Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY ALLOYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Durian-Inspired Design of Bismuth–Antimony Alloy Arrays for Robust Sodium Storage

Sodium-ion batteries have attracted widespread attention for cost-effective and large-scale electric energy storage. However, their practical deployment has been largely retarded by the lack of choice of efficient anode materials featuring large capacity and electrochemical stability and robustness. Herein, we report a durian-inspired design and template-free fabrication of a robust sodium anode based on triangular pyramid arrays of Bi 0.75 Sb 0.25 alloy electrodeposited on Cu substrates. The Bi 0.75 Sb 0.25 arrays exhibit an appreciable electrochemical robustness for sodium storage, sustaining a reversible capability 335 mAh g –1 at a high rate of 2.5 A g –1 and 87% of the initial capacity over 2000 cycles. We further demonstrate the applicability of the Bi 0.75 Sb 0.25 array anode in sodium full cells by pairing it with a Na 3 V 2 (PO 4 ) 3 /C cathode. This full cell achieves a high specific energy of 203 Wh kg –1 (based on both active electrodes). Such an enhanced performance is attributed to the thorny-durian-like architecture and bimetallic alloy composition. In conclusion, the pyramid tip induces ion enrichment for rapid charge-transfer reaction, while the alloy design reduces the electrode volume swelling for stable Na cycling.

25 ENERGY STORAGE↗

Calcium-Antimony Alloys as Electrodes for Liquid Metal Batteries

The performance of a calcium-antimony (Ca-Sb) alloy serving as the positive electrode in a Ca vertical bar vertical bar Sb liquid metal battery was investigated in an electrochemical cell, Ca(in Bi) vertical bar LiCl-NaCl-CaCl2 vertical bar Ca(in Sb). The equilibrium potential of the Ca-Sb electrode was found to lie on the interval, 1.2-0.95 V versus Ca, in good agreement with electromotive force (emf) measurements in the literature. During both alloying and dealloying of Ca at the Sb electrode, the charge transfer and mass transport at the interface are facile enough that the electrode potential varies linearly from 0.95 to 0.75 V vs Ca(s) as current density varies from 50 to 500 mA cm(-2). The discharge capacity of the Ca vertical bar vertical bar Sb cells increases as the operating temperature increases due to the higher solubility and diffusivity of Ca in Sb. The cell was successfully cycled with high coulombic efficiency (similar to 100%) and small fade rate (<0.01% cycle(-1)). These data combined with the favorable costs of these metals and salts make the Ca vertical bar vertical bar Sb liquid metal battery attractive for grid-scale energy storage. (C) The Author(s) 2014. Published by ECS. All rights reserved.

Ouchi, T↗

Stable bismuth-antimony alloy cathode with a conversion-dissolution/deposition mechanism for high-performance zinc batteries

Although a large number of intercalation cathode materials for aqueous Zn batteries have been reported, limited intercalation capacity precludes achieving a higher energy density. Here, for this work, we develop a high-performance aqueous Zn battery based on BiSb alloy (Bi 0.5 Sb 0.5 ) using a high-concentrated strong-basic polyelectrolyte. We demonstrate that a conversion-dissolution/deposition electrochemical mechanism (BiSb ↔ Bi + SbO 2 – ↔ Bi + SbO 3 – ↔ Bi 2 O 3 ) through in situ X-ray diffraction (XRD), Raman, and ex-situ X-ray photoelectron spectrometry (XPS) characterizations with the help of density functional theory calculations. The BiSb cathode delivers large capacity of 512 mAh g –1 at 0.3 Ag –1 and superior rate capability of 90 mAh g –1 even at 20 Ag –1 , and long-term cyclability with capacity retentions of 184 mAh g –1 after 600 cycles at 0.5 Ag –1 and 130 mAh g –1 after 1300 cycles at 1 Ag –1 . Remarkably, even at temperatures as low as –10 and –20 °C, capacities of 210 and 197 mAh g –1 are reserved at 1 Ag –1 , respectively. Moreover, the prepared pouch Zn//BiSb battery delivers a high energy density of 303 Wh kg –1 BiSb at 0.3 Ag –1 . When coupled with a high concentration polyelectrolyte, the Zn/BiSb battery exhibits an excellent performance over a wide temperature range (–40 to 40 °C). Our research reveals the metal cathode is promising for Zn batteries to achieve a high performance with the unique mechanism and alloys can be an effective approach to stabilize metal electrodes for cycling.

25 ENERGY STORAGE↗

Shape Effect in Layering of Solid Solutions in Small Volume: Bismuth–Antimony Alloy

The regularities of the effect of the shape of interphase boundaries in small volume systems on the separation of solutions with an upper critical solution temperature (UCST) are described by the example of Bi–Sb alloy particles with a core–shell configuration. The change in the shape of interphase boundaries is simulated in general by introducing a parameter corresponding to the degree of deviation of the shape of the boundaries from the spherical one. An analysis of the extrema of the Gibbs function revealed regularities in the effect of the shape of the core and shell phases on phase equilibria, the thermodynamic stability of heterogeneous states, and the phase separation diagram. The deviation of the shape of the interphase boundaries from the spherical shape changes the UCST and the mutual solubility of the components. The deformation of the shell of a core–shell particle increases the thermodynamic stability of the heterogeneous state, which contributes to the separation of the solution. The deformation of the core lowers the thermodynamic stability of the heterogeneous state and expands the range of metastable states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface Promoted Reversible Mg Insertion in Nanostructured Tin-Antimony Alloys

This paper demonstrates intermetallic compounds SnSb are highly active materials for reversibly hosting Mg ions. Compared with monometallic Sn and Sb, SnSb alloy exhibited exceptionally high reversible capacity (420 mAh/g), excellent rate capability and good cyclic stability. Mg insertion into pristine SnSb involves an activation process to complete, which induces particle breakdown and results in phase segregation to Sn-rich and Sb-rich phases. Both experimental analysis and DFT simulation suggest that the Sn-rich phase is particularly active and provides most of the capacity whereas the Sb-rich phase is not as active, and the interface between these two phases play a key role in promoting the formation and stabilization of the cubic Sn phase that is more favorable for fast and reversible Mg insertion. We further show that activated SnSb alloy has good compatibility with simple Mg electrolytes. Overall, this work could provide new approaches for designing materials capable of reversible Mg ion insertion and new opportunities for understanding Mg electrochemistry.

Environmental Molecular Sciences Laboratory↗

Determination and modeling of the thermodynamic properties of liquid calcium-antimony alloys

The thermodynamic properties of Ca-Sb alloys were determined by emf measurements in a cell configured as Ca(s)vertical bar CaF2 vertical bar Ca-Sb over the temperature range 550-830 degrees C. Activity coefficients of Ca and Sb, enthalpy, Gibbs free energy, and entropy of mixing of Ca-Sb alloys were calculated for xc(a) < 0.55. To explain the connection between short-range order of liquid Ca-Sb alloys and the strong deviation from ideality in the thermodynamic properties, two thermodynamic models were invoked and reconciled: the regular associated solution model, assuming the presence of a CaSb2 associate, and the molecular interaction volume model (MIVM). For the first time, the MIVM was used successfully to model the activity coefficients of a system with high-melting intermetallics, reducing the number of fitting parameters necessary from 5 (regular associated model) to 2 (MIVM). From the interaction parameters optimized by fitting at 800 degrees C, the with an average error of less than value. (C) 2012 Elsevier Ltd. All rights reserved,

Poizeau, S↗

Evaluation of Sb-Nd and Te-Nd phases within the U-Zr fuel matrix and their interactions with HT9 alloy

Antimony (Sb) and tellurium (Te) were investigated as potential additives for U-10Zr (wt.%) metallic fuel to limit the fuel-cladding chemical interaction (FCCI) with HT-9 alloy. Neodymium (Nd) was utilized to simulate the formation of lanthanide-based solid fission products which are known to play a detrimental role in FCCI. Fuel alloys of U-Zr-Sb-Nd and U-Zr-Te-Nd were evaluated in their annealed condition and compared against their as-cast conditions. Isothermal diffusion couple experiments were performed between U-Zr-Nd, U-Zr-Sb-Nd, and U-Zr-Te-Nd against the cladding alloy HT9 to evaluate the effectiveness of the additives to stabilize Nd within the fuel alloys, as well as investigate the interaction regions that form between the different fuel alloys and HT9. Further, SbNd and Sb 3 Nd 4 , and TeNd are found to be the primary neodymium-based phases formed in the U-Zr-Sb-Nd and U-Zr-Te-Nd alloys, respectively. The zirconium-based phase, Zr 2 Sb, is also found to form within the former alloy. All phases were found to remain stable through the diffusion experiments and exhibited no interaction with HT9 constituent elements. Preferential interaction between Nd with additivities Te and Sb compared to constituting elements in HT9 was further verified based on density functional theory (DFT) calculated enthalpy of mixing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal Design, Analysis, and Testing of the Quench Module Insert Bread Board

The science requirements for materials processing is to provide the desired PI requirements of thermal gradient, solid/liquid interface front velocity for a given processing temperature desired by the PI. Processing is performed by translating the furnace with the sample in a stationary position to minimize any disturbances to the solid/liquid interface front during steady state processing. Typical sample materials for this metals and alloys furnace are lead-tin alloys, lead-antimony alloys, and aluminum alloys. Samples must be safe to process and therefore typically are contained with hermetically sealed cartridge tubes (gas tight) with inner ceramic liners (liquid tight) to prevent contamination and/or reaction of the sample material with the cartridge tube.

Breeding Shawn↗

Effects of oxygen incorporation in GeSbTe films on electrical properties and thermal stability

Oxygen incorporated Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) films were prepared by an ion beam sputtering deposition method. I-V curves of the oxygen incorporated GST active layer showed that the threshold voltage (V{sub th}) varied, depending on the level of incorporated oxygen. In the case of a GST film with an elevated oxygen content of 30.8%, the GST layer melted at 9.02 V due to the instability conferred by the high oxygen content. The formation of Ge-deficient hexagonal phases such as GeSb{sub 2}Te{sub 4} and Sb{sub 2}Te{sub 3} appear to be responsible for the V{sub th} variation. Impedance analyses indicated that the resistance in GST films with oxygen contents of 16.7% and 21.7% had different origins. Thermal desorption spectroscopy data indicate that moisture and hydrocarbons were more readily desorbed at higher oxygen content because the oxygen incorporated GST films are more hydrophilic than undoped GST films.

36 MATERIALS SCIENCE↗

Bandgap Tunability in Sb-Alloyed BiVO 4 Quaternary Oxides as Visible Light Absorbers for Solar Fuel Applications

Here, the challenge of fine compositional tuning and microstructure control in complex oxides is overcome by developing a general two-step synthetic approach. Antimony-alloyed bismuth vanadate, which is identified as a novel light absorber for solar fuel applications, is prepared in a wide compositional range. The bandgap of this quaternary oxide linearly decreases with the Sb content, in agreement with first-principles calculations.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators on GaAs (111) substrates: a potential route to fabricate topological insulator p-n junction

High quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators films were epitaxially grown on GaAs (111) substrate using solid source molecular beam epitaxy. Their growth and behavior on both vicinal and non-vicinal GaAs (111) substrates were investigated by reflection high-energy electron diffraction, atomic force microscopy, X-ray diffraction, and high resolution transmission electron microscopy. It is found that non-vicinal GaAs (111) substrate is better than a vicinal substrate to provide high quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} films. Hall and magnetoresistance measurements indicate that p type Sb{sub 2}Te{sub 3} and n type Bi{sub 2}Te{sub 3} topological insulator films can be directly grown on a GaAs (111) substrate, which may pave a way to fabricate topological insulator p-n junction on the same substrate, compatible with the fabrication process of present semiconductor optoelectronic devices.

36 MATERIALS SCIENCE↗

First principles calculations of electronic structure and magnetic properties of Cr-based magnetic semiconductors Al{sub 1-x}Cr{sub x}X (X=N, P, As, Sb)

First principles calculations based on the density functional theory (DFT) within the local spin density approximation are performed to investigate the electronic structure and magnetic properties of Cr-based zinc blende diluted magnetic semiconductors Al{sub 1-x}Cr{sub x}X (X=N, P, As, Sb) for 0<=x<=0.50.The behaviour of magnetic moment of Al{sub 1-x}Cr{sub x}X at each Cr site as well as the change in the band gap value due to spin down electrons has been studied by increasing the concentration of Cr atom and through changing X from N to Sb. Furthermore, the role of p-d hybridization is analyzed in the electronic band structure and exchange splitting of d-dominated bands. The interaction strength is stronger in Al{sub 1-x}Cr{sub x}N and becomes weaker in Al{sub 1-x}Cr{sub x}Sb. The band gap due to the spin down electrons decreases with the increased concentration of Cr in Al{sub 1-x}Cr{sub x}X, and as one moves down along the isoelectronic series in the group V from N to Sb. Our calculations also verify the half-metallic ferromagnetic character in Cr doped AlX. - Graphical abstract: The prototype structures of Cr doped AlX (X=N, P, As, Sb) compounds: (A) zinc blende AlP for x=0, (B) Cr{sub 1}Al{sub 7}P{sub 8} for x=0.125, (C) Cr{sub 1}Al{sub 3}P{sub 4} for x=0.25, (D) Cr{sub 1}Al{sub 1}P{sub 2} for x=0.5.

36 MATERIALS SCIENCE↗

Effects of Rh on the thermoelectric performance of the p-type Zr{sub 0.5}Hf{sub 0.5}Co{sub 1-x}Rh{sub x}Sb{sub 0.99}Sn{sub 0.01} half-Heusler alloys

We show that Rh substitution at the Co site in Zr{sub 0.5}Hf{sub 0.5}Co{sub 1-x}Rh{sub x}Sb{sub 0.99}Sn{sub 0.01} (0<=x<=1) half-Heusler alloys strongly reduces the thermal conductivity with a simultaneous, significant improvement of the power factor of the materials. Thermoelectric properties of hot-pressed pellets of several compositions with various Rh concentrations were investigated in the temperature range from 300 to 775 K. The Rh 'free' composition shows n-type conduction, while Rh substitution at the Co site drives the system to p-type semiconducting behavior. The lattice thermal conductivity of Zr{sub 0.5}Hf{sub 0.5}Co{sub 1-x}Rh{sub x}Sb{sub 0.99}Sn{sub 0.01} alloys rapidly decreased with increasing Rh concentration and lattice thermal conductivity as low as 3.7 W/m*K was obtained at 300 K for Zr{sub 0.5}Hf{sub 0.5}RhSb{sub 0.99}Sn{sub 0.01}. The drastic reduction of the lattice thermal conductivity is attributed to mass fluctuation induced by the Rh substitution at the Co site, as well as enhanced phonon scattering at grain boundaries due to the small grain size of the synthesized materials. - Graphical abstract: Significant reduction of the lattice thermal conductivity with increasing Rh concentration in the p-type Zr{sub 0.5}Hf{sub 0.5}Co{sub 1-x}Rh{sub x}Sb{sub 0.99}Sn{sub 0.01} half-Heusler materials prepared by solid state reaction at 1173 K.

36 MATERIALS SCIENCE↗

Beneficial influence of Ru on the thermoelectric properties of Mo{sub 3}Sb{sub 7}

Zintl phases have recently been identified as potential thermoelectric materials typified by the discovery of a high thermoelectric figure of merit in the Yb{sub 14}MnSb{sub 11} compound above 1000 K. We report on the synthesis and the thermoelectric properties measurements over a wide temperature range (300-1000 K) of other Zintl phases exhibiting a complex crystalline structure, namely, Mo{sub 3}Sb{sub 7} and its related compounds Mo{sub 3-x}Ru{sub x}Sb{sub 7}. While the binary compound displays low figure of merit values due to its metallic nature, we show that the partial substitution of Mo by Ru significantly improves its value to reach 0.45 at 1000 K in Mo{sub 2.2}Ru{sub 0.8}Sb{sub 7}.

36 MATERIALS SCIENCE↗

Electronic structure of (Ge{sub 2}Sb{sub 2}Te{sub 5}){sub 1-x}(In{sub 3}SbTe{sub 2}){sub x} investigated by x-ray photoelectron spectroscopy

We have investigated the core levels and the valence band of (Ge{sub 2}Sb{sub 2}Te{sub 5}){sub 1-x}(In{sub 3}Sb{sub 1}Te{sub 2}){sub x} quaternary phase system (IGST) by means of x-ray photoelectron spectroscopy. A systematic shift of Sb 3d and Ge 2p core-level peaks toward lower binding energies side was observed with increasing indium amount, whereas the In 3d and Te 3d core peaks showed less change. The Sb 3d and Ge 2p core-level shift is attributed to an increase in the electronic charge of p-electrons dependent of indium amount. The valence band spectra show a distinct change in the sp configuration with indium concentration change. The change in the local bonding as the indium amount increase has a profound impact on both local atomic arrangement and amorphous-to-crystalline transformation temperature. The difference in the photoemission spectra have been discussed according to a simple structural model suggesting that the Na site in IGST can be occupied by Te, Sb, In, and vacancy, whereas in GST it is occupied only by Te.

36 MATERIALS SCIENCE↗

Ab initio calculations and synthesis of the off-stoichiometric half-Heusler phase Ni{sub 1-x}Mn{sub 1+x}Sb

We perform a combined theoretical and experimental study of the phase stability and magnetism of the off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb in the half-Heusler crystal phase. Our work is motivated by the need for strategies to engineer the magnetism of potentially half-metallic materials, such as NiMnSb, for improved performance at elevated temperatures. By means of ab initio calculations we investigate Ni{sub 1-x}Mn{sub 1+x}Sb over the whole composition range 0{<=}x{<=}1 of Ni replacing Mn and show that at relevant temperatures, the half-Heusler phase should be thermodynamically stable up to at least x=0.20 with respect to the competing C38 structure of Mn{sub 2}Sb. Furthermore we find that half-Heusler Ni{sub 1-x}Mn{sub 1+x}Sb retains half-metallic band structure over the whole concentration range and that the magnetic moments of substitutional Mn{sub Ni} atoms display magnetic exchange interactions an order of magnitude larger than the Ni-Mn interaction in NiMnSb. We also demonstrate experimentally that the alloys indeed can be created by synthesizing off-stoichiometric Ni{sub 1-x}Mn{sub 1+x}Sb films on MgO substrates by means of magnetron sputtering.

36 MATERIALS SCIENCE↗

ZnO homojunction photodiodes based on Sb-doped p-type nanowire array and n-type film for ultraviolet detection

ZnO p-n homojunctions based on Sb-doped p-type nanowire array and n-type film were grown by combining chemical vapor deposition (for nanowires) with molecular-beam epitaxy (for film). Indium tin oxide and Ti/Au were used as contacts to the ZnO nanowires and film, respectively. Characteristics of field-effect transistors using ZnO nanowires as channels indicate p-type conductivity of the nanowires. Electron beam induced current profiling confirmed the existence of ZnO p-n homojunction. Rectifying I-V characteristic showed a turn-on voltage of around 3 V. Very good response to ultraviolet light illumination was observed from photocurrent measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗