Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONY 111”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Antimony-assisted carbonization of Si(111) with solid source molecular beam epitaxy

The carbonization of an antimony-terminated Si (111) surface in a solid source molecular beam epitaxy system is presented. Reflection high-energy electron diffraction, atomic force microscopy, x-ray photoelectron spectroscopy, and cross-sectional transmission electron microscopy are used to characterize samples grown with and without antimony termination. It is shown that the antimony-terminated surface promotes the formation of thin, smooth and continuous SiC films at a relatively low temperature of 800 °C.

36 MATERIALS SCIENCE↗

Nuclear Data Sheets for A = 111

This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

X-ray scattering by porous silicon modulated structures

A multilayered porous structure formed as a result of the anodization of a Si(111)(Sb) substrate in an HF:C{sub 2}H{sub 5}OH (1: 2) solution with a periodically alternating current has been investigated by high-resolution X-ray diffraction. It is established that, despite 50% porosity, a thickness of 30 {mu}m, and significant strain (4 Multiplication-Sign 10{sup -3)}, the porous silicon structure consists mainly of coherent crystallites. A model of coherent scattering from a multilayered periodic porous structure is proposed within the dynamic theory of diffraction. It is shown that the presence of gradient strains of 5 Multiplication-Sign 10{sup -4} or higher leads to phase loss upon scattering from porous superlattices and the suppression of characteristic satellites in rocking curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cross sections and production yields of 117m Sn and other radionuclides generated in natural and enriched antimony with protons up to 145 MeV

Cross sections of a prospective medical radionuclide 117m Sn along wit h 113 Sn, 120m,122 Sb, 111,114m In and 118,119m,119g,121m,121g,123m Te generated in natural and enriched antimony targets by protons in a wide energy range up to 145 MeV were determined. A stacked-foil technique followed by gas chemical separation and γ-ray spectrometry were used. The obtained data were compared with experimental values reported in literature and with theoretical computations by ALICE, TALYS and Cascade-Evaporation-Fission codes. Finally, production yields of 117m Sn and the main impurity 113 Sn were estimated for different irradiation modes.

07 ISOTOPE AND RADIATION SOURCES↗

Formation of medical radioisotopes {sup 111}In, {sup 117m}Sn, {sup 124}Sb, and {sup 177}Lu in photonuclear reactions

The possibility of the photonuclear production of radioisotopes {sup 111}In, {sup 117m}Sn, {sup 124}Sb, and {sup 177}Lu is discussed. Reaction yields were measured by the gamma-activation method. The enriched tin isotopes {sup 112,} {sup 118}Sn and Te and HfO{sub 2} of natural isotopic composition were used as targets. The targets were irradiated at the linear electron accelerator of Alikhanian National Science Laboratory (Yerevan) at the energy of 40 MeV. The experimental results obtained in this way reveal that the yield and purity of radioisotopes {sup 111}In and {sup 117}mSn are acceptable for their production via photonuclear reactions. Reactions proceeding on targets from Te and HfO{sub 2} of natural isotopic composition and leading to the formation of {sup 124}Sb and {sup 177}Lu have small yields and are hardly appropriate for the photoproduction of these radioisotopes even in the case of enriched targets.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation on the electrical transport properties of highly (00l)-textured Sb{sub 2}Te{sub 3} films deposited by molecular beam epitaxy

Highly (00l)-textured antimony telluride films were fabricated using molecular beam epitaxy (MBE) on Si (111) substrate at 280 °C. X-ray diffraction analysis implying the samples have good crystalline quality, simultaneously, the grain sizes coarsening with increasing thickness. The results of Hall coefficient measurement demonstrated that the carrier concentration and mobility are strongly affected by grain boundaries and microcrystalline internal defects. It was found that the grain boundaries play a primary factor influencing the carrier concentration in thinner film. At room temperature, the results in a maximum mobility value of 305 cm{sup 2}/Vs for 121-nm-thick film, and the electrical conductivity increased from 425.7 S/cm to 1036 S/cm as the thickness varied from 28 nm to 121 nm. In the range of room temperature to 150 °C, the resistivity almost linearly increased with increasing temperature. This may be explained by low concentration of impurities or defects and shallow impurity band. For difference thickness films, temperature coefficients of resistivity are substantially equal, and the values are about 3 ∼ 4 μΩ⋅cm/K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Potential variations around grain boundaries in impurity-doped BaSi₂ epitaxial films evaluated by Kelvin probe force microscopy

Potential variations around the grain boundaries (GBs) in antimony (Sb)-doped n-type and boron (B)-doped p-type BaSi₂ epitaxial films on Si(111) were evaluated by Kelvin probe force microscopy. Sb-doped n-BaSi₂ films exhibited positively charged GBs with a downward band bending at the GBs. The average barrier height for holes was approximately 10 meV for an electron concentration n ≈ 10¹⁷ cm⁻³. This downward band bending changed to upward band bending when n was increased to n = 1.8 × 10¹⁸cm⁻³. In the B-doped p-BaSi₂ films, the upward band bending was observed for a hole concentration p ≈ 10¹⁸cm⁻³. The average barrier height for electrons decreased from approximately 25 to 15 meV when p was increased from p = 2.7 × 10¹⁸ to p = 4.0 × 10¹⁸ cm⁻³. These results are explained under the assumption that the position of the Fermi level E{sub f} at GBs depends on the degree of occupancy of defect states at the GBs, while E{sub f} approached the bottom of the conduction band or the top of the valence band in the BaSi₂ grain interiors with increasing impurity concentrations. In both cases, such small barrier heights may not deteriorate the carrier transport properties. The electronic structures of impurity-doped BaSi₂ are also discussed using first-principles pseudopotential method to discuss the insertion sites of impurity atoms and clarify the reason for the observed n-type conduction in the Sb-doped BaSi₂ and p-type conduction in the B-doped BaSi₂.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antimony segregation in Si layers grown by molecular beam epitaxy on Si wafers with different crystallographic orientations

The segregation of Sb in Si layers grown by molecular beam epitaxy on Si substrates with the (111), (110), and (115) crystallographic orientations is studied; the results obtained for these orientations are compared with those obtained for the most widely used orientation (001). It is found that there is a qualitative similarity between the temperature dependences of the Sb segregation ratio (r) for all studied orientations; in particular, it is possible to separate two characteristic temperature ranges corresponding to the kinetically limited and equilibrium regimes of segregation. However, quantitatively, the values of r for the orientations under study differ significantly from those for the Si(001) case at the same temperatures. For all orientations, narrow temperature ranges within which the values of r vary by nearly five orders of magnitude are revealed for all dependences of r on the growth temperature. This finding allows us to adopt the method of selective doping, which was for the first time suggested by us for structures grown on Si (001) and is based on the controlled use of the segregation effect, to structures grown on Si substrates with an orientation different from (001). Using this method, selectively doped Si:Sb/Si(111) structures are fabricated; in these structures, a variation in the Sb concentration by an order of magnitude occurs at the scale of several nanometers.

36 MATERIALS SCIENCE↗

Electronic transport in heavily doped Ag/n-Si composite films

Hall measurements characterized Ag/n-Si composite films 1 micron thick produced by magnetron co-sputtering onto high resistivity Si (111) substrates at 550°C. The targets were Ag and n-type Si doped with 3 × 10{sup 19}/cm{sup 3} of antimony. Films were prepared with 13, 16 and 22 at. % Ag and measured over a temperature range 77–500°K. Conduction takes place at low temperatures by variable rang hopping in localized states at the Fermi level and by thermal activation over grain boundaries at higher temperatures. The Log Resistivity vs 1/kT curves for the three Ag concentrations vary in a similar manner, but decrease in magnitude with increasing Ag due to the smaller number of grain boundaries between Ag nanoparticles occurring with increasing Ag concentration. At low temperatures Hall mobilities are essentially independent of temperature as the carrier densities for the three Ag concentrations are constant from 77 to slightly under 300°K with resistivities varying by small amounts. The mobilities at all Ag concentrations increase with temperature and approach each other as the effects of grain boundaries become less important. This work presents for the first time the effects of metal particles embedded in a semiconductor on the transport properties of carriers in the semiconductor. Though these effects are for a given average particle size most of the results are expected to hold over a range of particle sizes. Free electrons produced in films containing 13 and 16 at. % Ag result in concentrations of 1.5 × 10{sup 19}/cm{sup 3}, one half the antimony doping, while those with 22 at. % Ag, the carrier concentrations are three orders of magnitude higher. These constant carrier concentrations are due to the metal-insulator transition that occurs in doped crystalline and polycrystalline silicon for carrier densities n{sub c} >3.9 × 10{sup 18}/cm{sup 3}. The three orders of magnitude higher carrier concentration produced in films with 22 at. % Ag is argued to be due to doping of the Si matrix by the Ag nanoparticles at this concentration, a doping effect previously observed in ErAs in InGaAs. A discussion of this doping effect is presented that is in keeping with the experimental observations though other factors such as particle size effects need further experimental confirmation. Thermal activation energies and grain boundary barrier heights were obtained from resistivity and Hall mobility data. The barrier heights of 0.360, 0.390 and 0.470 eV measured for films with Ag concentrations of 13, 16 and 22 at. % Ag respectively, are quite high compared to those obtained by other methods used for producing polycrystalline Si (10-100 mev) and need to be considerably reduced in order to increase the efficiency of the detectors for which these Ag/n-Si composite films will be used. Thermal annealing of as-deposited films is suggested as one means to accomplish this result.

36 MATERIALS SCIENCE↗

Theoretical investigation of Sn-doped Ge{sub 2}Sb{sub 2}Te{sub 5} alloy in crystalline phase

Ge{sub 2}Sb{sub 2}Te{sub 5} (GST) is technologically important for phase-change random access memory applications. It has been shown that the 2.2 atomic % doping of Sn weakens the Ge–Te bond strength while maintaining the symmetry of stable phase of GST. The influence of Sn doping upon the phase change characteristics of the crystalline GST alloy has been investigated by ab initio calculations. The lattice parameter, average interface distances between two adjacent (111) layers, equilibrium volume, metallic character and electrical resistance has been calculated for the stable phase of GST and Sn-doped GST.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quenching of the SnSbTe Cycle in the rp Process

The nuclides {sup 104-108}Sn, {sup 106-110}Sb, {sup 108,109}Te, and {sup 111}I at the expected endpoint of the astrophysical rp process have been produced in {sup 58}Ni+{sup nat}Ni fusion-evaporation reactions at IGISOL and their mass values were precisely measured with the JYFLTRAP Penning trap mass spectrometer. For {sup 106}Sb, {sup 108}Sb, and {sup 110}Sb these are the first direct experimental mass results obtained. The related one-proton separation energies have been derived and the value for {sup 106}Sb, S{sub p}=424(8) keV, shows that the branching into the closed SnSbTe cycle in the astrophysical rp process is weaker than expected.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Surfactant enhanced solid phase epitaxy of Ge/CaF{sub 2}/Si(111): Synchrotron x-ray characterization of structure and morphology

The structure and morphology of CaF{sub 2}/Si(111) and Ge/CaF{sub 2}/Si(111) layered structures with film thicknesses in the range of very few nanometers has been studied with synchrotron-based radiation. While the CaF{sub 2} film is grown via molecular beam epitaxy, the Ge film is fabricated by surfactant enhanced solid phase epitaxy with Sb as surfactant. The CaF{sub 2} film forms two laterally separated phases of relaxed CaF{sub 2} and pseudomorphic CaF{sub 2}, respectively, although the film thickness is very homogeneous. The Ge film is completely relaxed and forms A-oriented parts as well as B-oriented parts, due to twinning. In spite of the large surface roughness of the Ge film, it completely wets CaF{sub 2}/Si(111) also after annealing at 600 deg. C, due to the application of Sb during the annealing process.

36 MATERIALS SCIENCE↗

Structural characterization of InSb thin films grown by electrodeposition

In the present work we have grown InSb thin films on brass substrates, using the electrodeposition technique. The electrochemical baths used in the growth were made up of aqueous solutions of InCl{sub 3} and SbCl{sub 3} mixed together in various proportions. The films grown were characterized by X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive Analysis of X-rays (EDAX). Compositional studies show that stoichiometric InSb films can be prepared from a bath containing 0.05M InCl{sub 3} and 0.04M SbCl{sub 3}. XRD studies reveal that the films grown are polycrystalline having the zinc blende structure with (111) orientation. Crystallite size, dislocation density and strain were calculated using the XRD results. Optical transmission spectra were recorded using an FTIR spectrophotometer. The value of direct band gap was found to be around 0.20 eV for the thin films having the best stoichiometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved photoresponsivity of semiconducting BaSi{sub 2} epitaxial films grown on a tunnel junction for thin-film solar cells

The highest photoresponsivity and an internal quantum efficiency exceeding 70% at 1.55 eV were achieved for 400 nm thick undoped n-type BaSi{sub 2} epitaxial layers formed on a n{sup +}-BaSi{sub 2}/p{sup +}-Si tunnel junction (TJ) on Si(111). The diffusion of Sb atoms was effectively suppressed by an intermediate polycrystalline Si layer grown by solid phase epitaxy, located between the TJ and undoped BaSi{sub 2} layers.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators on GaAs (111) substrates: a potential route to fabricate topological insulator p-n junction

High quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators films were epitaxially grown on GaAs (111) substrate using solid source molecular beam epitaxy. Their growth and behavior on both vicinal and non-vicinal GaAs (111) substrates were investigated by reflection high-energy electron diffraction, atomic force microscopy, X-ray diffraction, and high resolution transmission electron microscopy. It is found that non-vicinal GaAs (111) substrate is better than a vicinal substrate to provide high quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} films. Hall and magnetoresistance measurements indicate that p type Sb{sub 2}Te{sub 3} and n type Bi{sub 2}Te{sub 3} topological insulator films can be directly grown on a GaAs (111) substrate, which may pave a way to fabricate topological insulator p-n junction on the same substrate, compatible with the fabrication process of present semiconductor optoelectronic devices.

36 MATERIALS SCIENCE↗

Volmer-Weber growth of AlSb on Si(111)

AlSb is grown by molecular beam epitaxy. The evolution and the relaxation of the deposited AlSb layer is investigated by synchrotron-based in situ grazing incidence x-ray diffraction (GID), and the analysis of the real space distribution is performed by atomic force microscopy. AlSb forms islands with (111)A polarity and {l_brace}110{r_brace} surface orientations with different side facets following the Volmer-Weber growth mode. GID investigations reveal facet rods originating from AlSb{l_brace}110{r_brace} islands. It is shown that a concentration of only 0.7% AlSb{l_brace}110{r_brace} oriented domains influences the diffraction pattern in such a way that additional crystal truncation rods parallel to the surface appear.

36 MATERIALS SCIENCE↗

Low temperature epitaxy of Ge-Sb-Te films on BaF{sub 2} (111) by pulsed laser deposition

Pulsed laser deposition was employed to deposit epitaxial Ge{sub 2}Sb{sub 2}Te{sub 5}-layers on the (111) plane of BaF{sub 2} single crystal substrates. X-ray diffraction measurements show a process temperature window for epitaxial growth between 85 °C and 295 °C. No crystalline growth is observed for lower temperatures, whereas higher temperatures lead to strong desorption of the film constituents. The films are of hexagonal structure with lattice parameters consistent with existing models. X-ray pole figure measurements reveal that the films grow with one single out-of-plane crystal orientation, but rotational twin domains are present. The out-of-plane epitaxial relationship is determined to be Ge{sub 2}Sb{sub 2}Te{sub 5}(0001) || BaF{sub 2}(111), whereas the in-plane relationship is characterized by two directions, i.e., Ge{sub 2}Sb{sub 2}Te{sub 5} [-12-10] || BaF{sub 2}[1-10] and Ge{sub 2}Sb{sub 2}Te{sub 5}[1-210] || BaF{sub 2}[1-10]. Aberration-corrected high-resolution scanning transmission electron microscopy was used to resolve the local atomic structure and confirm the hexagonal structure of the films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weyl semimetal phases and intrinsic spin-Hall conductivity in SbAs ordered alloys

Here, using density functional theory calculations, we investigated possible Weyl semimetal (WSM) phases in antimony arsenide ordered alloys Sb 1-x ⁢As x (x=0, 1/6, 1/3, 1/2, 2/3, 5/6, 1). We find WSM phases for all As compositions of Sb 1-x ⁢As x with broken inversion symmetry, in contrast to Bi 1-x⁢ Sb x where only compositions x=1/2 and 5/6 were predicted to exhibit WSM phases. The WSM phases in Sb 1-x ⁢As x are characterized by the presence of 12 Weyl points, located within 55 meV from the Fermi level in the case of x = 1/2. The robust spin-orbit coupling strength and Berry curvature in these alloys produce large spin-Hall conductivity in the range of 176–602 ($\hslash$/e)(S/cm), comparable to that in the BiSb alloys. Finally, Sb 0.5 ⁢As 0.5 is predicted to be almost lattice matched to GaAs(111), with the Fermi level within the gap of the semiconductor, facilitating growth and characterization, and thus, offering promising integration with conventional semiconductors.

36 MATERIALS SCIENCE↗