Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALUMINIUM 25”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Evidence of a Proton Halo in {sup 23}Al: A Mean Field Analysis

The structural properties of Al isotopes are analysed using the relativistic mean field formalism with NL3 parameter set. The Glauber model technique is implemented to study the reaction dynamics for {sup 23−28}Al taking {sup 12}C as the target. The enhanced reaction cross section, high value of radius, narrow longitudinal momentum distribution and small proton separation energy of {sup 23}Al favours a proton halo structure for this nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-precision (p,t) reaction to determine {sup 25}Al(p,{gamma}){sup 26}Si reaction rates

Since the identification of ongoing {sup 26}Al production in the universe, the reaction sequence {sup 24}Mg(p,{gamma}){sup 25}Al({beta}{sup +{nu}}){sup 25}Mg(p,{gamma}){sup 26}Al has been studied intensively. At temperatures where the radiative capture on {sup 25}Al (t{sub 1/2}=7.2 s) becomes faster than the {beta}{sup +} decay, the production of {sup 26}Al can be reduced due to the depletion of {sup 25}Al. To determine the resonances relevant for the {sup 25}Al(p,{gamma}){sup 26}Si bypass reaction, we measured the {sup 28}Si(p,t){sup 26}Si reaction with high-energy precision using the Grand Raiden spectrometer at the Research Center for Nuclear Physics, Osaka. Several new energy levels were found above the p threshold and for known states excitation energies were determined with smaller uncertainties. The calculated stellar rates of the bypass reaction agree well with previous results, suggesting that these rates are well established.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-precision {sup 28}Si(p,t){sup 26}Si reaction to determine {sup 22}Mg({alpha},p){sup 25}Al reaction rates

The rise time of stellar x-ray bursts is a signature of thermonuclear runaway processes in the atmosphere of neutron stars and is highly sensitive to a series of ({alpha},p) reactions via high-lying resonances in sd-shell nuclei. Lacking data for the relevant resonance levels, the stellar reaction rates have been calculated using statistical, Hauser-Feshbach models, assuming a high-level density. This assumption may not be correct in view of the selectivity of the ({alpha},p) reaction to natural parity states. We measured the {sup 28}Si(p,t){sup 26}Si reaction with a high-resolution spectrometer to identify resonance levels in {sup 26}Si above the {alpha}-emission threshold at 9.164 MeV excitation energy. These resonance levels are used to calculate the stellar reaction rate of the {sup 22}Mg({alpha},p){sup 25}Al reaction and to test the validity of the statistical assumption.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New experimental study of low-energy (p,gamma) resonances in magnesium isotopes

Proton captures on Mg isotopes play an important role in the Mg-Al cycle active in stellar H-shell burning. In particular, the strengths of low-energy resonances with E<200 keV in {sup 25}Mg(p,gamma){sup 26}Al determine the production of {sup 26}Al and a precise knowledge of these nuclear data is highly desirable. Absolute measurements at such low energies are often very difficult and hampered by gamma-ray background as well as changing target stoichiometry during the measurements. The latter problem can be partly avoided using higher-energy resonances of the same reaction as a normalization reference. Hence the parameters of suitable resonances have to be studied with adequate precision. In the present work we report on new measurements of the resonance strengths omegagamma of the E=214, 304, and 326 keV resonances in the reactions {sup 24}Mg(p,gamma){sup 25}Al, {sup 25}Mg(p,gamma){sup 26}Al, and {sup 26}Mg(p,gamma){sup 27}Al, respectively. These studies were performed at the LUNA facility in the Gran Sasso underground laboratory using multiple experimental techniques and provided results with a higher accuracy than previously achieved.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of {sup 25}Al+p resonant elastic scattering for studying the {sup 25}Al(p,{gamma}){sup 26}Si

Proton resonant states in {sup 26}Si have been studied by the resonant elastic scattering of {sup 25}Al+p with a {sup 25}Al radioactive ion beam at 2.863 MeV/nucleon bombarding a thick H{sub 2} gas target with the inverse kinematics method at the low-energy RI beam facility CRIB (CNS Radioactive Ion Beam separator), University of Tokyo. The properties of these resonance states are important to better determine the production rates of {sup 25}Al(p,{gamma}){sup 26}Si reaction, which is one of the astrophysically important nuclear reactions to understand the production of the ground state of {sup 26}Al, the emitter of its characteristic 1.809-MeV gamma-ray, under the explosive stellar environments such as novae and X-ray bursts. In this work, several resonances above the proton threshold level have been observed with a high statistics and background free through a covered the range of excitation energies from E{sub x}{approx} 6.8 to 8.2 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Properties of {sup 26}Mg and {sup 26}Si in the sd shell model and the determination of the {sup 25}Al(p,{gamma}){sup 26}Si reaction rate

We present theoretical results for the {sup 25}Al(p,{gamma}){sup 26}Si resonance-capture rate. The isobaric mass multiplet equation is used to determine the energies and J{sup {pi}} values of states in {sup 26}Si based upon those observed in {sup 26}Mg and {sup 26}Al together with sd shell calculations for the c coefficients. Three Hamiltonians for the sd shell, USD, USDA and USDB, are used to estimate the theoretical uncertainties in the {gamma}-decay and proton-decay widths that go into the resonance-capture rate.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 25

This evaluation of A = 25 has been updated from previous evaluations published in 1998En04, 1990En08, and 1978En02. Coverage includes properties of adopted levels and {gamma} rays, decay-scheme data (energies, intensities and placement of radiations), and cross reference entries. The following tables continue the tradition of showing the systematic relationships between levels in A = 23. These assignments are based on spectroscopic factors and energy differences where {delta}E{sub x}=E{sub x}({sup 25}Al)-E{sub x}({sup 25}Mg)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of {sup 25}Al energy levels observed in the {sup 28}Si(p,{alpha}){sup 25}Al reaction

The level structure of {sup 25}Al has been studied at the ORNL Holifield Radioactive Ion Beam Facility by measuring the angular and energy distributions of {alpha} particles from the {sup 28}Si(p,{alpha}){sup 25}Al reaction. Proton beams ({approx}10 nA) at laboratory energies of 40 and 42 MeV were generated by the 25 MV tandem accelerator and bombarded a natural silicon target (50 {mu}g/cm{sup 2}). Seventeen levels were observed and spins for several were constrained through a distorted-wave Born approximation analysis of the angular distributions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Orientation features of {sup 24}Mg(2+) aligned nuclei in (p, p) and (d, d) reactions at E{sub x} ≈ 7.5 MeV per nucleon

Experimental angular dependences of cross sections for elastic and inelastic scattering and the result obtained by reconstructing the populations of magnetic sublevels, multipole-moment orientation tensors, and polarization tensors are presented for {sup 24}Mg (2{sup +}, 1.369 MeV) aligned nuclei produced in inelastic proton scattering at E{sub p} = 7.4 MeV. The experimental results in question are compared with the results of calculations based on the coupled-channel method and on the compound-nucleus model, the 3/2{sup +} resonance in the {sup 25}Al compound nucleus being taken into account. The orientation features of {sup 24}Mg (2{sup +}, 1.369 MeV) nuclei produced in inelastic proton and deuteron scattering on {sup 24}Mg at E{sub x} ≈ 7.5 MeV per nucleon are found to be generally similar despite a substantial difference in the respective differential cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The {sup 28}Si(p,t){sup 26}Si{sup *}(p) reaction and implications for the astrophysical {sup 25}Al(p,{gamma}){sup 26}Si reaction rate

Several resonances in {sup 25}Al(p,{gamma}){sup 26}Si have been studied via the {sup 28}Si(p,t){sup 26}Si reaction. Triton energies and angular distributions were measured using a segmented annular detector array. An additional silicon detector array was used to simultaneously detect the coincident protons emitted from the decay of states in {sup 26}Si above the proton threshold in order to determine branching ratios. A resonance at 5927{+-}4 keV has been experimentally confirmed as the first l=0 state above the proton threshold, with a proton branching ratio consistent with one.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Iron-based binary ferromagnets for transverse thermoelectric conversion

Thermoelectric generation using the anomalous Nernst effect (ANE) has great potential for application in energy harvesting technology because the transverse geometry of the Nernst effect should enable efficient, large-area and flexible coverage of a heat source. For such applications to be viable, substantial improvements will be necessary not only for their performance but also for the associated material costs, safety and stability. In terms of the electronic structure, the anomalous Nernst effect (ANE) originates from the Berry curvature of the conduction electrons near the Fermi energy. To design a large Berry curvature, several approaches have been considered using nodal points and lines in momentum space. Here we perform a high-throughput computational search and find that 25 percent doping of aluminium and gallium in alpha iron, a naturally abundant and low-cost element, dramatically enhances the ANE by a factor of more than ten, reaching about 4 and 6 microvolts per kelvin at room temperature, respectively, close to the highest value reported so far. The comparison between experiment and theory indicates that the Fermi energy tuning to the nodal web—a flat band structure made of interconnected nodal lines—is the key for the strong enhancement in the transverse thermoelectric coefficient, reaching a value of about 5 amperes per kelvin per metre with a logarithmic temperature dependence. We have also succeeded in fabricating thin films that exhibit a large ANE at zero field, which could be suitable for designing low-cost, flexible microelectronic thermoelectric generators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sodium-Beta Alumina Batteries: Status and Challenges

Sodium-beta alumina batteries, have been extensively developed for a few decades and encouraging progress has been achieved so far. The anode is typically molten sodium while the cathode can be molten sulfur (Na-S battery) or solid transition metal halides plus a liquid phase secondary electrolyte (e.g., ZEBRA battery). The electrolyte typically used is a β"-Al2O3 solid membrane. The issues prohibiting broad commercialization of this type of technology are dependent on the materials used, but can be broadly described as relatively high cost, safety (particularly for the Na-S couple), and low power. This paper offers a review on materials and designs for the batteries and discusses the challenges ahead for further technology improvement.

25 ENERGY STORAGE↗

The Impact of Aluminum and Iron Substitution on the Structure and Electrochemistry of Li[Ni0.4Co0.2-yMyMn0.4]O2 Materials

Li[Ni0.4Co0.2-yMyMn0.4]O2 (0<_y<_0.2) (M=Al) and Li[Ni0.4Co0.15Fe0.05Mn0.4]O2 compounds were prepared in order to investigate the effect of replacement of all or part of the cobalt on the structural and electrochemical properties. The impact of substitution on the structure has been examined by both x-ray and neutron diffraction experiments. The incorporation of aluminum has minimal effect on the anti-site defect concentration, but leads to structural changes that affect electrochemical performance. The most important effect is an opening of the lithium slab dimension upon substitution, which results in improved rate performance compared to the parent compound. In contrast, the lithium slab dimension is not affected by iron substitution and no rate enhancement effect is observed. The cycling stability of aluminum containing materials is superior to both the parent material and iron-substituted materials.

25 ENERGY STORAGE↗

FREE STANDING NANOSTRUCTURED ANODES FOR LI-ION RECHARGEABLE BATTERIES

The free standing nanorodes of aluminum and cobalt oxides were grown on electrode and tested as the anodes directly in the half-cell. The average diameter and length of the nanorods are 80 nm and 200 nm respectively. The aligned nanorods demonstrated high initial capacity from 1200-1400 mAh/g at rate of 0.5C. The gradually decrease of initial capacity was observed. The preliminary characterization shows that the changes of the crystalline structure and morphology during cycling may be responsible for the capacity decay.

25 ENERGY STORAGE↗

Chemical Hydrogen Storage Using Polyhedral Borane Anions and Aluminum-Ammonia-Borane Complexes

Phase 1. Hydrolysis of borohydride compounds offer the potential for significant hydrogen storage capacity, but most work to date has focused on one particular anion, BH4-, which requires high pH for stability. Other borohydride compounds, in particular polyhedral borane anions offer comparable hydrogen storage capacity without requiring high pH media and their long term thermal and hydrolytic stability coupled with non-toxic nature make them a very attractive alternative to NaBH4. The University of Missouri project provided the overall program focal point for the investigation of catalytic hydrolysis of polyhedral borane anions for hydrogen release. Due to their inherent stability, a transition metal catalyst was necessary for the hydrolysis of polyhedral borane anions. Transition metal ions such as cobalt, nickel, palladium and rhodium were investigated for their catalytic activity in the hydrolysis of nido-KB11H14, closo-K2B10H10, and closo-K2B12H12. The rate of hydrolysis follows first-order kinetics with respect to the concentration of the polyhedral borane anion and surface area of the rhodium catalyst. The rate of hydrolysis depends upon a) choice of polyhedral borane anion, c) concentration of polyhedral borane anion, d) surface area of the rhodium catalyst and e) temperature of the reaction. In all cases the yield of hydrogen was 100% which corresponds to ~7 wt% of hydrogen (based on material wt%). Phase 2. The phase 2 of program at the University of Missouri was focused upon developing aluminum ammonia-boranes (Al-AB) as chemical hydrogen storage materials, specifically their synthesis and studies of their dehydrogenation. The ammonia borane molecule (AB) is a demonstrated source of chemically stored hydrogen (19.6 wt%) which meets DOE performance parameters except for its regeneration from spent AB and elemental hydrogen. The presence of an aluminum center bonded to multiple AB residues might combine the efficiency of AB dehydrogenation with an aluminum mediated hydrogenation process leading to reversibility. The Al-AB complexes have comparable hydrogen capacity with other M-AB and have potential to meet DOE’s 2010 and 2015 targets for system wt%.

08 HYDROGEN↗

Electrochemical Investigation of Li–Al Anodes in Oligo(ethylene glycol) Dimethyl Ether/LiPF6

1 M LiPF{sub 6} dissolved in oligo(ethylene glycol) dimethyl ether with a molecular weight 500 g mol{sup -1} was investigated as a new electrolyte (OEGDME500, 1 M LiPF{sub 6}) for metal deposition and battery applications. At 25 C a conductivity of 0.48 x 10{sup -3} S cm{sup -1} was obtained and at 85 C, 3.78 x 10{sup -3} S cm{sup -1}. The apparent activation barrier for ionic transport was evaluated to be 30.7 kJ mol{sup -1}. OEGDME500, 1 M LiPF{sub 6} allows operating temperature above 100 C with very attractive conductivity. The electrolyte shows excellent performance at negative and positive potentials. With this investigation, we report experimental results obtained with aluminum electrodes using this electrolyte. At low current densities lithium ion reduction and re-oxidation can be achieved on aluminum electrodes at potentials about 280 mV more positive than on lithium electrodes. In situ X-ray diffraction measurements collected during electrochemical lithium deposition on aluminum electrodes show that the shift to positive potentials is due to the negative Gibbs free energy change of the Li-Al alloy formation reaction.

25 ENERGY STORAGE↗