Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALUMINIUM 27”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Evidence of a Proton Halo in {sup 23}Al: A Mean Field Analysis

The structural properties of Al isotopes are analysed using the relativistic mean field formalism with NL3 parameter set. The Glauber model technique is implemented to study the reaction dynamics for {sup 23−28}Al taking {sup 12}C as the target. The enhanced reaction cross section, high value of radius, narrow longitudinal momentum distribution and small proton separation energy of {sup 23}Al favours a proton halo structure for this nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2013

Elastic scattering measurements for {sup 7}Be+{sup 27}Al system at RIBRAS facility

Elastic scattering angular distribution measurements of {sup 7}Be+{sup 27}Al system were performed at the laboratory energy of 15.6 MeV. The {sup 7}Be secondary beam was produced by the proton transfer reaction {sup 3}He({sup 6}Li,{sup 7}Be) and impinged on {sup 27}Al and {sup 197}Au targets, using the Radioactive Ion Beam (RIB) facility, RIBRAS. The elastic angular distribution was obtained within the angular range of 15{sup 0} - 80{sup 0} at the center of mass frame. Optical model calculations have been performed using the Woods- Saxon form factors and the Sao Paulo potential to fit the experimental data. The total reaction cross section was derived.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Visualizing expanding warm dense matter heated by laser-generated ion beams

This PowerPoint presentation concluded with the following. We calculated the expected heating per atom and temperatures of various target materials using a Monte Carlo simulation code and SESAME EOS tables. We used aluminum ion beams to heat gold and diamond uniformly and isochorically. A streak camera imaged the expansion of warm dense gold (5.5 eV) and diamond (1.7 eV). GXI-X recorded all 16 x-ray images of the unheated gold bar targets proving that it could image the motion of the gold/diamond interface of the proposed target.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Carbonation of C–S–H and C–A–S–H samples studied by {sup 13}C, {sup 27}Al and {sup 29}Si MAS NMR spectroscopy

Synthesized calcium silicate hydrate (C–S–H) samples with Ca/Si ratios of 0.66, 1.0, and 1.5 have been exposed to atmospheric CO{sub 2} at room temperature and high relative humidity and studied after one to 12 weeks. {sup 29}Si NMR reveals that the decomposition of C–S–H caused by carbonation involves two steps and that the decomposition rate decreases with increasing Ca/Si ratio. The first step is a gradual decalcification of the C–S–H where calcium is removed from the interlayer and defect sites in the silicate chains until Ca/Si = 0.67 is reached, ideally corresponding to infinite silicate chains. In the seconds step, calcium from the principal layers is consumed, resulting in the final decomposition of the C–S–H and the formation of an amorphous silica phase composed of Q{sup 3} and Q{sup 4} silicate tetrahedra. The amount of solid carbonates and of carbonate ions in a hydrous environment increases with increasing Ca/Si ratio for the C–S–H, as shown by {sup 13}C NMR. For C–A–S–H samples with Ca/Si = 1.0 and 1.5, {sup 27}Al NMR demonstrates that all aluminium sites associated with the C–S–H are consumed during the carbonation reactions and incorporated mainly as tetrahedral Al(–OSi){sub 4} units in the amorphous silica phase. A small amount of penta-coordinated Al sites has also been identified in the silica phase.

36 MATERIALS SCIENCE↗
DOE OSTI2011

Nuclear Data Sheets for A = 27

Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for {sup 27}F, {sup 27}Ne, {sup 27}Na, {sup 27}Mg, {sup 27}Al, {sup 27}Si, {sup 27}P, and {sup 27}S. This evaluation for A=27 supersedes the earlier evaluation by P.M. Endt (1998En04 and 1990En08).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Population transfer HMQC for half-integer quadrupolar nuclei

This work presents a detailed analysis of a recently proposed nuclear magnetic resonance method [Wang et al., Chem. Commun. 49(59), 6653-6655 (2013)] for accelerating heteronuclear coherence transfers involving half-integer spin quadrupolar nuclei by manipulating their satellite transitions. This method, called Population Transfer Heteronuclear Multiple Quantum Correlation (PT-HMQC), is investigated in details by combining theoretical analyses, numerical simulations, and experimental investigations. We find that compared to instant inversion or instant saturation, continuous saturation is the most practical strategy to accelerate coherence transfers on half-integer quadrupolar nuclei. We further demonstrate that this strategy is efficient to enhance the sensitivity of J-mediated heteronuclear correlation experiments between two half-integer quadrupolar isotopes (e.g., {sup 27}Al-{sup 17}O). In this case, the build-up is strongly affected by relaxation for small T{sub 2}′ and J coupling values, and shortening the mixing time makes a huge signal enhancement. Moreover, this concept of population transfer can also be applied to dipolar-mediated HMQC experiments. Indeed, on the AlPO{sub 4}-14 sample, one still observes experimentally a 2-fold shortening of the optimum mixing time albeit with no significant signal gain in the {sup 31}P-({sup 27}Al) experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Identification of analog states in the T=1/2 A=27 mirror system from low excitation energies to the region of hydrogen burning in the {sup 26}Al{sup g,m}(p,{gamma}){sup 27}Si reactions

The reactions {sup 26}Al{sup g}(p, {gamma}){sup 27}Si and {sup 26}Al{sup m}(p, {gamma}){sup 27}Si are important for influencing the galactic abundance of the cosmic {gamma}-ray emitter {sup 26}Al{sup g} and for the excess abundance of {sup 26}Mg found in presolar grains, respectively. Precise excitation energies and spin assignments of states from the ground state to the region of astrophysical interest in {sup 27}Si, including the identification and pairing of key astrophysical resonances with analog states in the mirror nucleus {sup 27}Al, are reported using {gamma} rays observed in the {sup 12}C + {sup 16}O fusion reaction. The detailed evolution of Coulomb energy differences between the states in {sup 27}Si and {sup 27}Al is explored, including the region above the astrophysical reaction thresholds.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2014

Calcination products of gibbsite studied by X-ray diffraction, XPS and solid-state NMR

The changes caused by heat treatment of gibbsite powder at 300–1473 K were studied using the X-ray diffraction (XRD), X-ray photoemission (XPS) spectra and {sup 27}Al magic angle spinning nuclear magnetic resonance spectroscopy ({sup 27}Al MAS NMR). XRD analysis indicates that the transformation sequence involves the formation of κ-Al{sub 2}O{sub 3} as an intermediate phase between χ- and α-Al{sub 2}O{sub 3}. The crystallite size of χ-Al{sub 2}O{sub 3} is as small as 10 nm. XPS analysis indicates that the ratio of aluminium atoms to oxygen atoms in χ-Al{sub 2}O{sub 3} and κ-Al{sub 2}O{sub 3} increases, whereas the expected ratio is observed in α-Al{sub 2}O{sub 3}. The percentage of AlO{sub 4} units in the transition aluminas follows the same behaviour as the ratio of Al/O. - Graphical abstract: The percentage of AlO{sub 4} units in transition aluminas follows the same behaviour as the ratio of Al/O. - Highlights: • Calcination products of gibbsite studied by XRD, XPS and solid-state NMR. • The crystallite size of χ-Al{sub 2}O{sub 3} is as small as 10 nm. • The Al/O atomic ratio determined by XPS is larger than 2/3 in χ-Al{sub 2}O{sub 3} and κ-Al{sub 2}O{sub 3}. • The percentage of AlO{sub 4} in the aluminas follows the same behaviour as the Al/O atomic ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag

Magnesium potassium phosphate cements (MKPCs), blended with 50 wt.% fly ash (FA) or ground granulated blast furnace slag (GBFS) to reduce heat evolution, water demand and cost, were assessed using compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) spectroscopy on {sup 25}Mg, {sup 27}Al, {sup 29}Si, {sup 31}P and {sup 39}K nuclei. We present the first definitive evidence that dissolution of the glassy aluminosilicate phases of both FA and GBFS occurred under the pH conditions of MKPC. In addition to the main binder phase, struvite-K, an amorphous orthophosphate phase was detected in FA/MKPC and GBFS/MKPC systems. It was postulated that an aluminium phosphate phase was formed, however, no significant Al–O–P interactions were identified. High-field NMR analysis of the GBFS/MKPC system indicated the potential formation of a potassium-aluminosilicate phase. This study demonstrates the need for further research on these binders, as both FA and GBFS are generally regarded as inert fillers within MKPC.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Mesoporous silica materials modified with alumina polycations as catalysts for the synthesis of dimethyl ether from methanol

Highlights: • Deposition of alumina ologoctaions on mesoporous silicas modified with surface −SO{sub 3}H groups. • Alumina aggregates generated acid properties in the silica supports. • Alumina modified SBA-15 and MCF were active and selective catalysts in DME synthesis. - Abstract: Mesoporous silica materials (SBA-15 and MCF) were used as catalytic supports for the deposition of aggregated alumina species using the method consisting of the following steps: (i) anchoring 3-(mercaptopropyl)trimethoxysilane (MPTMS) on the silica surface followed by (ii) oxidation of −SH to−SO{sub 3}H groups and then (iii) deposition of aluminum Keggin oligocations by ion-exchange method and (iv) calcination. The obtained samples were tested as catalysts for synthesis of dimethyl ether from methanol. The modified silicas were characterized with respect to the ordering of their porous structure (XRD), textural properties (BET), chemical composition (EDS, CHNS), structure ({sup 27}Al NMR, FTIR) and location of alumina species (EDX-TEM), surface acidity (NH{sub 3}-TPD, Py-FTIR) and thermal stability (TGA). The obtained materials were found to be active and selective catalysts for methanol dehydration to dimethyl ether (DME) in the MTD process (methanol-to-dimethyl ether).

36 MATERIALS SCIENCE↗
DOE OSTI2011

Counting the number of correlated pairs in a nucleus

We suggest that the number of correlated nucleon pairs in an arbitrary nucleus can be estimated by counting the number of proton-neutron, proton-proton, and neutron-neutron pairs residing in a relative S state. We present numerical calculations of those amounts for the nuclei {sup 4}He, {sup 9}Be, {sup 12}C, {sup 27}Al, {sup 40}Ca, {sup 48}Ca, {sup 56}Fe, {sup 63}Cu, {sup 108}Ag, and {sup 197}Au. The results are used to predict the values of the ratios of the per-nucleon electron-nucleus inelastic scattering cross section to the deuteron in the kinematic regime where correlations dominate.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Mechanochemical synthesis of low-fluorine doped aluminum hydroxide fluorides

Different aluminum hydroxide fluorides with varying Al/F molar ratios from 1:1.5 up to 1:0.05 were successfully synthesized by mechanochemical reactions. The characterization of the products by XRD, {sup 27}Al and {sup 19}F MAS NMR, thermal analysis, nitrogen adsorption and zeta potential techniques allows a detailed understanding of the structure and surface properties of the products. Using γ-Al(OH){sub 3} and β-AlF{sub 3}·3H{sub 2}O as OH- and F-sources, respectively, strongly disordered products were obtained with an Al: F molar ratio higher than 1:0.25. The fluorination degree has affected the amount of 4- and 5-fold coordinated Al sites, not present in the reactants. An evolution of the sub-coordinated Al-species has been detected also as a consequence of annealing processes. Obviously, these species affect the phase transition to alumina, by decreasing the transition temperature of the formation of α-Al{sub 2}O{sub 3}. Synthesis conditions (milling time, fluorination degree) play a crucial role for the product composition. - Graphical abstract: The impact of the combined action of the milling and the different fluorine doping on the structure of new aluminum hydroxide fluorides was followed by {sup 27}Al and {sup 19}F NMR and by other complementary techniques. - Highlights: • Low F-doped Al-hydroxide fluorides can be successfully prepared by mechanosynthesis. • Both F-doping and mechanochemical synthesis introduce a high number of defects in the structure. • The fluorination degree affects the amount of 4- and 5-fold coordinated Al sites as well as the transition temperature to corundum.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Control of the properties of catalysts for methane aromatization by synthesizing ZSM-5 zeolites with different crystallite sizes

MFI zeolite materials (ZSM-5) with crystal sizes in the range from 0.10 to 1.70 μm have been synthesized. Acidic and surface properties, phase and morphological composition of the prepared zeolites have been studied by the IR sprectroscopy, nitrogen porosimetry, XRD, and scanning electron microscopy. Increasing crystal size was shown to decrease the general acidity of the zeolite. Synthesized zeolites served as supports for molybden-containing catalysts for methane aromatization prepared by using the solid phase synthesis approach. Diffuse reflectance IR spectroscopy, thermoprogrammed desoption of ammonia and {sup 27}Al NMR spectroscopy were used to characterize the physicochemical properties of the catalysts. An increase in the crystallite size of the zeolite favors a decrease in the acidity of the catalysts and inhibits the formation of alumina molybdate during the catalyst preparation. As a result, a tendency to coke formation is suppressed and the performance of the catalysts in methane aromatization improved: methane conversion and aromatic hydrocarbon yield increase.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2012

Alkaline solution/binder ratio as a determining factor in the alkaline activation of aluminosilicates

This study investigates the effect of the alkaline solution/binder (S/B) ratio on the composition and nanostructure of the reaction products generated in the alkaline activation of aluminosilicates. The experiments used two mixtures of fly ash and dehydroxylated white clay and for each of these, varying proportions of the solution components. The alkali activator was an 8 M NaOH solution (with and without sodium silicate) used at three S/B ratios: 0.50, 0.75 and 1.25. The {sup 29}Si, {sup 27}Al MAS NMR and XRD characterisation of the reaction products reveal that for ratios nearest the value delivering suitable paste workability, the reaction-product composition and structure depend primarily on the nature and composition of the starting materials and the alkaline activator used. However, when an excess alkaline activator is present in the system, the reaction products tend to exhibit SiO{sub 2}/Al{sub 2}O{sub 3} ratios of approximately 1, irrespective of the composition of the starting binder or the alkaline activator.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Role of annealing temperature on cation ordering in hydrothermally prepared zinc aluminate (ZnAl2O4) spinel

Highlights: • Investigation of the structural anomaly in Zinc Aluminate Spinel/ZAS (ZnAl{sub 2}O{sub 4}) by chemically inducing the defects by annealing temperature and synthetic pressure. • Hydrothermal synthesis of ZnAl{sub 2}O{sub 4} at 240 °C from nitrate precursors. • Study of the role of annealing temperature (300–900 °C) in tuning cation ordering. • Rietveld analysis of powder X-ray diffraction patterns and Raman spectroscopy to showcase disorder-order transition in ZnAl{sub 2}O{sub 4} spinels. - Abstract: Spinels (AB{sub 2}O{sub 4}) form a niche class of ceramics, which is rich in structural (dis)ordering due to the inherent mixing between the constituent tetrahedral and octahedral sites. The cations (A and B) can form antisite defects under the influence of external parameters like pressure, temperature and nuclear irradiation. The current study reports the formation and evolution of disorder-order structural transition in hydrothermally prepared zinc aluminate spinel ZnAl{sub 2}O{sub 4}. The effect of final calcination temperature (300–900 °C for 9 h) on the degree of cation ordering has been investigated with powder X-ray diffraction, Raman and {sup 27}Al solid-state NMR spectroscopy. Rietveld refinement revealed a gradual disorder to order structural transition accompanied by lower inversion parameter (i{sub s}) and smaller lattice parameter (a) with higher calcination temperature. It was further affirmed by Raman analysis and solid-state NMR spectroscopy probing the ZnO{sub 4} and AlO{sub 4} tetrahedra in spinel. Independent of the degree of cation ordering, nanometric particle size with high surface area was observed in ZnAl{sub 2}O{sub 4} spinel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Structural transitions in alumina nanoparticles by heat treatment

γ-alumina nanoparticles were annealed sequentially at 800°C, 950°C and 1100°C and structural transitions as a function of heat treatment were studied by X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC) and {sup 27}Al Magic Angle Spinning Nuclear Magnetic Resonance (MAS-NMR) methods.. XRD studies found that γ-Al{sub 2}O{sub 3} is stable upto a temperature of at least 950°C and transforms to the thermodynamically stable α-phase after annealing at 1100°C. MAS-NMR revealed that γ-alumina contains AlO{sub 4} and AlO{sub 6} structural units in the ratio 1: 2, while α-phase contains only AlO{sub 6} units. DSC confirmed that γ → α transition initiates at 1060°C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2015

Form factors for dark matter capture by the Sun in effective theories

In the effective theory of isoscalar and isovector dark matter-nucleon interactions mediated by a heavy spin-1 or spin-0 particle, 8 isotope-dependent nuclear response functions can be generated in the dark matter scattering by nuclei. We compute the 8 nuclear response functions for the 16 most abundant elements in the Sun, i.e. H, {sup 3}He, {sup 4}He, {sup 12}C, {sup 14}N, {sup 16}O, {sup 20}Ne, {sup 23}Na, {sup 24}Mg, {sup 27}Al, {sup 28}Si, {sup 32}S, {sup 40}Ar, {sup 40}Ca, {sup 56}Fe, and {sup 59}Ni, through numerical shell model calculations. We use our response functions to compute the rate of dark matter capture by the Sun for all isoscalar and isovector dark matter-nucleon effective interactions, including several operators previously considered for dark matter direct detection only. We study in detail the dependence of the capture rate on specific dark matter-nucleon interaction operators, and on the different elements in the Sun. We find that a so far neglected momentum dependent dark matter coupling to the nuclear vector charge gives a larger contribution to the capture rate than the constant spin-dependent interaction commonly included in dark matter searches at neutrino telescopes. Our investigation lays the foundations for model independent analyses of dark matter induced neutrino signals from the Sun. The nuclear response functions obtained in this study are listed in analytic form in an appendix, ready to be used in other projects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗