Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AIR POLLUTION ABATEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Interior Landscape Plants for Indoor Air Pollution Abatement

In this study, the leaves, roots, soil, and associated microorganisms of plants have been evaluated as a possible means of reducing indoor air pollutants. Additionally, a novel approach of using plant systems for removing high concentrations of indoor air pollutants such as cigarette smoke, organic solvents, and possibly radon has been designed from this work. This air filter design combines plants with an activated carbon filter. The rationale for this design, which evolved from wastewater treatment studies, is based on moving large volumes of contaminated air through an activated carbon bed where smoke, organic chemicals, pathogenic microorganisms (if present), and possibly radon are absorbed by the carbon filter. Plant roots and their associated microorganisms then destroy the pathogenic viruses, bacteria, and the organic chemicals, eventually converting all of these air pollutants into new plant tissue. It is believed that the decayed radon products would be taken up the plant roots and retained in the plant tissue.

Wolverton, B. C.↗

A Study of Interior Landscape Plants for Indoor Air Pollution Abatement

Previously, preliminary data on the ability of a group of common indoor plants to remove organic chemical from indoor air was presented. The group of plants chosen for this study was determined by joint agreement between NASA and the Associated Landscape Contractors of America. The chemicals chosen for study were benzene, trichloroethylene, and formaldehyde. The results show that plants can play a major role in removal of organic chemicals from indoor air.

Wolverton, B. C.↗

Generating CO{sub 2}-credits through landfill in situ aeration

Landfills are some of the major anthropogenic sources of methane emissions worldwide. The installation and operation of gas extraction systems for many landfills in Europe and the US, often including technical installations for energy recovery, significantly reduced these emissions during the last decades. Residual landfill gas, however, is still continuously produced after the energy recovery became economically unattractive, thus resulting in ongoing methane emissions for many years. By landfill in situ aeration these methane emissions can be widely avoided both, during the aeration process as well as in the subsequent aftercare period. Based on model calculations and online monitoring data the amount of avoided CO{sub 2-eq}. can be determined. For an in situ aerated landfill in northern Germany, acting as a case study, 83-95% (depending on the kind and quality of top cover) of the greenhouse gas emission potential could be reduced under strictly controlled conditions. Recently the United Nations Framework Convention on Climate Change (UNFCCC) has approved a new methodology on the 'Avoidance of landfill gas emissions by in situ aeration of landfills' (). Based on this methodology landfill aeration projects might be considered for generation of Certified Emission Reductions (CERs) in the course of CDM projects. This paper contributes towards an evaluation of the potential of landfill aeration for methane emissions reduction.

54 ENVIRONMENTAL SCIENCES↗

Climate change mitigation and adaptation in strategic environmental assessment

Countries are implementing CO{sub 2} emission reduction targets in order to meet a globally agreed global warming limit of +2 Degree-Sign C. However, it was hypothesised that these national reduction targets are not translated to regional or state level planning, and are not considered through Strategic Environmental Assessment (SEA) in order to meet emission reduction obligations falling on the transport, energy, housing, agriculture, and forestry sectors. SEAs of land use plans in the German state of Saxony, and the English region of the East of England were examined for their consideration of climate change impacts based on a set of criteria drawn from the literature. It was found that SEAs in both cases failed to consider climate change impacts at scales larger than the boundary of the spatial plan, and that CO{sub 2} reduction targets were not considered. This suggests a need for more clarity in the legal obligations for climate change consideration within the text of the SEA Directive, a requirement for monitoring of carbon emissions, a need for methodological guidance to devolve global climate change targets down to regional and local levels, and a need for guidance on properly implementing climate change protection in SEA. - Highlights: Black-Right-Pointing-Pointer Strategic Environmental Assessments (SEA) of 12 land use plans from Germany and England have been examined. Black-Right-Pointing-Pointer SEA failed to consider climate change impacts at scales larger than the boundary of the land use plans. Black-Right-Pointing-Pointer SEA should be an important instrument for climate protection. Black-Right-Pointing-Pointer Concrete steps for climate protection mainstreaming into SEA at the European Union and national levels have been suggested.

54 ENVIRONMENTAL SCIENCES↗

Variability of building environmental assessment tools on evaluating carbon emissions

With an increasing importance of sustainability in construction, more and more clients and designers employ building environmental assessment (BEA) tools to evaluate the environmental friendliness of their building facilities, and one important aspect of evaluation in the BEA models is the assessment of carbon emissions. However, in the absence of any agreed framework for carbon auditing and benchmarking, the results generated by the BEA tools might vary significantly which could lead to confusion or misinterpretation on the carbon performance of a building. This study thus aims to unveil the properties of and the standard imposed by the current BEA models on evaluating the life cycle carbon emissions. The analyses cover the (i) weighting of energy efficiency and emission levels among various environmental performance indicators; (ii) building life cycle stages in which carbon is taken into consideration; (iii) objectiveness of assessment; (iv) baseline set for carbon assessment; (v) mechanism for benchmarking the emission level; and (v) limitations of the carbon assessment approaches. Results indicate that the current BEA schemes focus primarily on operational carbon instead of the emissions generated throughout the entire building life cycle. Besides, the baseline and benchmark for carbon evaluation vary significantly among the BEA tools based on the analytical results of a hypothetical building. The findings point to the needs for a more transparent framework for carbon auditing and benchmarking in BEA modeling. - Highlights: Black-Right-Pointing-Pointer Carbon emission evaluation in building environmental assessment schemes are studied. Black-Right-Pointing-Pointer Simulative carbon emission is modeled for building environmental assessment schemes. Black-Right-Pointing-Pointer Carbon assessments focus primarily on operational stage instead of entire lifecycle. Black-Right-Pointing-Pointer Baseline and benchmark of carbon assessment vary greatly among BEA schemes. Black-Right-Pointing-Pointer A more transparent and comprehensive framework for carbon assessment is required.

54 ENVIRONMENTAL SCIENCES↗

A Pareto analysis approach to assess relevant marginal CO{sub 2} footprint for petroleum products

Recently, linear programing (LP) models have been extended to track the marginal CO{sub 2} intensity of automotive fuels at the refinery gate. The obtained CO{sub 2} data are recommended for policy making because they capture the economic and environmental tensions as well as the processing effects related to oil products. However, they are proven to be extremely sensitive to small perturbations and therefore useless in practice. In this paper, we first investigate the theoretical reasons of this drawback. Then, we develop a multiple objective LP framework to assess relevant marginal CO{sub 2} footprints that preserve both defensibility and stability at a satisfactory level of acceptance. A case study illustrates this new methodology. - Highlights: • Refining LP models have limitations to provide useful marginal CO{sub 2} footprints. • A multi objective optimization framework is developed to assess relevant CO{sub 2} data. • Within a European Refinig industry, diesel is more CO{sub 2} intensive than gasoline.

54 ENVIRONMENTAL SCIENCES↗

Red warning for air pollution in China: Exploring residents' perceptions of the first two red warnings in Beijing

Highlights: • We explore residents' perceptions of the first two red warnings issuance and its emergency measures in Beijing. • There is a significant different perception of the first two red warnings issuance. • People recommended that instead of reducing the number of red warnings, the red warning emergency measure should be adjusted. • Groups influenced by red warning gave less support its emergency measures. Air pollution early warnings have been issued in China to mitigate the effects of high pollution days. Public perceptions and views about early warning signals can affect individual behaviors and play a major role in the public's response to air pollution risks. This study examined public attitudes and responses to the first two red warnings for air pollution in Beijing in 2015. An online survey was sent out, and 664 respondents (response rate = 90%) provided their perspectives on the red warnings. Descriptive statistics, sign tests and binary logit models were used to analyze the data. More than half of the respondents reported that their life and work were affected by the red warning in December 2015. In contrast to their perceptions about the second red warning period, the public thought that the first red warning should have been issued earlier and that the number of consecutive days of warnings should have been reduced. The respondents also recommended that instead of reducing the number of red warnings, the red warning emergency measures should be adjusted. Specifically, the public preferred the installation of air purifiers in schools rather than closing schools and strengthening road flushing and dust pollution controls over restrictions on driving. Data analyses were conducted to examine the affected groups and different groups' perceptions of the necessity of implementing emergency measures. The results indicated that men and more educated respondents were more likely to be affected by driving limitations, and men were less supportive of these limitations. The age and education of respondents were significantly negatively associated with the opinion that schools should be closed, whereas wealthier respondents were more supportive of school closings. The finding of a negative attitude among the public toward the first two red warnings may be used to help local governments modify protective measures and pollution mitigation initiatives to increase acceptance.

54 ENVIRONMENTAL SCIENCES↗

Upgraded biogas from municipal solid waste for natural gas substitution and CO{sub 2} reduction – A case study of Austria, Italy, and Spain

Highlights: • Biogas can be upgraded to create biomethane, a substitute to natural gas. • Biogas upgrading was applied to landfills and anaerobic digestors in 3 countries. • Up to 0.6% of a country’s consumption of natural gas could be replaced by biomethane. • Italy could save 46% of the national CO{sub 2} emissions attributed to the waste sector. • Scenarios were created to increase biomethane production. - Abstract: Biogas is rich in methane and can be further purified through biogas upgrading technologies, presenting a viable alternative to natural gas. Landfills and anaerobic digestors treating municipal solid waste are a large source of such biogas. They therefore offer an attractive opportunity to tap into this potential source of natural gas while at the same time minimizing the global warming impact resulting from methane emissions in waste management schemes (WMS) and fossil fuel consumption reduction. This study looks at the current municipal solid waste flows of Spain, Italy, and Austria over one year (2009), in order to determine how much biogas is generated. Then it examines how much natural gas could be substituted by using four different biogas upgrading technologies. Based on current waste generation rates, exploratory but realistic WMS were created for each country in order to maximize biogas production and potential for natural gas substitution. It was found that the potential substitution of natural gas by biogas resulting from the current WMS seems rather insignificant: 0.2% for Austria, 0.6% for Italy and 0.3% for Spain. However, if the WMS is redesigned to maximize biogas production, these figures can increase to 0.7% for Austria, 1% for Italy and 2% for Spain. Furthermore, the potential CO{sub 2} reduction as a consequence of capturing the biogas and replacing fossil fuel can result in up to a 93% reduction of the annual national waste greenhouse gas emissions of Spain and Italy.

54 ENVIRONMENTAL SCIENCES↗

Application of hybrid coal reburning/SNCR processes for NOx reduction in a coal-fired boiler

Boilers in Beijing Thermal Power Plant of Zhongdian Guohua Co. in China are coal-fired with natural circulation and tangential fired method, and the economical continuous rate is 410 ton per hour of steam. Hybrid coal reburning/SNCR technology was applied and it successfully reduced NOx to about 170 mg/Nm{sup 3} from about 540 mg/Nm{sup 3}, meanwhile ammonia slip was lower than 10 ppm at 450-210 t/h load and the total reduction efficiency was about 70%. Normal fineness pulverized coal from the bin was chosen as the reburning fuel and the nozzles of the upper primary air were retrofitted to be used as the reburning fuel nozzles. The reducing agent of SNCR was an urea solution, and it was injected by the four layer injectors after online dilution. At 410 t/h load, NOx emission was about 300 mg/Nm{sup 3} when the ratio of reburning fuel to the total fuel was 25.9%-33.4%. Controlling the oxygen content of the gas in the reversal chamber to less than 3.4% resulted in not only low NOx emission but also high combustion efficiency. Ammonia slip distribution in the down gas pass was uneven and ammonia slip was higher in the front of the down gas pass than in the rear of the down gas pass. NSR and NOx reduction were proportional to each other and usually resulted in more ammonia slip with reduction in NOx. About 100 mg/Nm{sup 3} NOx emission could be achieved with about 40 ppm NH{sub 3} slip at 300-450 t/h, and ammonia slip from the SNCR reactions could be used as reducing agent of SCR, which was favorable for the future SCR retrofit.

01 COAL, LIGNITE, AND PEAT↗

Coal: world energy security. The Clearwater clean coal conference

Topics covered include: oxy-fuel (overview, demonstrations, experimental studies, burner developments, emissions, fundamental and advanced concepts); post-combustion CO{sub 2} capture; coal conversion to chemicals and fuels; advanced materials; hydrogen production from opportunity fuels; mercury abatement options for power plants; and carbon capture and storage in volume 1. Subjects covered in volume 2 include: advanced modelling; advanced concepts for emission control; gasification technology; biomass; low NOx technology; computer simulations; multi emissions control; chemical looping; and options for improving efficiency and reducing emissions.

01 COAL, LIGNITE, AND PEAT↗

Estimation of abatement potentials and costs of air pollution emissions in China

Understanding the air pollution emission abatement potential and associated control cost is a prerequisite to design cost ef?cient control policies. In this study, a linear programming algorithm model, International Control Cost Estimate Tool, was updated with cost data for applications of 56 types of end-of-pipe technologies and ?ve types of renewable energy in 10 major sectors namely power generation, industry combustion, cement pro-duction, iron and steel production, other industry processes, domestic combustion, transportation, solvent use, livestock rearing, and fertilizer use. The updated model was implemented to estimate the abatement potential and marginal cost of multiple pollutants in China. The total maximum abatement potentials of sulfur dioxide (SO2), nitrogen oxides (NOx), primary particulate matter (PM2.5), non-volatile organic compounds (NMVOCs), and ammonia (NH3) in China were estimated to be 19.2, 20.8, 9.1, 17.2 and 8.6 Mt, respectively, which accounted for 89.7%, 89.9%, 94.6%, 74.0%, and 80.2% of their total emissions in 2014, respectively. The associated control cost of such reductions was estimated as 92.5, 469.7, 75.7, 449.0, and 361.8 billion CNY in SO2, NOx, primary PM2.5, NMVOCs and NH3, respectively. Shandong, Jiangsu, Henan, Zhejiang, and Guangdong provinces exhibited large abatement potentials for all pollutants. Provincial disparity analysis shows that high GDP regions tend to have higher reduction potential and total abatement costs. End-of-pipe technologies tended be a cost-ef?cient way to control pollution in industries processes (i.e., cement plants, iron and steel plants, lime production, building ceramic production, glass and brick production), whereas such technologies were less cost- effective in fossil fuel-related sectors (i.e., power plants, industry combustion, domestic combustion, and transportation) compared with renewable energy. The abatement potentials and marginal abatement cost curves developed in this study can further be used as a crucial component in an integrated model to design optimized cost-ef?cient control policies.

Zhang, Fenfen↗

Remote sensing of air pollutants

Monitoring of pollutants within the troposphere is discussed. Selected specific techniques were investigated and it was shown how the use of these techniques fits into the overall national strategy for air pollution abatement.

Eckert, J. A.↗

Utilization of Renewable Oxygenates as Gasoline Blending Components

This report reviews the use of higher alcohols and several cellulose-derived oxygenates as blend components in gasoline. Material compatibility issues are expected to be less severe for neat higher alcohols than for fuel-grade ethanol. Very little data exist on how blending higher alcohols or other oxygenates with gasoline affects ASTM Standard D4814 properties. Under the Clean Air Act, fuelsused in the United States must be 'substantially similar' to fuels used in certification of cars for emission compliance. Waivers for the addition of higher alcohols at concentrations up to 3.7 wt% oxygen have been granted. Limited emission testing on pre-Tier 1 vehicles and research engines suggests that higher alcohols will reduce emissions of CO and organics, while NOx emissions will stay thesame or increase. Most oxygenates can be used as octane improvers for standard gasoline stocks. The properties of 2-methyltetrahydrofuran, dimethylfuran, 2-methylfuran, methyl pentanoate and ethyl pentanoate suggest that they may function well as low-concentration blends with gasoline in standard vehicles and in higher concentrations in flex fuel vehicles.

02 PETROLEUM↗

Abatement of CF{sub 4} and CHF{sub 3} byproducts using low-pressure plasmas generated by annular-shaped electrodes

Three different driving schemes are tested for a plasma reactor designed to abate the greenhouse gases emitted by the semiconductor industry. The reactor and electrodes all have a concentric annular shape, which allows them to be easily connected to pre-existing pipelines without any disturbance to the exhaust stream. The destruction and removal efficiencies are measured for CF{sub 4} by varying the O{sub 2}/CF{sub 4} ratio and pressure. The influences of adding O{sub 2} and H{sub 2}O to the byproducts of the CHF{sub 3} abatement process are investigated by analyzing the spectra resulting from Fourier transform infrared spectroscopy measurements. Based on the experimental results we suggest an appropriate combination of driving scheme and reactant gas species for efficient and economical abatement of a mixture of CHF{sub 3} and CF{sub 4}. Then, the optimal flow rate of the reactant gas is presented. Finally, the reduction rates for global warming emissions are estimated to demonstrate the feasibility of using our device for abatement of greenhouse gases emitted by the semiconductor industry.

54 ENVIRONMENTAL SCIENCES↗

Emissions mitigation of blended coals through systems optimization

For coal fired power stations, such as those located in the US, that have installed NOx and SOx emissions abatement equipment substantial carbon dioxide reduction could be achieved by shifting from pure PRB coal to blended coals with local bituminous coal. Don Labbe explains how. The article is based on a presentation at Power-Gen Asia 2009, which takes place 7-9 October in Bangkok, Thailand and an ISA POWID 2009 paper (19th Annual Joint ISA POWID/EPRI Controlls and Instrumentation Conference, Chicago, Illinois, May 2009). 4 refs., 3 figs.

01 COAL, LIGNITE, AND PEAT↗

Analysis of potential for reducing emissions of greenhouse gases in municipal solid waste in Brazil, in the state and city of Rio de Janeiro

Highlights: ► We constructed future scenarios of emissions of greenhouse gases in waste. ► Was used the IPCC methodology for calculating emission inventories. ► We calculated the costs of abatement for emissions reduction in landfill waste. ► The results were compared to Brazil, state and city of Rio de Janeiro. ► The higher the environmental passive, the greater the possibility of use of biogas. - Abstract: This paper examines potential changes in solid waste policies for the reduction in GHG for the country of Brazil and one of its major states and cities, Rio de Janeiro, from 2005 to 2030. To examine these policy options, trends in solid waste quantities and associated GHG emissions are derived. Three alternative policy scenarios are evaluated in terms of effectiveness, technology, and economics and conclusions posited regarding optimal strategies for Brazil to implement. These scenarios are been building on the guidelines for national inventories of GHG emissions (IPCC, 2006) and adapted to Brazilian states and municipalities’ boundaries. Based on the results, it is possible to say that the potential revenue from products of solid waste management is more than sufficient to transform the current scenario in this country into one of financial and environmental gains, where the negative impacts of climate change have created a huge opportunity to expand infrastructure for waste management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluation of the Waste Streams from Management of Reprocessing Off-Gas Streams - 18483

Nuclear fuel reprocessing is being considered in the United States as part of an effort to help meet US energy needs and as a means to improve waste management. During the chemical processing of UNF to recover the valuable components for reuse, a number of volatile radionuclides will be released into the off-gas streams of the reprocessing plant. These volatile radionuclides include H-3, C-14, Kr-85, and I-129. Off-gas abatement systems for the volatile radionuclides will be required to ensure that air emissions from a UNF reprocessing facility can meet or exceed emission requirements set forth by the US Environmental Protection Agency and the US Nuclear Regulatory Commission. An initial engineering evaluation of offgas abatement systems was completed recently. The evaluation addressed the designs of the head-end offgas treatment system, which typically includes both the shear off-gas and the dissolver off-gas and vessel off-gas treatment system. Based on this study, the waste volumes for each of the four primary volatile radionuclides (H-3, C-14, Kr-85, and I-129) were estimated. Included in these estimates were the nonradioactive isotopes and the 'tramp' elements found in air (e.g., Kr and C-12 as CO{sub 2}) and process chemicals (e.g., I and Cl). Because the final waste form for these radionuclides has not been selected, estimated volumes were calculated for various alternative waste forms as appropriate. The resulting waste volume for I was found to be highly dependent on the final waste form selected and increased by a factor of 2 to 4 by tramp halogens that would be released into the off-gas stream from the process chemicals. The volume of tritiated water from the fuel was quite small, but the estimated volume of the final waste form depended on the tritium management approach employed within the reprocessing plant. The Kr waste volume was calculated assuming pure Kr (i.e., assuming complete separation of Xe and Ar). For the case of no Xe separation, the estimated waste volume increased by factor of ∼10. Argon from the air, if not removed, increased the estimated volume by a factor of 425. The estimated volume of C-14 waste was dominated by the CO{sub 2} from the air leaking into the processing cell. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗