SEARCH · Engineering Papers

Results for “wave modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Unitary Bethe-Salpeter Methods in Two- and Three-Body Systems

The study of resonances, unstable particles formed in particle scattering, is motivated by the questions about the strong interaction and the composition of hadrons. In order to advance this study in the intermediate energy region, a variety of techniques are used. In this thesis, we present work done on two different analyses that use the principle of unitarity and the Bethe-Salpeter equation to study the resonances Lambda(1405), Sigma(1385), and a1(1260). Firstly, we perform a simultaneous analysis of Sand P-waves of the Strangeness = -1 two-body meson-baryon scattering amplitude using all low-energy data. For the first time, differential cross section data are included for chiral unitary coupled-channel models. From this model, S- and P-wave amplitudes are extracted and we observe both well-known I(JP)=0(1/2^-) S-wave states as well as a new I(JP)=1(1/2^+) state absent in quark models and lattice QCD results. Multiple statistical and phenomenological tests suggest that, while the data clearly require an I =1 P-wave resonance, the new state just accounts for the absence of the decuplet Sigma(1385)3/2+ in the model which is subsequently included in the parameterization. Secondly, we formulate the final state interaction of the a1(1260) resonance decay in a manifestly three-body-unitary parameterization and fit it to the a1(1260) lineshape measured by the ALEPH experiment. Dalitz plots calculated from this fit are presented. The work demonstrates the feasibility to numerically solve a previously derived amplitude and its generalization to isobars with spin and coupled channels. The model is a good test case because it can also be applied to other meson decays including exotic states and modified for the finite-volume problem as it arises in lattice QCD due to its manifest unitarity. The understanding of the resonances being analyzed in both the two-body work and the three-body work gives a better understanding of intermediate energy QCD.

Sadasivan, Daniel↗

DOE OSTI2022

HERO WEC V1.0 - WEC-Sim Detailed Simulation Runs and Summary Data

Data sets from simulation runs include 144 wave cases that were run based on the WEC-Sim model (https://mhkdr.openei.org/submissions/483). The 144 wave cases represent waves with the following wave height and wave period ranges: - Significant Wave Height: 0.25 - 4.0m in 0.25m increments - Wave Period: 5 - 13 sec in 1 sec increments Each run was simulated using a Pierson-Moskowitz irregular wave spectrum with a 200 second ramp time and a total simulation time of 2,200 seconds. Summary data set includes a spreadsheet and image files with matrices that are associated with data from simulation runs. All matrices cover the same significant wave height and wave periods from the sim runs, in the same increments. The following matrices are included: - Mechanical Power Input: Absorbed power calculated using linear input velocity at PTO (power take-off) multiplied by winch tension. - Mechanical Power Output: The hydraulic power calculated at the pump output prior to the pressure relief valve dump. - Feed Pressure: Average pressure at RO (reverse osmosis) input prior to pre-filters - RO Power Input: The hydraulic power calculated at the RO system inlet, accounts for flow loss due to pressure relief valve - Water Production: Average clean water flow at RO output

16 TIDAL AND WAVE POWER↗

DOE OSTI2020

Expanding the potential of redox carriers for flow battery applications

Here, using theoretical modeling to guide our approach, substituents were selected to improve the negative and positive potentials associated with a representative metal-based redox carrier, a phenyl spaced nickel bispicolinamide complex, [Ni(bpb)], 1. To broaden the cell potential, electron donating groups were selected and installed on the pyridyl moieties, [Ni(bpb-(NMe 2 ) 2 )], 2, while electron withdrawing groups were incorporated on the phenyl linker, [Ni(bpb-R)] (R = –F, –CF 3 , and –NO 2 ), 3–5. Our model predicts an increase of ~300 mV and ~500 mV for the first and second negative waves of Ni(bpb-NMe 2 ), 2, and up to ~330 mV and ~210 mV increase to the first and second positive waves in 3–5. The modeled complexes were synthesized in good yields using a modification of the literature procedure. Due to limited solubility, the differential pulse voltammetry was measured on complexes 2–5 using a drop cast technique. Comparison of the observed and predicted potentials is discussed in acetonitrile (MeCN) and dimethylformamide (DMF) solvents.

25 ENERGY STORAGE↗

NASA NTRS1977

An empirical model for ocean radar backscatter and its application in inversion routine to eliminate wind speed and direction effects

Several regression models were tested to explain the wind direction dependence of the 1975 JONSWAP (Joint North Sea Wave Project) scatterometer data. The models consider the radar backscatter as a harmonic function of wind direction. The constant term accounts for the major effect of wind speed and the sinusoidal terms for the effects of direction. The fundamental accounts for the difference in upwind and downwind returns, while the second harmonic explains the upwind-crosswind difference. It is shown that a second harmonic model appears to adequately explain the angular variation. A simple inversion technique, which uses two orthogonal scattering measurements, is also described which eliminates the effect of wind speed and direction. Vertical polarization was shown to be more effective in determining both wind speed and direction than horizontal polarization.

Dome, G. J.↗

NASA NTRS1984

Fast-mode magnetohydrodynamic waves in coronal holes and the solar wind

Fast-mode MHD waves in the solar corona can propagate in any direction relative to the background magnetic field. In coronal holes, they refract into regions of low Alfven speed and are relatively difficult to damp. These characteristics lead to the possibility that fast-mode waves transport energy from magnetically closed coronal regions into coronal holes, that they are refracted into the central regions of coronal holes, and that they deposit most of their energy in the region of supersonic flow of high-speed solar wind streams emanating from coronal holes. To investigate whether this possibility might be realized and fast-mode waves might play a significant role in driving high-speed streams, a parameter study is carried out to examine the propagation and damping of fast-mode waves in various coronal hole models. This study indicates a broad range of coronal hole parameters for which fast-mode waves can play such a role and emphasizes the need for an improved knowledge of large-scale coronal magnetic structure, which is required before any firm conclusions can be drawn.

Fla, T.↗

NASA NTRS1990

Electron acceleration by magnetosonic waves in solar flares

Results of a simulation of electron acceleration by magnetosonic waves in a solar coronal loop are presented. The dependence of the energization rate on the strength and shape of the wave spectrum is discussed. Comparisons are made with the predictions of quasilinear theory and of a model describing stochastic acceleration by waves as isotropic diffusion in momentum space.

Zweibel, Ellen G.↗

NASA NTRS2006

Comparison of a Convected Helmholtz and Euler Model for Impedance Eduction in Flow

Impedances educed from a well-tested convected Helmholtz model are compared to that of a recently developed linearized Euler model using two ceramic test liners under the assumed conditions or uniform flow and a plane wave source. The convected Helmholtz model is restricted to uniform mean flow whereas the linearized Euler model can account for the effect or the shear layer. Test data to educe the impedance is acquired from measurements obtained in the NASA Langley Research Center Grazing Incidence Tube for mean flow Mach numbers ranging from 0.0 to 0.5 and source frequencies ranging from 0.5 kHz to 3.0 kHz. The unknown impedance of the liner b educed by judiciously choo~ingth e impedance via an optimization method to match the measured acoustic pressure on the wall opposite the test liner. Results are presented on four spatial grids using three different optimization methods (contour deformation, Davidon-Fletcher Powell, and the Genetic Algorithm). All three optimization methods converge to the same impedance when used with the same model and to nearly identical impedances when used on different models. h anomaly was observed only at 0.5 kHz for high mean flow speeds. The anomaly is likely due to the use of measured data in a flow regime where shear layer effects are important but are neglected in the math models. Consistency between the impedances educed using the two models provides confidence that the linearized Euler model is ready For application to more realistic flows, such as those containing shear layers.

Watson, Willie R.↗

NASA NTRS1988

Effects of eddy viscosity and thermal conduction and Coriolis force in the dynamics of gravity wave driven fluctuations in the OH nightglow

The chemical-dynamical model of Walterscheid et al. (1987), which describes wave-driven fluctuations in OH nightglow, was modified to include the effects of both eddy thermal conduction and viscosity, as well as the Coriolis force (with the shallow atmosphere approximation). Using the new model, calculations were performed for the same nominal case as used by Walterscheid et al. but with only wave periods considered. For this case, the Coriolis force was found to be unimportant at any wave period. For wave periods greater than 2 or 3 hours, the inclusion of thermal conduction alone greatly modified the results (in terms of a complex ratio 'eta' which expresses the relationship between the intensity oscillation about the time-averaged intensity and the temperature oscillation about the time-averaged temperature); this effect was reduced with the further inclusion of the eddy viscosity.

Hickey, M. P.↗

DOE OSTI2022

Localization and Criticality in Antiblockaded Two-Dimensional Rydberg Atom Arrays

Controllable Rydberg atom arrays have provided new insights into fundamental properties of quantum matter both in and out of equilibrium. In this work, we study the effect of experimentally relevant positional disorder on Rydberg atoms trapped in a 2D square lattice under antiblockade (facilitation) conditions. We show that the facilitation conditions lead the connectivity graph of a particular subspace of the full Hilbert space to form a 2D Lieb lattice, which features a singular flat band. Remarkably, we find three distinct regimes as the disorder strength is varied: a critical regime, a delocalized but nonergodic regime, and a regime with a disorder-induced flat band. The critical regime’s existence depends crucially upon the singular flat band in our model, and is absent in any 1D array or ladder system. We propose to use quench dynamics to probe the three different regimes experimentally.

2-dimensional systems↗

DOE OSTI2024

Design and Performance Evaluation of a Resistive Control Using a Hydraulic PTO System for the TALOS Wave Energy Converter

This study is focused on developing a numerical model to evaluate the performance of a hydraulic PTO system for the TALOS Wave Energy Converter. The WEC device is described and the architecture of the hydraulic PTO system is presented with detail. The WEC is modeled using WEC-Sim, and the PTO is modeled using the Simscape Fluids library from Simulink. The hydraulic PTO is based on a constant pressure configuration that is suitable for WEC passive control. The hydraulic system is composed by a set of rectifying valves and two hydraulic accumulators that reduce the stiffness of the system and also serve as energy storage devices. One of the advantages of this hydraulic PTO architecture is the possibility of controlling the electric generator to operate around the optimal efficiency operating point. The main components of the hydraulic PTO are off-the-shelf devices that are commercially available, which will facility a future deployment of the designed system. The design variables used for this study are the accumulator size, the maximum pressure in the accumulators, the hydraulic motor maximum displacement, and the shaft speed in the electric generator. The performance of the system is evaluated individually, using sinusoidal inputs that replicates regular wave conditions. In addition to this, the numerical model of the PTO is coupled to a WEC-Sim simulation of the TALOS Wave Energy Converter with six PTOs to generate a wave-to-wire model. The main objective of this work is to present a comprehensive design methodology that could serve as a guideline for future research efforts focused on implementing control algorithms on multi degree of freedom WECs.

hydraulic systems↗

NASA NTRS1983

Radio scintillations observed during atmospheric occultations of Voyager: Internal gravity waves at Titan and magnetic field orientations at Jupiter and Saturn

The refractive index of planetary atmospheres at microwave frequencies is discussed. Physical models proposed for the refractive irregularities in the ionosphere and neutral atmosphere serve to characterize the atmospheric scattering structures, and are used subsequently to compute theoretical scintillation spectra for comparison with the Voyager occultation measurements. A technique for systematically analyzing and interpreting the signal fluctuations observed during planetary occultations is presented and applied to process the dual-wavelength data from the Voyager radio occultations by Jupiter, Saturn, and Titan. Results concerning the plasma irregularities in the upper ionospheres of Jupiter and Saturn are reported. The measured orientation of the irregularities is used to infer the magnetic field direction at several locations in the ionospheres of these two planets; the occultation measurements conflict with the predictions of Jovian magnetic field models, but generally confirm current models of Saturn's field. Wave parameters, including the vertical fluxes of energy and momentum, are estimated, and the source of the internal gravity waves discovered in Titan's upper atmosphere is considered.

Hinson, D. P.↗

DOE OSTI2022

Nonlinear Model Predictive Control Based on Real-Time Iteration Scheme for Wave Energy Converters Using WEC-Sim

One of several challenges that wave energy technologies face is their inability to generate electricity cost-competitively with other grid-scale energy generation sources. Several studies have identified two approaches to lower the levelised cost of electricity: reduce the cost over the device's lifetime or increase its overall electrical energy production. Several advanced control strategies have been developed to address the latter. However, only a few take into account the overall efficiency of the power take-off (PTO) system, and none of them solve the optimisation problem that arises at each sampling time on real-time. In this paper, a detailed Nonlinear model predictive control (NMPC) approach based on the real-time iteration (RTI) scheme is presented, and the controller performance is evaluated using a time-domain hydrodynamics model (WEC-Sim). The proposed control law incorporates the PTO system's efficiency in a control law to maximise the energy extracted. The study also revealed that RTI-NMPC clearly outperforms a simple resistive controller.

model predictive control↗

DOE OSTI2022

Nonlinear Model Predictive Control Based on Real-Time Iteration Scheme for Wave Energy Converters Using WEC-Sim: Preprint

model predictive control↗

DOE OSTI2022

Optimization of artificial viscosity in production codes based on Gaussian Regression surrogate models

To accurately model flows with shock waves using staggered-grid Lagrangian hydrodynamics, artificial viscosity has to be introduced to convert kinetic energy into internal energy, thereby increasing the entropy across shocks. Determining the appropriate strength of the artificial viscosity is an art and strongly depends on the particular problem and experience of the researcher. The objective of this study is to pose the problem of finding the appropriate strength of artificial viscosity as an optimization problem and solve this problem using machine learning (ML) tools, specifically using surrogate models based on Gaussian Process regression and Bayesian analysis. We describe the optimization method and discuss various practical details of its implementation. The shock-containing problems for which we apply this method all have been implemented in the LANL code FLAG. First, we apply ML to find optimal values to isolated shock problems of different strengths. Second, we apply ML to optimize viscosity for a 1D propagating detonation problem based on Zel’dovich-von Neumann-Doring (ZND) detonation theory using a reactive burn model. We compare results for default (currently used values in FLAG) and optimized values of artificial viscosity for these problems demonstrating the potential for significant improvement in the accuracy of computations.

42 ENGINEERING↗

NASA NTRS2016

Benchmarking of Computational Models for NDE and SHM of Composites

Ultrasonic wave phenomena constitute the leading physical mechanism for nondestructive evaluation (NDE) and structural health monitoring (SHM) of solid composite materials such as carbon-fiber-reinforced polymer (CFRP) laminates. Computational models of ultrasonic guided-wave excitation, propagation, scattering, and detection in quasi-isotropic laminates can be extremely valuable in designing practically realizable NDE and SHM hardware and software with desired accuracy, reliability, efficiency, and coverage. This paper presents comparisons of guided-wave simulations for CFRP composites implemented using three different simulation codes: two commercial finite-element analysis packages, COMSOL and ABAQUS, and a custom code implementing the Elastodynamic Finite Integration Technique (EFIT). Comparisons are also made to experimental laser Doppler vibrometry data and theoretical dispersion curves.

composite materials↗

DOE OSTI2025

High frequency gravitational wave sensing with superconducting microwave cavities

A promising way to probe physics beyond the Standard Model is to search for gravitational wave (GW) signals at high frequencies where known astrophysical sources can not obscure the signal. Similar to the search for dark matter, microwave cavity resonators can be used to detect faint effects from GWs. We will report on the progress of our project to operate such a detector and highlight improvements we are planning in the future. This includes quantum enhancement techniques like vacuum squeezing which will allow future detectors to operate beyond the standard quantum limit.

Marconato, Giovanni [Hamburg U.]↗

NASA NTRS2012

A Modeling Study of the On-Going Drought and Heat Wave over the United States

Ensembles of AGCM experiments have been conducted to examine the causes of the on-going drought and heat wave affecting much of the United States. The results show that the drought and hot temperatures that have been especially severe over Texas and parts of Mexico since late 2010 are the result of a combination of SST forcing from both the tropical Pacific and the tropical Atlantic, with the latter playing a particularly important role during later half of the summer of 2011, and the warm SSTs off the East Coast contributing to the warm conditions along the East Coast. An extension of the model simulations into the summer of 2012 suggests that the warm conditions are again primarily driven by SST forcing - despite the return of the tropical Pacific to neutral conditions. The results of additional experiments currently being conducted to separate the influences of the 2012 SST anomalies in the various ocean basins will be discussed.

Schubert, S.↗

DOE OSTI2024

Magnon interactions in the quantum paramagnetic phase of CoNb 2 O 6

In this work, we study effects of magnon interactions in the excitation spectrum of CoNb 2 O 6 in the quantum paramagnetic phase in transverse field, where the 1/S spin-wave theory exhibits unphysical divergences at the critical field. We propose a self-consistent Hartree-Fock approach that eliminates such unphysical singularities while preserving the integrity of the singular threshold phenomena of magnon decay and spectrum renormalization that are present in both theory and experiment. With the microscopic parameters adopted from previous studies, this method yields a close quantitative agreement with the available experimental data for CoNb 2 O 6 in the relevant regime. Furthermore, insights into the general structure of the spin-anisotropic model of CoNb 2 O 6 and related zigzag chain materials are also provided and a discussion of the effects of additional longitudinal field on the spectrum is given.

1-dimensional spin chains↗