Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALUMINIUM 38”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A=38☆

All available experimental data of nuclear structure and decay are evaluated for the known nuclides of mass 38 (Mg, Al, Si, P, S, Cl, Ar, K, Ca, Sc, Ti). Detailed results of this evaluation are presented with the best values recommended for level energies, half-lives, γ-ray energies and intensities, decay properties (energies, intensities and placement of radiations), and other spectroscopic information. The {sup 38}Ar nuclide remains as the most extensively studied via various reactions and decays; no excited states are known in {sup 38}Al except for that an isomeric state is tentatively proposed from a recent β-decay measurement (2015St14); the {sup 38}Sc and {sup 38}Ti nuclides remain unidentified, with no experimental references reported for {sup 38}Sc and with a measurement of fragmentation cross sections reported for {sup 38}Ti but finding no evidence of its presence (1996Bl21). This work supersedes the earlier full evaluation of A=38 by J.A. Cameron and B. Singh (2008Ca01).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In situ high-energy synchrotron radiation study of boehmite formation, growth, and phase transformation to alumina in sub- and supercritical water.

Boehmite (AlOOH) nanoparticles have been synthesized in subcritical (300 bar, 350 C) and supercritical (300 bar, 400 C) water. The formation and growth of AlOOH nanoparticles were studied in situ by small- and wide-angle X-ray scattering (SAXS and WAXS) using 80 keV synchrotron radiation. The SAXS/WAXS data were measured simultaneously with a time resolution greater than 10 s and revealed the initial nucleation of amorphous particles takes place within 10 s with subsequent crystallization after 30 s. No diffraction signals were observed from Al(OH){sub 3} within the time resolution of the experiment, which shows that the dehydration step of the reaction is fast and the hydrolysis step rate-determining. The sizes of the crystalline particles were determined as a function of time. The overall size evolution patterns are similar in sub- and supercritical water, but the growth is faster and the final particle size larger under supercritical conditions. After approximately 5 min, the rate of particle growth decreases in both sub- and supercritical water. Heating of the boehmite nanoparticle suspension allowed an in situ X-ray investigation of the phase transformation of boehmite to aluminium oxide. Under the wet conditions used in this work, the transition starts at 530 C and gives a two-phase product of hydrated and non-hydrated aluminium oxide.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A Gamma Assay System for Characterizing Excavated Soil with High {sup 137}Cs and {sup 90}Sr Contamination - 19460

We report on the recent development of a remote gamma-assay system for the measurement and characterization of high-activity soil excavated as part of an ongoing remediation project. The soil below a hot cell in our customer's facility has been contaminated with high concentrations of radionuclides {sup 137}Cs and {sup 90}Sr over the past several decades. The contaminated soil is to be remotely excavated from beneath the hot cell floor, to a depth of several feet, and placed in steel-walled waste bins for assay and disposition. The project requires measuring the {sup 137}Cs activity to a minimum detectable concentration (MDC) of 1 micro curie per gram. The high dose-rate of the material and the expectation of high Bremsstrahlung background, due to an unknown ratio of {sup 90}Sr admixture with the {sup 137}Cs, present unique measurement challenges. A novel assay system was designed to make measurements through a small access port in a 4-foot thick concrete wall isolating operators from the high-dose excavation area. Waste bins filled with soil are placed by a remotely operated crane onto an automated turntable, and initial dose measurements are taken for all bins. When excavation has proceeded to the point that dose rates below 20 Rad/hr on contact are reached, gamma spectroscopy will be used to characterize the {sup 137}Cs content. Gamma assay is performed with a 1 cm{sup 3} CZT detector in a collimated tungsten shield, which is extended through the access port toward the side of the bin by means of a seven foot long aluminum pipe. Each of the four sides of the bin is assayed in a discrete measurement, and the individual segments and summed result are reported. Canberra's NDA2000 software is used to collect and analyze the spectroscopic data and to control the turntable movement during the assay. The system is expected to meet the required MDC limits within a forty minute assay time under the most adverse conditions anticipated, with total measurement uncertainty of less than 25%. We describe in this paper the design and construction of the assay system, its calibration using the ISOCS software, and the evaluation of performance estimates. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nature and Formation Mechanism of γ-Induced Color Centers with Optical Absorption Band 665 nm in KS-4V and KI Quartz Glasses

The aim of the experiment was to elucidate the formation mechanism of color centers with optical absorption band in the region 660–680 nm, which are induced in KS-4V and KI quartz glasses under irradiation by {sup 60}Co γ-rays at dose rate 2.5 Gy/sec and temperature 77, 273, and 310 K in the dose range 30–10{sup 5} Gy. The 665 nm band is induced efficiently in KI samples, which contain more metallic impurities (<10 ppm). It is shown that the 665 nm band induced in KS-4V after soaking at 300 K for 40 min diminishes by approximately 30% and almost vanishes after 3 h; it is thermally stable at <300 K and is completely annealed at ≥323 K. The accumulation kinetics of color centers of the 665 nm band in KS-4V at >4·10{sup 2} Gy is caused by rupture of the M{sup +}O–Si≡ bond near aluminum ≡Al{sup 3+}. In contrast to KS-4 and KI glasses, KU-1 glass is recommended for small windows in the ITR reactor for the visible part of the spectrum.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The influence of pairing correlations on the isospin symmetry breaking corrections of superallowed Fermi beta decays

Within the framework of quasi-particle random phase approximation, the isospin breaking correction of superallowed 0{sup +} {yields} 0{sup +} beta decay and unitarity of Cabibbo-Kobayashi-Maskawa mixing matrix have been investigated. The broken isotopic symmetry of nuclear part of Hamiltonian has been restored by Pyatov's method. The isospin symmetry breaking correction with pairing correlations has been compared with the previous results without pairing. The effect of pairing interactions has been examined for nine superallowed Fermi beta decays; their parent nuclei are {sup 26}Al, {sup 34}Cl, {sup 38}K, {sup 42}Sc, {sup 46}V, {sup 50}Mn, {sup 54}Co, {sup 62}Ga, {sup 74}Rb.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MCNP Simulations of Material Exposure Experiments (U)

Simulations of proposed material exposure experiments were performed using MCNP6. The experiments will expose ampules containing different materials of interest with radiation to observe the chemical breakdown of the materials. Simulations were performed to map out dose in materials as a function of distance from the source, dose variation between materials, dose variation due to ampule orientation, and dose variation due to different source energy. This write up is an overview of the simulations and will provide guidance on how to use the data in the spreadsheet.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Synthesis and structural characterization of the type-I clathrates K 8 Al x Sn 46–x and Rb 8 Al x Sn 46–x (x $≃$ 6.4–9.7)

In this work, exploratory studies in the systems A–Al–Sn (A = K and Rb) yielded the clathrates K 8 Al x Sn 46–x (potassium aluminium stannide) and Rb 8 Al x Sn 46–x (rubidium aluminium stannide), both with the cubic type-I structure (space group Pm 3 ¯<!-- ¯ --> n, No. 223; a ≃ 12.0 Å). The Al:Sn ratio is close to the idealized A 8 Al 8 Sn 38 com­position and it is shown that it can be varied slightly, in the range of ca ± 1.5, depending on the experimental conditions. Both the (Sn,Al) 20 and the (Sn,Al) 24 cages in the structure are fully occupied by the guest alkali metal atoms, i.e. K or Rb. The A 8 Al 8 Sn 38 formula has a valence electron count that obeys the valence rules and represents an intrinsic semiconductor, while the experimentally determined com­positions 8 Al 8±x Sn 38∓x suggest the synthesized materials to be nearly charge-balanced Zintl phases, i.e. they are likely to behave as heavily doped p - or n -type semiconductors.

36 MATERIALS SCIENCE↗

Determination of grain boundary mobility during recrystallization by statistical evaluation of electron backscatter diffraction measurements

One of the key aspects influencing microstructural design pathways in metallic systems is grain boundary motion. The present work introduces a method by means of which direct measurement of grain boundary mobility vs. misorientation dependence is made possible. The technique utilizes datasets acquired by means of serial electron backscatter diffraction (EBSD) measurements. The experimental EBSD measurements are collectively analyzed, whereby datasets were used to obtain grain boundary mobility and grain aspect ratio with respect to grain boundary misorientation. The proposed method is further validated using cellular automata (CA) simulations. Single crystal aluminium was cold rolled and scratched in order to nucleate random orientations. Subsequent annealing at 300 °C resulted in grains growing, in the direction normal to the scratch, into a single deformed orientation. Growth selection was observed, wherein the boundaries with misorientations close to Σ7 CSL orientation relationship (38° 〈111〉) migrated considerably faster. The obtained boundary mobility distribution exhibited a non-monotonic behavior with a maximum corresponding to misorientation of 38° ± 2° about 〈111〉 axes ± 4°, which was 10–100 times higher than the mobility values of random high angle boundaries. Correlation with the grain aspect ratio values indicated a strong growth anisotropy displayed by the fast growing grains. The observations have been discussed in terms of the influence of grain boundary character on grain boundary motion during recrystallization. - Highlights: • Statistical microstructure method to measure grain boundary mobility during recrystallization • Method implementation independent of material or crystal structure • Mobility of the Σ7 boundaries in 5N Al was calculated as 4.7 × 10{sup –8} m{sup 4}/J ⋅ s. • Pronounced growth selection in the recrystallizing nuclei in Al • Boundary mobility values during recrystallization 2–3 orders of magnitude larger vis-à-vis curvature driven motion.

36 MATERIALS SCIENCE↗

Note: Inhibiting bottleneck corrosion in electrical calcium tests for ultra-barrier measurements

A major failure mechanism is identified in electrical calcium corrosion tests for quality assessment of high-end application moisture barriers. Accelerated calcium corrosion is found at the calcium/electrode junction, leading to an electrical bottleneck. This causes test failure not related to overall calcium loss. The likely cause is a difference in electrochemical potential between the aluminum electrodes and the calcium sensor, resulting in a corrosion element. As a solution, a thin, full-area copper layer is introduced below the calcium, shifting the corrosion element to the calcium/copper junction and inhibiting bottleneck degradation. Using the copper layer improves the level of sensitivity for the water vapor transmission rate (WVTR) by over one order of magnitude. Thin-film encapsulated samples with 20 nm of atomic layer deposited alumina barriers this way exhibit WVTRs of 6 × 10{sup −5} g(H{sub 2}O)/m{sup 2}/d at 38 °C, 90% relative humidity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers by hydrothermal route: Luminescence properties

Highlights: ► Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized via a hydrothermal route and thermal decomposition. ► The length and diameter of Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were about 3–9 μm and 300 nm, respectively. ► Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm when excited at 400 nm. ► It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} is optimum. ► Critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. -- Abstract: Uniform Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers were synthesized by using a hydrothermal route and thermal decomposition of a precursor of Cr{sup 3+} doped ammonium aluminum hydroxide carbonate (denoted as AAHC), and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL) spectra and decay curves. XRD indicated that Cr{sup 3+} doped samples calcined at 1473 K were the most of α-Al{sub 2}O{sub 3} phase. SEM showed that the length and diameter of these Cr{sup 3+} doped alumina microfibers were about 3–9 μm and 300 nm, respectively. PL spectra showed that the Al{sub 2}O{sub 3}:Cr{sup 3+} microfibers presented a broad R band at 696 nm. It is shown that the 0.07 mol% of doping concentration of Cr{sup 3+} ions in α-Al{sub 2}O{sub 3}:Cr{sup 3+} was optimum. According to Dexter's theory, the critical distance between Cr{sup 3+} ions for energy transfer was determined to be 38 Å. It is found that the curve followed the single-exponential decay.

36 MATERIALS SCIENCE↗

A contribution to spectroscopic diagnostics and cathode sheath modeling of micro-hollow gas discharge in argon

In this paper, the hydrogen Balmer beta line shape from a micro-hollow gas discharge (MHGD) in argon with traces of hydrogen is used for simultaneous diagnostics of plasma and cathode sheath (CS) parameters. For this purpose, a simple model of relevant processes responsible for the line broadening is introduced and applied to the Balmer beta profile recorded from a MHGD generated in the microhole (diameter 100 {mu}m at narrow side and 130 {mu}m at wider side) of a gold-alumina-gold sandwich in the pressure range (100-900 mbar). The electron number density N{sub e} in the range (0.4-4.5) x 10{sup 20} m{sup -3} is determined from the width of the central part of the Balmer beta line profile, while, from the extended wings of the Balmer beta profile, induced by dc Stark effect, the next three parameters are determined: the average value E{sub a} of electric field strength in the CS in the range (16-95 kV/cm), the electric field strength E{sub 0} at the cathode surface in the range (32-190 kV/cm), and the CS thickness z{sub g} in the range (18-70 {mu}m). All four MHGD parameters, N{sub e}, E{sub a}, E{sub 0}, and z{sub g}, compare reasonably well with results of the modeling experiment by M. J. Kushner [J. Phys. D: Appl. Phys. 38, 1633 (2005)]. The results for N{sub e} are compared with other emission experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Aerosol-Assisted Solid Debris Collection for the National Ignition Facility

The National Ignition Facility (NIF) has been completed and has made its first shots on-target. While upcoming experiments will be focused on achieving ignition, a variety of subsequent experiments are planned for the facility, including measurement of cross sections, astrophysical measurements, and investigation of hydrodynamic instability in the target capsule. In order to successfully execute several of these planned experiments, the ability to collect solid debris following a NIF capsule shot will be required. The ability to collect and analyze solid debris generated in a shot at the National Ignition Facility (NIF) will greatly expand the number of nuclear reactions studied for diagnostic purposes. Currently, reactions are limited to only those producing noble gases for cryogenic collection and counting with the Radchem Apparatus for Gas Sampling (RAGS). The radchem solid collection diagnostic has already been identified by NIF to be valuable for the determination and understanding of mix generated in the target capsule's ablation. LLNL is currently developing this solid debris collection capability at NIF, and is in the stage of testing credible designs. Some of these designs explore the use of x-ray generated aerosols to assist in collection of solid debris. However, the variety of harsh experimental conditions this solid collection device will encounter in NIF are challenging to replicate. Experiments performed by Gary Grim et al. at Sandia National Laboratory's RHEPP1 facility have shown that ablation causes a cloud of material removed from an exposed surface to move normal to and away from the surface. This ablation is certain to be a concern in the NIF target chamber from the prompt x-rays, gamma rays, etc. generated in the shot. The cloud of ablated material could interfere with the collection of the desired reaction debris by slowing down the debris so that the kinetic energy is too low to allow implantation, or by stopping the debris from reaching the collection device entirely. Our goal is to use this primary ablation wave to our advantage, by the creation of ionized alkali metal halide salt aerosols. This technique is similar to that used by many particle accelerator groups for gas-jet transport. Ideally the salt would be ablated from a substrate, encounter the reaction debris, agglomerate, and be collected for further study. We have done studies at laser and pulsed-power facilities (Titan laser at LLNL, Trident laser at LANL, Zebra z-pinch at Nevada Terawatt Facility) evaluating the hardiness of materials for placement in the NIF target chamber, as well as testing aerosol generation by the incident x-rays generated in device shots. To test this method's potential success in the NIF environment, we have tested KCl, KI, RbI, and CsI films of 1 and 2 um linear thickness on aluminum and silicon wafer substrates in these aforementioned facilities, at varied distances. These salts do ablate in the presence of sufficient x-ray fluence. Further analysis to quantify the final ablation depth as a function of x-ray fluence is ongoing. Half of each sample was masked with a thick tungsten foil for photon opacity. KCl was the most difficult salt to ablate, from comparing the tungsten-masked side of the samples to the unmasked side of the samples. This is likely due to KCl's absorbance peak being at lower wavelengths than that of KI, {approx}160 nm vs. {approx}220 nm, respectively. Samples with and without collimation were tested to identify if any condensation of these ablated salts occurred after ablation. Visual inspection of the silicon wafer witness plates placed parallel to the direction of the incident photons showed that a vapor was deposited on the wafers next to the collimators. Further analysis with EDS in the case of the collimated samples conclusively identified the vapor as CsI. We also intend to examine samples of bare substrate exposed to the same experimental conditions for post-shot change via SEM images, optical microscopy, and atomic force microscopy (AFM). Furthermore, tests with separated isotopes may be done to reduce background contamination. When sample optimization is complete, we plan to develop a 'catcher' device for these desorbed aerosols. Current ideas include biased grids to either attract the ionized particles to the grid, or repel them towards a collection device.

36 MATERIALS SCIENCE↗

Spatial atomic layer deposition: Performance of low temperature H{sub 2}O and O{sub 3} oxidant chemistry for flexible electronics encapsulation

Water and oxygen were compared as oxidizing agents for the Al{sub 2}O{sub 3} atomic layer deposition process using spatial atomic layer deposition reactor. The influence of the precursor dose on the deposition rate and refractive index, which was used as a proxy for film density, was measured as a function of residence time, defined as the time which the moving substrate spent within one precursor gas zone. The effect of temperature on the growth characteristics was also measured. The water-based process gave faster deposition rates and higher refractive indices but the ozone process allowed deposition to take place at lower temperatures while still maintaining good film quality. In general, processes based on both oxidation chemistries were able to produce excellent moisture barrier films with water vapor transmission rate levels of 10{sup −4} g/m{sup 2} day measured at 38 °C and 90% of relative humidity on polyethylene naphthalate substrates. However, the best result of <5 × 10{sup −5} was obtained at 100 °C process temperature with water as precursor.

36 MATERIALS SCIENCE↗

NUMERICAL SIMULATIONS OF SUPERNOVA DUST DESTRUCTION. I. CLOUD-CRUSHING AND POST-PROCESSED GRAIN SPUTTERING

We investigate through hydrodynamic simulations the destruction of newly formed dust grains by sputtering in the reverse shocks of supernova (SN) remnants. Using an idealized setup of a planar shock impacting a dense, spherical clump, we implant a population of Lagrangian particles into the clump to represent a distribution of dust grains in size and composition. We then post-process the simulation output to calculate the grain sputtering for a variety of species and size distributions. We explore the parameter space appropriate for this problem by altering the overdensity of the ejecta clumps and the speed of the reverse shocks. Since radiative cooling could lower the temperature of the medium in which the dust is embedded and potentially protect the dust by slowing or halting grain sputtering, we study the effects of different cooling methods over the timescale of the simulations. In general, our results indicate that grains with radii less than 0.1 {mu}m are sputtered to much smaller radii and often destroyed completely, while larger grains survive their interaction with the reverse shock. We also find that, for high ejecta densities, the percentage of dust that survives is strongly dependent on the relative velocity between the clump and the reverse shock, causing up to 50% more destruction for the highest velocity shocks. The fraction of dust destroyed varies widely across grain species, ranging from total destruction of Al{sub 2}O{sub 3} grains to minimal destruction of Fe grains (only 20% destruction in the most extreme cases). C and SiO{sub 2} grains show moderate to strong sputtering as well, with 38% and 80% mass loss. The survival rate of grains formed by early SNe is crucial in determining whether or not they can act as the 'dust factories' needed to explain high-redshift dust.

79 ASTRONOMY AND ASTROPHYSICS↗

Toward detection of AlCH{sub 2} and AlCH{sub 2}{sup +} in the interstellar medium

Highly reliable molecular properties have been computed for AlCH{sub 2} and AlCH{sub 2}{sup +} at the CCSD(T)/cc-pwCVQZ level of theory. These simple aluminum species are relevant to the chemistry of the interstellar medium (ISM) and circumstellar medium, and are proposed to form in regions where aluminum and methylene exist in appreciable concentrations because AlCH{sub 2} and AlCH{sub 2}{sup +} are thermodynamically stable with respect to dissociation. Herein, dissociation energies were computed for both species through extrapolation to the complete basis set limit using focal point analysis. For the neutral species, 86 kcal mol{sup –1} is required to heterolytically cleave the Al-C single bond, while the cationic species requires 38 kcal mol{sup –1}. To aid in identification within the ISM, the anharmonic (fundamental) frequencies, spectroscopic constants, and vibrationally averaged properties for AlCH{sub 2} and the corresponding cation are also reported.

79 ASTRONOMY AND ASTROPHYSICS↗

Stability of cenospheres in lightweight cement composites in terms of alkali-silica reaction

This paper presents an experimental study on characteristics and stability of cenospheres used in lightweight cement composites. ASTM C227 and C1260 tests were used to evaluate if cenospheres are potentially deleterious due to alkali-silica reaction (ASR). Natural sand was used as control. Examination by scanning electron microscope with energy-dispersive X-ray spectroscopy and analyses by X-ray diffractometer and thermogravimetry were conducted on samples with cenospheres after 9-month C227 and C1260 tests to better understand the behavior of cenospheres exposed to high alkaline environments and higher temperatures in these tests. Results indicate that cenospheres are not potentially deleterious due to ASR. Expansion of the mortar specimens tested to ASTM C227 and C1260 seems to be affected by the pozzolanic reactivity of cenospheres. Fine cenospheres showed limited pozzolanic reactivity at 28-30 Degree-Sign C and 38 Degree-Sign C, but exhibited significant pozzolanic reactivity at 80 Degree-Sign C with aluminum tobermorite [Ca{sub 5}Si{sub 5}Al(OH)O{sub 17} Bullet-Operator 5H{sub 2}O] identified as the main reaction product.

36 MATERIALS SCIENCE↗

Generation, transmission, and detection of terahertz photons on an electrically driven single chip

We demonstrate single photon counting of terahertz (THz) waves transmitted from a local THz point source through a coplanar two-wire waveguide on a GaAs/AlGaAs single heterostructure crystal. In the electrically driven all-in-one chip, quantum Hall edge transport is used to achieve a noiseless injection current for a monochromatic point source of THz fields. The local THz fields are coupled to a coplanar two-wire metal waveguide and transmitted over a macroscopic scale greater than the wavelength (38 μm in GaAs). THz waves propagating on the waveguide are counted as individual photons by a quantum-dot single-electron transistor on the same chip. Photon counting on integrated high-frequency circuits will open the possibilities for on-chip quantum optical experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗