Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tectonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Tessera Terrain on Venus: A Survey of the Global Distribution, Characteristics, and Relation to Surrounding Units from Magellan Data

The tessera terrain on Venus, comprised of areas of high radar backscatter, complex deformation patterns relative to other units, and topography standing higher than surrounding plains, covers approximately 35.33 x 10(exp 6)sq km, about 8% of the surface of Venus, and is nonrandomly distributed, being preferentially located at equatorial and higher northern latitudes with a distinct paucity below about 30degS. Individual tessera occurrences range in area from the lower limits of our measurements (about 200 sq km) up to the largest tessera, Ovda, with an area of about 8.6 x 10(exp 6)sq km, or about 2% of the surface area of Venus. The size-frequency distribution of tessera patches is strongly unimodal and skewed toward smaller sizes, reflecting the great abundance of small tessera fragments. Modes of occurrence include (1) large clusters (e.g., Aphrodite Terra and Ishtar Terra); (2) arc-like segments which may extend for thousands of kilometers and are either concave inward toward the major tessera cluster development or away from it; (3) areas where tesserae are rare or absent which occur both as low-lying plains (e.g., Guinevere Planitia), and as elevated regions (e.g., Ata Regio). Tessera terrain has a bimodal elevation-frequency distribution, with the main peak at about 0- 1 km and an additional peak at about 3 km above mean planetary radius. In terms of number of occurrences, however, tesserae do not display a correlation with elevation at the global scale, since small tessera patches commonly occupy low-lying regions. Although tessera exhibit a range of gravity signatures, many occurrences are interpreted to represent relatively shallow (crustal) levels of compensation. Tessera boundaries include Type I (sinuous/embayed, dominated by adjacent lava plains embaying tessera massifs; 73% of total tesserae boundaries) and Type II (linear/tectonic). Only a small percentage of the length of all boundary types show no lava embayment and could be interpreted as tectonically active for long periods subsequent to initial tessera formation. Occurrence of broad slopes of post-tessem embayed plains away from tessera boundaries suggests that regional tilting occurred subsequent to final temra deformation in some places.

Ivanov, Mikhail↗
NASA NTRS1998

Chasma Australe Mars: Structural Framework for a Catastrophic Outflow Origin

Chasma Australe is the most remarkable of the martian south pole erosional reentrants carved in the polar layered deposits. Ms chasma originates near the south pole and runs across the polar troughs over a distance of about 500 km. Its width varies between 20 and 80 km and, with a depth up to 1000 m, it reaches the bedrock. Following an idea put forward originally for Chasma Boreale, we propose for the genesis of Chasma Australe a mechanism of catastrophic outflow preceded by a tectonically induced powerful sapping process. A detailed geomorphological analysis of Chasma Australe shows erosional and depositional features that can be interpreted as produced by the motion of a fluid. Like other polar reentrants, Chasma Australe is clearly assymetric, with a steep eastern margin where basal and lateral erosion prevailed, and a gentler western side, where the stepped topography and bedrock spurs favored deposition.

Anguita, F.↗
NASA NTRS1999

Petrology and Geochemistry of a Mg- and Al-Rich Orthopyroxenite Xenolith in the EETA79001 Shergottite: Implications for Mars Crustal Evolution

EETA79001 is a Mars meteorite (SNC) consisting of multiple rock types, including two basalt types, olivine and pyroxene xenocrysts, and ultramafic xenoliths. This study is focused on the petrology and geochemistry of one orthopyroxenite xenolith in PTS 68, designated X-1. It consists of chemically homogeneous orthopyroxene cores with exceptionally high Mg/Fe (mg#=85) and Al. Cores are permeated by minute high-Si+Al glassy inclusions, some with augite microlites. Magnesian core areas are mantled by more Fe-rich orthopyroxene rims grading to pigeonite away from cores. The xenolith is transected by cross-cutting shear planes, some of pre-incorporation origin. Major and minor element composition and variation suggest that core areas are primarily igneous, crystallized from a high temperature mafic melt. However, nearly constant mg# across cores suggest metamorphic equilibration. Si+Al inclusions may result from, among other processes, exsolution of feldspathic material during subsolidus cooling, or may be solid materials (alkali feldspar) poikilitically enclosed by growing igneous orthopyroxene crystals. Late reaction with more fractionated melts produced Fe-rich mantles, the whole assemblage later cut by tectonic micro-shear planes. Raw electron microprobe data produced during this study are available on request from the author.

Berkley, John L.↗
NASA NTRS1999

Geoscience Applications of Airborne and Spaceborne Lidar Altimetry

Recent advances in lidar altimetry technology have enabled new methods to describe the vertical structure of the Earth's surface with great accuracy. Application of these methods in several geoscience disciplines will be described. Airborne characterization of vegetation canopy structure will be illustrated, including a validation of lidar-derived Canopy Height Profiles for closed-canopy, broadleaf forests. Airborne detection of tectonic landforms beneath dense canopy will also be illustrated, with an application mapping active fault traces in the Puget Lowland of Washington state for earthquake hazard assessment purposes. Application of data from the first and second flights of the Shuttle Laser Altimeter will also be discussed in an assessment of global digital elevation model accuracy and error characteristics. Two upcoming space flight missions will be described, the Vegetation Canopy Lidar (VCL) and the Ice, Cloud and Land Elevation Mission (ICESat), which will provide comprehensive lidar altimeter observations of the Earth's topography and vegetation cover.

Harding David J.↗
NASA NTRS1999

Global Velocities from VLBI

Precise geodetic Very Long Baseline Interferometry (VLBI) measurements have been made since 1979 at about 130 points on all major tectonic plates, including stable interiors and deformation zones. From the data set of about 2900 observing sessions and about 2.3 million observations, useful three-dimensional velocities can be derived for about 80 sites using an incremental least-squares adjustment of terrestrial, celestial, Earth rotation and site/session-specific parameters. The long history and high precision of the data yield formal errors for horizontal velocity as low as 0.1 mm/yr, but the limitation on the interpretation of individual site velocities is the tie to the terrestrial reference frame. Our studies indicate that the effect of converting precise relative VLBI velocities to individual site velocities is an error floor of about 0.4 mm/yr. Most VLBI horizontal velocities in stable plate interiors agree with the NUVEL-1A model, but there are significant departures in Africa and the Pacific. Vertical precision is worse by a factor of 2-3, and there are significant non-zero values that can be interpreted as post-glacial rebound, regional effects, and local disturbances.

Ma, Chopo↗
NASA NTRS1999

Mass Transport in Global Geophysical Fluids

Mass transports occurring in the atmosphere-hydrosphere-solid Earth-core system (the "global geophysical fluids") are important geophysical phenomena. They occur on all temporal and spatial scales. Examples include air mass and ocean circulations, tides, hydrological water redistribution, mantle processes such as post-glacial rebound, earthquakes and tectonic motions, and core geodynamo activities. With only a few exceptions on the Earth surface, the temporal history and spatial pattern of such mass transport are often not amenable to direct observations. Space geodesy techniques, however, have the capability of monitoring certain direct consequences of the mass transport, including Earth's rotation variations, gravitational field variations, and the geocenter motion. These techniques include the very-long-baseline interferometry, satellite laser ranging and Doppler tracking, and the Global Positioning System, all entail global observational networks. While considerable advances have been made in observing and understanding of the dynamics of Earth's rotation, only the lowest-degree gravitational variations have been observed and limited knowledge of geocenter motion obtained. New space missions, projects and initiatives promise to further improve the measurements and hence our knowledge about the global mass transports. The latter contributes to our understanding and modeling capability of the geophysical processes that produce and regulate the mass transports, as well as the solid Earth's response to such changes in constraining the modeling of Earth's mechanical properties.

Chao, B. F.↗
NASA NTRS1995

Large Topographic Rises on Venus: Implications for Mantle Upwelling

Topographic rises on Venus have been identified that are interpreted to be the surface manifestation of mantle upwellings. These features are classified into groups based on their dominant morphology. Atla and Beta Regiones are classified as rift-dominated, Dione, western Eistla, Bell, and Imdr Regiones as volcano-dominated, and Themis, eastern Eistla, and central Eistla Regiones as corona-dominated. At several topographic rises, geologic indicators were identified that may provide evidence of uplifted topography (e.g., volcanic flow features trending upslope). We assessed the minimum contribution of volcanic construction to the topography of each rise, which in general represents less than 5% of the volume of the rise, similar to the volumes of edifices at terrestrial hotspot swells. The total melt volume at each rise is approximated to be 10(exp 4) - 10(exp 6) cu km. The variations in morphology, topography, and gravity signatures at topographic rises are not interpreted to indicate variations in stage of evolution of a mantle upwelling. Instead, the morphologic variations between the three classes of topographic rises are interpreted to indicate the varying influences of lithospheric structure, plume characteristics, and regional tectonic environment. Within each class, variations in topography, gravity, and amount of volcanism may be indicative of differing stages of evolution. The similarity between swell and volcanic volumes for terrestrial and Venusian hotspots implies comparable time-integrated plume strengths for individual upwellings on the two planets.

Stofan, Ellen R.↗
NASA NTRS1999

Re-naming D Double Prime

"Knowledge about the dynamics of the D double prime region is a key to unlock some fundamental mysteries of the Earth heat engine which governs a wide range of global geophysical processes from tectonics to geodynamo." This benign sentence makes complete sense to many geophysicists. But for many others, it makes sense all except the odd nomenclature "D double prime". One knows about the crust, upper and lower mantle, outer and inner core, but where is the D double prime region? What meaning does it try to convey? Where is D prime region, or D, or A, B, C regions for that matter, and are there higher-order primes? How does such an odd name come about anyway? D double prime, or more "simply" D", is a generic designation given to the thin shell, about 200 km thick, of the lowermost mantle just above the core-mantle boundary inside the Earth. Incidentally, whether D" is "simpler" than "D double prime" depends on whether you are pronouncing it or writing/typing it; and D" can be confusing to readers in distinguishing quotation marks (such as in the above sentences) and second derivatives, and to word processors in spelling check and indexing.

Chao, Benjamin F.↗
NASA NTRS1998

Geologic Landforms and Processes on Icy Satellites

During the first reconaissence of the satellites of the outer solar system conducted by the Voyager missions (1979-1989), a surprising diversity of unusual geologic landforms were observed, in some cases with bewildering complexity (e.g., Triton). Impact features were certainly expected but the variety of volcanic, diapiric, tectonic, impact, and erosional landforms was only remotely suggested by some early theoretical works. These diagnostic features are manifestations of the internal composition, thermal history, and dynamical evolution of these bodies. It is the job of the geologist to interpret the morphology, stratigraphy, and composition of these deposits and structures to ascertain what materials were mobilized in the interior, in what amount, and the mechanism and cause of their mobilization. In this chapter, we review what is know about these features and what constraints can be placed on composition and thermal history. Particular emphasis is placed on volcanic features, as these are most directly related to satellite composition and thermal history. The surface spectra, high albedos, and low bulk densities of the satellites of the outer solar system indicate that water and other ices are abundant on these bodies, particularly on their surfaces. Ices, particularly water ice, are less dense than silicates and will tend to float and form crusts during differentiation or partial melting of the interior. Ices therefore take the place of silicates as 'crust-forming' minerals and dominate geologic processes on icy satellites. Melted ices form magma bodies, and sometimes are extruded as lavas, an unusual but still valid perspective for terrestrial geologists. The unusual properties of some ices, including their low melting temperatures, and low strengths (as well as the decrease in density on the freezing of water ice), will ultimately be very important in interpreting this record.

Schenk, Paul M.↗
NASA NTRS1999

The Hypothesis of Caves on Mars Revisited Through MGS Data; Their Potential as Targets for the Surveyor Program

In a previous publication, we proposed the formation of caves at mega and microscale on Mars and emphasized their potential for the exobiology exploration. The recent MOC images have shown promising indicators that caves are actually existing on Mars. In the first section, we develop the theoretical potential formation of martian caves. Then, we show how MOC is supporting this hypothesis of their formation and the new types of environments it suggests. The existence of caves on Mars from microscale to microscale structures can be predicted according to the Mars geological and climatic history. A first global approach is to consider caves as a result of underground water activity combined with tectonic movement. They can be formed by: (1) diversion of channel courses in underground conduits; (2) fractures of surface drainage patterns; chaotic terrain and collapsed areas in general; (4) seepage face in valley walls and/or headwaters; (5) inactive hydrothermal vents and lava tubes.

Grin, E. A.↗
NASA NTRS1999

Co-Seismic Mass Dislocation and Its Effect on Earth's Rotation and Gravity

Mantle processes often involve large-scale mass transport, ranging from mantle convection, tectonic motions, glacial isostatic adjustment, to tides, atmospheric and oceanic loadings, volcanism and seismicity. On very short time scale of less than an hour, co-seismic event, apart from the "shaking" that is the earthquake, leaves behind permanent (step-function-like) dislocations in the crust and mantle. This redistribution of mass changes the Earth's inertia tensor (and hence Earth's rotation in both length-of-day and polar motion), and the gravity field (in terms of spherical harmonic Stokes coefficients). The question is whether these effects are large enough to be of any significance. In this paper we report updated calculation results. The calculation uses the normal mode summation scheme, applied to 15,814 major earthquakes that occurred during 1976-1998, according to source mechanism solutions given by the Harvard Central Moment Tensor catalog. Compared to the truly large ones earlier in the century, the earthquakes we study are individually all too small to have left any discernible signature in geodetic records of Earth rotation or global gravity field. However, their collective effects continue to exhibit an extremely strong statistical tendencies. For example, earthquakes conspire to decrease J(sub 2) and J(sub 22) while shortening LOD, resulting in a rounder and more compact Earth. Strong tendency is also seen in the earthquakes trying to "nudge" the Earth rotation pole towards about 140 degree E, roughly opposite to the observed polar drift direction. The geophysical significance and implications will be further studied.

Chao, Benjamin F.↗
NASA NTRS1999

The Enigmatic Longevity of Granular Materials on Mars: The Case for Geologically Episodic Dune Formation

Martian sand dunes are concentrated in vast sand seas in the circumpolar belt of the planet's northern hemisphere, but they are also pervasive over the whole planet. Their occurrence is to be expected on a super-arid planetary surface subjected to boundary layer drag from a continually active atmosphere. Whilst their occurrence is to be expected, their survival is enigmatic. But the enigma only arises if the martian system is considered similar to Earth's --where sand is moved highly frequently, more or less on a seasonal basis. Experimentally it is readily demonstrated that active sand will soon wear down to small grains and eventually diminish to below the critical sand size required to sustain dune formation. According to conventional wisdom, sand moves at higher speeds on Mars than on Earth, and if it were to move as frequently as it does on Earth, then the dune-forming sand population should have long since disappeared, given the great longevity of the martian aeolian system (Sagan coined the term "kamikaze" grains to express this disappearance). No supply of sand could keep pace with this depletion, especially in light of the fact that Mars does not have very active weathering, nor significant crustal differentiation. On Earth, plate tectonics, magmatic activity, and general crustal differentiation over geological time have produced great concentrations of quartz crystals in the continental crustal masses. Not only are these quartz grains chemically and mechanically resilient, they are about the right size for being transported by either wind or water. Add to this, the geologically recent contribution of glacial grinding, and it is easy to see why there are dune field on Earth. So what are the martian dunes composed of, and how does the material survive the eons of attrition? In addition to experimental demonstrations of sand comminution in laboratory aeolian simulations, the problem can be approached from first principles. Sagan showed that by simple considerations of material strength versus mechanical work applied to the material, comminution to sub-sand size would be inevitable. Another semi-analytical approach might be taken by considering that the archetypal aeolian sand surface texture is an irregularly pitted ("frosted") surface composed of chipping hollows approximately 10 microns in diameter, 5 microns deep. Their volume = about 250 cubic microns, or about 1/25000 of the volume of a 100 micron diameter dune grain. Because a saltating grain always strikes another grain, then two surfaces are impacted. Thus each grain undergoes two impacts for every one saltation leap, when the impact statistics are considered for a closed dune system (it can be calculated that a grain can never undergo <1 impact, and never >2 per saltation leap). Hence, if we conservatively assume that there is damage to a grain each time it bounces, but with the minimum damage of only 2 microscopic craters per impact, then approximately 12,500 impacts are required to completely eliminate the grain. Of course, it would require only a fraction of this amount to reduce the grain to below sand size. A grain will make only several tens of saltation leaps on the stoss side of a dune before becoming buried on the lee slope. The dune then has to move its full length before the grain is exhumed again for abrasion. Even with this hiatus in transport, it is easy to see that terrestrial dunes need resupplying with sand in order to survive. In recent theoretical work it has been shown that martian aeolian transport may be initiated with high-speed grains, but this converts to a lower energy dynamic transport equilibrium in which a reptation population dominates grain transport (on Earth, at least half of the flux is by reptation and creep). On Mars, therefore, average grain speeds may be lower than those on Earth, or at least comparable. This would permit greater longevity for martian sands, but it would not go far enough to solve the survival problem. It may, however, explain why martian dunes are about the same size as terrestrial dunes. If martian saltation leaps were significantly longer than on Earth (as usually assumed), then a dune's lee slope would have to be correspondingly longer in order to trap the sand; this would scale up the whole dune structure. But with shorter trajectories in a reptation population, larger dunes would be unnecessary. Additional information is contained in the original.

Marshall, J.↗
NASA NTRS1997

Striations, Polish, and Related Features from Clasts in Impact-Ejecta Deposits and the "Tillite Problem"

Proximal ejecta deposits related to three large terrestrial impacts, the 14.8-Ma Ries impact structure in Germany (the Bunte Breccia), the 65-Ma Chicxulub impact structure in the Yucatan (the Albion and Pook's Hill Diamictites in Belize) and the mid-Tertiary Azuara impact structure in Spain (the Pelarda Fm.) occur in the form of widespread debris-flow deposits most likely originating from ballistic processes. These impact-related diamictites typically are poorly sorted, containing grain sizes from clay to large boulders and blocks, and commonly display evidence of mass flow, including preferred orientation of long axes of clasts, class imbrication, flow noses, plugs and pods of coarse debris, and internal shear planes. Clasts of various lithologies show faceting, various degrees of rounding, striations (including nailhead striae), crescentic chattermarks, mirror-like polish, percussion marks, pitting, and penetration features. Considering the impact history of the Earth, it is surprising that so few ballistic ejecta, deposits have been discovered, unless the preservation potential is extremely low, or such materials exist but have been overlooked or misidentified as other types of geologic deposits . Debris-flow diamictites of various kinds have been reported in the geologic record, but these are commonly attributed to glaciation based on the coarse and poorly sorted nature of the deposits and, in many cases, on the presence of clasts showing features considered diagnostic of glacial action, including striations of various kinds, polish, and pitting. These diamictites are the primary evidence for ancient ice ages. We present evidence of the surface features on clasts from known proximal ejecta debris-flow deposits and compare these features with those reported in diamictites. interpreted as ancient glacial deposits (tillites). Our purpose is to document the types of features seen on clasts in diamictites of ejecta origin in order to help in the interpretation of the origin of ancient diamictites. The recognition of characteristic features in clast populations in ancient diamictites may allow identification and discrimination of debris-flow deposits of various origins (e.g., impact glacial, tectonic) and may shed light on some climatic paradoxes, such as inferred Proterozoic glaciations at low paleolatitudes.

Rampino, M. R.↗
NASA NTRS1997

Cryptoblemes: A New Discovery with Major Economic Implications and Profound Changes to the Geologic Paradigm

Cryptoblemes are subtle impact shock signatures imprinted by cosmic debris on the crustal surfaces of lunar planetary bodes. These signatures constitute a complex cumulative overprinting of topographic, structural geophysical, and tectonic patterns that have a conspicuous radial centric multiringed symmetry. The geometry and distribution of cryptoblemes on Earth is comparable to the size and density of impact features on lunar planetary surfaces. Analysis of satellite imagery, sea-floor sonar, side-looking radar and aerial photographs of specific sites reveals new criteria for the identification and confirmation of impact-shock signatures. These criteria include joint and foliation patterns with asbestiform minerals, ribbon-quartz, spheroidal weathering, domal exfoliation, pencil shale, and shock spheres, which may originate from hydrocavitation of water-saturated sedimentary rocks. Cryptoblemes may also be associated with breccia pipes, sinkholes, buttes, mesas, and bogs, high-Rn anomalies, nodular concentrations, and earthquake epicenters. Major implications of cryptobleme identification include exploratory targeting of hydrocarbon and mineral deposits and the explanation of their origins. Analysis of known mineral deposits, structural traps and sedimentary basins show a direct correlation with cryptobleme patterns. Significant geologic paradigm shifts related to cryptoblemes include mountain building processes, structural orogenies, induced volcanism, earthquake origins, hydrocarbon diagenesis, formation mineral deposits, continental rifting, and plate movements, magnetic overprinting and local regional, and global geologic extinction and speciation patterns. Two figures provide a comparison between a multiring impact overprint in water and multiring cryptobleme in the U.S. basin range. (Additional information is contained in the original document).

Windolph, J., Jr.↗
NASA NTRS1998

Modern Uplift of the Transantarctic Mountains: Preliminary Results of an Autonomous GPS Array

An autonomous GPS array is being implemented in the Transantarctic Mountains, sponsored by NSF and NASA, for the purpose of measuring uplift resulting from post-glacial rebound (PGR). The rebound of the solid earth due to unloading of ice since the Last Glacial Maximum is expected to dominate the measured uplift for most of West Antarctica, dwarfing the signals due to present-day ice sheet mass balance changes and tectonic motion, as long as mantle viscosity is greater than about 10(exp 20) Pa-s. Predicted uplift patterns have been calculated for a range of model scenarios, which illustrate how the uplift pattern might distinguish between different-sized ice sheets and deglaciation histories as represented by the competing models. The scenarios considered by James and Ivins (1998) include ICE-3G, CLIMAP and a variation of the CLIMAP model by Denton et al. For these models, peak uplift rates occur in the Transantarctic Mountains, and differences between models is often large there. Thus, the Transantarctic Mountains are an ideal place to obtain uplift measurements to constrain deglaciation models.

Raymond, C. A.↗
NASA NTRS2000

The Shuttle Radar Topography Mission: A Global DEM

Digital topographic data are critical for a variety of civilian, commercial, and military applications. Scientists use Digital Elevation Models (DEM) to map drainage patterns and ecosystems, and to monitor land surface changes over time. The mountain-building effects of tectonics and the climatic effects of erosion can also be modeled with DEW The data's military applications include mission planning and rehearsal, modeling and simulation. Commercial applications include determining locations for cellular phone towers, enhanced ground proximity warning systems for aircraft, and improved maps for backpackers. The Shuttle Radar Topography Mission (SRTM) (Fig. 1), is a cooperative project between NASA and the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense. The mission is designed to use a single-pass radar interferometer to produce a digital elevation model of the Earth's land surface between about 60 degrees north and south latitude. The DEM will have 30 m pixel spacing and about 15 m vertical errors.

Farr, Tom G.↗
NASA NTRS2000

Bridging Two Worlds: From the Archean to the Proterozoic

As now known, the Archean and Proterozoic appear to have been different worlds: the geology (tectonic style, basinal distribution, dominant rock types), atmospheric composition (O2, CO21, CH4), and surface environment (day-length, solar luminosity, ambient temperature) all appear to have changed over time. And virtually all paleobiologic indicators can be interpreted as suggesting there were significant biotic differences as well: (1) Stromatolites older than 2.5 Ga are rare relative to those of the Proterozoic; their biotic components are largely unknown; and the biogenicity of those older than approx. 3.2 Ga has been questioned. (2) Bona fide microfossils older than approx. 2.4 Ga are rare, poorly preserved, and of uncertain biological relations. Gaps of hundreds of millions of years in the known record make it impossible to show that Archean microorganisms are definitely part of the 2.4 Ga-to-present evolutionary continuum. and (3) In rocks older than approx. 2.2 Ga, the sulfur isotopic record is subject to controversy; phylogenetically distinctive bio-markers are unknown; and nearly a score of geologic units contain organic carbon anomalously light isotopically (relative to that of the Proterozoic and Phanerozoic) that may reflect the presence of Archaeans ("Archaebacteria of earlier classifications) but may not (since cellularly preserved Archean-age Archaeans have never been identified).

Schopf, J. William↗
NASA NTRS2000

Item Description: ISS TransHab Restraint Sample and Photo Documentation

The yellow strap seen in the display is a piece of the main restraint layer of a test article for the ISS TransHab spacecraft, First conceived as a technology which is capable of supporting a [human] crew of six on an extended space journey such as the six-month trip to Mars, TransHab (short for "Transit habitat") is the first space inflatable module ever designed. As this text is written it is being considered as a replacement for the Habitation module on the International Space Station (ISS). It constitutes a major breakthrough both in technology and in tectonics: capable of tight packaging at light weight for efficient launch, the vehicle can then be inflated to its full size on orbit via its own inflation tanks. This is made possible by the separation of its main structural elements from its pressure-shell. In other words, all spacecraft flown to date have been of an exoskeletal type---i.e., its hard outer shell acts both as a pressure container and as its main channel for structural loading This includes the ISS, which is currently under construction in Low Earth Orbit [275 miles above the Earth]. By contrast TransHab is the first endoskeletal space Habitat, consisting of a dual system: a light, reconfigurable central structure of graphite composite and a multilayered, deployable pressure shell.

Adams, Constance↗