGY STORAGE↗
DOE OSTI2016

Specialized probes based on hydroxyapatite calcium for heart tissues research by atomic force microscopy

The new specialized AFM-probes with hydroxyapatite structures for atomic force microscopy of heart tissues calcification were created and studied. A process of probe fabrication is demonstrated. The adhesive forces between specialized hydroxyapatite probe and endothelium/subendothelial layers were investigated. It was found that the adhesion forces are significantly higher for the subendothelial layers. We consider that it is connected with the formation and localization of hydroxyapatite in the area of subendothelial layers of heart tissues. In addition, the roughness analysis and structure visualization of the endothelial surface of the heart tissue were carried out. The results show high efficiency of created specialized probes at study a calcinations process of the aortic heart tissues.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1982

Photoionization research on atomic beams. 2: The photoionization cross section of atomic oxygen

An experiment to determine the absolute value of the photo-ionization cross section of atomic oxygen is described. The atoms are produced in an electrical discharge in oxygen gas with 1% hydrogen added. In order to prevent recombination a crossed beam technique is employed. The ions formed are detected by a time-of-flight mass spectrometer. The concentration of oxygen atoms in the beam is 57%. The measured photoionization cross section of atomic oxygen is compared with theoretical data. The results show the participation of autoionization processes in ionization. The cross section at the autoionizing levels detected is considerably higher than the absorption due to the unperturbed continuum. Except for wavelengths where autoionization occurs, the measured ionization cross section is in fair agreement with theory. This holds up to 550 A whereas for shorter wavelengths the theoretical values are much higher.

Comes, F. J.↗
NASA NTRS1985

Experimental study of the spray characteristics of a research airblast atomizer

Airblast atomization was studied using a especially designed atomizer in which the liquid first impinges on a splash plate, then is directed radially outward and is atomized by the air passing through two concentric, vaned swirlers that swirl the air in opposite directions. The effect of flow conditions, air mass velocity (mass flow rate per unit area) and liquid to air ratio on the mean drop size was studied. Seven different ethanol solutions were used to simulate changes in fuel physical properties. The range of atomizing air velocities was from 30 to 80 m/s. The mean drop diameter was measured at ambient temperature (295 K) and atmospheric pressure.

Acosta, W. A.↗
NASA NTRS1985

Experimental study of the spray characteristics of a research airblast atomizer

Airblast atomization was studied using a especially designed atomizer in which the liquid first impinges on a splash plate, then is directed radically outward and is atomized by the air passing through two concentric, vaned swirlers that swirl the air in opposite directions. The effect of flow conditions, air mass velocity (mass flow rate per unit area) and liquid to air ratio on the mean drop size was studied. Seven different ethanol solutions were used to simulate changes in fuel physical properties. The range of atomizing air velocities was from 30 to 80 m/s. The mean drop diameter was measured at ambient temperature (295 K) and atmospheric pressure.

Acosta, W. A.↗
DOE OSTI2015

HOW TO RUN A CONTROL ROOM SIMULATOR RESEARCH STUDY

The design and modernization of main control rooms in nuclear power plants benefits considerably from high-fidelity simulator research. These research simulators may be faithful replicas of existing control rooms or may represent advanced prototypes for future implementation. The recent availability of low-cost training simulators has made the entry point to using simulators in research much more achievable. Yet, the acquisition of a training or research simulator is only the first step to carrying out successful simulator studies. This panel brings together four current human factors researchers who are involved in conducting studies using control room simulators for nuclear power plants. The goal of the panel is to present the uses of research simulators, research methods and measures, and tips and tricks for running a simulator study from four separate research institutions. Each presenter explains their research configuration as well as research philosophy and practices. Korea Atomic Research Institute (KAERI) and OECD Halden Reactor Project, two research institutes with a long history of running simulator studies, present their experiences and insights gained from many simulator studies. Idaho National Laboratory (INL) and the Center for Advanced Engineering Research (CAER), two research institutes who have freshly started simulator research, chronicle their recent installations and studies. Each presenter provides an overview presentation of simulator research conducted at their institution followed by a panel discussion based on audience questions. This panel represents the opportunity for other researchers who are newly undertaking simulator studies to learn the human factors considerations for simulator research from existing researchers.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2012

Hot Canyon

This historical film footage, originally produced in the early 1950s as part of a series by WOI-TV, shows atomic research at Ames Laboratory. The work was conducted in a special area of the Laboratory known as the "Hot Canyon".

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗