Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transit method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Open Circuit Potential Method for Thermodynamic Hydricity Measurements of Metal Hydrides

Metal hydrides are prevalent in many catalytic reactions, and thermodynamic hydricity has emerged as a useful parameter for understanding and predicting key hydride transfer steps with these intermediates. An open circuit potentiometry method for determining the hydricity of metal hydrides with a single thermodynamic parameter is reported. The open circuit potential (OCP) of a solution containing a metal hydride and its conjugate hydride acceptor, along with a conjugate acid/base pair, is coupled with known values for the acid pK a and H + /H – reduction potential to determine the hydricity. Here, the reliability of the method was established by using potentiometry to obtain the hydricity of three hydride complexes with varying supporting ligands and transition metal elements in acetonitrile solvent, all within error of previously reported values. Advantages and drawbacks of this method are discussed, and a recommended workflow for practitioners is introduced.

Anions↗
NASA NTRS1991

Continuous wave laser absorption techniques for gasdynamic measurements in supersonic flows

Line-of-sight measurements of velocity, temperature, pressure, density, and mass flux were performed in a transient shock tube flow using three laser absorption schemes. All methods employed an intracavity-doubled ring dye laser tuned to an OH transition at 306 nm. In the first scheme, the gas was labeled by 193.3-nm excimer photolysis of H2O, and the passage of the generated OH was detected downstream. In the second method, the laser was tuned at a rate of 3 kHz over the R1(7) and R1(11) line pair, and absorption was simultaneously monitored at 90 and 60 deg with respect to the flow. Velocity was determined from the Doppler shift of the profiles and the temperature from the intensity ratio of the lines. Pressure was determined from both the magnitude of absorption and the collisional broadening. In the third method, the laser wavelength was fixed at a single frequency, and a continuous measurement of velocity and pressure was obtained using the signals from the two beam paths. All methods gave results which compare favorably to calculated values.

Davidson, David F.↗
DOE OSTI2016

Strain development during the phase transition of La(Fe,Mn,Si){sub 13}H{sub z}

We use powder X-ray diffraction to evaluate the temperature dependence of the crystalline properties during the magnetic phase transition of La(Fe,Mn,Si){sub 13}H{sub z} as a function of the Fe/Mn/Si ratio. Both the paramagnetic and ferromagnetic phases were observed as peak overlaps in the patterns around the Curie temperature (T{sub C}) occurring continuously in a temperature range of about 5 K around T{sub C.} Using the Williamson-Hall method, we evaluate the strain developing in the crystallites during the transition and find that it is associated with the growth of the paramagnetic phase as the transition occurs. Based on our measurements and microstructure analyses, we propose that cracking during the phase transition is due to or aggravated by the small content of a La-rich phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Influence of the electromagnetic field on the transition of a two-level system in a Gaussian confinement potential with LO phonon and of thickness effects

In this paper, the asymmetric Gaussian confinement potential and the parabolic confinement potential (PCP) are selected to describe the along growth direction and perpendicular to growth direction confinement potential (PC) of electron in a disk quantum dot, respectively. The phonons mean number and the energies of the ground and first excited states of the electron in a quantum dot with the polarization and the thickness effect are investigated by using Lee–Low–Pines unitary transformation and the Pekar-type variational method, and on the basis of the Fermi Golden Rule, the transition of the electron caused by the electromagnetic field is discussed. Our numerical results have displayed that the electric field and the magnetic field are an indispensable condition for the induced polaron transition. The weak electric field has a strong regulatory function on the transition. The influence of the well width L and the well depth V{sub 0} of the AGFCP on the mean number of phonons, energies and transition are important and interesting; it is also found in this work that the AGFCP is better than PCP in explaining the quantum size effect of QDs and modulating electron transition properties, respectively. This quantum system can be employed as a two-level quantum qubit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRSDate not supplied

Enhancements to Linear Stability-Based, CFD-integrated Transition Prediction for High-Speed Flows

Combining linear stability calculations with computational fluid dynamics (CFD) simulations has great potential for the automated modeling of high-speed flows, especially when adequate information about the configuration and the disturbance environment is available. However, a significant impediment to the applicability of this technique is the lack of an efficient method to calculate the crucial amplification ratio corresponding to the onset of transition in hypersonic flows. This ratio, also known as the "transition N-factor," is dependent upon the freestream disturbance environment as well as the surface properties of the test article. In response to the need for an engineering solution to predict the transition N-factor within conventional hypersonic wind tunnels, this paper presents a data-driven correlation that expands the existing correlations from straight circular cones with a narrow range of half angles to a broader array of axisymmetric configurations. Furthermore, when tested against a chosen dataset that was not used in its calibration, the suggested correlation shows good predictive accuracy with an RMS error of only 6.9%. Although similar accuracy may also be achieved via existing correlations based on similar datasets, predictions based on the proposed correlation have the advantage of not requiring an extensive amount of configuration-specific data. Practical applications often have access to the input parameters needed for this correlation, such as the freestream disturbance intensity, Mach number, and body-based slenderness Reynolds number. Additionally, this correlation outperforms the traditional assumption of a constant N-factor, particularly for configurations with blunted nose geometries. The development of this correlation is grounded in an extensive dataset encompassing conical models with body half-angles varying between 5 degrees and 16 degrees, Mach numbers ranging from 5 to 14, and nosetip-based Reynolds numbers approaching the transition reversal limit for blunt-nosed cones.

CFD↗
NASA NTRSDate not supplied

Enhancements to Linear Stability-Based, CFD-integrated Transition Prediction for High-Speed Flows

Combining linear stability calculations with computational fluid dynamics (CFD) simulations has great potential for the automated modeling of high-speed flows, especially when adequate information about the configuration and the disturbance environment is available. However, a significant impediment to the applicability of this technique is the lack of an efficient method to calculate the crucial amplification ratio corresponding to the onset of transition in hypersonic flows. This ratio, also known as the "transition N-factor," is dependent upon the freestream disturbance environment as well as the surface properties of the test article. In response to the need for an engineering solution to predict the transition N-factor within conventional hypersonic wind tunnels, this paper presents a data-driven correlation that expands the existing correlations from straight circular cones with a narrow range of half angles to a broader array of axisymmetric configurations. Furthermore, when tested against a chosen dataset that was not used in its calibration, the suggested correlation shows good predictive accuracy with an RMS error of only 6.9%. Although similar accuracy may also be achieved via existing correlations based on similar datasets, predictions based on the proposed correlation have the advantage of not requiring an extensive amount of configuration-specific data. Practical applications often have access to the input parameters needed for this correlation, such as the freestream disturbance intensity, Mach number, and body-based slenderness Reynolds number. Additionally, this correlation outperforms the traditional assumption of a constant N-factor, particularly for configurations with blunted nose geometries. The development of this correlation is grounded in an extensive dataset encompassing conical models with body half-angles varying between 5 degrees and 16 degrees, Mach numbers ranging from 5 to 14, and nosetip-based Reynolds numbers approaching the transition reversal limit for blunt-nosed cones.

CFD↗
NASA NTRS1995

Electron excitation cross sections for the 2s(2)2p(3)4S(O) -- 2s(2)2p(3)2D(O) (forbidden) and 4S(O) -- 2s2p(4) 4P (resonance) transitions in O II

Experimental and theoretical excitation cross sections are reported for the first forbidden transition 4S(O) -- 2S(2)2p(3) 2D(O) (lambda-lambda 3726, 3729) and the first allowed (resonance) transition 4S(O) -- 2s2p(4) 4P(lambda-833) in O II. Use is made of electron energy loss and merged-beams methods. The electron energy range covered is 3.33 (threshold) to 15 eV for the S -- D transition, and 14.9 (threshold) to 40 eV for the S -- P transition. Care was taken to assess and minimize the metastable fraction of the O II beam. An electron mirror was designed and tested to reflect inelastically backscattered electrons into the forward direction to account for the full range of polar scattering angles. Comparisons are made between present experiments and 11-state R-matrix calculations. Calculations are also presented for the 4S(O) -- 2s(2)2p(3)2P(O) (lambda-2470) transition.

Zuo, M.↗
DOE OSTI2015

Transition metal decorated graphene-like zinc oxide monolayer: A first-principles investigation

Transition metal (TM) atoms have been extensively employed to decorate the two-dimensional materials, endowing them with promising physical properties. Here, we have studied the adsorption of TM atoms (V, Cr, Mn, Fe, and Co) on graphene-like zinc oxide monolayer (g-ZnO) and the substitution of Zn by TM using first-principles calculations to search for the most likely configurations when TM atoms are deposited on g-ZnO. We found that when a V atom is initially placed on the top of Zn atom, V will squeeze out Zn from the two-dimensional plane then substitute it, which is a no barrier substitution process. For heavier elements (Cr to Co), although the substitution configurations are more stable than the adsorption ones, there is an energy barrier for the adsorption-substitution transition with the height of tens to hundreds meV. Therefore, Cr to Co prefers to be adsorbed on the hollow site or the top of oxygen, which is further verified by the molecular dynamics simulations. The decoration of TM is revealed to be a promising approach in terms of tuning the work function of g-ZnO in a large energy range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Machine-Learning Enabled New Insights into the Coil-to-Globule Transition of Thermosensitive Polymers Using a Coarse-Grained Model

In this paper, we present a computational framework that integrates coarse-grained (CG) molecular dynamics (MD) simulations and a data-driven machine-learning (ML) method to gain insights into the conformations of polymers in solutions. We employ this framework to study conformational transition of a model thermosensitive polymer, poly(N-isopropylacrylamide) (PNIPAM). Here, we have developed the first of its kind, a temperature-independent CG model of PNIPAM that can accurately predict its experimental lower critical solution temperature (LCST) while retaining the tacticity in the presence of an explicit water model. The CG model was extensively validated by performing CG MD simulations with different initial conformations, varying the radius of gyration of chain, the chain length, and the angle between the adjacent monomers of the initial configuration of PNIPAM (total simulation time = 90 μs). Moreover, for the first time, we utilize the nonmetric multidimensional scaling (NMDS) method, a data-driven ML approach, to gain further insights into the mechanisms and pathways of this coil-to-globule transition by analyzing CG MD simulation trajectories. In conclusion, NMDS analysis provides entirely new insights and shows multiple metastable states of PNIPAM during its coil-to-globule transition above the LCST.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effects of Transition Layer on Bending Resistance in Copper-Clad Aluminum Composite Casting

The performance of the transition layer in a Cu/Al composite casting directly affects the quality of subsequent plastic deformation processing; however, there are no universal or standardized measurement indices for the performance of the transition layer. In this study, Cu/Al composite castings were prepared using the pouring aluminum method, and the resulting solidification microstructures on the bending resistance were investigated. The results of this study lay a theoretical foundation for the development of the plastic processing technologies of these composite castings. A thinner transition layer in the Cu/Al composite casting led to improved bending resistance. In addition, for a fixed total thickness of the transition layer, the bending resistance was mainly controlled by the γ/β interface and β + eutectic (α + β) microstructure, and the thickness of the γ phase had a negligible effect on the bending resistance. The γ/β interface cracked first when the transition layer bore the tensile and shear stress during the bending process, which resulted in the transition layer easily separating from the copper. The bending resistance of the transition layer can be feasibly judged by measuring the bending angle of the specimen tip, which can be easily performed when the specimen bends toward the aluminum direction, suggesting that our proposed method has considerable practical significance.

36 MATERIALS SCIENCE↗
DOE OSTI2018

An Extended Group Additivity Method for Polycyclic Thermochemistry Estimation

Automatic kinetic mechanism generation, virtual high-throughput screening, and automatic transition state search are currently trending applications requiring exploration of a large molecule space. Large-scale search requires fast and accurate estimation of molecules’ properties of interest, such as thermochemistry. Existing approaches are not satisfactory for large polycyclic molecules: considering the number of molecules being screened, quantum chemistry (even cheap density functional theory methods) can be computationally expensive, and group additivity, though fast, is not sufficiently accurate. Here, this paper provides a fast and moderately accurate alternative by proposing a polycyclic thermochemistry estimation method that extends the group additivity method with two additional algorithms: similarity match and bicyclic decomposition. It significantly reduces H f (298 K) estimation error from over 60 kcal/mol (group additivity method) to around 5 kcal/mol, C p (298 K) error from 9 to 1 cal/mol/K,and S(298 K) error from 70 to 7 cal/mol/K. This method also works well for heteroatomic polycyclics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Quantum phase transition by employing trace distance along with the density matrix renormalization group

We use an alternative method to investigate the quantum criticality at zero and finite temperature using trace distance along with the density matrix renormalization group. It is shown that the average correlation measured by the trace distance between the system block and environment block in a DMRG sweep is able to detect the critical points of quantum phase transitions at finite temperature. As illustrative examples, we study spin-1 XXZ chains with uniaxial single-ion-type anisotropy and the Heisenberg spin chain with staggered coupling and external magnetic field. It is found that the trace distance shows discontinuity at the critical points of quantum phase transition and can be used as an indicator of QPTs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1974

Aeroelastic stability of coupled flap-lag motion of hingeless helicopter blades at arbitrary advance ratios

Equations for large amplitude coupled flap-lag motion of a hingeless elastic helicopter blade in forward flight are derived. Only a torsionally rigid blade excited by quasi-steady aerodynamic loads is considered. The effects of reversed flow together with some new terms due to radial flow are included. Using Galerkin's method the spatial dependence is eliminated and the equations are linearized about a suitable equilibrium position. The resulting system of homogeneous periodic equations is solved using multivariable Floquet-Liapunov theory, and the transition matrix at the end of the period is evaluated by two separate methods. Computational efficiency of the two numerical methods is compared. Results illustrating the effects of forward flight and various important blade parameters on the stability boundaries are presented.

Friedmann, P.↗
DOE OSTI2018

Free energy of grain boundary phases: Atomistic calculations for Σ 5 ( 310 ) [ 001 ] grain boundary in Cu

Atomistic simulations are employed to demonstrate the existence of a well-defined thermodynamic phase transformation between grain boundary (GB) phases with different atomic structures. The free energy of different interface structures for an embedded-atom-method model of the Σ5 (310) [001] symmetric tilt boundary in elemental Cu is computed using the nonequilibrium Frenkel-Ladd thermodynamic integration method through molecular dynamics simulations. It is shown that the free-energy curves predict a temperature-induced first-order interfacial phase transition in the GB structure in agreement with computational studies of the same model system. Moreover, the role of vibrational entropy in the stabilization of the high-temperature GB phase is clarified. The calculated results are able to determine the GB phase stability at homologous temperatures less than 0.5, a temperature range particularly important given the limitation of the methods available hitherto in modeling GB phase transitions at low temperatures. Lastly, the calculation of GB free energies complements currently available 0 K GB structure search methods, making feasible the characterization of GB phase diagrams.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Recommended electron-impact excitation and ionization cross sections for Be I

Analytic fits to the recommended electron-impact excitation and ionization cross sections for Be I are presented. The lowest 19 terms of configurations 2s nl (n ≤ 4) and 2p{sup 2} terms below the first ionization limit are considered. The fits are based on the accurate calculations with the convergent close coupling (CCC) method as well as the B-spline R-matrix (BSR) approach. The fitted cross sections provide rate coefficients that are believed to approximate the original data within 10% with very few exceptions. The oscillator strengths for the dipole-allowed transitions between all the considered states are calculated with the relativistic multi-configuration Dirac–Hartree–Fock (MCDHF) approach and compared with the CCC and BSR results. This comparison shows a very good agreement except for a handful of cases with likely strong cancellations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Communication: Uncovering correlated vibrational cooling and electron transfer dynamics with multidimensional spectroscopy

Analogues of 2D photon echo methods in which two population times are sampled have recently been used to expose heterogeneity in chemical kinetics. In this work, the two population times sampled for a transition metal complex are transformed into a 2D rate spectrum using the maximum entropy method. The 2D rate spectrum suggests heterogeneity in the vibrational cooling (VC) rate within the ensemble. In addition, a cross peak associated with VC and back electron transfer (BET) dynamics reveals correlation between the two processes. Here, we hypothesize that an increase in the strength of solute-solvent interactions, which accelerates VC, drives the system toward the activationless regime of BET.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

𝐴𝑏 initio density-matrix approach to exciton coherence: Phonon scattering, Coulomb interactions, and radiative recombination

Relaxation processes following light excitation in semiconductors are key in materials-based quantum technology applications. These processes are broadly studied in atomically thin transition-metal dichalcogenides, quasi-two-dimensional excitonic semiconductors in which atomistic design allows for tunable excited-state properties, such as relaxation lifetimes and photoinduced coherence. In this work, we present a density-matrix-based approach to compute exciton relaxation within a many-body ab initio perspective. We expand our previously developed Lindblad density-matrix formalism to capture multichannel electron-hole pair relaxation processes, including phonon and Coulomb scattering as well as radiative recombination, and we study their effect on the time-resolved excited-state propagation. Using monolayer MoSe 2 as a prototypical example, we examine many-body effects on the time-dependent dynamics of photoactive excitations, exploring how the electron-hole pair interactions are reflected in variations of the excitation energy, spectral signature, and state coherence. In conclusion, our method supplies a detailed understanding of exciton relaxation mechanisms in realistic materials, offering a previously unexplored pathway to study excited-state dynamics in semiconductors from first principles.

Band structure methods↗
DOE OSTI2019

Finite-element simulation of the liquid-liquid transition to metallic hydrogen

Hydrogen at high temperature and pressure undergoes a phase transition from a liquid molecular phase to a conductive atomic state, or liquid metallic hydrogen, sometimes referred to as the plasma phase transition (PPT). The PPT phase line was observed in a recent experiment studying laser-pulse heated hydrogen in a diamond anvil cell in the pressure range ~100–170 GPa for temperatures up to ~2000 K. Here, the experimental signatures of the transition are (i) a negative pressure-temperature slope, (ii) a plateau in the heating curve, assumed to be related to the latent heat of transformation, and (iii) an abrupt increase in the reflectance of the sample. We present a finite-element simulation that accurately takes into account the position and time dependence of the heat deposited by the laser pulse. We calculate the heating curves and the sample reflectance and transmittance. This simulation confirms that the observed plateaus are related to the phase transition; however, we find that large values of latent heat are needed and may indicate that dynamics at the transition are more complex than considered in current models. Finally, experiments are proposed that can distinguish between a change in optical properties due to a transition to a metallic state or due to closure of the band gap in molecular hydrogen.

08 HYDROGEN↗