Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACETONE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Effect of Cobalt Particle Size on Acetone Steam Reforming

Abstract Carbon‐supported cobalt nanoparticles with different particle sizes were synthesized and characterized by complementary characterization techniques such as X‐ray diffraction, N 2 sorption, acetone temperature‐programmed desorption, transmission electron microscopy, and CO chemisorption. Using acetone steam reforming reaction as a probe reaction, we revealed a volcano‐shape curve of the intrinsic activity (turnover frequency of acetone) and the CO 2 selectivity as a function of the cobalt particle size with the highest activity and selectivity observed at a particle size of approximately 12.8 nm. Our results indicate that the overall performance of acetone steam reforming is related to a combination of particle‐size‐dependent acetone decomposition, water dissociation, and the oxidation state of the cobalt nanoparticles.

Sun, Junming↗

Insights into Acetone Photochemistry on Rutile TiO2(110). 1. Off-Normal CH3 Ejection from Acetone Diolate.

Thermal- and photon-stimulated reactions of acetone co-adsorbed with oxygen on rutile TiO2(110) surface are studied with infrared reflection-adsorption spectroscopy (IRAS) combined with temperature programmed desorption and angle-resolved photon stimulated desorption. IRAS results show that n2-acetone diolate ((CH3)2COO) is produced via thermally-activated reactions between the chemisorbed oxygen with co-adsorbed acetone. Formation of acetone diolate is also consistent with 18O / 16O isotopic exchange experiments. During UV irradiation at 30 K, CH3 radicals are ejected from the acetone diolate with a distribution that is peaked at .-. +- 66 degrees from the surface normal along the azimuth (i.e. perpendicular to the rows of bridging oxygen and Ti5c ions). This distribution is also consistent with the orientation of the C–CH3 bonds in the n2-acetone diolate on TiO2(110). The acetone diolate peaks disappear from the IRAS spectra after UV irradiation and new peaks are observed and associated with n2-acetate. The data presented here demonstrate direct signatures of the proposed earlier 2-step mechanism for acetone photooxidation on TiO2(110)

Environmental Molecular Sciences Laboratory↗

Surface acetone reactions on ZnxZryOz: A DRIFTS-MS study

We report a systematic DRIFTS-MS study of surface acetone aldolization and self-deoxygenation reactions on ZrO2 and Zn1Zr10Oz, using temperature programmed surface reactions of both acetone reactant and possible intermediate compounds including diacetone alcohol, mesityl oxide, phorone, and isophorone. DRIFTS was used to monitor the evolution of surface species while MS was used to track corresponding gas phase products, in an attempt to identify the distinct reaction pathways observed on the two catalysts as well as the role zinc plays in the corresponding reaction pathways. It is found that aldol condensation (or aldolization) of acetone occurs readily at low temperature (298?K), forming mainly acetone dimers (i.e., diacetone alcohol, DAA/mesityl oxide, MSO) on both ZrO2 and Zn1Zr10Oz with the latter being more active. At elevated temperatures, secondary MSO reactions are diverted, mainly caused by the different Lewis basicity on the two catalysts. Over ZrO2, MSO reacts with activated acetone (acetone enolate) to form a surface 4,4-dimethyl-2,6-heptadione (phorone-C), which is further converted into a stable isophorone intermediate. At temperatures above 473?K, polymerization/oligomerization of isophorone along with basic hydroxyl promoted decomposition reactions occur, leading to the formation of heavier carbonaceous surface species and gas-phase side products (methane and CO2). The addition of zinc balances the surface acid-base properties on ZnxZryOz (i.e., Zn1Zr10Oz) via not only enhancing the surface Lewis basicity but passivating the strong acidity. This balance, especially the enhanced surface Lewis basicity largely promotes the a-H abstraction of MSO to form MSO enolate on the Zn1Zr10Oz, which thus favors the aldolization of MSO enolate and acetone, a reaction tends to form 2,6-dimethyl-2,5-heptadien-4-one (phorone-A). Phorone-A then readily decomposes to produce isobutene as a major product at temperature as low as 373?K. Note that, despite the facile formation of isobutene at low temperatures, a high temperature (673?K) is still necessary to release the strongly adsorbed formate/carbonate/acetate species via CO2 formation.

Li, Houqian↗

Addition of H2O and O-2 to Acetone and Dimethylsulfoxide Ligated Uranyl (V) Dioxocations

Gas-phase complexes of the formula [UO2(lig)]+ (lig = acetone (aco) or dimethylsulfoxide (dmso)) were generated by electrospray ionization (ESI) and studied by tandem ion-trap mass spectrometry to determine the general effect of ligand charge donation on the reactivity of UO2+ with respect to water and dioxygen. The original hypothesis that addition of O2 is enhanced by strong s-donor ligands bound to UO2+ is supported by results from competitive collision-induced dissociation (CID) experiments, which show near exclusive loss of H2O from [UO2(dmso)(H2O)(O2)]+, whereas both H2O and O2 are eliminated from the corresponding [UO2(aco)(H2O)(O2)]+ species. Ligand-addition reaction rates were investigated by monitoring precursor and product ion intensities as a function of ion storage time in the ion-trap mass spectrometer: these experiments suggest that the association of dioxygen to the UO2+ complex is enhanced when the more basic dmso ligand was coordinated to the metal complex. Conversely, addition of H2O is favored for the analogous complex ion that contains an aco ligand. Experimental rate measurements are supported by density function theory calculations of relative energies, which show stronger bonds between UO2+ and O2 when dmso is the coordinating ligand, whereas bonds to H2O are stronger for the aco complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effects of Oxide Supports on the Low Temperature Hydrogenation Activity of Acetone over Pt/Ni Bimetallic Catalysts on SiO2 gamma-Al2O3 and TiO2

Low temperature (308 K) hydrogenation of acetone was used as a probe reaction to investigate the support effect on the hydrogenation activity of Pt/Ni bimetallic catalysts supported on TiO{sub 2}, SiO{sub 2} and {gamma}-Al{sub 2}O{sub 3}. The oxide supports significantly affected the catalytic properties of Pt/Ni catalysts, in which Pt/Ni/SiO2 bimetallic catalysts exhibited significantly higher activity than the other two bimetallic catalysts. TEM measurements revealed that the three supported Pt/Ni bimetallic catalysts have similar particle size distribution, while CO chemisorption measurements showed very different chemisorption capacity. Extended X-Ray absorption fine structure (EXAFS) measurements of the Pt L{sub III}-edge indicated that Pt atoms were fully reduced and the Pt-Ni bimetallic bonds were formed on all three catalysts. The extent of Pt-Ni bond formation followed the trend of SiO{sub 2} > {gamma}-Al{sub 2}O{sub 3} > TiO{sub 2}, which correlated very well with the hydrogenation activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Coadsorbed Water on the Photodecomposition of Acetone on TiO2(110)

The influence of coadsorbed water on the photodecomposition of acetone on TiO2 was examined using temperature programmed desorption (TPD) and the rutile TiO2(110) surface as a model photocatalyst. Of the two major influences ascribed to water in the heterogeneous photocatalysis literature (promotion via OH radical supply and inhibition due to site blocking), only the negative influence of water was observed. As long as the total water and acetone coverage was maintained well below the first layer saturation coverage (‘1 ML’), little inhibition of acetone photodecomposition was observed. However, as the total water+acetone coverage exceeded 1 ML, acetone was preferentially displaced from the first layer to physisorbed states by water and the extent of acetone photodecomposition attenuated. The displacement originated from water compressing acetone into high coverage regions where increased acetone-acetone repulsions caused displacement from the first layer. The immediate product of acetone photodecomposition was adsorbed acetate, which occupies twice as many surface sites per molecule as compared to acetone. Since the acetate intermediate was more stable on the TiO2(110) surface than either water or acetone (as gauged by TPD) and since its photodecomposition rate was less than that of acetone, additional surface sites were not opened up during acetone photodecomposition for previously displaced acetone molecules to re-enter the first layer. Results in this study suggest that increased molecular-level repulsions between organic molecules brought about by increased water coverage are as influential in the inhibiting effect of water on photooxidation rates as are water-organic repulsions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site Competition During Coadsorption of Acetone with Methanol and Water on TiO2(110)

The competitive interaction between acetone and two solvent molecules (methanol and water) for surface sites on rutile TiO2(110) was studied using temperature programmed desorption (TPD). On a vacuum reduced TiO2(110) surface, which possessed ~5% oxygen vacancy sites, excess methanol displaced preadsorbed acetone molecules to weakly bound and physisorbed desorption states below 200 K, whereas acetone was stabilized to 250 K against displacement by methanol on an oxidized surface through formation of an acetone-diolate species. These behaviors of acetone differ from the competitive interactions between acetone and water in that acetone is less susceptible to displacement by water. Examination of acetone+methanol and acetone+water multilayer combinations shows that acetone is more compatible in water-ice films than in methanol-ice films, presumably because water has greater potential as a hydrogen-bond donor than does methanol. Acetone molecules displaced from the TiO2(110) surface by water are more likely to be retained in the near-surface region, having a greater opportunity to revisit the surface, than when methanol is used as a coadsorbate. This work was supported by the US Department of Energy Basic Energy Sciences' Chemical Sciences, Geosciences & Biosciences Division. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

10 SYNTHETIC FUELS↗

Development of a Sustainable Green Chemistry Platform for Production of Acetone and Downstream Drop-in Fuel and Commodity Products Directly From Biomass Syngas Via a Novel Energy Conserving Route in Engineered Acetogenic Bacteria

LanzaTech and Oak Ridge National Laboratory have developed and scaled up a process for sustainable production of acetone and downstream drop-in fuel and commodity products directly from biomass syngas via a novel energy conserving route in engineered acetogenic bacteria. This process offers a safer and more environmentally-friendly production method for acetone production than the current phenol-dependent method, and the product has significantly lower GHG emissions. The developed process offers a cost competitive route to Acetone and enables biofuels at or below DOE’s $3 gge target. In addition, it also provides an attractive biological alternative to traditional sugar-based ABE fermentation, by enabling utilization of non-food biomass resources as fermentation feedstocks. Challenges overcome: • By-products formation: Byproduct 2,3-butandiol and 3-hydroxybutyrate reduce yield and stability. Addressed by elimination of both pathways in our chassis acetone production strain. • Cost competitiveness: Addressed by developing an integrated acetone strain and eliminating by-products to increase yield and stability. Optimized co-selectivity and coproductivity of acetone and ethanol instead of titer, based on technoeconomic analysis. • Limited enzyme variety: Addressed by genome mining of over 300 industrial strains in LanzaTech collection, identifying unique enzyme sequences, and refactoring these unique enzyme variants through LanzaTech’s engineering platform. Resulted in over 10x improvement in acetone production from gas. • Continuous process (stability): Identified bottleneck through detailed omics studies, addressed by integration of the acetone pathway on the chromosome. • Novel process to scale up: Addressed by demonstrating stable acetone production in a 80- L pilot reactor, with acetone productivity and selectivity comparable to those observed under the same conditions in 2-L reactors. We have demonstrated stable acetone production for over 7 days at commercial target rate and selectivity in 2-L reactors and have piloted the process.

09 BIOMASS FUELS↗

Development of a Sustainable Green Chemistry Platform for Production of Acetone and Downstream Drop-in Fuel and Commodity Products directly from Biomass Syngas via a Novel Energy Conserving Route in Engineered Acetogenic Bacteria

LanzaTech and Oak Ridge National Laboratory have developed and scaled up a process for sustainable production of acetone and downstream drop-in fuel and commodity products directly from biomass syngas via a novel energy conserving route in engineered acetogenic bacteria. This process offers a safer and more environmentally-friendly production method for acetone production than the current phenol-dependent method, and the product has significantly lower GHG emissions. The developed process offers a cost competitive route to Acetone and enables biofuels at or below DOE’s $3/gge target. In addition, it also provides an attractive biological alternative to traditional sugar-based ABE fermentation, by enabling utilization of non-food biomass resources as fermentation feedstocks. Challenges overcome: (1) By-products formation: Byproduct 2,3-butanediol and 3-hydroxybutyrate reduce yield and stability. Addressed by elimination of both pathways in the chassis acetone production strain. (2) Cost competitiveness: Addressed by developing an integrated acetone strain and eliminating by-products to increase yield and stability. Optimized co-selectivity and co-productivity of acetone and ethanol, based on technoeconomic analysis. (3) Limited enzyme variety: Addressed by genome mining of over 300 industrial strains in LanzaTech collection, identifying unique enzyme sequences, and refactoring these unique enzyme variants through LanzaTech’s engineering platform. Resulted in over 10x improvement in acetone production from gas. (4) Continuous process (stability): Identified bottleneck through detailed omics studies, addressed by integration of the acetone pathway on the chromosome. (5) Novel process to scale up: Addressed by demonstrating stable acetone production in an 80-L pilot reactor, with acetone productivity and selectivity comparable to those observed under the same conditions in 2-L reactors. LanzaTech has demonstrated stable acetone production for over 7 days at commercial target rate and selectivity in a 2-L reactor and have piloted the process.

09 BIOMASS FUELS↗

Insights into acetone photochemistry on rutile TiO₂(110). 2. new photodesorption channel with CH₃ ejection along the surface normal

Angle-resolved photon stimulated desorption (PSD) combined with infrared reflection-adsorption spectroscopy and temperature programmed desorption reveal two distinct channels in the photochemistry of acetone on rutile TiO₂(110) surface. During UV irradiation of co-adsorbed oxygen and acetone molecules, methyl radicals (CH₃) are ejected in two different directions: i) normal to the surface and ii) off-normal at ~±66° to the surface normal in the azimuth (i.e. perpendicular to the rows of bridging oxygen and Ti atoms). Both components are relatively narrow and non-cosine, indicating non-thermal evolution of CH₃ radicals. The direction of the “off-normal” PSD component is consistent with orientation of the C–CH₃ bonds in the n²-acetone diolate—a photoactive form of acetone chemisorption on the oxidized TiO₂(110) surface proposed earlier from experimental and theoretical studies. The direction of the “normal” PSD component requires an orientation of a C–CH₃ bond which is not consistent with the n²-acetone diolate structure. The angular distribution of the CH₃ PSD depends on the acetone coverage. The “off-normal” PSD component dominates at lower acetone coverage (< 0.2 ML), but does not increase at higher coverages in accord with the acetone diolate peak intensity in the infrared reflection-absorption spectra. The “normal” PSD component grows with the acetone coverage up to 0.6 ML. The newly discovered “normal” PSD channel is tentatively assigned to a photo-produced n²- acetone enolate as a potential precursor based on the H/D exchange experiments

Environmental Molecular Sciences Laboratory↗

Mechanism for Acetone and Crotonaldehyde Production during Steam Reforming of Ethanol over La 0.7 Sr 0.3 MnO 3–x Perovskite: Evidence for a Shared C4 Aldol Addition Intermediate

Here a mechanistic study was conducted on the catalytic conversion of ethanol over La 0.7 Sr 0.3 MnO 3–x perovskite catalysts in the presence and absence of water. The study sought insights into the path of C–C coupling toward acetone and crotonaldehyde and also into clarifying whether the lack of previous reports of C–C coupling over La 0.7 Sr 0.3 MnO 3–x (100) could be due to a “pressure gap”. Several types of experiments were performed at 400–800 K: flow experiments with a torr range reactant gas flown over La 0.7 Sr 0.3 MnO 3–x powders; ultra-high vacuum experiments with continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample; and torr range continuous gas exposures to a La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample. When ethanol and water were flown over La 0.7 Sr 0.3 MnO 3–x powders at 400–800 K, the products detected were ethene, acetaldehyde, acetone, crotonaldehyde, CO, CO 2 , and H 2 . Acetone was catalytically produced over both the La 0.7 Sr 0.3 MnO 3–x powder and the La 0.7 Sr 0.3 MnO 3–x (100) single-crystal sample at temperatures of 700–800 K when reaction conditions were on the order of 1 Torr of reactant gas and with an excess of water relative to ethanol (1 ethanol/9 water). Isotopic labeling with deuterium was used to gain insights into the C–C coupling reaction mechanism and paths in species with three and four carbons (C 3 and C 4 species). Additionally, steady-state isotopic transient kinetic analysis (SSITKA) experiments + simulations using carbon labeling of the ethanol feed were performed. Three mechanistic paths were considered for the C–C coupling step: the first two paths, A and B, involve coupling between two intermediates which are both in oxygen vacancies; and the third path, C, involves coupling between one intermediate in an oxygen vacancy and one intermediate outside of an oxygen vacancy. The results suggest that the dominant path to the C 3 product, acetone, depends on the conditions. The less active path (attributed to path A or B) occurs at 600–700 K and involves coupling between two irreversibly bound species. The more active path (attributed to path C) requires an excess of water, becomes dominant at 600–800 K, and involves coupling between one irreversibly bound species and one reversibly bound species. Based on these various observations from experiments and simulations, an elementary step is proposed for acetone formation involving a previously unreported C 4 transition state that is formed after aldol addition. Density functional theory calculations were performed based on this hypothesis, and it confirmed that this specific and previously unreported aldol addition path to acetone does exist and that this path consistent with the experimental data. In this path, C–C formation occurs to create a C 4 intermediate that is bound to an oxygen vacancy, then a hydrogen transfer with C–C bond breaking occurs that results in the production of the acetone molecule. The proposed mechanism is also consistent with the experimental observation that acetone formation has a greater than first-order dependence on the water vapor pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗