Evaluation of ASR in concrete using acoustic emission and deep learning
Not provided.
Nuclear Science & Technology↗
SEARCH · Engineering Papers
Results for “ASRS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Efficacy of SCMs to mitigate ASR in systems with higher alkali contents assessed by pore solution method
This study demonstrates the efficacy of supplementary cementitious materials (SCMs) to mitigate alkali-silica reaction (ASR) even when used in conjunction with cement of higher alkali contents (up to 1% Na{sub 2}O{sub eq}). The expansion of concrete prisms was studied immersed in simulated pore solution in order to address the limitations of conventional ASR testing methods, accelerated mortar bar test (AMBT) and concrete prism test (CPT). Expansion results demonstrate that 25% fly ash and 50% slag are both sufficient to mitigate ASR even with cements with alkali content up to 1% Na{sub 2}O{sub eq} and that the pore solution method is a viable alternative ASR testing method. Massive amounts of ASR products (~20 μm thickness) were observed in concretes without SCMs consistent with high degree of expansion and extensive cracking. Small amounts of ASR products (≤5 μm thickness) were also observed in concrete with SCMs despite absence of significant expansion.
36 MATERIALS SCIENCE↗
Microscopic assessment of ASR-affected concrete under confinement conditions
The Damage Rating Index (DRI), a semi-quantitative microscopic procedure, has been successfully used to describe alkali-silica reaction (ASR) damage development of concrete under “free expansion” conditions. Yet, the confinement impact on ASR-induced cracks' generation and propagation has not been fully investigated. This work aims to understand the influence of confinement on ASR development through the DRI. Eighteen concrete blocks incorporating a highly reactive coarse aggregate and distinct reinforcement configurations were manufactured, stored in conditions enabling ASR development, and monitored over time. Two expansion levels were selected for analysis (0.08% and 0.15%) and once reached, cores were extracted from three different directions (longitudinal, transverse and vertical) and the DRI conducted on those. Results demonstrate that ASR-induced expansion and deterioration change according to the direction and confinement configuration. Moreover, distinct crack features and orientations are generated in confined concrete, which attests that ASR displays different damage mechanisms under free and confinement conditions.
36 MATERIALS SCIENCE↗
Sorption and electrokinetic properties of ASR product and C-S-H: A comparative modelling study
Alkali-silica reaction (ASR) is one of the most important concrete durability issues worldwide. ASR products formed at high temperature have a structure similar to the natural mineral shlykovite. Reactive Grand Canonical Simulations were used to investigate sorption of K{sup +}, Cl{sup −} and Ca{sup 2+} on C-S-H and ASR products at different pH (10.0 to 13.0) and pore water chemistry. Divalent ions can overcompensate for the negative surface charge, in particular for C-S-H, which leads to a co-adsorption of negative species such as Cl{sup −}. At high K/Ca in solution, monovalent K{sup +} can desorb calcium from C-S-H and shlykovite surface. The calculated Ca/K partition coefficient shows a higher affinity of ASR product for K{sup +}, while C-S-H favours Ca{sup 2+}. The uptake of K{sup +} by ASR products lowers the alkali concentration in the solution and could thus slow down the rate of ASR.
36 MATERIALS SCIENCE↗
An in-situ 3D micro-XRD investigation of water uptake by alkali-silica-reaction (ASR) product
The ASR products in concrete have various chemical compositions. It is yet unclear whether and how these products develop micro-expansion upon moisture ingress. This paper presents a 3D in-situ observation of the crystallography and volume change of an ASR-product-filled vein under varying relative-humidity (R.H.). The vein was observed to contain two layered nano-crystalline phases with distinct basal spacings, and was distributed heterogeneously in space. When R.H. changed from 10% to >38%, the basal spacing increased from 7.43 Å to 8.89 Å for one phase, whereas it remained constant (~10.9 Å) for the other. This is the first time that an ASR product is observed in-situ to exhibit crystal structural expansion during wetting process. However, the product-filled vein exhibited no noticeable swelling when R.H. varied from 10% to 97%. Our findings provide the first direct evidence that the moisturization-induced crystal structural change of ASR product may not be a plausible explanation to the macroscale concrete expansion.
36 MATERIALS SCIENCE↗
New insights into the role of fly ash in mitigating alkali-silica reaction (ASR) in concrete
Alkali-silica reaction (ASR) mitigation mechanisms of fly ash in concrete are still being debated and remain an interesting research topic. This study provides new insights into the role of aluminum oxide (Al{sub 2}O{sub 3}) in fly ash particles on ASR mitigation. A comprehensive test program was conducted and included expansion measurements, dissolution model experiments of exposed and embedded borosilicate glass elements, analyses of pore and immersion solutions, quantification of Ca(OH){sub 2} content, and microstructural analyses. It was found that in addition to the traditionally accepted mitigation mechanisms such as alkali binding, diffusion control and reduction in available Ca(OH){sub 2}, dissolution control of reactive aggregates by aluminum discharged from fly ash particles also contributed to the ASR mitigation. Re-introducing alkalis to fly ash-incorporated concrete prisms which exhibited undeleterious expansion under a long-term ASR exposure triggered and significantly increased the subsequent expansion.
36 MATERIALS SCIENCE↗
Deterioration of concrete due to ASR: Experiments and multiscale modeling
The process of ASR (Alkali-Silica Reaction) induced expansion and damage in pavement concrete specimens is investigated using laboratory experiments and computational modeling. In the experimental program, the concrete specimens are subject to CS-CPT (climate simulation concrete prism test) to obtain ASR induced expansion with and without external supply of alkali. The dissolution rates of the granodiorite used in the concrete mix and the gel formation rates are determined under concrete-like conditions (pH 13.8, with/without Ca(OH){sub 2} and NaCl) at different temperatures. A micromechanics based computational model with aggregate-scale diffusion and reaction kinetics coupled to an Eigenstrain based micromechanics damage model is developed for the simulation of ASR induced expansion and damage. Data from the experimental program are used to calibrate and validate the computational model. Model predictions show that for the given concrete mixture, ASR induced expansion in the specimen exposed to water is predominantly governed by microcracking in the aggregate, while the expansion in the specimen subjected to external alkali supply is governed by microcracking in both the aggregates and the cement paste.
36 MATERIALS SCIENCE↗
Machine Learning for Processing Ultrasonic Data from Long-Term Monitoring of Concrete with Alkali-Silica Reaction (ASR)
The alkali–silica reaction (ASR) is a phenomenon that leads to material degradation in concrete, resulting in the formation of microcracks and cracks. This deterioration causes a loss of mechanical properties, concrete damage, and even corrosion. To address this issue, ultrasonic nondestructive evaluation can be employed as a technique for long-term monitoring of ASR development and condition assessment of concrete subjected to ASR. However, traditional approaches typically utilize only a few wave parameters, such as wave velocity or amplitude, to characterize ASR-induced concrete damage while disregarding the majority of information present in the ultrasonic signals.
36 MATERIALS SCIENCE↗
Final DOE-ASR Report for the Project “Using LASSO to bridge the gap between model and observations and to learn about atmospheric convection”
Atmospheric convection spans a wide range of spatial and temporal scales and involves complex interactions with the surrounding dynamic and thermodynamic environment, particularly over tropical continental regions. These processes remain a major source of uncertainty in weather and climate models, including persistent biases in the diurnal cycle of convective precipitation that directly affect estimates of climate sensitivity. Addressing these challenges requires the combined use of high-resolution observations and cloud-resolving modeling frameworks. In this context, the DOE Atmospheric Radiation Measurement (ARM) program’s Large-Eddy Simulation ARM Symbiotic Simulation and Observation (LASSO) activity provides a powerful platform that pairs comprehensive observations with numerical simulations to enable process-level understanding of atmospheric convection. Within this context, this Research and Development Partnership Pilot (RDPP) project was designed to initiate and expand DOE ARM/ASR research capacity at minority-serving institutions, while advancing scientific understanding of convective processes over the Amazon rainforest. Consistent with the RDPP mission, the project emphasized partnership development, training, and workforce capacity building alongside exploratory research activities. On the scientific side, the project produced two peer-reviewed journal articles, and one manuscript currently under review (see list in section 3.1). Together, these studies combine long-term ARM observations and cloud-resolving and convection-permitting modeling to investigate the environmental controls on the shallow-to-deep convective transition during the Amazon wet season. The results demonstrate the central role of early-day moisture preconditioning and large-scale dynamical forcing in regulating isolated deep convection, provide mechanistic insight into convective evolution, and establish physically informed modeling frameworks for future sensitivity experiments. These scientific outcomes are described in sections 2.1 to 2.3 and were disseminated in 8 conference presentations (see section 3.2) and 5 invited talks (see section 3.3), reflecting broad engagement with our community. Equally important, the project achieved its RDPP capacity-building objectives (see section 2.4). A sustained research partnership was established among the University of Maryland, Baltimore County (UMBC), Morgan State University (MSU), and Howard University (HU), and extended to include collaboration with Pacific Northwest National Laboratory (PNNL). The project organized multiple multi-day training events focused on ARM data, LASSO simulations, and quantitative analysis methods, directly engaging students, postdoctoral researchers, and faculty across institutions. These activities broadened participation in ASR research and led to independent adoption of LASSO workflows by students beyond the immediate project team. Finally, the project successfully positioned the participating institutions to pursue future DOE research. Preliminary scientific results, coupled with strengthened partnerships and technical capacity, enabled the submission of follow-on proposals to DOE ASR funding opportunities. In this way, the project fulfilled the RDPP goal of seeding durable research capacity and laying the foundation for larger-scale, sustained engagement with DOE ARM and ASR programs.
54 ENVIRONMENTAL SCIENCES↗
Microscopic characterization of alkali-silica reaction (ASR) affected recycled concrete mixtures induced by reactive coarse and fine aggregates
Alkali-silica reaction (ASR) is one of the most detrimental distress mechanisms leading to early deterioration of concrete infrastructure, creating large amounts of construction and demolition waste which however can be transformed into recycled concrete aggregates (RCA). Yet, as ASR is an ongoing distress mechanism, its potential of reoccurrence in RCA could cause adverse effects. Investigation of the crack propagation of RCA concrete revealed that the distress features vary widely thus, indicating different distress mechanisms in all RCA concrete. Concrete made of slightly damaged RCA shows the lease number of cracks yet, wider cracks at high expansion levels. Additionally, the distress in slightly damaged RCA concrete made of reactive coarse aggregate and RCA concrete made of reactive sand, regardless of original damage extent, is governed by cracks propagating through the residual cement paste whereas cracks propagate through the new cement paste in severely damaged RCA made of reactive coarse aggregate.
36 MATERIALS SCIENCE↗
Grape ASR Regulates Glucose Transport, Metabolism and Signaling
To decipher the mediator role of the grape Abscisic acid, Stress, Ripening (ASR) protein, VvMSA, in the pathways of glucose signaling through the regulation of its target, the promoter of hexose transporter VvHT1, we overexpressed and repressed VvMSA in embryogenic and non-embryogenic grapevine cells. The embryogenic cells with organized cell proliferation were chosen as an appropriate model for high sensitivity to the glucose signal, due to their very low intracellular glucose content and low glycolysis flux. In contrast, the non-embryogenic cells displaying anarchic cell proliferation, supported by high glycolysis flux and a partial switch to fermentation, appeared particularly sensitive to inhibitors of glucose metabolism. By using different glucose analogs to discriminate between distinct pathways of glucose signal transduction, we revealed VvMSA positioning as a transcriptional regulator of the glucose transporter gene VvHT1 in glycolysis-dependent glucose signaling. The effects of both the overexpression and repression of VvMSA on glucose transport and metabolism via glycolysis were analyzed, and the results demonstrated its role as a mediator in the interplay of glucose metabolism, transport and signaling. The overexpression of VvMSA in the Arabidopsis mutant abi8 provided evidence for its partial functional complementation by improving glucose absorption activity.
59 BASIC BIOLOGICAL SCIENCES↗
Nonlinear Impact-Echo Test for Quantitative Evaluation of ASR Damage in Concrete
Nonlinear acoustic methods demonstrate high sensitivity for concrete damage evaluation. Among these methods, nonlinear resonance acoustic methods have been widely used in laboratory tests on small scale test samples. In this study, a nonlinear impact-echo (IE) method for concrete damage evaluation was introduced, in which the IE frequency shift was measured at different impact force levels. The nonlinear IE test and the nonlinear impact resonance acoustic spectroscopy (NIRAS) test share similarities in the experimental setup and analysis method. However, the nonlinear IE test excites a local thickness resonance mode of a member instead of the global resonance vibration. Therefore, the analyzed mode is unaffected by member boundary conditions and is applicable to large concrete structural members. To identify the fundamental IE frequencies, multiple impacts were applied along the members. Once the fundamental IE frequencies were determined, the effectiveness of the nonlinear IE method was evaluated by testing seven concrete beam specimens with varying levels of alkali-silica reaction (ASR) damage. In conclusion, the nonlinear IE test demonstrates high sensitivity to concrete damage and allows for quantitative assessment of the damage state of concrete without a baseline measurement.
36 MATERIALS SCIENCE↗
A Lagrangian Study of the Transition from Shallow to Deep Convection Using ASR Observations and Les Simulations (Final Report)
With the support from this grant, we have made the following accomplishments. We have found that a formula for fractional entrainment rate, a key aspect for parameterization moist convection, that works for both shallow and deep convection, which provide a promising direction for unified treatment of entrainment for both shallow and deep convection. We also examined the formulation of vertical velocity and showed that the effect of non-hydrostatic pressure and entrainment on vertical velocity are not constants, as assumed in past studies, but can be computed using a simple model for the cloudy updrafts. These results also apply to both deep and shallow convection, which opens the door for a more physically based parameterization of the updraft vertical velocity. We have also conducted extensive analysis of the RACORO aircraft data and have published the results in Wei et al. (2020). We have made extensive effort scrutinizing the data in detail and examining the various hypotheses with the aid of the LES simulations. This was the first application of the modified Paluch diagram on modern aircraft data and the first comprehensive analysis of mixing in clouds using real data (instead of only LES output) in a very long time. These analyses enhanced the science return of the ASR aircraft measurements. This grant also supported a study of the collisions among cold pools and an effort to build parameterizations of moist convection using tools developed in control theory.
42 ENGINEERING↗
Department of Energy’s Atmospheric System Research (ASR) Program’s Workshop on the Future of Atmospheric Large Eddy Simulation (LES) (Workshop Report)
Large-eddy simulation (LES) is used as a tool to understand physical processes such as turbulence, aerosols, clouds, precipitation, radiation, the interactions among all these, and their interactions with the underlying surface. Over the next 10 years, LES will drive fundamental progress in open scientific questions in these areas as LES is increasingly used to gain understanding of complex interacting physical processes involving atmospheric turbulence. This growth will be driven both by scientific demand and the expansion of computational resources needed to conduct LES, and the form that the growth takes will largely be determined by how computational resources are leveraged for scientific gain. In particular, we suggest that computational resources are likely to be leveraged in two separate but not necessarily distinct ways. On one hand, growth in computational resources will allow LES to be made more routine, that is, performed more frequently, while on the other hand, the computational expense (measured in total floating point operations) afforded to individual LES will expand dramatically, allowing simulations to increase in both domain size and resolution as well as physical detail. Current U.S. Department of Energy (DOE) projects such as LES ARM Symbiotic Simulation and Observation Activity (LASSO) are leading the way in conducting routine LES, building large, public databases that are accessible for data science, sensitivity studies, and training for machine learning. LES will also become more routine as it becomes more accessible for individual researchers to address their scientific questions of interest. Scientific questions addressed by LES over the next 10 years are likely to include cloud organization and aggregation; aerosol cloud interactions and atmospheric chemistry (including geo-engineering); urban-scale LES; atmospheric extreme events, ranging from small-scale severe weather to wildfires; and ocean-wave-atmosphere interactions. Further LES-related research will likely grow significantly in areas related to societal impact studies of air quality and extreme weather events, applications to renewable energy forecasting and resource assessment, and aid in decision-making processes.
54 ENVIRONMENTAL SCIENCES↗
A hybrid FE-based predictive framework for ASR-affected structures coupled with accelerated experiments
Not Available
Hariri-Ardebili, Mohammad Amin↗
A novel wheat ASR gene, TaASR2D, enhances drought tolerance in Brachypodium distachyon
Not Available
Yoon, Jin Seok↗
Temporal Evaluation of ASR Cracking in Concrete Specimens Using Acoustic Emission
Not provided.
Construction & Building Technology↗
Department of Energy’s Atmospheric System Research (ASR) Program’s Workshop on the Future of Atmospheric Large Eddy Simulation (LES): Workshop Report
Large-eddy simulation (LES) is used as a tool to understand physical processes such as turbulence, aerosols, clouds, precipitation, radiation, the interactions among all these, and their interactions with the underlying surface. Over the next 10 years, LES will drive fundamental progress in open scientific questions in these areas as LES is increasingly used to gain understanding of complex interacting physical processes involving atmospheric turbulence. This growth will be driven both by scientific demand and the expansion of computational resources needed to conduct LES, and the form that the growth takes will largely be determined by how computational resources are leveraged for scientific gain. In particular, we suggest that computational resources are likely to be leveraged in two separate but not necessarily distinct ways. On one hand, growth in computational resources will allow LES to be made more routine, that is, performed more frequently, while on the other hand, the computational expense (measured in total floating point operations) afforded to individual LES will expand dramatically, allowing simulations to increase in both domain size and resolution as well as physical detail. Current U.S. Department of Energy (DOE) projects such as LES ARM Symbiotic Simulation and Observation Activity (LASSO) are leading the way in conducting routine LES, building large, public databases that are accessible for data science, sensitivity studies, and training for machine learning. LES will also become more routine as it becomes more accessible for individual researchers to address their scientific questions of interest. Scientific questions addressed by LES over the next 10 years are likely to include cloud organization and aggregation; aerosol cloud interactions and atmospheric chemistry (including geo-engineering); urban-scale LES; atmospheric extreme events, ranging from small-scale severe weather to wildfires; and ocean-wave-atmosphere interactions. Further LES-related research will likely grow significantly in areas related to societal impact studies of air quality and extreme weather events, applications to renewable energy forecasting and resource assessment, and aid in decision-making processes. The growth in the use of LES in atmospheric science research will drive the need for better physical process representations (e.g., cloud aerosol microphysics, radiation, and atmospheric chemistry) at the scales resolved by LES. To date, many of the process representations used by LES have been taken directly from coarser-resolution models. Promising methods for LES process representations include superdroplet and quadrature methods for microphysics, 3D approaches for radiation, and better representation of chemistry and aerosol processes. At LES resolution, land-atmosphere interactions for complex terrains, land cover/types, biogeochemistry, and plant canopy models are needed as an improvement beyond traditional and widely used Monin-Obuhkov similarity theory.
54 ENVIRONMENTAL SCIENCES↗