Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Generalized adsorption isotherms for molecular and dissociative adsorption of a polar molecular species on two polar surface geometries: Perovskite (100) (Pm-3m) and fluorite (111) (Fm-3m)

Lattice based kinetic Monte Carlo simulations have been used to determine a functional form for the second order adsorption isotherms on two commonly investigated crystal surfaces: the (111) fluorite surface and the (100) perovskite surface which has the same geometric symmetry as the NaCl (100) surface. The functional form is generalized to be applicable to all values of the equilibrium constant by a shift along the pressure axis. Functions have been determined for estimating the pressure at which a desired coverage would be achieved and, conversely, for estimating the coverage at a certain pressure. The generalized form has been calculated by investigating the surface adsorbate coverage across a range of thermodynamic equilibrium constants that span the range 10{sup −26} to 10{sup 13}. The equations have been shown to be general for any value of the adsorption equilibrium constant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A Tunable Bimetallic MOF-74 for Adsorption Chiller Applications: A Tunable Bimetallic MOF-74 for Adsorption Chiller Applications

A mixed metal strategy, in which two different metal nodes coexist in one MOF framework, was examined using MOF-74. The Ni salt precursor for the MOF-74(Ni) analogue was partially replaced during synthesis with relatively inexpensive Zn salt. These bimetallic MOFs were developed and examined for water sorption for potential use in adsorption cooling/chiller applications. Varying concentration ratios of Ni:Zn in MOF-74 achieved using this mixed metal strategy were shown to provide unique impacts on H2O uptake while significantly mitigating the costs of synthesis

Liu, Jian↗
DOE OSTI2016

Hybrid Ultra‐Microporous Materials for Selective Xenon Adsorption and Separation

Abstract The demand for Xe/Kr separation continues to grow due to the industrial significance of high‐purity Xe gas. Current separation processes rely on energy intensive cryogenic distillation. Therefore, less energy intensive alternatives, such as physisorptive separation, using porous materials, are required. Herein we show that an underexplored class of porous materials called hybrid ultra‐microporous materials (HUMs) affords new benchmark selectivity for Xe separation from Xe/Kr mixtures. The isostructural materials, CROFOUR‐1‐Ni and CROFOUR‐2‐Ni, are coordination networks that have coordinatively saturated metal centers and two distinct types of micropores, one of which is lined by CrO 4 2− (CROFOUR) anions and the other is decorated by the functionalized organic linker. These nets offer unprecedented selectivity towards Xe. Modelling indicates that the selectivity of these nets is tailored by synergy between the pore size and the strong electrostatics afforded by the CrO 4 2− anions.

Mohamed, Mona H.↗
DOE OSTI2019

Mechanistic insight into the passive NOx adsorption in the highly dispersed Pd/HBEA zeolite

Passive NOx adsorption using zeolite supported Pd catalysts has been considered one of most effective methods for low-temperature NO storage in diesel engine emission control. In the present work, first-principles density functional theory calculations were used to study NO adsorption at the highly dispersed Pd sites, i.e., monomeric PdIIO and dimeric [PdIIOPdII]2+ in the H-BEA zeolite. It has been found that each PdIIO and [PdIIOPdII]2+ sites could bind with three and four NO molecules, respectively. Upon adsorption, NO could be oxidized to NO2, resulting in the reduction of PdII to Pd0 for PdIIO and PdII to PdI, for [PdIIOPdII]2+, respectively. With increasing NO coverage at both sites, NO oxidation becomes more facile with low activation barriers of 13 and 22 kJ/mol. At the PdIIOPdII site, the binding of formed NO2 becomes weak at high NO coverage. Both PdIIO and [PdIIOPdII]2+ sites are protonated to the more stable [PdIIOH]+ and [PdIIOH]+/[PdIIOH]+ sites in the presence of H2O or neighboring BAS sites. Finally, we studied the CO effect on the NO adsorption in Pd/H-BEA. With co-fed CO in the NOx mixture, both PdIIO and [PdIIOPdII]2+ could be reduced to Pd0 and [PdI-PdI]2+ sites. Compared to the NO adsorption, our calculations show that CO adsorption is slightly stronger at the [PdIIOPdII]2+ site while it is slightly weaker at the PdIIO site. CO oxidation, rather than NO oxidation readily occurs if NO and CO co-adsorbed. The reduced PdI site and the [PdIIOH]+/[PdIIOH]+ site enhances NO adsorption.

passive NOx adsorption, density functional theory,↗
DOE OSTI2019

First-principles study of the surface properties of y-LiAlO2: Stability and tritium adsorption

y-LiAlO2 enriched with 6Li isotope exhibits excellent performance under neutron radiation and is used in tritium-producing burnable absorber rods (TPBARs) to produce tritium (T, 3H) in pressurized water reactor (PWR). To better understand the 3H formation and diffusion on the surfaces, the first-principles calculations are performed to study the stability of y-LiAlO2 surface and the 3H adsorption on the surface. By considering all possible symmetrical stoichiometric and nonstoichiometric low-index surfaces, two most stable surfaces, one stoichiometric (100) and one nonstoichiometric (101), were identified. The 3H adsorption and diffusion on the most stable (100) surface were further explored, and the obtained results show that there are four stable sites (three O and one Al atop) for 3H adsorption. The calculated Bader charges of atoms reflect that 3H adsorption on the top of O site is a reduction process, while on the top of Al site is an oxidation one. Under low adsorption coverage of 1/4 per surface unit cell, 3H atoms are adsorbed on the most stable OA atop site. With increasing 3H diffused from bulk to surface, the AlG site is the second choice for 3H adsorption, and then the OB site. The coverage of 2/4 is the most favorable 3H adsorption state due to the counteracted charge transfer. When the coverage is up to 4/4, the interaction between 3H atoms leads to partial formation of T2 molecule that desorbs from surface. Therefore, T2 molecule should be the main product from the perfect surface of y-LiAlO2 at high 3H coverage.

Stability of y-LiAlO2 surface, Tritium-producing b↗
DOE OSTI2018

Modeling of Cd adsorption to goethite-bacteria composites

The accurate modeling of heavy metal adsorption in complex systems is fundamental for risk assess-ments in soils and associated environments. Bacteria-iron (hydr)oxide associations in soils and sedi-ments play a critical role in heavy metal immobilization. The reduced adsorption of heavy metals on these composites have been widely reported using the component additivity (CA) method. However, there is a lack of a mechanism model to account for these deviations. In this study, we established models for Cd adsorption on goethite-Pseudomonas putida composites at 1:1 and 5:1 mass ratios. Cadmium adsorption on the 5:1 composite was consistent with the additivity method. However, the CA method over predicted Cd adsorption by approximately 8% on the 1:1 composite at high Cd concentration. The deviation was corrected by adding the site blockage reactions between P. putida and goethite. Both CA and “CA-site masking” models for Cd adsorption onto the composites were in line with the ITC data. These results indicate that CA method in simulating Cd adsorption on bacteria-iron oxides composites is limited to low bacterial and Cd concentrations. Therefore the interfacial complexation reactions that occur between iron (hydr)oxides and bacteria should be taken into account when high concentrations of bacteria and heavy metals are present.

Qu, Chenchen↗
DOE OSTI2019

The Nature of Hydrogen Adsorption on Platinum in the Aqueous Phase

H2 adsorption properties on Pt in aqueous phase was determined by a reaction kinetic measurement of gas H2 reacting with liquid D2O into liquid HDO, gas HD and D2, and a DFT based ab inito molecular dynamic simulation of H2 adsorption on Pt (111) in the presence and absence of water. Both approaches show that the H2 adsorption on Pt in water is much weaker than that in the gas phase. The presence of interfacial water destabilizes the adsorbed H on Pt via decreasing the adsorption heat (hydrogen binding energy) by 19 - 22 kJ·molH2-1 and inducing an extra entropy loss of 50 - 70 J·mol H2-1·K-1. Upon H adsorption on Pt, the closest water layer near Pt surface shifts to a larger distance from the surface and re-orientates to a more ordered structure; in turn, the water layer limits the translation mobility of adsorbed H on Pt. The influence of interfacial water property on H2 adsorption is also reflected by the decrease of adsorption heat with the decrease of local pH provided by the support. Research was funded by the Laboratory Directed Research and Development program at Pacific Northwest National Laboratory.

Yang, Guoju↗
DOE OSTI2018

Superior lithium adsorption and required magnetic separation behavior of iron-doped lithium ion-sieves

The recent research on adsorption-based lithium recovery from lithium-containing solutions has been centred on adsorption capacity and separation of lithium ion-sieves powder from solutions. Herein, an effective iron-doped lithium titanium oxide (Fe-doped Li 2 TiO 3 ) was synthesized by Fe-doping via solid state reactions followed by acid treatment to form iron-doped lithium ion-sieves (Fe/Ti-x(H)). The resulting solid powder displays both superior adsorption capacity of lithium and high separation efficiency of the adsorbent from the solutions. SEM imaging and BET surface area measurement results showed that at Fe doping levels x ≤ 0.15, Fe-doping led to grain shrinkage as compared to Li 2 TiO 3 and at the same time the BET surface area increased. The Fe/Ti-0.15(H) exhibited saturated magnetization values of 13.76 emu g -1 , allowing effective separation of the material from solid suspensions through the use of a magnet. Consecutive magnetic separation results suggested that the Fe/Ti-0.15(H) powders could be applied at large-scale and continuously removed from LiOH solutions with separation efficiency of 96% or better. Lithium adsorption studies indicated that the equilibrium adsorption capacity of Fe/Ti-0.15(H) in LiOH solutions (1.8 g L -1 Li, pH 12) reached 53.3 mg g -1 within 24 h, which was higher than that of pristine Li 2 TiO 3 (50.5 mg g-1) without Fe doping. Competitive adsorption and regeneration results indicated that the Fe/Ti-0.15(H) possessed a high selectivity for Li with facile regeneration. Therefore, it could be expected that the iron-doped lithium ion-sieves have practical applicability potential for large scale lithium extraction and recovery from lithium-bearing solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling Pb(II) Adsorption on Mineral Surfaces: Bridging Density Functional Theory and Experiment with Thermodynamic Insights

Despite decades of work on aqueous lead (Pb) adsorption on a-Fe2O3 (hematite) and a-Al2O3 (alumina), gaps between measurements and modeling obscure molecular-level understanding. Achieving well-matched geometries between theory and experimental for mineral-water interfaces is a hurdle, as surface functional group type and distribution must be accounted for in determining mechanisms. Additionally, computational methods that can describe the substrate are often not appropriate to capture aqueous effects. Progress requires focusing on well-studied and relevant systems, such as key facets (001),(012), and (110) of hematite and alumina, and ubiquitous contaminants such as aqueous Pb. In the past, bulk-parametrized bond-valence principles were used to rationalize Pb(II) adsorption trends. These approaches can break down at surfaces, where flexible bonding environments and adsorption-induced surface relaxations play a critical role. Here, we adapt and apply a density functional theory (DFT) and thermodynamics framework, integrating DFT-calculated energies with experimental data and electrochemical principles, to predict Pb(II) adsorption. Our model results capture trends across the full set of surfaces and predict that inner-sphere Pb(II) sorption on (001) alumina varies from unfavorable to weakly favorable across a range of pH conditions. This aligns with experiment insights that Pb(II) interacts at that surface through outer-sphere interactions. Extending to Fe(II) adsorption, we demonstrate a coverage-dependent site preference, potentially explaining disorder in overlayers grown by the oxidative adsorption of Fe(II) on hematite (001).

lead contamination↗
DOE OSTI2020

Enthalpy of Uranium Adsorption onto Hematite

The influence of temperature on the adsorption of metal-ions at the solid-water interface is often overlooked, despite the important role that adsorption plays in metal ion fate and transport in the natural environment where temperatures vary widely. Herein, we examine the temperature-dependent adsorption of uranium, a widespread radioactive contaminant, onto the ubiquitous iron oxide, hematite. The multi-temperature batch adsorption data and surface complexation models indicate that adsorption of uranium, as the hexavalent uranyl (UO 2 2+ ) ion, increases significantly with increasing temperature, with an adsorption enthalpy (ΔH ads ) of +71 kJ mol –1 . We suggest that this endothermic, entropically-driven adsorption behavior is linked to reorganization of the uranyl-ion-hydration and interfacial water structures upon U VI adsorption at the hematite surface. Altogether, this work provides fundamental insight into the thermodynamics driving metal-ion adsorption reactions and provides the specific enthalpy value necessary for improved predictive geochemical modeling of U VI adsorption in the environment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Understanding the Effect of Single Atom Cationic Defect Sites in an Al 2 O 3 (012) Surface on Altering Selenate and Sulfate Adsorption: An Ab Initio Study

Adsorption is a promising under-the-sink selenate remediation technique for distributed water systems. Recently it was shown that adsorption induced water network rearrangement control adsorption energetics on the α-Al 2 O 3 (012) surface. Here, we aim to elucidate the relative importance of the water network effects and surface cation identity on controlling selenate and sulfate adsorption energy using density functional theory calculations. Density functional theory (DFT) calculations predicted the adsorption energies of selenate and sulfate on nine transition metal cations (Sc–Cu) and two alkali metal cations (Ga and In) in the α-Al 2 O 3 (012) surface under simulated acidic and neutral pH conditions. We find that the water network effects had a larger impact on the adsorption energy than the cationic identity. However, cation identity secondarily controlled adsorption. Most cations decreased the adsorption energy, weakening the overall performance, the larger Sc and In cations enabled inner-sphere adsorption in acidic conditions because they relaxed outward from the surface, providing more space for adsorption. Additionally, only Ti induced Se selectivity over S by reducing the adsorbing selenate to selenite but not reducing the sulfate. Altogether, this study indicates that tuning water network structure will likely have a larger impact than tuning cation–selenate interactions for increasing adsorbate effectiveness.

Adsorption↗
DOE OSTI2017

A Diaminopropane-Appended Metal–Organic Framework Enabling Efficient CO 2 Capture from Coal Flue Gas via a Mixed Adsorption Mechanism

Here, a new diamine-functionalized metal-organic framework comprised of 2,2-dimethyl-1,3-diaminopropane (dmpn) appended to the Mg 2+ sites lining the channels of Mg 2 (dobpdc) (dobpdc 4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) is characterized for the removal of CO 2 from the flue gas emissions of coal-fired power plants. Unique to members of this promising class of adsorbents, dmpn-Mg2(dobpdc) displays facile step-shaped adsorption of CO 2 from coal flue gas at 40 °C and near complete CO 2 desorption upon heating to 100 °C, enabling a high CO 2 working capacity (2.42 mmol/g, 9.1 wt %) with a modest 60 °C temperature swing. Evaluation of the thermodynamic parameters of adsorption for dmpn-Mg 2 (dobpdc) suggests that the narrow temperature swing of its CO 2 adsorption steps is due to the high magnitude of its differential enthalpy of adsorption (Δh ads = -73 ± 1 kJ/mol), with a larger than expected entropic penalty for CO 2 adsorption (Δs ads = -204 ± 4 J/mol·K) positioning the step in the optimal range for carbon capture from coal flue gas. In addition, thermogravimetric analysis and breakthrough experiments indicate that, in contrast to many adsorbents, dmpn-Mg 2 (dobpdc) captures CO 2 effectively in the presence of water and can be subjected to 1000 humid adsorption/desorption cycles with minimal degradation. Solid-state 13 C NMR spectra and single-crystal X-ray diffraction structures of the Zn analogue reveal that this material adsorbs CO 2 via formation of both ammonium carbamates and carbamic acid pairs, the latter of which are crystallographically verified for the first time in a porous material. Taken together, these properties render dmpn-Mg 2 (dobpdc) one of the most promising adsorbents for carbon capture applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Benchmarking the accuracy of coverage-dependent models: adsorption and desorption of benzene on Pt (111) and Pt 3 Sn (111) from first principles

Bimetallic catalysts have demonstrated properties favorable for upgrading biofuel through catalytic hydrodeoxygenation. However, the design and optimization of such bimetallic catalysts requires the ability to construct accurate, predictive models of these systems. To generate a model that predicts the kinetic behavior of benzene adsorbed on Pt (111) and a Pt 3 Sn (111) surface alloy (Pt 3 Sn (111)), the adsorption of benzene was studied for a wide range of benzene coverages on both surfaces using density functional theory (DFT) calculations. The adsorption energy of benzene was found to correlate linearly with benzene coverage on Pt (111) and Pt 3 Sn (111); both surfaces exhibited net repulsive lateral interactions. Through an analysis of the d-band properties of the metal surface, it was determined that the coverage dependence is a consequence of the electronic interactions between benzene and the surface. The linear coverage dependence of the adsorption energy allowed us to quantify the influence of the lateral interactions on the heat of adsorption and temperature programmed desorption (TPD) spectra using a mean-field model. A comparison of our simulated TPD to experiment showed that this mean-field model adequately reproduces the desorption behavior of benzene on Pt (111) and Pt 3 Sn (111). In particular, the TPD correctly exhibits a broadening desorption peak as the initial coverage of benzene increases on Pt (111) as well as and a low temperature desorption peak on Pt 3 Sn (111). Furthermore, due to the sensitivity of the TPD peak temperature to the desorption energy, precise alignment of experimental and theoretical TPD spectra demands an accurate calculation of the adsorption energy. Therefore, an analysis of the effect of the exchange-correlation functional on TPD modeling is presented. Through this work, we show the necessity of incorporating lateral interactions into theoretical models in order to correctly predict experimental behavior.

09 BIOMASS FUELS↗