Nuclear Data Sheets for A = 49
The 1995 Nuclear Data Sheets evaluation for A = 49 (1995Bu23) has been revised using experimental decay and reaction data received by July 14, 2008.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The 1995 Nuclear Data Sheets evaluation for A = 49 (1995Bu23) has been revised using experimental decay and reaction data received by July 14, 2008.
Films of poly(tetrafluoroethylene) (PTFE) and of a tetrafluoroethylene-perfluoroalkyl vinyl ether (approximately 49:1) copolymer (PFA) were exposed to a radio-frequency argon plasma and then examined by X-ray photoelectron spectroscopy (XPS). The use of fluoropolymer films nearly free of surface hydrocarbon contamination as well as the use of a monochromatized X-ray source for XPS removed two factors contributing to conflicting reports on the effect of exposure time on the fluorine-to-carbon (F/C) and oxygen-to-carbon (O/C) ratios for several Ar-plasma-treated fluoropolymers. Contrary to literature indications, a common pattern was found for PTFE and PFA: a moderate decrease in F/C ratio (from 1.99 to 1.40, and from 1.97 to 1.57, respectively), together with a moderate increase in O/C ratio (from negligible to about 0.10, and from 0.012 to about O.10, respectively) at very short exposures, after which the F/C ratios remained essentially constant on prolonged exposures, while the O/C ratios for PTFE and PFA leveled off at 0.11 and 0.15, respectively. The XPS C(sub 1s), spectra for these polymers exposed to the Ar plasma for 20 min were similar and presented, besides a prominent peak at 292.0 eV (CF2,) and a minor peak at 294.0 or 294.1 eV (CF3), a composite band of four curve-resolved peaks (approximately 285-290 eV) representing various CH, CC, CO, CN, and CF functionalities.
Purpose: To evaluate and compare the effect of argon plasma coagulation (APC) and topical formalin for intractable rectal bleeding and anorectal dysfunction associated with chronic radiation proctitis. Methods and Materials: Thirty men (median age, 72 years; range, 49-87 years) with intractable rectal bleeding (defined as ≥1× per week and/or requiring blood transfusions) after radiation therapy for prostate carcinoma were randomized to treatment with APC (n=17) or topical formalin (n=13). Each patient underwent evaluations of (1) anorectal symptoms (validated questionnaires, including modified Late Effects in Normal Tissues–Subjective, Objective, Management, and Analytic and visual analogue scales for rectal bleeding); (2) anorectal motor and sensory function (manometry and graded rectal balloon distension); and (3) anal sphincteric morphology (endoanal ultrasound) before and after the treatment endpoint (defined as reduction in rectal bleeding to 1× per month or better, reduction in visual analogue scales to ≤25 mm, and no longer needing blood transfusions). Results: The treatment endpoint was achieved in 94% of the APC group and 100% of the topical formalin group after a median (range) of 2 (1-5) sessions of either treatment. After a follow-up duration of 111 (29-170) months, only 1 patient in each group needed further treatment. Reductions in rectal compliance and volumes of sensory perception occurred after APC, but no effect on anorectal symptoms other than rectal bleeding was observed. There were no differences between APC and topical formalin for anorectal symptoms and function, nor for anal sphincteric morphology. Conclusions: Argon plasma coagulation and topical formalin had comparable efficacy in the durable control of rectal bleeding associated with chronic radiation proctitis but had no beneficial effect on anorectal dysfunction.
By means of low-temperature scanning tunneling microscopy, we report on the electronic structures of the BiO and SrO planes of the Bi 2 Sr 2 CuO 6+δ (Bi-2201) superconductor prepared by argon-ion bombardment and annealing. Depending on post annealing conditions, the BiO planes exhibit either a pseudogap (PG) with sharp coherence peaks and an anomalously large gap magnitude of 49 meV or van Hove singularity (vHS) near the Fermi level, while the SrO is always characteristic of a PG-like feature. This contrasts with the Bi 2 Sr 2 CaCu 2 O 8+δ (Bi-2212) superconductor where vHS occurs solely on the SrO plane. We disclose the interstitial oxygen dopants (δ in the formulas) as a primary cause for the occurrence of vHS, which are located dominantly around the BiO and SrO planes, respectively, in Bi-2201 and Bi-2212. This is supported by the contrasting structural buckling amplitude of the BiO and SrO planes in the two superconductors. Furthermore, our findings provide solid evidence for the irrelevance of PG to the superconductivity in the two superconductors, as well as insights into why Bi-2212 can achieve a higher superconducting transition temperature than Bi-2201, and by implication, the mechanism of cuprate superconductivity.
Experimental cross sections and cross-section ratios reported in the literature for direct double ionization of the outer shells of helium, neon, and argon atoms resulting from bare ions ranging from protons to uranium and for antiprotons are analyzed in terms of a first- and second-order interference model originally proposed by McGuire [J. H. McGuire, Phys. Rev. Lett. 49, 1153 (1982)]. Empirical formulas for the various contributions to double ionization plus information about the phase difference between the first- and second-order mechanisms are extracted from the data. Projectile and target scalings are also extracted. Total cross sections and their ratios determined using these formulas and scalings are shown to be in very good agreement with experimental data for lower-Z projectiles and impact velocities larger than 1 a.u. For very-high-Z projectiles, the amount of double ionization is overestimated, probably due to saturation of probabilities that is not accounted for in scaling formulas.
Single-neutron-transfer measurements using (p,d) reactions have been performed at 33 MeV per nucleon with proton-rich {sup 34}Ar and neutron-rich {sup 46}Ar beams in inverse kinematics. The extracted spectroscopic factors are compared to the large-basis shell-model calculations. Relatively weak quenching of the spectroscopic factors is observed between {sup 34}Ar and {sup 46}Ar. The experimental results suggest that neutron correlations have a weak dependence on the asymmetry of the nucleus over this isotopic region. The present results are consistent with the systematics established from extensive studies of spectroscopic factors and dispersive optical-model analyses of {sup 40-49}Ca isotopes. They are, however, inconsistent with the trends obtained in knockout-reaction measurements.
High power impulse magnetron sputtering of zirconium was investigated at the average target power density of up to 2.22 kW cm{sup -2} in a pulse. The depositions were performed using a strongly unbalanced magnetron with a planar zirconium target of 100 mm diameter at the argon pressure of 1 Pa. The repetition frequency was 500 Hz at duty cycles ranging from 4% to 10%. Time-averaged mass spectroscopy was carried out at the substrate positions of 100 and 200 mm from the target. The increase in the average target power density from 0.97 kW cm{sup -2} to 2.22 kW cm{sup -2} in shortened voltage pulses (from 200 to 80 {mu}s) at an average target power density of 100 W cm{sup -2} in a period led to high fractions (21%-32%) of doubly charged zirconium ions in total ion fluxes onto the substrate located 100 mm from the target. However, the respective fractions of singly charged zirconium ions decreased from 23% to 3%. It was observed that ion energy distributions were extended to high energies (up to 100 eV relative to the ground potential) under these conditions. The increased target power densities during the shortened voltage pulses resulted in a reduced deposition rate of films from 590 to 440 nm/min and in a weakly decreasing ionized fraction (from 55% to 49%) of the sputtered zirconium atoms in the flux onto the substrate. The doubly charged zirconium ions became strongly predominant (up to 63%) in the total ion flux onto the substrate at the distance of 200 mm from the target. Model calculations were carried out to explain the complicated deposition processes.
Novel quaternary Si-B-C-N materials are becoming increasingly attractive because of their possible high-temperature and harsh-environment applications. In the present work, amorphous Si-B-C-N films were deposited on Si and SiC substrates by reactive dc magnetron cosputtering using a single C-Si-B or B{sub 4}C-Si target in nitrogen-argon gas mixtures. A fixed 75% Si fraction in the target erosion areas, a rf induced negative substrate bias voltage of -100 V, a substrate temperature of 350 deg. C, and a total pressure of 0.5 Pa were used in the depositions. The corresponding discharge and deposition characteristics (such as the ion-to-film-forming particle flux ratio, ion energy per deposited atom, and deposition rate) are presented to understand complex relationships between process parameters and film characteristics. Films deposited under optimized conditions (B{sub 4}C-Si target, 50% N{sub 2}+50% Ar gas mixture), possessing a composition (in at. %) Si{sub 32-34}B{sub 9-10}C{sub 2-4}N{sub 49-51} with a low (less than 5 at. %) total content of hydrogen and oxygen, exhibited extremely high oxidation resistance in air at elevated temperatures (even above 1500 deg. C). Formation of protective surface layers (mainly composed of Si and O) was proved by high-resolution transmission electron microscopy, Rutherford backscattering spectrometry, and x-ray diffraction measurements after oxidization. Amorphous structure of the Si-B-C-N films was maintained under the oxidized surface layers after annealing in air up to 1700 deg. C (a limit imposed by thermogravimetric analysis in oxidative atmospheres)
Lively Grove #1 (LG1 API number 1218924947) well was drilled to a depth of 5,758 feet, from the Glen Dean Limestone to the top of the Precambrian unit. In total, 49 thin sections were taken from Rotary Sidewall Core (RSWC), and one thin section was taken from Whole Core (2,918 feet, New Albany Shale) from 1,700 to 5,872 feet for this report. This report details specifically thin section point-counting analysis that includes mineralogical and pore space analysis, including grain size analysis annotated thin section photomicrographs, scanning electron microscopy (SEM) with Energy Dispersive x-ray Spectroscopy (EDS), X-ray Diffraction (XRD), statistics of grain size analysis on St. Peter Sandstone thin sections, and Argon-Argon (Ar-Ar) dating on Precambrian samples from LG1. Characterized units include the Salem Limestone, New Albany Shale, Trenton Group, Joachim Dolomite, St. Peter Sandstone, Everton Formation, Eminence Formation, Davis Member, Eau Claire Formation, and Precambrian Basement.
Phase relations in the ternary system Ce-Pd-Si have been established for the isothermal section at 800 deg. C based on X-ray powder diffraction and EMPA techniques on about 130 alloys, which were prepared by arc-melting under argon or powder reaction sintering. Eighteen ternary compounds have been observed to participate in the phase equilibria at 800 deg. C. Atom order was determined by direct methods from X-ray single-crystal counter data for the crystal structures of tau{sub 8}-Ce{sub 3}Pd{sub 4}Si{sub 4} (U{sub 3}Ni{sub 4}Si{sub 4}-type, Immm; a=0.41618(1), b=0.42640(1), c=2.45744(7) nm), tau{sub 16}-Ce{sub 2}Pd{sub 14}Si (own structure type, P4/nmm; a=0.88832(2), c=0.69600(2) nm) and also for tau{sub 18}-CePd{sub 1-x}Si{sub x} (x=0.07; FeB-type, Pnma; a=0.74422(5), b=0.45548(3), c=0.58569(4) nm). Rietveld refinements established the atom arrangement in the structures of tau{sub 5}-Ce{sub 3}PdSi{sub 3} (Ba{sub 3}Al{sub 2}Ge{sub 2}-type, Immm; a=0.41207(1), b=0.43026(1), c=1.84069(4) nm) and tau{sub 13}-Ce{sub 3-x}Pd{sub 20+x}Si{sub 6} (0<=x<=1, Co{sub 20}Al{sub 3}B{sub 6}-type, Fm3-barm; a=1.21527(2) nm). The ternary compound Ce{sub 2}Pd{sub 3}Si{sub 3} (structure-type Ce{sub 2}Rh{sub 1.35}Ge{sub 4.65}, Pmmn; a=0.42040(1), b=0.42247(1), c=1.72444(3) nm) was detected as a high-temperature compound, however, does not participate in the equilibria at 800 deg. C. Phase equilibria in Ce-Pd-Si are characterized by the absence of cerium solubility in palladium silicides. Mutual solubility among cerium silicides and cerium-palladium compounds are significant whereby random substitution of the almost equally sized atom species palladium and silicon is reflected in extended homogeneous regions at constant Ce-content such as for tau{sub 2}-Ce(Pd{sub x}Si{sub 1-x}){sub 2} (AlB{sub 2}-derivative type), tau{sub 6}-Ce(Pd{sub x}Si{sub 1-x}){sub 2} (ThSi{sub 2}-type) and tau{sub 7}-CePd{sub 2-x}Si{sub 2+x}. The crystal structures of compounds tau{sub 4}-Ce{sub a}pprox{sub 8}Pd{sub a}pprox{sub 46}Si{sub a}pprox{sub 46}, tau{sub 12}-Ce{sub a}pprox{sub 29}Pd{sub a}pprox{sub 49}Si{sub a}pprox{sub 22}, tau{sub 15}-Ce{sub a}pprox{sub 22}Pd{sub a}pprox{sub 67}Si{sub a}pprox{sub 11}, tau{sub 17}-Ce{sub a}pprox{sub 5}Pd{sub a}pprox{sub 77}Si{sub a}pprox{sub 18} and tau{sub 18}-CePd{sub 1-x}Si{sub x} (xapprox0.1) are still unknown. - Abstract: Phase relations in the ternary system Ce-Pd-Si have been established for the isothermal section at 800 deg. C based on X-ray powder diffraction, metallography, SEM and EMPA techniques on about 130 alloys. 18 ternary compounds were observed. Display Omitted
In order to actively control power load on the divertor target plates and study the effect of radiative divertor on plasma parameters in divertor plasmas and heat fluxes to the targets, dedicated experiments with Ar impurity seeding have been performed on experimental advanced superconducting tokamak in typical L-mode discharge with single null divertor configuration, ohmic heating power of 0.5 MW, and lower hybrid wave heating power of 1.0 MW. Ar is puffed into the divertor plasma at the outer target plate near the separatrix strike point with the puffing rate 1.26 Multiplication-Sign 10{sup 20} s{sup -1}. The radiative divertor is formed during the Ar puffing. The SOL/divertor plasma in the L-mode discharge with radiative divertor has been modelled by using SOLPS5.2 code package [V. Rozhansky et al., Nucl. Fusion 49, 025007 (2009)]. The modelling shows the cooling of the divertor plasma due to Ar seeding and is compared with the experimental measurement. The changes of peak electron temperature and heat fluxes at the targets with the shot time from the modelling results are similar to the experimental measurement before and during the Ar impurity seeding, but there is a major difference in time scales when Ar affects the plasma in between experiment and modelling.