Engineering PapersSearch

SEARCH · Engineering Papers

Results for “A ≥ 220”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Titan's Far-Infrared 220 cm(exp -1) Cloud Seen for the First Time in the South

In 2012 an emission feature at 220 cm(exp -1) in Titan's far-infrared spectrum was seen for the first time in the south. Attributed to a stratosphere ice cloud formed at the winter pole, the 220 (exp -1) emission had previously been seen only at high northern latitudes where it bad been decreasing since the arrival of Cassini in 2004. Our far-infrared observations were performed With the Composite Infrared Spectrometer (CIRS) on Caasini. Although it bad been expected that the 220 cm(exp -1) emission would eventnal1y appear in the south, the emission appeared rather suddenly, increasing by a factor of at least four between February (when it was not detected) and July 2012. At the time of our observations, one Titan month after equinox, the 220 cm(exp -1) feature was present in both the north and south and showed a trend of continued slow decrease in the north and steep increase in the south. As has been the case in the north, the emission in the south was confined to high latitudes associated with winter polar shadowing. Our spectroscopic detection of the southern 220 cm(exp -1) ice cloud coincided with the rapid formation in 2012 of a haze hood and vortex at the south pole as seen in Cassini image. The 220 cm(exp -1) feature was first observed by the Infrared Interferometer Spectrometer (IRIS) on Voyager I and has been extensively studied in the north by CIRS. Until now the 220 cm(exp -1) emission, like the polar hood, has been associated solely with the north, owing to the fact that Voyager and Cassini have viewed Titan only during winter-spring. In 2012 we witnessed the start of a seasonal shift of this pattern to the south. The 220 cm(exp -1) emission arises from altitudes of 80-150 km and peaks sharply near 140 km. The material responsible for the spectral feature is not known, but indirect evidence hints at a condensate arising from complex nitriles, which also tend to be present only at high winter latitudes.

Jennings, Donald

Ground-based 1- to 32-microns observations of ARP 220: Evidence for a dust-embedded AGN?

New observations of the 10 and 20 micron size of the emission region in Arp 220 are presented. Also given are ground based photometry from 1 to 32 micron including measurements of the strength of the silicate feature at 10 micron. The results show that the 20 micron size of Arp is smaller than 1.5 arcsec (500 pc); comparison of IRAS and ground based observations show that IRAS 12 micron flux measured with a large arcmin beam is the same as that seen from the ground with a 3 arcsec aperture. At 10 micron a deep silicate absorption feature is seen that corresponds to a visual extinction of about 50 mag. These results suggest that a very significant portion of the 10 to the 12th power L sub 0 infrared luminosity from Arp 220 comes from a region less than or of the order of 500 pc in diameter. When these results are combined with recent measurement of a broad Brackett alpha line by DePoy and an unresolved 2.2 micron source by Neugebauer, Matthews and Scoville, a very attractive possibility for the primary luminosity source Arp 220 is a dust embedded compact Seyfert type nucleus.

Becklin, E. E.

Near-infrared (Fe II) and Pa Beta imaging and spectroscopy of Arp 220

We have imaged the ultraluminous infrared galaxy Arp 220 in light of the near-infrared (Fe II) 1.257 micron and Pa-beta lines, and have obtained spectra in the J- and H-band atmospheric windows. Arp 220 is a strong source of (Fe II) and Pa-beta emission, with luminosities of 1.3 x 10(exp 41) and 9.2 x 10(exp 40) ergs/s, respectively. The (Fe II) and Pa-beta emission are both extended over the central 2 sec-3 sec, but with different morphologies. We suggest that the extended (Fe II) emission is produced through the interaction of fast shocks with ambient gas in the interstellar medium (ISM) at the base of the outflowing, supernovae-driven superwind mapped by Heckman et al. (1987). The bolometric luminosity of the starburst required to power this wind is estimated to be at least 2 x 10(exp 11) solar luminosity. If the spatially unresolved (Fe II) emission is produced via a large number of supernova remnants, the implied rate is approximately 0.6/yr. The overall luminosity of such a starburst could account for a large fraction (1/2-1/3) of the Arp 220 energy budget, but the large deficit of ionizing photons (as counted by the Pa-beta luminosity) requires that the starburst be rapidly declining and/or have a low upper mass cutoff. Alternatively, dust may effectively compete with the gas for ionizing photons, or much of the ionizing radiation may escape through 'holes' in the ISM. It is also possible that a buried active galactic nuclei (AGN) produces a large fraction of the unresolved (Fe II) and Pa-beta emission. We briefly discuss these possibilities in light of these new imaging and spectroscopic data.

Armus, L.

Equipment for On-Wafer Testing From 220 to 325 GHz

A system of electronic instrumentation, constituting the equivalent of a two-port vector network analyzer, has been developed for use in on-wafer measurement of key electrical characteristics of semiconductor devices at frequencies from 220 to 325 GHz. A prior system designed according to similar principles was reported in Equipment for On-Wafer Testing at Frequencies Up to 220 GHz (NPO-20760), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 42. As one would expect, a major source of difficulty in progressing to the present higher-frequency-range system was the need for greater mechanical precision as wavelengths shorten into the millimeter range, approaching the scale of mechanical tolerances of prior systems. The system (see figure) includes both commercial off-the-shelf and custom equipment. As in the system of the cited prior article, the equipment includes test sets that are extended versions of commercial network analyzers that function in a lower frequency range. The extension to the higher frequency range is accomplished by use of custom frequency-extension modules that contain frequency multipliers and harmonic mixers. On-wafer measurement is made possible by waveguide wafer probes that were custom designed and built for this wavelength range, plus an on-wafer calibration substrate designed for use with these probes. In this case, the calibration substrate was specially fabricated by laser milling. The system was used to make the first on-wafer measurements of a semiconductor device in the frequency range from 220 to 320 GHz. Some of the measurement results showed that the device had gain.

Samoska, Lorene

Nuclear Structure and Decay Data for A=220 Isobars

Here, this work presents a comprehensive and critical evaluation of experimental nuclear spectroscopic data from reactions and decays for all 11 known nuclides with mass number A=220 (Pb, Bi, Po, At, Rn, Fr, Ra, Ac, Th, Pa, and Np). Recommended values are produced for level energies, spins and parities, half-lives, and radiation properties including energies, branching ratios, and multipolarities of γ rays, as well as characteristics of β and α radiation decays, based on all available experimental data. This work supersedes previous A=220 evaluations: 2011Br05, 1997Ar04, 1986Ma45, 1976El04.

Chen, J. [Michigan State University, East Lansing,

Average flow between about 70 and 220 earth radii in the geomagnetic tail

A detailed statistical analysis is made of the flow magnitude and direction in the geomagnetic tail between about 70 and 220 earth radii derived from suprathermal protons measured with the ultra-low energy charge analyzer on the ISEE-3 spacecraft. It is found that the average tailward flow velocity between 203 and 220 earth radii is 567 km/s, and earthward flow occurs in less than 1 percent of all the cases. At a radial distance of 117 and 153 earth radii, the result is similar: the average tailward flow velocity is 665 km/s, and the earthward flow occurs in less than 6 percent of all measurements. In contrast, at radial distances of 61 to 76 earth radii, equal probability for earthbound and tailward flow has been found, and average flow velocities are 336 km/s in both directions. These results indicate that magnetic neutral lines rarely move or form beyond about 100 earth radii.

Scholer, M.

The remarkable infrared galaxy Arp 220 = IC 4553

IRAS observations of the peculiar galaxy Arp 220 = IC 4553 show that it is extremely luminous in the far-infrared, with a total luminosity of 2 x 10 to the 12th solar luminosities. The infrared-to-blue luminosity ratio of this galaxy is about 80, which is the largest value of the ratio for galaxies in the UGC catalog, and places it in the range of the 'unidentified' infrared sources recently reported by Houck et al. in the IRAS all-sky survey. Other observations of Arp 220, combined with the luminosity in the infrared, allow either a Seyfert-like or starburst origin for this luminosity.

Soifer, B. T.

Interferometric CO observations of the ultraluminous IRAS galaxies ARP 220, IC 694/NGC 3690, NGC 6420 and NGC 7469

High resolution CO observations of the IRAS galaxies Arp 220, IC 694/NGC 3690, NGC 6240 and NGC 7469 were made with the Millimeter Wave Interferometer of the Owen Valley Radio Observatory. These yield spatial information on scales of 1 to 5 kpc and allow the separation of compact condensations from the more extended emission in the galaxies. In the case of the obviously interacting system IC 694/NGC 3690 the contributions of each component can be discerned. For that galaxy, and also for Arp 220, the unusually high lumonisities may be produced by nonthermal processes rather than by intense bursts of star formation.

Sargent, A. I.

The far-infrared and optical structure of Arp 220

The spatial structure of the luminous peculiar galaxy Arp 220 has been investigated in the far infrared. The results reveal that most of the luminosity is from a source less than 3 kpc in extent, located in the nuclear region of the galaxy. The size constraints yield a lower limit of 0.05 for the 100 micron optical depth, implying a hydrogen column density over 5 x 10 to the 22nd/sq cm. New optical images confirm that the double-lobed optical appearance results from strong absorption across the true nucleus. Arp 220 exhibits three primary features which provide strong evidence for an external source of energy: (1) a chaotic and highly asymmetric galactic halo; (2) a large internal velocity dispersion in CO and H I; and (3) extreme compression of gas and dust. These features are natural consequences of previously proposed models which invoke a direct galactic collision and merger, and are unlikely to result from a long-range tidal interaction with the neighboring galaxy IC 4554.

Joy, M.

Analysis of an extended period of earthward plasma sheet flow at about 220 R(E) - CDAW 8

The interpretation of the ISEE 3 earthward flow events observed during an extended period on January 29, 1983 is addressed in terms of a neutral line moving beyond roughly 220 earth radii. This concept was tested for consistency with current magnetospheric and solar wind observations. A broad range of additional data including Dynamics Explorer auroral imaging and a wide variety of ground-based measurements from the eighth Coordinated Data Analysis Workshop (CDAW 8) was available. The distant neutral line location within the context of the distant tail, geostationary orbit, auroral zone, and associated solar wind data is analyzed, based on an extended version of the Coraniti and Kennel (1972) flaring tail theory. It is concluded, from known solar wind conditions that, for a typical neutral line location at about 135 earth radii, an increase of about 30 percent of the near-earth lobe field strength would be required to cause the distant neutral line to move tailward beyond 220 earth radii. The question of why substorms did not terminate the growth phase earlier is also addressed.

Schindler, K.

Mid-infrared imaging of Markarian 231 and Arp 220

High angular resolution observations of Arp 220 and Mrk 231 provide images of the nuclei and show that the source of the strong mid-IR emission is confined to regions less than about 0.5 arcsec or 400 pc in diameter in Mrk 231 and less than 1.5 arcsec x 0.9 arcsec or 320 x 530 pc in Arp 220. If much of the far-IR emission also derives from such a small region, the implied radiation densities are quite high, equivalent to one O star per cu pc. Although in normal galaxies the near-IR traces an older population of evolved, cool stars, such high radiation densities in the IR bright galaxies suggest the possibility that the spatial correlation observed between the near-IR, mid-IR, and radio may hold because emission in all three bands is associated with hot interstellar gas and dust.

Keto, Eric

OSSE observations of the ultraluminous infrared galaxies ARP 220 and MRK 273

The results of oriented scintillation spectrometer experiment (OSSE) observations of the ultraluminous infrared galaxies Arp 220 and Mrk 273 are reported. The pointings of Arp 220 and Mrk 273 concentrated on their upper limits. The gamma ray luminosities from these sources were found to be between one and two orders of magnitude smaller than the infrared luminosities. Multiwavelength luminosity spectra are produced from the radio to the gamma ray regime, and are compared with the typical multiwavelength spectra of active galactic nuclei. The lack of measured gamma ray emission provides no evidence for the existence of buried active galactic nuclei in these ultraluminous infrared galaxies, but is consistent with an origin of the infrared luminosity from starburst activity.

Dermer, C. D.

Implications of the ISO LWS spectrum of the prototypical ultraluminous galaxy: ARP 220

The low resolution far infrared spectrum of the galaxy Arp 220, obtained with the low wavelength spectrometer (LWS) onboard the Infrared Space Observatory (ISO), is presented. The spectrum is dominated by the OH, H2O, CH, NH3 and O I absorption lines. The upper limits on the far infrared fine structure lines indicate a softer radiation in Arp 220 than in starburst galaxies.

Fischer, J.

Chandra Observations of Extended X-Ray Emission in ARP 220

We resolve the extended X-ray emission from the prototypical ultraluminous infrared galaxy Arp 220. Extended, faint, edge-brightened, soft X-ray lobes outside the optical galaxy are observed to a distance of 1CL 15 kpc on each side of the nuclear region. Bright plumes inside the optical isophotes coincide with the optical line emission and extend 1 1 kpc from end to end across the nucleus. The data for the plumes cannot be fitted by a single-temperature plasma and display a range of temperatures from 0.2 to 1 keV. The plumes emerge from bright, diffuse circumnuclear emission in the inner 3 kpc centered on the Ha peak, which is displaced from the radio nuclei. There is a close morphological correspondence between the Ha and soft X-ray emission on all spatial scales. We interpret the plumes as a starburst-driven superwind and discuss two interpretations of the emission from the lobes in the context of simulations of the merger dynamics of Arp 220.

McDowell, J. C.

Characterization Testing of Lockheed Martin Micro1-2 Cryocoolers Optimized for 220 K Environment

The Mapping Imaging Spectrometer for Europa (MISE) Instrument on the Europa Clipper mission has baselined a Lockheed Martin high-power Micro1-2 pulse tube cryocooler operating at 135 Hz with a 220 K heat rejection temperature. This paper describes the testing and results of two Lockheed Martin Micro1-2 coolers optimized for these conditions. The thermal performance of the microcoolers was measured in vacuum for heat reject temperatures between 220 and 230 K. The coolers were operated with input powers ranging from 5 W to 40 W and drive frequency between 125 Hz and 145 Hz. The optimal drive frequency was strongly dependent on heat reject temperature. In addition, the exported forces and torques of the coolers were measured at 300 K heat rejection for input powers ranging from 5 W to 60 W and drive frequency between 120 Hz and 160 Hz. The exported forces were dependent on both piston amplitude and drive frequency. Moreover, the following were measured on one of the coolers: DC and AC magnetic fields at various locations, the off-state conductance of the pulse tube, and the effect of inclination angle of the pulse tube relative to gravity on the performance of the cooler. Finally, one of the coolers was subjected to random vibration testing.

Rodriguez, J.I.

A 220-GHz InP HEMT Direct Detection Polarimeter

In this article, a 220-GHz direct detection polarimetric receiver is reported. This polarimetric receiver is intended for sensing of the microphysical properties of cloud ice in the earth's upper atmosphere. In the article, we report the measured RF performance, including RF gain of approximately 35 dB per channel and integrated noise figure of the receiver. The noise figure is measured to be 5.1 dB for the horizontally polarized channel and 5.4 dB for the vertically polarized channel. The receiver measures only 1.8 cm × 3.0 cm × 6.4 cm and has a total regulated dc power consumption of 520 mW. This article represents the first 220-GHz polarimetric direct detection receiver and is enabled by an advanced 25-nm indium phosphide (InP) HEMT monolithic microwave integrated circuit (MMIC) technology.

Indium phosphide (InP)