Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “APATITES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Apatite-Melt Partitioning at 1 Bar: An Assessment of Apatite-Melt Exchange Equilibria Resulting from Non-Ideal Mixing of F and Cl in Apatite

The mineral apatite [Ca5(PO4)3(F,Cl,OH)] is present in a wide range of planetary materials. Due to the presence of volatiles within its crystal structure (X-site), many recent studies have attempted to use apatite to constrain the volatile contents of planetary magmas and mantle sources. In order to use the volatile contents of apatite to precisely determine the abundances of volatiles in coexisting silicate melt or fluids, thermodynamic models for the apatite solid solution and for the apatite components in multi-component silicate melts and fluids are required. Although some thermodynamic models for apatite have been developed, they are incomplete. Furthermore, no mixing model is available for all of the apatite components in silicate melts or fluids, especially for F and Cl components. Several experimental studies have investigated the apatite-melt and apatite-fluid partitioning behavior of F, Cl, and OH in terrestrial and planetary systems, which have determined that apatite-melt partitioning of volatiles are best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, McCubbin et al. recently reported that the exchange coefficients may vary in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite. In particular, solution calorimetry data of apatite compositions along the F-Cl join exhibit substantial excess enthalpies of mixing. In the present study, we conducted apatite-melt partitioning experiments in evacuated, sealed silica-glass tubes at approximately 1 bar and 950-1050 degrees Centigrade on a synthetic Martian basalt composition equivalent to the basaltic shergottite Queen Alexandria Range (QUE) 94201. These experiments were conducted dry, at low pressure, to assess the effects of temperature and apatite composition on the partitioning behavior of F and Cl between apatite and basaltic melt along the F-Cl apatite binary join, where there is non-ideal mixing of F and Cl in apatite.

McCubbin, F. M.↗
DOE OSTI2014

Hanford Apatite Treatability Test Report Errata: Apatite Mass Loading Calculation

The objective of this errata report is to document an error in the apatite loading (i.e., treatment capacity) estimate reported in previous apatite treatability test reports and provide additional calculation details for estimating apatite loading and barrier longevity. The apatite treatability test final report (PNNL-19572; Vermeul et al. 2010) documents the results of the first field-scale evaluation of the injectable apatite PRB technology. The apatite loading value in units of milligram-apatite per gram-sediment is incorrect in this and some other previous reports. The apatite loading in units of milligram phosphate per gram-sediment, however, is correct, and this is the unit used for comparison to field core sample measurements.

apatite↗
NASA NTRS2017

Apatite-Melt Partitioning of Volatiles in Basaltic Systems: Implications for Determining Volatile Abundances in Planetary Bodies from Apatite

Apatite [Ca5(PO4)3(F,Cl,OH)] is present in a wide range of planetary materials, and due to the presence of volatiles within its crystal structure (X-site), many recent studies have attempted to use apatite to constrain the volatile contents of planetary magmas and mantle sources [i.e., 1]. Experimental studies have investigated the apatite-melt partitioning behavior of F, Cl, and OH in basaltic systems [e.g., 2- 3], reporting that apatite-melt partitioning of volatiles is best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, exchange coefficients may vary as a function of temperature, pressure, melt composition, and/or oxygen fugacity. Furthermore, exchange coefficients may vary in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite [3]. In these regions of ternary space, we anticipate that crystal chemistry could influence partitioning behavior. Consequently, we conducted experiments to investigate the effect of apatite crystal chemistry on apatite-melt partitioning of F, Cl, and OH.

McCubbin, F. M.↗
NASA NTRSDate not supplied

Volatile Abundances of Apatite in CK and R Chondrites: Implications for Apatite Volatile Records in Oxidized and Thermally Altered Chondrite Parent Bodies

The mineral apatite [Ca5(PO4)3(F,Cl,OH)] is one of the primary mineralogical reservoirs for phosphorus on Earth, and it is a common phosphate mineral within a broad range of extraterrestrial samples. Naturally occurring apatite hosts F, Cl, and OH as essential structural constituents, and all three make up the apatite endmembers fluorapatite, chlorapatite, and hydroxylapatite, respectively. The presence of apatite in chondrite parent bodies indicates that apatite may hold a record of volatiles and their associated processes during the nascent stages of planetesimal formation and evolution.

F. M. McCubbin↗
DOE OSTI2016

The function of Sn(II)-apatite as a Tc immobilizing agent

Technetium-99 is a radioactive contaminant of high concern at many nuclear waste storage sites. At the U.S. Department of Energy Hanford Site, 99Tc is a component of low-activity waste (LAW) fractions of the nuclear tank waste, which are highly caustic, high ionic strength and have high concentrations of chromate. Removal of 99Tc from LAW streams would greatly benefit the site remediation process. In this study, we investigated the removal of 99Tc(VII), as pertechnetate, from deionized water (DIW) and a LAW simulant using two solid sorbents, tin (II) apatite (Sn-A) and SnCl2 through batch sorption testing and solid phase characterization. Sn-A showed higher levels of removal of Tc from both DIW and LAW simulant compared with the SnCl2. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/XEDS) and X-ray adsorption spectroscopy (XAS) of Sn-A following batch experiments in DIW showed that TcO4- is reduced to Tc(IV) on the Sn-A surface with no incorporation into the lattice structure of Sn-A. The performance of Sn-A in the LAW simulant was lowered due to a combined effect of the high alkalinity, which lead to an increased dissolution of Sn from the Sn-A, and a preference for the reduction of Cr(VI) over Tc(VII).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2024

Variations in Apatite F, Cl, and OH Abundances in Primitive Achondrites: Evidence of Fractional Melting?

The apatite group minerals [Ca 5 (PO 4 ) 3 (F,Cl,OH)] are some of the primary mineralogical reservoirs for phosphorus on Earth and a common phosphate mineral within a broad range of extraterrestrial samples. Naturally occurring apatite hosts F, Cl, and OH as essential structural constituents, and all three make up the apatite endmembers fluorapatite, chlorapatite, and hydroxylapatite, respectively. Although apatite is one of the most common phosphate minerals in meteorites and rocks from Earth, it typically occurs at minor to trace abundances. Apatite has been widely used as a mineralogical tool to probe the interiors of both differentiated and undifferentiated parent bodies for information about volatiles; however, little work has been done on apatite F, Cl, and OH abundances of apatite from primitive achondrite meteorites. There are broad differences between apatite X -site chemistry in chondrite parent bodies (typically F-poor) compared to apatite from basaltic rocks from many achondrite parent bodies (Cl-poor, apart from Mars). These differences could indicate that planetary differentiation processes, namely melting, play an important role in the evolution of apatite X -site chemistry. In fact, some ordinary chondrite meteorites that exhibit evidence of minor impact melting have apatite with X -site compositions that are much more F-rich than typical chondrite apatite. McCubbin et al., hypothesized that the F-rich compositions of the apatite in ordinary chondrites affected by impact melting could be the result of apatite partially melting, driving the residual apatite to more F-rich compositions; however, they also indicated that degassing of the more volatile Cl and H may also contribute to the F-enrichment. To further test the partial melting hypothesis, we investigate the F, Cl, and OH (by difference) abundances of apatite from primitive achondrite parent bodies given that they are thought to come from partially differentiated parent bodies that represent residues after partial melting. Consequently, their apatites could provide valuable insights into the effects of melting on apatite X -site chemistry. In this study, we report F and Cl abundances of apatite from a broad array of primitive achondrite meteorites, and we develop a model for apatite fractional melting using known apatite-melt partitioning relationships. Together, we use these results to further elucidate the role of melting on apatite X -site compositions.

F M McCubbin↗
NASA NTRS2017

Partitioning of F and Cl Between Apatite and a Synthetic Shergottite Liquid (QUE 94201) at 4 Gpa from 1300 TO 1500 C

Apatite [Ca5(PO4)3(F,Cl,OH)] is present in a wide range of planetary materials. Due to the presence of volatiles within its crystal structure (Xsite), many recent studies have attempted to use apatite to constrain the volatile contents of planetary magmas and mantle sources. In order to use the volatile contents of apatite to accurately determine the abundances of volatiles in coexisting silicate melt or fluids, thermodynamic models for the apatite solid solution and for the apatite components in multicomponent silicate melts and fluids are required. Although some thermodynamic models for apatite have been developed, they are incomplete. Furthermore, no mixing model is available for all of the apatite components in silicate melts or fluids, especially for F and Cl components. Several experimental studies have investigated the apatite-melt and apatite-fluid partitioning behavior of F, Cl, and OH in terrestrial and planetary systems, which have determined that apatite-melt partitioning of volatiles are best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, McCubbin et al., recently reported that the exchange coefficients vary in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite. In particular, solution calorimetry data of apatite compositions along the F-Cl join exhibit substantial excess enthalpies of mixing, and McCubbin et al. reported substantial deviations in the Cl-F exchange Kd along the F-Cl apatite join that could be explained by the preferential incorporation of F into apatite. In the present study, we assess the effect of apatite crystal chemistry on F-Cl exchange equilibria between apatite and melt at 4 GPa over the temperature range of 1300-1500 C. The goal of these experiments is to assess the variation in the Ap-melt Cl-F exchange Kd over a broad range of F:Cl ratios in apatite. The results of these experiments could be used to understand at what composition apatite shifts from a hexagonal unit cell with space group P63/m to a unit cell with monoclinic symmetry within space group P21/b. We anticipate that this transition occurs at >70% chlorapatite based on solution calorimetry data.

McCubbin, F. M.↗
NASA NTRS2017

Experimental Constraints on the Partitioning Behavior of F, Cl, and OH Between Apatite and Basaltic Melt

The mineral apatite is present in a wide range of planetary materials. The presence of volatiles (F, Cl, and OH) within its crystal structure (X-site) have motivated numerous studies to investigate the partitioning behavior of F, Cl, and OH between apatite and silicate melt with the end goal of using apatite to constrain the volatile contents of planetary magmas and mantle sources. A number of recent experimental studies have investigated the apatite-melt partitioning behavior of F, Cl, and OH in magmatic systems. Apatite-melt partitioning of volatiles are best described as exchange equilibria similar to Fe-Mg partitioning between olivine and silicate melt. However, the partitioning behavior is likely to change as a function of temperature, pressure, oxygen fugacity, apatite composition, and melt composition. In the present study, we have conducted experiments to assess the partitioning behavior of F, Cl, and OH between apatite and silicate melt over a pressure range of 0-6 gigapascals, a temperature range of 950-1500 degrees Centigrade, and a wide range of apatite ternary compositions. All of the experiments were conducted between iron-wustite oxidation potentials IW minus 1 and IW plus 2 in a basaltic melt composition. The experimental run products were analyzed by a combination of electron probe microanalysis and secondary ion mass spectrometry (NanoSIMS). Temperature, apatite crystal chemistry, and pressure all play important roles in the partitioning behavior of F, Cl, and OH between apatite and silicate melt. In portions of apatite ternary space that undergo ideal mixing of F, Cl, and OH, exchange coefficients remain constant at constant temperature and pressure. However, exchange coefficients vary at constant temperature (T) and pressure (P) in portions of apatite compositional space where F, Cl, and OH do not mix ideally in apatite. The variation in exchange coefficients exhibited by apatite that does not undergo ideal mixing far exceeds the variations induced by changes in temperature (T) or pressure (P) . In regions where apatite undergoes ideal mixing of F, Cl, and OH, temperature has a stronger effect than pressure on the partitioning behavior, but both are important. Furthermore, fluorine becomes less compatible in apatite with increasing pressure and temperature. We are still in the process of analyzing our experimental run products, but we plan to quantify the effects of P and T on apatite-melt partitioning of F, Cl, and OH.

McCubbin, Francis M.↗
DOE OSTI2017

Co-variability of S 6+ , S 4+ , and S 2- in apatite as a function of oxidation state: Implications for a new oxybarometer

In this study, we use micro-X-ray absorption near-edge structures (μ-XANES) spectroscopy at the S K-edge to investigate the oxidation state of S in natural magmatic-hydrothermal apatite (Durango, Mexico, and Mina Carmen, Chile) and experimental apatites crystallized from volatile-saturated lamproitic melts at 1000 °C and 300 MPa over a broad range of oxygen fugacities [( Embedded Image , FMQ+1.2, FMQ+3; FMQ = fayalite-magnetite-quartz solid buffer]. The data are used to test the hypothesis that S oxidation states other than S6+ may substitute into the apatite structure. Peak energies corresponding to sulfate S6+ (~2482 eV), sulfite S4+ (~2478 eV), and sulfide S2- (~2470 eV) were observed in apatite, and the integrated areas of the different sulfur peaks correspond to changes in Embedded Image and bulk S content. Here, multiple tests confirmed that the S oxidation state in apatite remains constant when exposed to the synchrotron beam, at least for up to 1 h exposure (i.e., no irradiation damages). To our knowledge, this observation makes apatite the first mineral to incorporate reduced (S2-), intermediate (S4+), and oxidized (S6+) S in variable proportions as a function of the prevailing Embedded Image of the system. Apatites crystallized under oxidizing conditions (FMQ+1.2 and FMQ+3), where the S6+/STotal peak area ratio in the coexisting glass (i.e., quenched melt) is ~1, are dominated by S6+ with a small contribution of S4+, whereas apatites crystallizing at reduced conditions (FMQ) contain predominantly S2-, lesser amounts of S6+, and possibly traces of S4+. A sulfur oxidation state vs. S concentration analytical line transect across hydrothermally altered apatite from the Mina Carmen iron oxide-apatite (IOA) deposit (Chile) demonstrates that apatite can become enriched in S4+ relative to S6+, indicating metasomatic overprinting via a SO2-bearing fluid or vapor phase. This XANES study demonstrates that as the Embedded Image increases from FQM to FMQ+1.2 to FMQ+3 the oxidation state of S in igneous apatite changes from S2- dominant to S6+ > S4+ to S6+ >> S4+. Furthermore, these results suggest that spectroscopic studies of igneous apatite have potential to trace the oxidation state of S in magmas. The presence of three S oxidations states in apatite may in part explain the non-Henrian partitioning of S between apatite and melt. Our study reveals the potential to use the S signature of apatite to elucidate both oxygen and sulfur fugacity in magmatic and hydrothermal systems.

58 GEOSCIENCES↗
DOE OSTI2023

Eu speciation in apatite at 1 bar: An experimental study of valence-state partitioning by XANES, lattice strain, and Eu/Eu* in basaltic systems

Abstract Partition coefficients for rare earth elements (REEs) between apatite and basaltic melt were determined as a function of oxygen fugacity (fO2; iron-wüstite to hematite-magnetite buffers) at 1 bar and between 1110 and 1175 °C. Apatite-melt partitioning data for REE3+ (La, Sm, Gd, Lu) show near constant values at all experimental conditions, while bulk Eu becomes more incompatible (with an increasing negative anomaly) with decreasing fO2. Experiments define three apatite calibrations that can theoretically be used as redox sensors. The first, a XANES calibration that directly measures Eu valence in apatite, requires saturation at similar temperature-composition conditions to experiments and is defined by: ( E u 3 + ∑ E u ) Apatite = 1 1 + 10 - 0.10 ± 0.01 × l o g ⁡ ( f o 2 ) - 1.63 ± 0.16 . The second technique involves analysis of Sm, Eu, and Gd in both apatite and coexisting basaltic melt (glass), and is defined by: ( Eu E u * ) D Sm × Gd = 1 1 + 10 - 0.15 ± 0.03 × l o g ⁡ ( f o 2 ) - 2.46 ± 0.41 . The third technique is based on the lattice strain model and also requires analysis of REE in both apatite and basalt. This calibration is defined by ( Eu E u * ) D lattice strain = 1 1 + 10 - 0.20 ± 0.03 × l o g ⁡ ( f o 2 ) - 3.03 ± 0.42 . The Eu valence-state partitioning techniques based on (Sm×Gd) and lattice strain are virtually indistinguishable, such that either methodology is valid. Application of any of these calibrations is best carried out in systems where both apatite and coexisting glass are present and in direct contact with one another. In holocrystalline rocks, whole rock analyses can be used as a guide to melt composition, but considerations and corrections must be made to either the lattice strain or Sm×Gd techniques to ensure that the effect of plagioclase crystallization either prior to or during apatite growth can be removed. Similarly, if the melt source has an inherited either a positive or negative Eu anomaly, appropriate corrections must also be made to lattice strain or Sm×Gd techniques that are based on whole rock analyses. This being the case, if apatite is primary and saturates from the parent melt early during the crystallization sequence, these corrections may be minimal. The partition coefficients for the REE between apatite and melt range from a maximum DEu3+ = 1.67 ± 0.25 (as determined by lattice strain) to DLu3+ = 0.69 ± 0.10. The REE partition coefficient pattern, as observed in the Onuma diagram, is in a fortuitous situation where the most compatible REE (Eu3+) is also the polyvalent element used to monitor fO2. These experiments provide a quantitative means of assessing Eu anomalies in apatite and how they be used to constrain the oxygen fugacity of silicate melts.

Geochemistry & Geophysics↗
DOE OSTI2023

The Oxidation State of Sulfur in Apatite of Martian Meteorite—Shergotty

Apatite can incorporate sulfur in its reduced form (S 2− ) when apatite equilibrates with a silicate melt under reducing conditions. Incorporation of sulfate (S 6+ ) has been observed in terrestrial apatite under oxidizing conditions. Thus, it has been suggested that the proportions of S 6+ /S 2− in apatite may record the oxygen fugacity ( f O 2 ) during the formation and/or equilibration of apatite grains with a silicate melt in a wide variety of igneous and metamorphic rocks, including from Earth, Mars, the Moon, and in materials from the asteroid belt. Martian rocks, which record f O 2 values intermediate between those recorded by rocks from the Moon and Earth, may have apatite that contains only S 2− or mixtures of S 6+ and S 2− . Here, we present new measurements of the oxidation state of sulfur in apatite grains in the basaltic shergottite, Shergotty, which exhibits spectral features consistent with the presence of sulfide (S 2− ) structurally bound in apatite, and no evidence for the presence of sulfite (S 4+ ) or sulfate (S 6+ ). Further, the presence of sulfide-only apatite in Shergotty is consistent with other mineralogical records of f O 2 in this meteorite, which are calculated from other late-stage crystallizing phases like Fe-Ti oxides as well as from early crystallizing phases like clinopyroxene ( D Eu Cpx/melt ) of ΔIW + 1.9 to ΔIW + 3.5. At these f O 2 values, S is present in silicate melts as only S 2− , and this suggests that the oxidation state of sulfur records and preserves the f O 2 during the igneous crystallization of apatite reinforcing the idea that sulfur in apatite can be used as an igneous oxybarometer.

58 GEOSCIENCES↗
NASA NTRSDate not supplied

Apatite Nanoresponse to Acidic Dissolution

Phosphorus uptake by plants and organisms is one of the most important life-sustaining processes occurring in the critical zone (CZ). Because 95% of Earth’s reserves is relatively immobile in the form of apatite, plants and organisms rely on molecular scale solubilization process to extract available P. As the world experiences a global P shortage, influencing food production, it becomes increasingly important to understand apatite dissolution. The detailed study of chemically weathered apatite surfaces at the μm to nm-scale is key to understanding P solubilization and uptake in the CZ, allowing for better crop management and efficient fertilization. Apatite weathering is generally viewed in terms of a pH-dependent process where protons weaken atomic bonds, this leading to the disintegration of the apatite structure. A general feature of apatite weathering in acid and near neutral pH conditions is an apparent non-stoichiometric dissolution characterized by [Ca/P]aq > 1.66 in both fluorapatites (FAP) and hydroxyapatites (HAP). This process leads to the formation of a surface altered layer (SAL) with a different composition from the bulk, which many have argued is a Ca-depleted “leached layer.” We investigated apatite weathering at the nanoscale using FIB-prepared TEM-foils. Our preliminary results based on laboratory-altered FAP at ambient T and pH 3 show the formation of amorphous SALs with a maximum thickness of ~10 nm. High resolution chemical mapping and profiling using STEM-EELS and STEM-EDXS indicate that the SALs are generally, but not always, depleted in Ca and enriched in P. These results provide an alternate view of the mechanism of apatite dissolution with stoichiometric breakdown of the apatite structure, followed by the reprecipitation of an amorphous surface layer depleted in Ca. This mechanism can be described in terms of coupled interfacial dissolution-reprecipitation (CIDR), which is increasingly viewed as a universal mechanism of silicate mineral and glass dissolution. Our observation that apatite may dissolve similarly to silicates implies not only that apatite weathering may be more complex than originally thought, but also that the CIDR mechanism may extend beyond silicates.

mineralogy↗
NASA NTRS2023

On the Origin of Fluorine-Poor Apatite in Chondrite Parent Bodies

We conducted a petrologic study of apatite within one LL chondrite, six R chondrites, and six CK chondrites. These data were combined with previously published apatite data from a broader range of chondrite meteorites to determine that chondrites host either chlorapatite or hydroxylapatite with ≤33 mol% F in the apatite X-site (unless affected by partial melting by impacts, which can cause F-enrichment of residual apatite). These data indicate that either fluorapatite was not a primary condensate from the solar nebula or that it did not survive lower temperature nebular processes and/or parent body processes. Bulk-rock Cl and F data from chondrites were used to determine that the solar system has a Cl/F ratio of 10.5 ± 1.0 (3σ). The Cl/F ratios of apatite from chondrites are broadly reflective of the solar system Cl/F value, indicating that apatite in chondrites is fluorine poor because the solar system has about an order of magnitude more Cl than F. The Cl/F ratio of the solar system was combined with known apatite-melt partitioning relationships for F and Cl to predict the range of apatite compositions that would form from a melt with a chondritic Cl/F ratio. This range of apatite compositions allowed for the development of a crude model to use apatite X-site compositions from achondrites (and chondrite melt rocks) to determine whether they derive from a volatile-depleted and/or differentiated source, albeit with important caveats that are detailed in the manuscript. This study further highlights the utility of apatite as a mineralogical tool to understand the origin of volatiles (including H 2 O) and the diversity of their associated geological processes throughout the history of our solar system, including at its nascent stage.

Francis M. McCubbin↗
DOE OSTI2018

Comparative SEM and TEM analyses of apatite phases prepared by a multi-sample loading device

Highlights: • A multi-sample loading device which ultrasonically disperses samples was developed. • Comparative EM analyses on various apatite phases were efficiently carried out. • SEM-EDS data revealed distinctive values of O/P and Ca/P intensity ratios. • TEM-SAED data presented characteristic structural features of apatite phases. • Lattice parameters of bone and fossil apatite were affected by CO{sub 3} content. - Abstract: Comparative chemical and structural characterization of various apatite phases from both synthetic and natural sources were carried out by utilizing a multi-sample loading device developed for scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. The device is capable of spraying nanoparticles via ultrasonication, and four separate samples were loaded on a single TEM grid by a masking tool to characterize different apatite phases in consistent instrumental and analytical conditions. SEM energy dispersive spectroscopy (EDS) analysis of the apatite samples revealed distinctive values of O/P and Ca/P intensity ratios except for the fossil apatite due to its high proportion of externally originating phases. Selected area electron diffraction (SAED) pattern analysis presented the characteristic lattice parameters of the apatite phases, especially the bone and fossil apatite which had CO{sub 3}in their chemistry. Analyzing distinctive chemical and structural features among varied apatite phases can be efficiently carried out through electron microscopy with multiple samples on a single TEM grid, and such methods can be employed for characterizing a wider range of materials.

36 MATERIALS SCIENCE↗