Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Seismic Responses of Shot Span Bridge under Three Different Patterns of Earthquake Excitations

This paper presents a study of the influence of three different types of seismic input methods on the longitudinal seismic response of a short, three-span, variable cross-section, reinforced concrete bridge. Research progress of the seismic model is introduced briefly. Finite element model is created for the bridge and time history analysis conducted. Three different types of illustrative excitations are considered: 1) the EI-Centro seismic wave is used as uniform excitations at all bridge supports; 2) fixed apparent wave velocity is used for response analysis of traveling wave excitations on the bridge; 3) conforming to a selected coherency model, the multiple seismic excitation time histories considering spatially variable effects are generated. The contrast study of the response analysis result under the three different seismic excitations is conducted and the influence of different seismic input methods is studied. The comparative analysis of the bridge model shows that the uniform ground motion input can not provide conservative seismic demands-in a number of cases it results in lower response than that predicted by multiple seismic excitations. The result of uniform excitation and traveling wave excitation shows very small difference. Consequently, multiple seismic excitations needs to be applied at the bridge supports for response analysis of short span bridge.

58 GEOSCIENCES↗

Microwave N{sub 2}-Ar plasma torch. II. Experiment and comparison with theory

Spatially resolved emission spectroscopy techniques have been used to determine the gas temperature, the electron, and N{sub 2}{sup +} ion densities and the relative emission intensities of radiative species in a microwave (2.45 GHz) plasma torch driven by a surface wave. The experimental results have been analyzed in terms of a two-dimensional theoretical model based on a self-consistent treatment of particles kinetics, gas dynamics, and wave electrodynamics. The measured spatial variations in the various quantities agree well with the model predictions. The radially averaged gas temperature is around 3000 K and varies only slowly along the discharge zone of the source but it drops sharply down to about 400 K in the postdischarge. The experimental wave dispersion characteristics nearly follow the theoretical ones, thus confirming that this plasma source is driven by a surface wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

River Devices to Recover Energy with Advanced Materials: River DREAM

The purpose of this project is to develop a generator called a Galloping Hydroelectric Energy Extraction Device (GHEED). It uses a galloping prism to convert water flow into linear motion. This motion is converted into electricity via a dielectric elastomer generator (DEG). The galloping mechanism and the DEG are combined to create a system to effectively generate electricity. This project has three research objectives: 1. Oscillator development and design a. Characterize galloping behavior, evaluate control surface shape change on oscillator performance and demonstrate shape change with water flow change. 2. Dielectric Energy Generator (DEG) characterization and modeling a. Characterize and model the performance of the DEG based on oscillator design 3. Galloping Hydroelectric Energy Extraction Device (GHEED) system modeling and integration a. Create numerical models for construction of a system performance model and define operating capabilities for this approach Accomplishing these three objectives will result in the creation of a model that can be used to fully define the operating parameters and performance capabilities of a generator based on the GHEED design. This information will be used in the next phase of product development, the creation of an integrated laboratory scale generator to confirm model predictions.

16 TIDAL AND WAVE POWER↗

Effect of flow on the acoustic performance of extended reaction lined ducts

A model is developed for the effects of uniform and boundary-layer mean flow on the attenuation and propagation of harmonically excited sound waves in an extended reaction lined cylindrical duct. A duct geometry consisting of an annular outer region of bulk material surrounding an inner cylinder of air is utilized. A numerical solution is obtained for the coupled wave equations governing the motion of the sound in both the inner and annular regions. It is found that the numerically predicted attenuation and propagations constants are in excellent agreement with measured values using Kevlar as the liner material for plane-wave mode (O,O) excitation over a wide range of mean flows and sound frequency. The boundary-layer effects are determined to be unimportant, at least for plane-wave sound. In addition, numerical studies indicate small differences between the use of either the radial velocity or the radial displacement boundary conditions.

Hersh, A. S.↗

Disturbance-wave interactions in flows with crossflow

The leading-edge region of swept wings is dominated by the crossflow instability, resulting in vortices that all rotate in the same sense. The effect of these possibly unsteady vortices on the behavior of other disturbances is examined, and a strong interaction between these and disturbances of half the dominating crossflow wavelength is predicted. According to theory, the interaction is of crossflow-crossflow type. The effect explains the anomalies found in the experimental observations of Saric and Yeates. Visually, they observe vortices at the wavelength predicted by linear theory; however, in their hot-wire measurements they find that the superharmonic dominates disturbance growth, eventually having three times the amplitude of the primary wave. In this case, the usual transition prediction methods would fail, clearly indicating the importance of studying interactions of this sort.

Reed, H. L.↗

The detection of global convective wave flows on the Sun

Global convective flows in the solar convection zone have been predicted by theoretical interpretations of the global-scale ordering of magnetic fields and activity centers and by theoretical analyses of rotating convection zones. Direct evidence of these flows in the photosphere has not previously been found despite several long-term efforts. The signatures of such flows have now been detected by analyzing the daily series of low-resolution Dopplergrams obtained at the Wilcox Solar Observatory at Stanford University. The signatures are patterns of alternating east and west flows with amplitudes on the order of 25 m/s and longitudinal extent of about 30 degrees. The patterns move across the disc at approximately the solar rotation rate and have lifetimes of at least several rotations. Boundaries of the fast and slow flows are often associated with large magnetic active regions.

Scherrer, P. H.↗

The detection of global convective wave flows on the sun

Global convective flows in the solar convection zone have been predicted by theoretical interpretations of the global-scale ordering of magnetic fields and activity centers and by theoretical analyses of rotating convection zones. Direct evidence of these flows in the photosphere has not previously been found despite several long-term efforts. The signatures of such flows have now been detected by analyzing the daily series of low-resolution Dopplergrams obtained at the Wilcox Solar Observatory at Stanford University. The signatures are patterns of alternating east and west flows with amplitudes on the order of 25 m/s and longitudinal extent of about 30 degrees. The patterns move across the disc at approximately the solar rotation rate and have lifetimes of at least several rotations. Boundaries of the fast and slow flows are often associated with large magnetic active regions.

Scherrer, Philip H.↗

Dynamic Mooring Field Experiment and Design of a Wave Energy Converter Platform Test System

Abstract This study evaluated a multi-catenary spread mooring system design of a mobile ocean test berth for wave energy converters (WECs), the Ocean Sentinel (OS) instrumentation buoy, through dynamic simulation, numerical analysis, and comparison with measured field motion data of the OS off the OR coast. First, the accuracy of the numerical employed model based on a fully-coupled method of the OS and its mooring lines was validated by comparing predicted mooring tensions to the field measurements. Then, the anchor movability, fatigue damage, and extreme mooring tension of the OS mooring system were analyzed to assess survivability. Field test results show that the numerical model provided accurate predictions of mooring tensions even under environmental conditions of strong wind, current, and waves. Factors affecting the accuracy are discussed. One mooring anchor was shown to have moved significantly during the ocean field test. Mooring fatigue damage was calculated for different levels of sea states. Design strengths of the mooring lines were calculated and analyzed.

Engineering↗

Measurements of interactions between acoustic fields and nonuniform mean flow

Two problems crucial to the stability of longitudinal acoustic waves in solid rocket motors were examined experimentally. The first is the dissipation of energy associated with an average flow inward at the lateral boundary. Measurements reported here, though subject to considerable experimental error, show that the actual losses are much larger than predicted by the approximate one dimensional analysis. The second problem is the attenuation of waves accompanying reflection by the nonuniform flow in a choked exhaust nozzle. Emphasis on technique, to provide data relatively easily and inexpensively. It appears that good results can be obtained in a routine manner using small supersonic wind tunnel operated as an open cycle. At least for Mach numbers up to 0.04 at the nozzle entrance, difficulties with signal/noise are satisfactorily overcome with a tracking filter.

Magiawala, K.↗

Internally electrodynamic particle model: Its experimental basis and its predictions

The internally electrodynamic (IED) particle model was derived based on overall experimental observations, with the IED process itself being built directly on three experimental facts: (a) electric charges present with all material particles, (b) an accelerated charge generates electromagnetic waves according to Maxwell's equations and Planck energy equation, and (c) source motion produces Doppler effect. A set of well-known basic particle equations and properties become predictable based on first principles solutions for the IED process; several key solutions achieved are outlined, including the de Broglie phase wave, de Broglie relations, Schroedinger equation, mass, Einstein mass-energy relation, Newton's law of gravity, single particle self interference, and electromagnetic radiation and absorption; these equations and properties have long been broadly experimentally validated or demonstrated. A conditioned solution also predicts the Doebner-Goldin equation which emerges to represent a form of long-sought quantum wave equation including gravity. A critical review of the key experiments is given which suggests that the IED process underlies the basic particle equations and properties not just sufficiently but also necessarily.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of mass-velocity on liquid jet atomization in Mach 1 gasflow

Interacting two-phase flow in four differently sized pneumatic two-fluid atomizers was investigated to determine the effect of gas mass-velocity on the Sauter mean diameter of sprays produced by small diameter liquid jets breaking up in high velocity gas flow. Tests were conducted primarily in the acceleration-wave regime for liquid jet atomization, where it was found that the loss of droplets due to vaporization had a marked effect on drop size measurements. A scattered-light scanner, developed at NASA Lewis Research Center, was used to measure the Sauter mean diameter, D sub 32, which was correlated with nitrogen gas mass-velocity to give the following expression: D (sup -1)(sub 32) = 11.7(rho (sub n) V (sub n)) (sup 1.33). The exponent 1.33 for the gas mass-velocity is identical to that predicted by atomization theory for liquid jet breakup in the acceleration-wave regime.

Ingebo, Robert D.↗

SIMULTANEOUS OBSERVATIONS OF A LARGE-SCALE WAVE EVENT IN THE SOLAR ATMOSPHERE: FROM PHOTOSPHERE TO CORONA

For the first time, we report a large-scale wave that was observed simultaneously in the photosphere, chromosphere, transition region, and low corona layers of the solar atmosphere. Using the high temporal and high spatial resolution observations taken by the Solar Magnetic Activity Research Telescope at Hida Observatory and the Atmospheric Imaging Assembly (AIA) on board Solar Dynamic Observatory, we find that the wave evolved synchronously at different heights of the solar atmosphere, and it propagated at a speed of 605 km s{sup -1} and showed a significant deceleration (-424 m s{sup -2}) in the extreme-ultraviolet (EUV) observations. During the initial stage, the wave speed in the EUV observations was 1000 km s{sup -1}, similar to those measured from the AIA 1700 A (967 km s{sup -1}) and 1600 A (893 km s{sup -1}) observations. The wave was reflected by a remote region with open fields, and a slower wave-like feature at a speed of 220 km s{sup -1} was also identified following the primary fast wave. In addition, a type-II radio burst was observed to be associated with the wave. We conclude that this wave should be a fast magnetosonic shock wave, which was first driven by the associated coronal mass ejection and then propagated freely in the corona. As the shock wave propagated, its legs swept the solar surface and thereby resulted in the wave signatures observed in the lower layers of the solar atmosphere. The slower wave-like structure following the primary wave was probably caused by the reconfiguration of the low coronal magnetic fields, as predicted in the field-line stretching model.

79 ASTRONOMY AND ASTROPHYSICS↗

B{sub s}{yields}D{sub s}(3040) form factors and B{sub s} decays into D{sub s}(3040)

Under the assignment of D{sub s}(3040) as a radially excited p-wave cs state with J{sup P}=1{sup +}, we compute the B{sub s}{yields}D{sub s}(3040) form factors within the covariant light-front quark model. Two classification schemes for the p-wave cs meson are adopted. We also use our results to predict the branching ratios (BRs), polarization fractions, and angular asymmetries in semileptonic B{sub s}{yields}D{sub s}(3040)l{nu} (l=e, {mu}, {tau}). The BRs are found at the order of 10{sup -3} for l=e, {mu}, and 10{sup -5} for l={tau}. We find that the polarization fractions and angular asymmetries could be useful to pin down the ambiguities in theoretical prescriptions for D{sub s}(3040). In addition, we investigate the nonleptonic B{sub s}{yields}D{sub s}(3040)M decays under the factorization method, where M denotes a charged pseudoscalar or a vector meson. The BRs of B{sub s}{yields}D{sub s}(3040){rho} and B{sub s}{yields}D{sub s}(3040)D{sub s}{sup *} reach the order of 10{sup -3}, while the other channels are typically smaller by 1-2 orders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The importance of altimeter and scatterometer data for ocean prediction

The prediction of ocean circulation using satellite altimeter data is discussed. Three classes of oceanic response to atmospheric forcing are outlined and examined. Storms, surface waves, eddies, and ocean currents were evaluated in terms of forecasting time requirements. Scatterometer and radiometer applications to ocean prediction are briefly reviewed.

Hurlburt, H. E.↗

The evolution dynamical processes of Ural blocking through the lens of local finite-amplitude wave activity budget analysis

Understanding the formation and evolution mechanisms of Ural blocking (UB) is of great importance for the prediction of UB and relevant extremes in east Asia. Using the 6-hourly ERA-Interim reanalysis data, this study quantifies the conservative and nonconservative processes in the lifecycle of UB through the lens of the hybrid Eulerian-Lagrangian local finite-amplitude wave activity (LWA) diagnostics. It is found that (i) as a wave activity source, eddy heat flux works to not only initiate the UB, but also prevent the wave activity of the blocking from dispersing downstream---the key characteristic of blocking; (ii) both the wave propagation and wave advection mechanisms are indispensable for the evolution of UB, playing a tug-of-war on the downstream development of wave activity; (iii) Throughout the lifespan of UB, diabatic heating provides the most important damping mechanism for the wave activity both upstream and downstream; and (IV) irreversible PV mixing appears to compensate the eddy PV flux during the wave breaking stage of blocking.

Blocking, wave activity, eddy-mean flow interactio↗

Analysis of supersonic stall bending flutter in axial-flow compressor by actuator disk theory

An analytical model was developed for predicting the onset of supersonic stall bending flutter in axial-flow compressors. The analysis is based on two-dimensional, compressible, unsteady actuator disk theory. It is applied to a rotor blade row by considering a cascade of airfoils. The effects of shock waves and flow separation are included in the model. Calculations show that the model predicts the onset, in an unshrouded rotor, of a bending flutter mode that exhibits many of the characteristics of supersonic stall bending flutter. The validity of the analysis for predicting this flutter mode is demonstrated.

Adamczyk, J. J.↗

Influence of binary Coulomb collisions on nonlinear stimulated Raman backscatter in the kinetic regime

The influence of binary Coulomb collisions on trapped particle nonlinearities related to stimulated Raman scatter (SRS) in a single laser speckle is examined using one-dimensional particle-in-cell simulations. Binary Coulomb collisions are incorporated using a numerical particle-pairing algorithm that reproduces a collision integral of the Landau form. The onset of nonlinearly enhanced levels of SRS reflectivity is shown to coincide with electron trapping in the daughter plasma wave and is sensitive to the collisional scattering rate. Relaxation of trapping-induced perturbations to the electron velocity distribution via collisional velocity space diffusion is predicted to have the largest effect on the onset of SRS when the amplitude of the daughter plasma wave is smallest, and trapping-induced perturbations to the electron velocity distribution function are also small. In the absence of higher dimensional detrapping mechanisms (e.g., electron side-loss), it is shown that the onset threshold for enhanced SRS reflectivity is determined predominantly by the parallel diffusion of trapped electrons scattering from bulk thermal electrons, and that for the conditions studied here, the contribution to detrapping from perpendicular diffusion is non-negligible. Additionally, inverse bremsstrahlung heating of the bulk electrons is shown to shift the daughter plasma wave spectrum upward along the Stoke's resonance to larger wave frequency and smaller wave number, changing the linear parametric coupling conditions to SRS backscatter as a function of time. The reduction in SRS reflectivity from binary Coulomb collisions is greatest for laser intensities near the collisionless onset threshold, ulimately leading to an increase in the onset threshold laser intensity for enhanced SRS reflectivity in the kinetic regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving filtering and prediction of spatially extended turbulent systems with model errors through stochastic parameter estimation

The filtering and predictive skill for turbulent signals is often limited by the lack of information about the true dynamics of the system and by our inability to resolve the assumed dynamics with sufficiently high resolution using the current computing power. The standard approach is to use a simple yet rich family of constant parameters to account for model errors through parameterization. This approach can have significant skill by fitting the parameters to some statistical feature of the true signal; however in the context of real-time prediction, such a strategy performs poorly when intermittent transitions to instability occur. Alternatively, we need a set of dynamic parameters. One strategy for estimating parameters on the fly is a stochastic parameter estimation through partial observations of the true signal. In this paper, we extend our newly developed stochastic parameter estimation strategy, the Stochastic Parameterization Extended Kalman Filter (SPEKF), to filtering sparsely observed spatially extended turbulent systems which exhibit abrupt stability transition from time to time despite a stable average behavior. For our primary numerical example, we consider a turbulent system of externally forced barotropic Rossby waves with instability introduced through intermittent negative damping. We find high filtering skill of SPEKF applied to this toy model even in the case of very sparse observations (with only 15 out of the 105 grid points observed) and with unspecified external forcing and damping. Additive and multiplicative bias corrections are used to learn the unknown features of the true dynamics from observations. We also present a comprehensive study of predictive skill in the one-mode context including the robustness toward variation of stochastic parameters, imperfect initial conditions and finite ensemble effect. Furthermore, the proposed stochastic parameter estimation scheme applied to the same spatially extended Rossby wave system demonstrates high predictive skill, comparable with the skill of the perfect model for a duration of many eddy turnover times especially in the unstable regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗