Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASTRON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Probing modifications of general relativity using current cosmological observations

We test general relativity (GR) using current cosmological data: the CMB from WMAP5 [E. Komatsu et al. (WMAP Collaboration), Astrophys. J. Suppl. Ser. 180, 330 (2009)], the integrated Sachs-Wolfe (ISW) effect from the cross correlation of the CMB with six galaxy catalogs [T. Giannantonio et al., Phys. Rev. D 77, 123520 (2008)], a compilation of supernovae (SNe) type Ia including the latest Sloan Digital Sky Survey SNe [R. Kessler et al., Astrophys. J. Suppl. Ser. 185, 32 (2009).], and part of the weak lensing (WL) data from the Canada-Franco-Hawaii Telescope Legacy Survey [L. Fu et al., Astron. Astrophys. 479, 9 (2008); M. Kilbinger et al., Astron. Astrophys. 497, 677 (2009).] that probe linear and mildly nonlinear scales. We first test a model in which the effective Newtonian constant {mu} and the ratio of the two gravitational potentials, {eta}, transit from the GR value to another constant at late times; in this case, we find that GR is fully consistent with the combined data. The strongest constraint comes from the ISW effect which would arise from this gravitational transition; the observed ISW signal imposes a tight constraint on a combination of {mu} and {eta} that characterizes the lensing potential. Next, we consider four pixels in time and space for each function {mu} and {eta}, and perform a principal component analysis, finding that seven of the resulting eight eigenmodes are consistent with GR within the errors. Only one eigenmode shows a 2{sigma} deviation from the GR prediction, which is likely to be due to a systematic effect. However, the detection of such a deviation demonstrates the power of our time- and scale-dependent principal component analysis methodology when combining observations of structure formation and expansion history to test GR.

79 ASTRONOMY AND ASTROPHYSICS↗

Properties of the exact analytic solution of the growth factor and its applications

There have been the approximate analytic solution [V. Silveira and I. Waga, Phys. Rev. D 50, 4890 (1994).] and several approximate analytic forms [W. J. Percival, Astron. Astrophys. 443, 819 (2005).][S. M. Carroll, W. H. Press, and E. L. Turner, Annu. Rev. Astron. Astrophys. 30, 499 (1992).][S. Basilakos, Astrophys. J. 590, 636 (2003).] of the growth factor D{sub g} for the general dark energy models with the constant values of its equation of state {omega}{sub de} after Heath found the exact integral form of the solution of D{sub g} for the Universe including the cosmological constant or the curvature term. Recently, we obtained the exact analytic solutions of the growth factor for both {omega}{sub de}=-1 or -(1/3)[S. Lee and K.-W. Ng, arXiv:0905.1522.] and the general dark energy models with the constant equation of state {omega}{sub de}[S. Lee and K.-W. Ng, Phys. Lett. B 688, 1 (2010).] independently. We compare the exact analytic solution of D{sub g} with the other well known approximate solutions. We also prove that the analytic solutions for {omega}{sub de}=-1 or -(1/3) in [S. Lee and K.-W. Ng, arXiv:0905.1522.] are the specific solutions of the exact solutions of the growth factor for general {omega}{sub de} models in [S. Lee and K.-W. Ng, Phys. Lett. B 688, 1 (2010).] even though they look quite different. Comparison with the numerical solution obtained from the public code is done. We also investigate the possible extensions of the exact solution of D{sub g} to the time-varying {omega}{sub de} for the comparison with observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Techniques for studying materials under extreme states of high energy density compression

The properties of materials under extreme conditions of pressure and density are of key interest to a number of fields, including planetary geophysics, materials science, and inertial confinement fusion. In geophysics, the equations of state of planetary materials, such as hydrogen and iron, under ultrahigh pressure and density provide a better understanding of their formation and interior structure [Celliers et al., “Insulator-metal transition in dense fluid deuterium,” Science 361, 677–682 (2018) and Smith et al., “Equation of state of iron under core conditions of large rocky exoplanets,” Nat. Astron. 2, 591–682 (2018)]. The processes of interest in these fields occur under conditions of high pressure (100 GPa–100 TPa), high temperature (>3000 K), and sometimes at high strain rates (>103 s−1) depending on the process. With the advent of high energy density (HED) facilities, such as the National Ignition Facility (NIF), Linear Coherent Light Source, Omega Laser Facility, and Z, these conditions are reachable and numerous experimental platforms have been developed. To measure compression under ultrahigh pressure, stepped targets are ramp-compressed and the sound velocity, measured by the velocity interferometer system for any reflector diagnostic technique, from which the stress-density of relevant materials is deduced at pulsed power [M. D. Knudson and M. P. Desjarlais, “High-precision shock wave measurements of deuterium: Evaluation of exchange-correlation functionals at the molecular-to-atomic transition,” Phys. Rev. Lett. 118, 035501 (2017)] and laser [Smith et al., “Equation of state of iron under core conditions of large rocky exoplanets,” Nat. Astron. 2, 591–682 (2018)] facilities. To measure strength under high pressure and strain rates, experimenters measure the growth of Rayleigh–Taylor instabilities using face-on radiography [Park et al., “Grain-size-independent plastic flow at ultrahigh pressures and strain rates,” Phys. Rev. Lett. 114, 065502 (2015)]. The crystal structure of materials under high compression is measured by dynamic x-ray diffraction [Rygg et al., “X-ray diffraction at the national ignition facility,” Rev. Sci. Instrum. 91, 043902 (2020) and McBride et al., “Phase transition lowering in dynamically compressed silicon,” Nat. Phys. 15, 89–94 (2019)]. Medium range material temperatures (a few thousand degrees) can be measured by extended x-ray absorption fine structure techniques, Yaakobi et al., “Extended x-ray absorption fine structure measurements of laser-shocked V and Ti and crystal phase transformation in Ti,” Phys. Rev. Lett. 92, 095504 (2004) and Ping et al., “Solid iron compressed up to 560 GPa,” Phys. Rev. Lett. 111, 065501 (2013), whereas more extreme temperatures are measured using x-ray Thomson scattering or pyrometry. This manuscript will review the scientific motivations, experimental techniques, and the regimes that can be probed for the study of materials under extreme HED conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved electron collisional line broadening for low-temperature ions and neutrals in plasma modeling

In this study, electron collisional broadening of observed spectral lines depends on plasma electron temperature and density. Including this effect in models of measured spectra is necessary to determine plasma conditions; however, computational limits make accurate line broadening treatments difficult to implement in large-scale plasma modeling efforts. In this paper, we report on improvements to the treatment of electron collisional line broadening and illustrate this with calculations using the Los Alamos ATOMIC code. We implement the Dimitrijevic and Konjevic modified semi-empirical model Dimitrijevic and Konjevic (1986 Astron. and Astrophy. 163 297 and 1987 Astron. Astrophys. 172 345), which we amend by employing oscillator strengths from Hartree–Fock calculations. This line broadening model applies to near-neutral plasmas with electron temperatures of Te ~ 1 eV and electron densities of N e ~10 17 cm -3 . We evaluate the D.K.-inspired model against the previous hydrogenic approach in ATOMIC through comparison to NIST-rated measurements for selected neutral and singly-ionized Ca, O, Fe, and Sn lines using both fine-structure and configuration-averaged oscillator strengths. The new D.K.-inspired model is significantly more accurate than the previous hydrogenic model and we find the use of configuration-averaged oscillator strengths a good approximation for applications such as LIBS (laser induced breakdown spectroscopy), for which we demonstrate the use of the D.K.-inspired model.

74 ATOMIC AND MOLECULAR PHYSICS↗

High Energy Instrumentation Efforts in Turkey

This work summarizes the efforts in Turkey to build a laboratory capable of building and testing high energy astrophysics detectors that work in space. The EC FP6 ASTRONS project contributed strongly to these efforts, and as a result a fully operational laboratory at Sabanci University have been developed. In this laboratory we test and develop Si and CdZnTe based room temperature semiconductor strip detectors and develop detector and electronics system to be used as a payload on potential small Turkish satellites.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Full calibration of the tomographic redshift distribution from the HSC PDR3 Shape Catalog with DESI

The calibration of tomographic redshift distributionsis essential for cosmological analysis of weak lensing data.In this work, we calibrate all four tomographic bins of the Hyper Suprime Camera (HSC) weak lensing catalog with the Dark Energy Spectroscopic Instrument (DESI) Data Release 1 and 2 using the clustering redshifts technique. We include z > 1.2 redshift sources such as emission line galaxies (ELG) and quasars (QSO) sources in our calibration, which were not available in the previous HSC calibration (Rau et al. (2022), Mon. Not. Roy. Astron. Soc. 524 (2023) 5109), allowing a complete calibration of all the redshift bins. We find the first tomographic bin exhibits a small shift towards low redshifts. The second bin is in good agreement with the photometric calibration, while third and fourth bin exhibit a shift towards higher redshifts. However, these shifts are considerably smaller than the shifts obtained in the HSC Year 3 cosmic shear analyses. We evaluate the impact of galaxy bias and magnification effects from all the samples on the measurements, finding them to be small, and we propose corrections to reduce them further. Specifically, we relax the assumption of linear bias and only assume no redshift evolution of the cross-correlation coefficient, allowing us to leverage smaller clustering scales. We model the redshift distributions with splines and compare our results to previous analyses as well as to other parameterizations found in literature. For the two high-redshift tomographic bins, we find the shifts to higher redshifts with respect to the measurements performed in Rau+2022 to be Δz$_{3}$ =-0.039$^{+0.020}$$_{-0.021}$ and Δz$_{4}$ = -0.048$^{+0.012}$$_{-0.012}$.

Choppin de Janvry, J. [LBL, Berkeley; UC, Berkeley↗

Finite axisymmetric charged dust disks in conformastatic spacetimes

An infinite family of axisymmetric charged dust disks of finite extension is presented. The disks are obtained by solving the vacuum Einstein-Maxwell equations for conformastatic spacetimes, which are characterized by only one metric function. In order to obtain the solutions, a functional relationship between the metric function and the electric potential is assumed. It is also assumed that the metric function is functionally dependent on another auxiliary function, which is taken as a solution of the Laplace equation. The solutions for the auxiliary function are then taken as given by the infinite family of generalized Kalnajs disks recently obtained by Gonzalez and Reina [G. A. Gonzalez and J. I. Reina, Mon. Not. R. Astron. Soc. 371, 1873 (2006).], expressed in terms of the oblate spheroidal coordinates and corresponding to a family of well-behaved Newtonian axisymmetric thin disks of finite radius. The obtained relativistic thin disks have a charge density that is equal, except maybe by a sign, to their mass density, in such a way that the electric and gravitational forces are in exact balance. The energy density of the disks is everywhere positive and well behaved, vanishing at the edge. Accordingly, as the disks are made of dust, their energy-momentum tensor agrees with all the energy conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

Exact analytical solution of the linear structure growth rate in {Lambda}CDM cosmology and its cosmological applications

We derive the exact analytical solution of the linear structure growth rate in {Lambda}CDM cosmology with flat or curved geometry, under the Newtonian gauge. Unlike the well known solution under the Newtonian limit [D. J. Heath, Mon. Not. R. Astron. Soc. 179, 351 (1977)], our solution takes all general relativistic corrections into account and is hence valid at both the sub- and superhorizon scales. With this exact solution, we evaluate cosmological impacts induced by these relativistic corrections. (1) General relativistic corrections alter the density growth from z=100 to z=0 by 10% at k=0.01 h/Mpc and the impact becomes stronger toward larger scales. We caution the readers that the overdensity is not gauge invariant and the above statement is restrained to the Newtonian gauge. (2) Relativistic corrections introduce a k{sup -2} scale dependence in the density fluctuation. It mimics a primordial non-Gaussianity of the local type with f{sub NL}{sup local{approx}}1. This systematical error may become non-negligible for future all sky deep galaxy surveys. (3) Cosmological simulations with box size greater than 1 Gpc are also affected by these relativistic corrections. We provide a postprocessing recipe to correct for these effects. (4) These relativistic corrections affect the redshift distortion. However, at redshifts and scales relevant to redshift distortion measurements, such effect is negligible.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Induction Linac Pulsers

The pulsers used in most of the induction linacs evolved from the very large body of work that was done in the U.S. and Great Britain during the development of the pulsed magnetron for radar. The radar modulators started at {approx}100 kW and reached >10 MW by 1945. A typical pulse length was 1 {mu}s at a repetition rate of 1,000 pps. A very comprehensive account of the modulator development is Pulse Generators by Lebacqz and Glasoe, one of the Radiation Laboratory Series. There are many permutations of possible modulators, two of the choices being tube type and line type. In earlier notes I wrote that technically the vacuum tube pulser met all of our induction linac needs, in the sense that a number of tubes, in series and parallel if required, could produce our pulses, regulate their voltage, be useable in feed-forward correctors, and provide a low source impedance. At a lower speed, an FET array is similar, and we have obtained and tested a large array capable of >10 MW switching. A modulator with an electronically controlled output only needs a capacitor for energy storage and in a switched mode can transfer the energy from the capacitor to the load at high efficiency. Driving a full size Astron induction core and a simulated resistive 'beam load' we achieved >50% efficiency. These electronically controlled output pulses can produce the pulses we desire but are not used because of their high cost. The second choice, the line type pulser, visually comprises a closing switch and a distributed or a lumped element transmission line. The typical switch cannot open or stop conducting after the desired pulse has been produced, and consequently all of the initially stored energy is dissipated. This approximately halves the efficiency, and the original cost estimating program LIACEP used this factor of two, even though our circuits are usually worse, and even though our inveterate optimists often omit it. The 'missing' energy is that which is reflected back into the line from mismatches, the energy left in the accelerator module's capacitance, the energy lost in the switch during switching and during the pulse, and the energy lost in the pulse line charging circuit. For example, a simple resistor-limited power supply dissipates as much energy as it delivers to the pulse forming line, giving a factor if two by itself, therefore efficiency requires a more complicated charging system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the HCN – HNC Energy Difference

The value for the HCN → HNC 0 K isomerization energy has been investigated by combining state-of-the-art electronic structure methods with the Active Thermochemical Tables (ATcT) approach. The directly computed energy difference between HCN and HNC at the HEAT-456QP level of theory is 5236 ± 50 cm–1. This is substantially lower (by ~470 cm–1 or ~1.3 kcal/mol) than the recently proposed high-level multireference configuration interaction value of 5705 ± 20 cm–1 of Barber et al. (Mon. Not. R. Astron. Soc.2014, 437, 1828–1835). The discrepancy was analyzed by the ATcT approach, using several distinct steps, which (a) independently corroborated the current single-reference HEAT-456QP result, (b) independently found that the recent multireference-based value is highly unlikely to be correct within its originally stated uncertainty, and (c) produced a recommended value of 5212 ± 30 cm–1 for the HCN → HNC isomerization energy at 0 K, based on all currently available knowledge. The ATcT standard enthalpies of formation at 0 and 298 K for HCN, HNC, and their cations and anions are also presented.

Active Thermochemical Tables↗

Nonlinear resonant absorption of fast magnetoacoustic waves in strongly anisotropic and dispersive plasmas

The nonlinear theory of driven magnetohydrodynamics (MHD) waves in strongly anisotropic and dispersive plasmas, developed for slow resonance by Clack and Ballai [Phys. Plasmas 15, 2310 (2008)] and Alfven resonance by Clack et al. [Astron. Astrophys. 494, 317 (2009)], is used to study the weakly nonlinear interaction of fast magnetoacoustic (FMA) waves in a one-dimensional planar plasma. The magnetic configuration consists of an inhomogeneous magnetic slab sandwiched between two regions of semi-infinite homogeneous magnetic plasmas. Laterally driven FMA waves penetrate the inhomogeneous slab interacting with the localized slow or Alfven dissipative layer and are partly reflected, dissipated, and transmitted by this region. The nonlinearity parameter defined by Clack and Ballai (2008) is assumed to be small and a regular perturbation method is used to obtain analytical solutions in the slow dissipative layer. The effect of dispersion in the slow dissipative layer is to further decrease the coefficient of energy absorption, compared to its standard weakly nonlinear counterpart, and the generation of higher harmonics in the outgoing wave in addition to the fundamental one. The absorption of external drivers at the Alfven resonance is described within the linear MHD with great accuracy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mean shear flows generated by nonlinear resonant Alfven waves

In the context of resonant absorption, nonlinearity has two different manifestations. The first is the reduction in amplitude of perturbations around the resonant point (wave energy absorption). The second is the generation of mean shear flows outside the dissipative layer surrounding the resonant point. Ruderman et al. [Phys. Plasmas 4, 75 (1997)] studied both these effects at the slow resonance in isotropic plasmas. Clack et al. [Astron. Astrophys. 494, 317 (2009)] investigated nonlinearity at the Alfven resonance; however, they did not include the generation of mean shear flow. In this present paper, we investigate the mean shear flow, analytically, and study its properties. We find that the flow generated is parallel to the magnetic surfaces and has a characteristic velocity proportional to {epsilon}{sup 1/2}, where {epsilon} is the dimensionless amplitude of perturbations far away from the resonance. This is, qualitatively, similar to the flow generated at the slow resonance. The jumps in the derivatives of the parallel and perpendicular components of mean shear flow across the dissipative layer are derived. We estimate the generated mean shear flow to be of the order of 10 km s{sup -1} in both the solar upper chromosphere and solar corona; however, this value strongly depends on the choice of boundary conditions. It is proposed that the generated mean shear flow can produce a Kelvin-Helmholtz instability at the dissipative layer which can create turbulent motions. This instability would be an additional effect, as a Kelvin-Helmholtz instability may already exist due to the velocity field of the resonant Alfven waves. This flow can also be superimposed onto existing large scale motions in the solar upper atmosphere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulation of current sheet formation in a quasiseparatrix layer using adaptive mesh refinement

The formation of a thin current sheet in a magnetic quasiseparatrix layer (QSL) is investigated by means of numerical simulation using a simplified ideal, low-{beta}, MHD model. The initial configuration and driving boundary conditions are relevant to phenomena observed in the solar corona and were studied earlier by Aulanier et al. [Astron. Astrophys. 444, 961 (2005)]. In extension to that work, we use the technique of adaptive mesh refinement (AMR) to significantly enhance the local spatial resolution of the current sheet during its formation, which enables us to follow the evolution into a later stage. Our simulations are in good agreement with the results of Aulanier et al. up to the calculated time in that work. In a later phase, we observe a basically unarrested collapse of the sheet to length scales that are more than one order of magnitude smaller than those reported earlier. The current density attains correspondingly larger maximum values within the sheet. During this thinning process, which is finally limited by lack of resolution even in the AMR studies, the current sheet moves upward, following a global expansion of the magnetic structure during the quasistatic evolution. The sheet is locally one-dimensional and the plasma flow in its vicinity, when transformed into a comoving frame, qualitatively resembles a stagnation point flow. In conclusion, our simulations support the idea that extremely high current densities are generated in the vicinities of QSLs as a response to external perturbations, with no sign of saturation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to 'Comment on 'Solitary waves and double layers in an ultra-relativistic degenerate dusty electron-positron-ion plasma' '[Phys. Plasmas 19, 064703 (2012)]

The investigation of the occurrence of nonlinear electrostatic waves (viz., solitary waves and double layers) in degenerate plasmas was the main concern of the article presented by Roy et al.[Phys. Plasmas 19, 033705 (2012)]. The equations of state used in the article were the limits explained by Chandrasekhar [Mon. Not. R. Astron. Soc. 170, 405 (1935)]. It was designated as 'misleading' by some authors, which is opposed in this reply with explanation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resonances in rotationally inelastic scattering of NH{sub 3} and ND{sub 3} with H{sub 2}

We present theoretical studies on the scattering resonances in rotationally inelastic collisions of NH{sub 3} and ND{sub 3} molecules with H{sub 2} molecules. We use the quantum close-coupling method to compute state-to-state integral and differential cross sections for the NH{sub 3}/ND{sub 3}–H{sub 2} system for collision energies between 5 and 70 cm{sup −1}, using a previously reported potential energy surface [Maret et al., Mon. Not. R. Astron. Soc. 399, 425 (2009)]. We identify the resonances as shape or Feshbach resonances. To analyze these, we use an adiabatic bender model, as well as examination at the scattering wave functions and lifetimes. The strength and width of the resonance peaks suggest that they could be observed in a crossed molecular beam experiment involving a Stark-decelerated NH{sub 3} beam.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The stability of stratified spatially periodic shear flows at low Péclet number

This work addresses the question of the stability of stratified, spatially periodic shear flows at low Péclet number but high Reynolds number. This little-studied limit is motivated by astrophysical systems, where the Prandtl number is often very small. Furthermore, it can be studied using a reduced set of “low-Péclet-number equations” proposed by Lignières [“The small-Péclet-number approximation in stellar radiative zones,” Astron. Astrophys. 348, 933–939 (1999)]. Through a linear stability analysis, we first determine the conditions for instability to infinitesimal perturbations. We formally extend Squire’s theorem to the low-Péclet-number equations, which shows that the first unstable mode is always two-dimensional. We then perform an energy stability analysis of the low-Péclet-number equations and prove that for a given value of the Reynolds number, above a critical strength of the stratification, any smooth periodic shear flow is stable to perturbations of arbitrary amplitude. In that parameter regime, the flow can only be laminar and turbulent mixing does not take place. Finding that the conditions for linear and energy stability are different, we thus identify a region in parameter space where finite-amplitude instabilities could exist. Using direct numerical simulations, we indeed find that the system is subject to such finite-amplitude instabilities. We determine numerically how far into the linearly stable region of parameter space turbulence can be sustained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-pressure chemistry of hydrocarbons relevant to planetary interiors and inertial confinement fusion

Diamond formation in polystyrene (C8H8)n, which is laser-compressed and heated to conditions around 150 GPa and 5000 K, has recently been demonstrated in the laboratory [Kraus et al., Nat. Astron. 1, 606–611 (2017)]. Here, we show an extended analysis and comparison to first-principles simulations of the acquired data and their implications for planetary physics and inertial confinement fusion. Moreover, we discuss the advanced diagnostic capabilities of adding high-quality small angle X-ray scattering and spectrally resolved X-ray scattering to the platform, which shows great prospects of precisely studying the kinetics of chemical reactions in dense plasma environments at pressures exceeding 100 GPa.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fill tube dynamics in inertial confinement fusion implosions with high density carbon ablators

Plasma jets, such as γ-ray burst jets, Herbig–Haro jets, μ-quasar jets, and active galactic nuclei jets, are found throughout the universe [S. Mendoza et al., Rev. Mex. Astron. Astrofis. 41, 453 (2005)]. Plasma jets are also present in indirect drive inertial confinement fusion experiments originating from the capsule's fill tube and occasionally from divots and voids in the capsules, particles on the exterior of the capsule, or from the tent holding the capsule in the target. This paper looks at two different gas-filled capsule implosions containing a plasma jet resulting from a capsule fill tube and fill channel, both of which utilized high density carbon ablators. Two models were developed, a drag and a snowplow model, which use the time-dependent motion of the injected mass through the hotspot to estimate the mass injected into the hotspot from the fill tube and channel, arriving at an average injected mass of ~84.5 ± 25.5 ng for the first experiment and 91 ± 20 ng for the second experiment. Furthermore, unlike previous methods to estimate fill tube injected mass, these techniques do not assume that the mixed mass is in thermal equilibrium with the hotspot or that the x-ray emission is only coming from within the hotspot itself. This paper also discusses the features seen in these experiments which include limb brightening in the shell for undoped ablators and flattening in the ablator from shadowing by the fill tube.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗