SEARCH · Engineering Papers

Results for “three phase modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Heating of coronal loops by phase-mixid shear Alfven waves

The dissipation of shear Alfven waves in a coronal loop driven externally by an incident wave in the subcoronal region is investigated. The phase mixing of these incident shear Alfven waves serves as the dissipation mechanism in the corona. The wave solution found by Heyvaerts and Priest (1983) for coronal holes is used to compute the total energy deposited in a loop. The energy deposited is shown to depend upon the magnetic diffusivity nu(m) and viscosity nu(v), contrary to the conclusion of authors who assumed that coronal loops are perfect resonators. The energy deposited in a three-layer model is computed for incident waves with periods of five minutes or five seconds. For a five-minute period, almost no energy is deposited, especially for small loops. For a five-second period, a substantial amount of energy is deposited in the loop, but not enough to account for the heating of small loops.

Abdelatif, Toufik E.↗

NASA NTRS1988

Active region coronal loops - Structural and variability

X-ray images of a pair of active region loops are studied which show significant, short time-scale variability in the line fluxes of O VIII, Ne IX, and Mg XI and in the 3.5-11.5 keV soft X-ray bands. Vector magnetograms and high-resolution UV images were used to model the three-dimensional characteristics of the loops. X-ray light curves were generated spanning four consecutive orbits for both loops individually, and light curves of the loop tops and brightest points were also generated. The largest variations involve flux changes of up to several hundred percent on time scales of 10 minutes. No significant H-alpha flare activity is reported, and loop temperatures remain in the four to six million K range. The decay phases of the light curves indicate radiative cooling, inhibition of conduction, and some type of 'continued heating' due to ongoing, underlying activity at the microflare level.

Haisch, Bernhard M.↗

NASA NTRS1989

Numerical analysis of natural convection in liquid droplets by phase change

A numerical analysis is performed on thermocapillary buoyancy convection induced by phase change in a liquid droplet. A finite-difference code is developed using an alternating-direction implicit (ADI) scheme. The intercoupling relation between thermocapillary force, buoyancy force, fluid property, heat transfer, and phase change, along with their effects on the induced flow patterns, are disclosed. The flow is classified into three types: thermocapillary, buoyancy, and combined convection. Among the three mechanisms, the combined convection simulates the experimental observations quite well, and the basic mechanism of the observed convection inside evaporating sessile drops is thus identified. It is disclosed that evaporation initiates unstable convection, while condensation always brings about a stable density distribution which eventually damps out all fluid disturbances. Another numerical model is presented to study the effect of boundary recession due to evaporation, and the 'peeling-off' effect (the removal of the surface layer of fluid by evaporation) is shown to be relevant.

Duh, J. C.↗

NASA NTRS1993

An advanced test technique to quantify thermomechanical fatigue damage accumulation in composite materials

A mechanical test technique was developed to assist in quantifying the accumulation of damage in composite materials during thermomechanical fatigue (TMF) cycling. This was accomplished by incorporating definitive elastic mechanical property measurements into an ongoing load-controlled TMF test without disturbing the test specimen or significantly altering the test conditions. The technique allows two fundamental composite properties consisting of the isothermal elastic static moduli and the macroscopic coefficient of thermal expansion (CTE) to be measured and collected as functions of the TMF cycles. The specific implementation was incorporated into the commonly employed idealized in-phase and out-of-phase TMF cycles. However, the techniques discussed could be easily implemented into any form of load-controlled TMF mission cycle. By quantifying the degradations of these properties, tremendous insights are gained concerning the progression of macroscopic composite damage and often times the progression of damage within a given constituent. This information should also be useful for the characterization and essential for the verification of analytical damage modeling methodologies. Several examples utilizing this test technique are given for three different fiber lay-ups of titanium metal matrix composites.

Castelli, Michael G.↗

NASA NTRS1999

Evidence for Methane Segregation at the Surface of Pluto

In May 1995, a set of spectrophotometric curves of the system Pluto-Charon was recorded with the UKIRT telescope equipped with the spectrometer CGS4. As for the previous observations, the spectra cover a part of the near infrared range, between 1.4 and 2.55 micrometers, but with a higher resolution of approximately 700. In both the 1992 and 1995 data, the existence of solid methane is confirmed by numerous absorption bands, and the carbon monoxide and the nitrogen ices are identified by their respective signatures at 2.35 and 2.15 um. The solid nitrogen seems to be the principal icy component and forms a matrix in which the CH4 and CO molecules are diluted. However a spectroscopic analysis of the 1995 observations indicates that pure methane may coexist with its diluted phase in N2. In order to derive the horizontal and vertical distribution of these different species and to obtain some quantitative information about their characteristics, we have modeled the spectrum of May 15 that corresponds to the maximum of Pluto's visible light curve. This was achieved by means of a radiative transfer algorithm dealing with compact and stratified media. Among the various representations we have tested to describe the surface of Pluto, only a geographical mixture of three distinct units explains all the significant structures of the analyzed spectrum. The first unit is a thin granular layer of pure CH4 covering a compact polycrystalline substratum of N2-CH4-CO, which are in a molecular mixture (concentrations of and CO of the order of 0.45%, 0.1-0.2% respectively). It covers about 70% of the observed area and corresponds to volatile deposits that are sublimating under solar illumination. The second unit is either (a) a single thick layer of pure granular methane or (b) a unit similar to the first unit but with the two components inverted (i.e. with CH4 forming a substratum and the N2-CH4-CO mixture a superficial layer of fine grains). Covering 20% of the surface, it represents some old surfaces that have been sublimated for a long time, and eventually recovered later by very small amounts of fresh deposits of the molecular mixture N2-CH4-CO. Finally, the third unit may result from the condensation of very fine grains of nearly pure N2. It covers the remainder of the surface (about 10%). All these results allow a better understanding of the processes of deposition, metamorphism, sublimation and transport affecting the different ices detected on Pluto during its climatic cycles.

Doute, S.↗

NASA NTRS2017

A Comparison of Three Random Number Generators for Aircraft Dynamic Modeling Applications

Three random number generators, which produce Gaussian white noise sequences, were compared to assess their suitability in aircraft dynamic modeling applications. The first generator considered was the MATLAB (registered) implementation of the Mersenne-Twister algorithm. The second generator was a website called Random.org, which processes atmospheric noise measured using radios to create the random numbers. The third generator was based on synthesis of the Fourier series, where the random number sequences are constructed from prescribed amplitude and phase spectra. A total of 200 sequences, each having 601 random numbers, for each generator were collected and analyzed in terms of the mean, variance, normality, autocorrelation, and power spectral density. These sequences were then applied to two problems in aircraft dynamic modeling, namely estimating stability and control derivatives from simulated onboard sensor data, and simulating flight in atmospheric turbulence. In general, each random number generator had good performance and is well-suited for aircraft dynamic modeling applications. Specific strengths and weaknesses of each generator are discussed. For Monte Carlo simulation, the Fourier synthesis method is recommended because it most accurately and consistently approximated Gaussian white noise and can be implemented with reasonable computational effort.

Grauer, Jared A.↗

DOE OSTI2025

Prospects of Nanoscience with Nanocrystals: 2025 Edition

Abstract Nanocrystals (NCs) of various compositions have made important contributions to science and technology, with their impact recognized by the 2023 Nobel Prize in Chemistry for the discovery and synthesis of semiconductor quantum dots (QDs). Over four decades of research into NCs has led to numerous advancements in diverse fields, such as optoelectronics, catalysis, energy, medicine, and recently, quantum information and computing. The last 10 years since the predecessor perspective “Prospect of Nanoscience with Nanocrystals” was published in ACS Nano have seen NC research continuously evolve, yielding critical advances in fundamental understanding and practical applications. Mechanistic insights into NC formation have translated into precision control over NC size, shape, and composition. Emerging synthesis techniques have broadened the landscape of compounds obtainable in colloidal NC form. Sophistication in surface chemistry, jointly bolstered by theoretical models and experimental findings, has facilitated refined control over NC properties and represents a trusted gateway to enhanced NC stability and processability. The assembly of NCs into superlattices, along with two-dimensional (2D) photolithography and three-dimensional (3D) printing, has expanded their utility in creating materials with tailored properties. Applications of NCs are also flourishing, consolidating progress in fields targeted early on, such as optoelectronics and catalysis, and extending into areas ranging from quantum technology to phase-change memories. In this perspective, we review the extensive progress in research on NCs over the past decade and highlight key areas where future research may bring further breakthroughs.

Chemistry↗

DOE OSTI2023

How does your gyroid grow? A mesoatomic perspective on supramolecular, soft matter network crystals

We propose and describe a framework to understand the structure of supramolecular network crystals formed in soft matter in terms of mesoatomic building blocks, collective groupings of amphiphilic molecules that play a role analogous to atomic or molecular subunits of hard matter crystals. While the concept of mesoatoms is intuitive and widely invoked in crystalline arrangements of spherelike or cylinderlike (micellelike) domains, analogous notions of natural and physically meaningful building blocks of triply periodic network (TPN) crystals, like the double-gyroid or double-diamond structures are obscured by the complex, bicontinuous domain shapes and intercatenated topologies of the double networks. Focusing on the specific example of diblock copolymer melts, we propose generic rules for decomposing TPN crystals into a unique set of mesoatomic building blocks. Based on physically motivated principles, the combination of symmetries and topologies of these structures point to mesoatomic elements associated with the nodal connections, leading to mesoatomic volumes that are nonconvex and bound by smoothly curved faces, unlike the more familiar Voronoi polyhedral shapes associated with spherelike and cylinderlike mesoatoms. We analyze the shapes of these mesoatoms, their internal structure, and importantly, their local packing with neighbor mesoatomic units. Importantly, we hypothesize that mesoatoms are kinetically favored intermediate structures whose local shapes and packing template network crystal assembly on long time scales. We propose and study a minimal energetic model of mesoatom assembly for three different cubic double-network crystals, based on local shape packing, which predicts a detailed picture for kinetics of intercatenation and surface growth. Based on these analyses, we discuss several possible extensions and elaborations of the mesoatomic description of supramolecular soft matter network crystals, most notably the implications of mesoatomic malleability, a feature that distinguishes soft matter from hard matter crystals. We describe experimental observations of malleable mesoatomic units in the precursor sponge phase as well as in ordered cubic networks and suggest possibilities for observing mesoatoms in primordial, precrystalline states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

TOUGH3/EOS7MG (EOS7MG) v1.1

EOS7MG is a new TOUGH3 module for modeling water, brine, and multiple gas mixtures in the subsurface multiphase flow system. The module allows mixture of as more as three gas components selecting from a list of predefined gases (CH4, C2H6, C3H8, H2S, CO2, N2, NO2, H2, and AIR). EOS7MG was developed based on EOS7C and inherited the general modeling capabilities of the TOUGH3 platform. It uses cubic equation of states for gas density, viscosity, and enthalpy calculation. The module provides the selection options for Peng-Robinson, Redlich-Kwong, or Soave-Redlich-Kwong equations of state. The subsurface flow and transport of gas and aqueous phase mixtures over a wide range of pressures and temperatures is modeled with a multiphase Darcy's Law and an accurate chemical equilibrium approach as originally implemented in EOS7C is used for calculation of the solubilities of different mass components. EOS7MG was designed to allow flexible number of components based on the number of gases included in the model. The potential application of this module may include subsurface gas storage, energy storage, CCS, enhanced gas recovery, and more.

Zhang, Keni↗

NASA NTRS1971

An analysis of approach navigation accuracy and guidance requirements for the grand tour mission to the outer planets

The navigation and guidance process for the Jupiter, Saturn and Uranus planetary encounter phases of the 1977 Grand Tour interior mission was simulated. Reference approach navigation accuracies were defined and the relative information content of the various observation types were evaluated. Reference encounter guidance requirements were defined, sensitivities to assumed simulation model parameters were determined and the adequacy of the linear estimation theory was assessed. A linear sequential estimator was used to provide an estimate of the augmented state vector, consisting of the six state variables of position and velocity plus the three components of a planet position bias. The guidance process was simulated using a nonspherical model of the execution errors. Computation algorithms which simulate the navigation and guidance process were derived from theory and implemented into two research-oriented computer programs, written in FORTRAN.

Jones, D. W.↗

NASA NTRS1988

Dopant redistribution during the solid-phase growth of CrSi2 on Si(100)

The distribution pattern of As, B, and P dopants during the solid-phase growth of CrSi2 on Si(100) was investigated using Rutherford backscattering spectroscopy and SIMS. The results demonstrated that all three dopants did redistribute during the formation of CrSi2 layers; however, the nature of redistribution was different for different dopants. While B and P were transported from the Si substrate to the surface of the growing CrS2 layer, As accumulated at the CrSi2/Si interface. The formation of silicide was found to be inhibited by large concentrations of As. A model was developed to explain these results.

Rockett, A.↗

NASA NTRS1990

A computer module used to calculate the horizontal control surface size of a conceptual aircraft design

The creation of a computer module used to calculate the size of the horizontal control surfaces of a conceptual aircraft design is discussed. The control surface size is determined by first calculating the size needed to rotate the aircraft during takeoff, and, second, by determining if the calculated size is large enough to maintain stability of the aircraft throughout any specified mission. The tail size needed to rotate during takeoff is calculated from a summation of forces about the main landing gear of the aircraft. The stability of the aircraft is determined from a summation of forces about the center of gravity during different phases of the aircraft's flight. Included in the horizontal control surface analysis are: downwash effects on an aft tail, upwash effects on a forward canard, and effects due to flight in close proximity to the ground. Comparisons of production aircraft with numerical models show good accuracy for control surface sizing. A modified canard design verified the accuracy of the module for canard configurations. Added to this stability and control module is a subroutine that determines one of the three design variables, for a stable vectored thrust aircraft. These include forward thrust nozzle position, aft thrust nozzle angle, and forward thrust split.

Sandlin, Doral R.↗

NASA NTRS1999

Combustion of a Polymer (PMMA) Sphere in Microgravity

A series of low gravity, aircraft-based, experiments was conducted to investigate the combustion of supported thermoplastic polymer spheres under varying ambient conditions. The three types of thermoplastic investigated were polymethylmethacrylate (PMMA), polypropylene (PP). and polystyrene (PS). Spheres with diameters ranging from 2 mm to 6.35 mm were tested. The total initial pressure varied from 0.05 MPa to 0. 15 MPa whereas the ambient oxygen concentration varied from 19 % to 30 % (by volume). The ignition system consisted of a pair of retractable energized coils. Two CCD cameras recorded the burning histories of the spheres. The video sequences revealed a number of dynamic events including bubbling and sputtering, as well as soot shell formation and break-up during combustion of the spheres at reduced gravity. The ejection of combusting material from the burning spheres represents a fire hazard that must be considered at reduced gravity. The ejection process was found to be sensitive to polymer type. All average burning rates were measured to increase with initial sphere diameter and oxygen concentration, whereas the initial pressure had little effect. The three thermoplastic types exhibited different burning characteristics. For the same initial conditions, the burning rate of PP was slower than PMMA, whereas the burning rate of PS was comparable to PMMA. The transient diameter of the burning thermoplastic exhibited two distinct periods: an initial period (enduring approximately half of the total burn duration) when the diameter remained approximately constant, and a final period when the square of the diameter linearly decreased with time. A simple homogeneous two-phase model was developed to understand the changing diameter of the burning sphere. Its value is based on a competition between diameter reduction due to mass loss from burning and sputtering, and diameter expansion due to the processes of swelling (density decrease with heating) and bubble growth. The model relies on empirical parameters for input, such as the burning rate and the duration of the initial and final burning periods.

Yang, Jiann C.↗

NASA NTRS2001

Global Modeling of Tropospheric Chemistry with Assimilated Meteorology: Model Description and Evaluation

We present a first description and evaluation of GEOS-CHEM, a global three-dimensional (3-D) model of tropospheric chemistry driven by assimilated meteorological observations from the Goddard Earth Observing System (GEOS) of the NASA Data Assimilation Office (DAO). The model is applied to a 1-year simulation of tropospheric ozone-NOx-hydrocarbon chemistry for 1994, and is evaluated with observations both for 1994 and for other years. It reproduces usually to within 10 ppb the concentrations of ozone observed from the worldwide ozonesonde data network. It simulates correctly the seasonal phases and amplitudes of ozone concentrations for different regions and altitudes, but tends to underestimate the seasonal amplitude at northern midlatitudes. Observed concentrations of NO and peroxyacetylnitrate (PAN) observed in aircraft campaigns are generally reproduced to within a factor of 2 and often much better. Concentrations of HNO3 in the remote troposphere are overestimated typically by a factor of 2-3, a common problem in global models that may reflect a combination of insufficient precipitation scavenging and gas-aerosol partitioning not resolved by the model. The model yields an atmospheric lifetime of methylchloroform (proxy for global OH) of 5.1 years, as compared to a best estimate from observations of 5.5 plus or minus 0.8 years, and simulates H2O2 concentrations observed from aircraft with significant regional disagreements but no global bias. The OH concentrations are approximately 20% higher than in our previous global 3-D model which included an UV-absorbing aerosol. Concentrations of CO tend to be underestimated by the model, often by 10-30 ppb, which could reflect a combination of excessive OH (a 20% decrease in model OH could be accommodated by the methylchloroform constraint) and an underestimate of CO sources (particularly biogenic). The model underestimates observed acetone concentrations over the South Pacific in fall by a factor of 3; a missing source from the ocean may be implicated.

Bey, Isabelle↗

NASA NTRS2012

The Kinematic and Microphysical Control of Storm Integrated Lightning Flash Extent

The objective of this preliminary study is to investigate the kinematic and microphysical control of lightning properties, particularly those that may govern the production of nitrogen oxides (NOx) in thunderstorms, such as flash rate, type and extent. The mixed-phase region is where the noninductive charging (NIC) process is thought to generate most storm electrification during rebounding collisions between ice particles in the presence of supercooled water. As a result, prior radar-based studies have demonstrated that lightning flash rate is well correlated to kinematic and microphysical properties in the mixed-phase region of thunderstorms such as updraft volume, graupel mass, or ice mass flux. There is also some evidence that lightning type is associated with the convective state. Intracloud (IC) lightning tends to dominate during the updraft accumulation of precipitation ice mass while cloud-to-ground (CG) lightning is more numerous during the downdraft-driven descent of radar echo associated with graupel and hail. More study is required to generalize these relationships, especially regarding lightning type, in a wide variety of storm modes and meteorological conditions. Less is known about the co-evolving relationship between storm kinematics, microphysics, morphology and three-dimensional flash extent, despite its importance for lightning NOx production. To address this conceptual gap, the NASA MSFC Lightning Nitrogen Oxides Model (LNOM) is applied to North Alabama Lightning Mapping Array (NALMA) and Vaisala National Lightning Detection NetworkTM (NLDN) observations following ordinary convective cells through their lifecycle. LNOM provides estimates of flash type, channel length distributions, lightning segment altitude distributions (SADs) and lightning NOx production profiles. For this study, LNOM is applied in a Lagrangian sense to well isolated convective cells on 3 April 2007 (single cell and multi-cell hailstorm, non-severe multicell) and 6 July 2007 (non-severe multi-cell) over Northern Alabama. The LNOM lightning characteristics are compared to the evolution of updraft and precipitation properties inferred from dual-Doppler and polarimetric radar analyses applied to observations from a nearby Doppler radar network, including the UA Huntsville Advanced Radar for Meteorological and Operational Research (ARMOR, C-band, polarimetric). The LNOM estimated SAD and lightning NOx production profiles are placed in the context of radar derived profiles of vertical motion, precipitation types and amounts. Finally, these analyses are used to determine if storm integrated flash channel extent is as well correlated to volumetric updraft and precipitation ice characteristics in the mixed phase region as flash rate for these individual convective cells.

Carey, Lawrence↗

DOE OSTI2021

Evaluation of CMIP6 models in simulating the statistics of extreme precipitation over Eastern Africa

We report the Eastern Africa region experiences frequent extreme precipitation events that can cause destruction of property and environment, and loss of lives. Thus, there is a need to understand how these events may change in the future and how well the global climate models that are used to make projections can simulate precipitation extremes in this region before they can be used in downscaling or flood and drought impact assessment studies. In this work, we evaluated the ability of sixteen Coupled Model Intercomparison Project Phase 6 (CMIP6) models to simulate present-day precipitation extremes over the Eastern Africa region during the two rainy seasons (March–May and September–November). We used nine extreme precipitation indices (including seven (one) indices of wet (dry) extremes) defined by the Expert Team on Climate Change Detection and Indices. The CMIP6 models were evaluated against two gridded observation datasets: Global Precipitation Climatology Project One-Degree Daily Dataset and Tropical Rainfall Measuring Mission Multi-satellite Precipitation Analysis 3B42. Three model performance metrics (percentage bias, normalized root-mean-square error, and pattern correlation coefficient) were employed to further assess the strengths and weakness of the models. Our results show that the multi-model ensemble mean generally provides a better representation of observed precipitation and related extremes compared to individual models when considering all metrics and seasons. Several consistent biases are evident across CMIP6 models, which tend to overestimate the total-wet day precipitation and consecutive wet days, and underestimate very wet days and maximum 5-day precipitation in both seasons. Furthermore, no single model consistently performs best, model performance varies with the season and index under consideration and is generally independent of horizontal resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Mo 4 FeGa 17.25– x Ge x : Complementary Point Substitutions, Buffering Frameworks, and Merging of the 18-n and Octet Bonding Schemes

We present the discovery of Mo 4 FeGa 17.25–x Ge x (x ∼ 2.1(4), based on determination of Ge content), a complex gallide featuring a variety of point substitution phenomena. Its crystal structure is derived from the Ti 2 Ni type, in which a diamond network of face-sharing octahedra is interpenetrated by a second diamond network of vertex-sharing stella quadrangula. However, while in the ideal Ti 2 Ni type these two frameworks run uninterrupted through the crystal, Mo 4 FeGa 17.25–x Ge x shows three variations. First, the inner tetrahedron of every other stella quadrangula is replaced with a main group atom, creating tetrahedra reminiscent of the Zintl phase NaTl. Next, a selection of Ga 6 octahedra are filled with Fe atoms, in a manner analogous to the stuffed AuCu 3 -type phases. Finally, the refined crystal structure shows that in each unit cell a single Ga2 atom in the octahedral network is substituted with a dumbbell of Ga/Ge atoms. Electronic structure calculations on ordered models of Mo 4 FeGa 17.25–x Ge x reveal a narrow band near the Fermi energy, which is explained in terms of the 18-n and octet bonding schemes using reversed approximation Molecular Orbital analysis. A DFT-chemical pressure analysis connects the tetrahedron/atom and atom/dumbbell substitutions to the relief of atomic packing tensions and highlights soft atomic motions within the octahedral framework and driving forces for atom/dumbbell substitution. The combination of soft vibrational modes, disorder, and a narrow band gap could make this phase of interest for potential thermoelectric properties.

Chemical structure↗

DOE OSTI2023

Scrambling and operator entanglement in local non-Hermitian quantum systems

The breakdown of Lieb-Robinson bounds in local, non-Hermitian quantum systems opens up the possibility for a rich landscape of quantum many-body phenomenology. We elucidate this by studying information scrambling and quantum chaos in non-Hermitian variants of paradigmatic local quantum spin-chain models. We utilize a mixture of exact diagonalization and tensor network techniques for our numerical results and focus on three dynamical quantities: (i) out-of-time-ordered correlators (OTOCs), (ii) operator entanglement of the dynamics, and (iii) entanglement growth following a quench from product initial states. We show that while OTOCs fail to capture information scrambling in a simple, local, non-Hermitian transverse-field Ising model, the closely related operator entanglement is a robust measure of dynamical properties of interest. Moreover, we show that the short-time growth of operator entanglement can generically detect entanglement phase transitions in these systems while its long-time average is shown to be a reliable indicator of quantum chaos and entanglement phases. This allows us to extend operator entanglement-based diagnostics from previous works on closed and open quantum systems, to the new arena of monitored quantum dynamics. Finally, we remark on the efficacy of these dynamical quantities in detecting integrability/chaos in the presence of continuous monitoring.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗