Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “2-meter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Water depth estimation with ERTS-1 imagery

Contrast-enhanced 9.5 inch ERTS-1 images were produced for an investigation on ocean water color. Such images lend themselves to water depth estimation by photographic and electronic density contouring. MSS-4 and -5 images of the Great Bahama Bank were density sliced by both methods. Correlation was found between the MSS-4 image and a hydrographic chart at 1:467,000 scale, in a number of areas corresponding to water depth of less than 2 meters, 5 to 10 meters and 10 to about 20 meters. The MSS-5 image was restricted to depths of about 2 meters. Where reflective bottom and clear water are found, ERTS-1 MSS-4 images can be used with density contouring by electronic or photographic methods for estimating depths to 5 meters within about one meter.

Ross, D. S.↗
NASA NTRS1972

Precision geodesy via radio interferometry.

Very-long-baseline interferometry experiments, involving observations of extragalactic radio sources, were performed in 1969 to determine the vector separations between antenna sites in Massachusetts and West Virginia. The 845.130-kilometer baseline was estimated from two separate experiments. The results agreed with each other to within 2 meters in all three components and with a special geodetic survey to within 2 meters in length; the differences in baseline direction as determined by the survey and by interferometry corresponded to discrepancies of about 5 meters. The experiments also yielded positions for nine extragalactic radio sources and allowed the hydrogen maser clocks at the two sites to be synchronized.

Hinteregger, H. F.↗
NASA NTRS1972

Gravimetric geodesy and sea surface topography studies by means of satellite-to-satellite tracking and satellite altimetry

A satellite-to-satellite tracking experiment is planned between ATS-F and GEOS-C with a range accuracy of 2-meters and a range rate accuracy of 0.035 centimeters per second for a 10-second integration time. This experiment is planned for 1974. It is anticipated that it will improve the spatial resolution of the satellite geoid by half an order of magnitude to about 6 degrees. Longer integration times should also permit a modest increase in the acceleration resolution. Satellite altimeter data will also be obtained by means of GEOS-C. An overall accuracy of 5-meters in altitude is the goal. The altimeter, per se, is expected to have an instrumental precision of about 2 meters, and an additional capability to observe with a precision of about 0.2 meters for limited periods.

Siry, J. W.↗
NASA NTRS1972

An integral test of the inelastic cross sections of Pb and Mo using measured neutron spectra

Comparison of measurements and calculations of fast neutron spectra from a radioactive neutron source inside spheres of Mo or Pb and from a cylindrical reactor containing a thick Pb or Mo reflector are used as a test of ENDF cross sections. The sphere leakage spectra were measured at a sphere-to-spectrometer distance of 2 meters using a 54 Ci spherical Am-Be neutron source. Reactor leakage spectrum measurements were made at the surface of the ZP-1 reactor when bare, with a Pb radial reflector 21 cm thick, and with a metallic Mo radial reflector 10 cm thick. In the case of the thin Mo sphere there is agreement between the calculation and measurement. The Pb calculation is much lower than the measurement except at the highest neutron energy. Two-dimensional calculations of reactor spectra result indicate that the reactor source is reasonably well known. Significant differences in leakage spectrum shape for both Mo and Pb reflectors suggest that there are large uncertainties in the inelastic cross sections for Pb and some for Mo.

Shook, D. F.↗
NASA NTRS1973

Real time optical figure sensor

Mirrors produced for various optical systems require precise surface finishing. Sensor, developed for measuring mirror surface, is compensated for interferences from temperature and air disturbances and is capable of measuring mirrors with diameters of up to 2 meters.

Robertson, H. J.↗
NASA NTRS1972

Smoothing of functions of range and range rate measurements from earth orbiting satellites

It is shown that for satellites in circular Earth orbits with altitudes of 500 kilometers to 1500 kilometers, and for satellites in elliptical orbits with an approximate 4000 kilometer height of perigee, a high degree least squares polynomial (e.g., a 9th or 10th degree in some cases) is required to smooth both range and range rate data for purposes of input to orbit determination programs. In order to circumvent this problem, functions of range and range rate are smoothed with lower degree least squares polynomials (e.g., 3rd and 4th degree) and it is shown that under the above geometric constraints the standard deviation of fit can be reduced to levels commensurate with typical S-band tracking system resolution which is 1 to 2 meters in range and 0.005 meters/second in range rate for a 1 per second data rate. Also shown are the effects of Gaussian random noise, biases, and periodic noise. This analysis includes numerous examples applied to the 44 point data smoothing interval currently used in much of the operational preprocessing at the Goddard Space Flight Center.

Grenchik, T. J.↗
NASA NTRS1973

Analysis of test data film generated by the lunar sounder (S-209)

The analysis of test films pertaining to the readiness of the Apollo 17 radar equipment is discussed. Emphasis is placed on the evaluation of the lunar sounder equipment. The lunar sounder experiment was to examine the lunar surface at three different radar frequencies of 2 meters, 60 meters, and 20 meters. Test films were made on the lunar sounder system to describe the purpose of the test, to describe the experiments used for analysis, and to provide conclusions reached after analysis.

Massey, N.↗
NASA NTRS1972

Geodetic satellite observations in North American (solution NA-9)

A new detailed geoidal map with claimed accuracies of plus or minus 2 meters (on land), based on gravimetric and satellite data, was presented. With the new geoid and the orthometric heights given, more reliable height constraints were calculated and applied. The basic purpose of this experiment was to compute the new solution NA9 by defining the origin of the system, from the point of view of error propagation, in the most favorable position applying inner constraints and imposing new weighted height constraints to all of the stations. The major differences with respect to formerly published adjustments are presented.

Mueller, I. I.↗
NASA NTRS1972

A detailed gravimetric geoid of North America, Eurasia, and Australia

A detailed gravimetric geoid of North America, the North Atlantic, Eurasia, and Australia computed from a combination of satellite-derived and surface 1 x 1 gravity data, is presented. Using a consistent set of parameters, this geoid is referenced to an absolute datum. The precision of this detailed geoid is + or - 2 meters in the continents but may be in the range of 5 to 7 meters in those areas where data was sparse. Comparisons of the detailed gravimetric geoid with results of Rice for the United States, Bomford and Fischer in Eurasia, and Mather in Australia are presented. Comparisons are also presented with geoid heights from satellite solutions for geocentric station coordinates in North America, the Caribbean, Europe, and Australia.

Vincent, S.↗
NASA NTRS1973

Ocean water color assessment from ERTS-1 RBV and MSS imagery

The author has identified the following significant results. Photo-optical and electronic density slicing were applied to ERTS-1 E 1007-151651-4, 30 July 1972, an area in the Caribbean showing deep ocean water, and shallow areas on the Great Baham Bank ranging from 0.5 meter or less to 18 meters. The density slicing processes were adjusted to correlate water radiance to bathmetric contours shown on C and GS Chart 1112. A number of large areas corresponding to water depths of 2 meters or less, 5 to 10 meters, and 10 to about 20 meters were isolated by both processes. Where clear water and uniformly reflective bottom was found, clear of marine growths, the photo-optical and electronic image density slicing processes proved effective in delineating areas where the depth was in the order of 5 meters, plus or minus 1 meter.

Ross, D. S.↗
NASA NTRS1973

Principal sources and dispersal patterns of suspended particulate matter in nearshore surface waters of the northeast Pacific Ocean and the Hawaiian Islands

The author has identified the following significant results. ERTS-1 green and red band imagery supplemented by U-2 photographs provides synoptic views of turbid, nearshore, near-surface bodies of water which adds to the body of knowledge about the coastal ocean necessary for a thorough understanding of the dynamic environment. Tubidity and suspended sediment measurements made in the Gulf of the Farallones correlate well with water tonal patterns visible on satellite imagery. Three successively seaward zones of turbid water could be delineated. Secchi disc visibility tests were the most definitive, ranging from or = 2 meters in the main plume, to almost 3 meters in the second zone of turbid water, to 4 meters in the furthest seaward zone of turbid water measured. These variations in water clarity were reinforced by suspended sediment concentrations which ranged from 26-28 mg/1, to 20-24 mg/1, to 11-15 mg/1, respectively, in each of the three masses of water. Transmissiometer readings were basically in agreement with the suspended sediment and Secchi disc values measured. Satellite imagery and U-2 photographs of the California coastal zone taken early in April 1973 show numerous plumes of suspended sediment being deflected southward. This indicates a southward flow of the nearshore, near-surface waters, a reversal from that noted in January 1973.

Carlson, P. R.↗
NASA NTRS1972

Tracking-station coordinates from Geos 1 and Geos 2 optical flash data.

Center-of-mass coordinates for 28 NASA MOTS and SAO Baker-Nunn camera sites have been obtained from optical flash data from Geos 1 (1965 89A) and Geos 2 (1968 002A). More than 25,000 observations in about 100 two-day arcs were used in dynamical solutions (SAO 1969 AGU gravity model). Comparison of results with local survey solutions and with solutions from deep-space vehicle tracking suggests accuracy of about 2 meters in longitude and height and 5 meters in latitude. The relatively larger error in latitude arose from propagation of gravity-model error largely along the track of these high-inclination satellites. The results have also been compared with the solutions of the SAO 1969 standard earth for station coordinates on the North American datum. The solution obtained in the present work is much closer to the survey results in chord length between stations.

Marsh, J. G.↗
NASA NTRS1972

Detailed gravimetric geoid for the United States.

A detailed gravimetric geoid was computed for the United States using a combination of satellite-derived spherical harmonic coefficients and 1 by 1 deg mean gravity values from surface gravimetry. Comparisons of this geoid with astrogeodetic geoid data indicate that a precision of plus or minus 2 meters has been obtained. Translations only were used to convert the NAD astrogeodetic geoid heights to geocentric astrogeodetic heights. On the basis of the agreement between the geocentric astrogeodetic geoid heights and the gravimetric geoid heights, no evidence is found for rotation in the North American datum. The value of the zero-order undulation can vary by 10 to 20 meters, depending on which investigator's station positions are used to establish it.

Strange, W. E.↗
NASA NTRS1972

Rapid global geoid mapping with satellite altimetry.

Theoretical demonstration of the feasibility to build, fly, calibrate, and evaluate an orbiting altimeter system that is to offer the basis for accurate geoidal mapping on a global scale. The problems involved in instrumentation and orbit determination are discussed. Following a description of the Skylab altimeter characteristics, a more advanced design is postulated. This new design is shown to be capable of an accuracy of better than 50 cm and noise levels of 20 cm. With proper premission analysis and careful scheduling, a global geoidal map of 1- to 2-meter resolution can be obtained within an 18- to 20-day period by using a high-inclination orbit.

Stanley, H. R.↗
NASA NTRS1973

Detailed geoid computations for GEOS-C altimeter experiment areas

The GEOS-C spacecraft is scheduled to carry onboard a radar altimeter for the purpose of measuring the geoid undulations in oceanic areas. An independently derived geoid map will provide a valuable complement to these experiments. A detailed gravimetric geoid is presented for the Atlantic and northeast Pacific Ocean areas based upon a combination of the Goddard Space Flight Center GEM-6 earth model and surface 1 deg x 1 deg gravity data. As part of this work a number of satellite derived gravity models were evaluated to establish the model which best represented the long wave length features of the geoid in the above mentioned area. Comparisons of the detailed geoid with the astrogeodetic data provided by the National Ocean Survey and dynamically derived tracking station heights indicate that the accuracy of this combined geoid is on the order of 2 meters or better where data was dense and 5 to 7 meters where data was less dense.

Marsh, J. G.↗
NASA NTRS1973

Global detailed gravimetric geoid

A global detailed gravimetric geoid has been computed by combining the Goddard Space Flight Center GEM-4 gravity model derived from satellite and surface gravity data and surface 1 deg-by-1 deg mean free air gravity anomaly data. The accuracy of the geoid is + or - 2 meters on continents, 5 to 7 meters in areas where surface gravity data are sparse, and 10 to 15 meters in areas where no surface gravity data are available. Comparisons have been made with the astrogeodetic data provided by Rice (United States), Bomford (Europe), and Mather (Australia). Comparisons have also been carried out with geoid heights derived from satellite solutions for geocentric station coordinates in North America, the Caribbean, Europe, and Australia.

Vincent, S.↗
NASA NTRS1973

Development of a process for producing ribbon shaped filaments

Silicon carbide (SiC) ribbon filaments were produced on a carbon ribbon substrate, about 1500 microns (60 mils) wide and 100 microns (4 mils) thick in lengths up to 2 meters (6 ft), and with tensile strengths up to 142 KN/cm sq (206 Ksi). During the course of the study, ribbon filaments of boron were also produced on the carbon ribbon substrate; the boron ribbon produced was extremely fragile. The tensile strength of the SiC ribbon was limited by large growths or flaws caused by anomalies at the substrate surface; these anomalies were either foreign dirt or substrate imperfections or both. Related work carried out on round 100 micron (4 mils) diameter SiC filaments on a 33 micron (1.3 mil) diameter, very smooth carbon monofilament substrate has shown that tensile strengths as high as 551 KN/cm sq (800 Ksi) are obtainable with the SiC-carbon round substrate combination, and indicates that if the ribbon substrate surface and ribbon deposition process can be improved similar strengths can be realizable. Cost analysis shows that 100 micron x 5-10 micron SiC ribbon can be very low cost reinforcement material.

Debolt, H. E.↗
NASA NTRS1973

Test of LOX compatibility for asphalt and concrete runway materials

A literature survey and a telephone canvass of producers and users of LOX is reported which yielded one report of an accident resulting from a LOX spill on asphalt, one discussion of hazardous conditions, and an unreferenced mention of an incident. Laboratory tests using standard LOX impact apparatus yielded reactions with both old and new alphalt, but none with concrete. In the final test, using a larger sample of asphalt, the reaction caused extensive damage to equipment. Initial field experiments using 2-meter square asphalt slabs covered with LOX, conducted during rainy weather, achieved no reaction with plummets, and limited reaction with a blasting cap as a reaction initiator. In a final plummet-initiated test on a dry slab, a violent reaction, which appeared to have propagated over the entire slab surface, destroyed the plummet fixture and threw fragments as far as 48 meters.

Moyers, C. V.↗