Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulated current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Comparison of simulated neutrino emission models with data on Supernova 1987A

Here we compare models of supernova (SN) neutrino emission with the Kamiokande II data on SN 1987A using the Bayesian approach. These models are taken from simulations and are representative of current one-dimensional SN models. We find that models with a brief accretion phase of neutrino emission are the most favored. This result is not affected by varying the overall flux normalization or considering neutrino oscillations. We also check the compatibility of the best-fit models with the data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct, Absolute, and In Situ Measurement of Fast Electron Transport via Cherenkov Emission

We present direct measurements of the absolute energy distribution of relativistic electrons generated in intense, femtosecond laser interaction with a solid. Cherenkov emission radiated by these electrons in a novel prism target is spectrally dispersed to obtain yield and energy distribution of electrons simultaneously. A crucial advance is the observation of high density electron current as predicted by particle simulations and its transport as it happens inside the target. In addition, the strong sheath potential present at the rear side of the target is inferred from a comparison of the electron spectra derived from Cherenkov light observation with that from a magnet spectrometer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-Principles Theory of the Relativistic Magnetic Reconnection Rate in Astrophysical Pair Plasmas

In this paper, we develop a first-principles model for the relativistic magnetic reconnection rate in strongly magnetized pair plasmas. By considering the energy budget and required current density near the x-line, we analytically show that in the magnetically dominated relativistic regime, the x-line thermal pressure is significantly lower than the upstream magnetic pressure due to the extreme energy needed to sustain the current density, consistent with kinetic simulations. This causes the upstream magnetic field lines to collapse in, producing the open outflow geometry which enables fast reconnection. The result is important for understanding a wide range of extreme astrophysical environments, where fast reconnection has been evoked to explain observations such as transient flares and nonthermal particle signatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Imaging pion showers with the CALICE analogue hadron calorimeter

The CALICE collaboration investigates different technology options for highly granular calorimeters for detectors at a future electron-positron collider. One of the devices constructed and tested by the collaboration is a 1 m{sup 3} prototype for an imaging scintillator-steel sampling calorimeter for hadrons with analogue readout (AHCAL). The light from 7608 small scintillator cells is detected with silicon photomultipliers. The AHCAL has been successfully operated during electron and hadron test-beam measurements at DESY, CERN, and Fermilab since 2005. The collected data allow for evaluating the novel technologies employed. In addition, these data provide a valuable basis for validating pion cascade simulations. This paper presents the current status of comparisons between the AHCAL data and predictions from different Monte Carlo models implemented in GEANT4. The comparisons cover the total visible energy, longitudinal and radial shower profiles, and the shower substructure. Furthermore, this paper discusses a software compensation algorithm for improving the energy resolution of the AHCAL for single pions. (authors)

43 PARTICLE ACCELERATORS↗

A Novel Three-Phase Oak Ridge AC / AC Converter for Wireless Mobility Energy Storage System (WMESS) Connectivity

In this study, a novel three-phase Oak Ridge ac to ac converter is introduced for wireless mobility energy storage system (WMESS) applications for grid support or ancillary service applications. The proposed topology can be used in bidirectional operation between ac grid and ac terminals of energy storage (output of the ESS inverter) by accomplishing unity power factor. Inherent merit of the technology is that it can directly merge ac input 60 Hz grid frequency with the high frequency by superimposing them with the Oak Ridge Converter (ORC) and through the wireless coils. Theoretical and simulation results are provided for 10 kW output power. The functionality of the proposed three-phase system is demonstrated with the coupling coils separated by 6 inches of air gap with the input / output of 277 V AC,RMS . The system overall design is presented, and simulation results demonstrate achieving 3% current total harmonic distortion (THD) and 0.99 power factor (PF) at full load of 10 kW wireless power transfer.

Asa, Erdem↗

Optimizing Asynchronous Multi-Level Checkpoint/Restart Configurations with Machine Learning

With the emergence of versatile storage systems, multi-level checkpointing (MLC) has become a common approach to gain efficiency. However, multi-level checkpoint/restart can cause enormous I/O traffic on HPC systems. To use multilevel checkpointing efficiently, it is important to optimize check-point/restart configurations. Current approaches, namely modeling and simulation, are either inaccurate or slow in determining the optimal configuration for a large scale system. In this paper, we show that machine learning models can be used in combination with accurate simulation to determine the optimal checkpoint configurations. We also demonstrate that more advanced techniques such as neural networks can further improve the performance in optimizing checkpoint configurations.

checkpoint-restart↗

Evaluation of the dosimetric impact of interfractional anatomical variations on prostate proton therapy using daily in-room CT images

Purpose: To quantify interfractional anatomical variations and their dosimetric impact during the course of fractionated proton therapy (PT) of prostate cancer and to assess the robustness of the current treatment planning techniques. Methods: Simulation and daily in-room CT scans from ten prostate carcinoma patients were analyzed. PT treatment plans (78 Gy in 39 fractions of 2 Gy) were created on the simulation CT, delivering 25 fractions to PTV1 (expanded from prostate and seminal vesicles), followed by 14 boost fractions to PTV2 (expanded from prostate). Plans were subsequently applied to daily CT, with beams aligned to the prostate center in the sagittal plane. For five patients having a sufficiently large daily imaging volume, structure contours were manually drawn, and plans were evaluated for all CT sets. For the other five patients, the plans were evaluated for six selected fractions. The daily CT was matched to the simulation CT through deformable registration. The registration accuracy was validated for each fraction, and the three patients with a large number of accurately registered fractions were used for dose accumulation. Results: In individual fractions, the coverage of the prostate, seminal vesicles, and PTV1 was generally maintained at the corresponding prescription dose. For PTV2, the volume covered by the fractional prescription dose of 2 Gy (i.e., V2) was, on average, reduced by less than 3% compared to the simulation plan. Among the 225 (39 x 5 + 6 x 5) fractions examined, 15 showed a V2 reduction larger than 5%, of which ten were caused by a large variation in rectal gas, and five were due to a prostate shift in the craniocaudal direction. The fractional dose to the anterior rectal wall was found to increase for one patient who had large rectal gas volume in 25 of the 39 fractions, and another who experienced significant prostate volume reduction during the treatment. The fractional bladder dose generally increased with decreasing fullness. In the total accumulated dose for the three patients after excluding a few fractions with inaccurate registration due to a large amount of rectal gas (a condition inconsistent with RTOG protocol), 98.5%, 96.6%, and 98.2% of the PTV2 received the prescription dose of 78 Gy. The V75 and V70 of the anterior rectal wall and bladder both remained within tolerance. Conclusions: The results confirm that the PT planning techniques and dose constraints used at our institution ensure that target coverage to the prescription dose is maintained in the presence of interfractional anatomical variations. Dose coverage in individual fractions can be compromised, and normal tissue dose increased, due to deviations in the bladder and rectal volume compared to the simulation plans or progressive changes in the prostate volume during the treatment. Deviations from the plan can be reduced with efforts aimed at maintaining consistent daily patient anatomy.

61 RADIATION PROTECTION AND DOSIMETRY↗

Room-temperature skyrmion lattice in a layered magnet (Fe 0.5 Co 0.5 ) 5 GeTe 2

Novel magnetic ground states have been stabilized in two-dimensional (2D) magnets such as skyrmions, with the potential next-generation information technology. Here, we report the experimental observation of a Néel-type skyrmion lattice at room temperature in a single-phase, layered 2D magnet, specifically a 50% Co-doped Fe 5 GeTe 2 (FCGT) system. The thickness-dependent magnetic domain size follows Kittel's law. The static spin textures and spin dynamics in FCGT nanoflakes were studied by Lorentz electron microscopy, variable-temperature magnetic force microscopy, micromagnetic simulations, and magnetotransport measurements. Current-induced skyrmion lattice motion was observed at room temperature, with a threshold current density, j th = 1 × 10 6 A/cm 2 . This discovery of a skyrmion lattice at room temperature in a noncentrosymmetric material opens the way for layered device applications and provides an ideal platform for studies of topological and quantum effects in 2D.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the radiation resistance of planar Gunn diodes with δ-doped layers

The radiation resistance of planar Gunn diodes is investigated. Based on the results of measurements of the pulsed current–voltage characteristics and computer simulations it is shown that the use of δ layers of doping impurities contributes to the higher radiation resistance of planar diodes by an order of magnitude compared to conventional Gunn diodes. The results of this study make it possible to formulate methodical guidelines to reduce the amount of computational and experimental studies without a considerable decrease in their informativity.

36 MATERIALS SCIENCE↗

The in-silico lab-on-a-chip: petascale and high-throughput simulations of microfluidics at cell resolution

We present simulations of blood and cancer cell separation in complex microfluidic channels with subcellular resolution, demonstrating unprecedented time to solution, performing at 65.5% of the available 39.4 PetaInstructions/s in the 18, 688 nodes of the Titan supercomputer. These simulations outperform by one to three orders of magnitude the current state of the art in terms of numbers of simulated cells and computational elements. The computational setup emulates the conditions and the geometric complexity of microfluidic experiments and our results reproduce the experimental findings. These simulations provide sub-micron resolution while accessing time scales relevant to engineering designs. We demonstrate an improvement of up to 45X over competing state-of-the-art solvers, thus establishing the frontiers of simulations by particle based methods. Our simulations redefine the role of computational science for the development of microfluidics –- a technology that is becoming as important to medicine as integrated circuits have been to computers.

Computer Science↗

The Critical Stack Pressure to Alter Void Generation at Li/Solid-Electrolyte Interfaces during Stripping

The lithium stripping process generates vacancies, which may accumulate as voids and lead to uneven current distribution and dendrite growth in the following plating cycles. A stack pressure is typically required during stripping, but how to optimize the stack pressure is not clear. In this work, extremely lithiophilic Li/Li 2 O and lithiophobic Li/LiF interfaces were used to reveal the combining effect of interface interaction and stack pressure induced lithium creep on the stripping critical current density (CCD). A multiscale simulation scheme with Density Functional Theory (DFT), kinetic Monte Carlo (KMC) simulations, and an analytical model was developed. The analytical model predicted lithiophobic interfaces require a higher stack pressure than lithiophilic interfaces to reach the same CCD. The KMC simulations also showed higher stack pressure is needed at lithiophobic interfaces to accelerate Li vacancy diffusion into the bulk and maintain a flat surface. This stack pressure needs to be high enough to alter the Li forward-and-backward hopping barriers at the interface. This multiscale simulation scheme illustrates the importance to include the chemical-mechanical effects during Li stripping morphology evolution. It can be used to design ideal interlayer coating materials to maintain a flat Li surface during cycling.

25 ENERGY STORAGE↗

Analysis of near-field and far-field aerosol dispersion for microreactors

The current paper presents a simulation-based analysis of aerosol dispersion in the near-field and far-field of a generic, conceptual microreactor operating at pressures close to the ambient pressure; therefore, in the event of an accident that causes radionuclide leakage from the microreactor containment, the radionuclide particles are less likely to travel too far from the reactor, as opposed to conventional reactors. Accordingly, the presented work provides estimates of average and 95-percentile values of the relative effluent concentration. A parametric study is then performed to narrow down the parameters which affect the aerosol dispersion characteristics most significantly. Simulations were performed in the computer code ARCON96, and the parameters found to affect aerosol dispersion characteristics are the atmospheric stability class, and the distance between the release point and the receptor. It is recommended that the computer code RADTRAD be used to calculate actual dosage over distance, using the outputs from ARCON96 as inputs, along with reactor-specific core term inventories. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Beam-Dynamics Analysis of Long-Range Wakefield Effects on the SCRF Cavities at the Fast Facility

Long-range wakefields in superconducting RF (SCRF) cavities create complicated effects on beam dynamics in SCRF-based FEL beamlines. The driving bunch excites effectively an infinite number of structure modes (including HOMs) which oscillate within the SCRF cavity. Couplers with loads are used to damp the HOMs. However, these HOMs can persist for long periods of time in superconducting structures, which leads to long-range wakefields. Clear understanding of the long-range wakefield effects is a critical element for risk mitigation of future SCRF accelerators such as XFEL at DESY, LCLS-II XFEL, and MaRIE XFEL. We are currently developing numerical tools for simulating long-range wakefields in SCRF accelerators and plan to experimentally verify the tools by measuring these wakefields at the Fermilab Accelerator Science and Technology (FAST) facility. This paper previews the experimental conditions at the FAST 50 MeV beamline based on the simulation results.

43 PARTICLE ACCELERATORS↗

Thin Internal Target Studies in a Compact FFAG

The production of radioisotopes using a thin internal target and recycled beam within a compact FFAG design has been studied. Radioisotopes have a wide range of uses in medicine, and recent disruption to the supply chain has seen a renewed effort to find alternative isotopes and production methods. The FFAG design features separate sector magnets with non-scaling, non-linear field gradients which are optimized with magnet geometry to achieve isochronisity at the level of 0.3%, sufficient for Continuous Wave (CW) operation. Simulations have demonstrated that beam currents of up to 10mA can comfortably be achieved with this design. To further improve production efficiency a thin internal target, where the beam passes through the target and is recirculated, may be used. This setup ensures that production takes place within a narrow energy range, potentially increasing production rates and reducing impurities.

43 PARTICLE ACCELERATORS↗

Curation of Ground-Truth Validated Benchmarking Datasets for Fault Detection & Diagnostics Tools

Fault detection and diagnostics (FDD) analytical tools for heating, ventilation and air conditioning (HVAC) systems represent one of the most active areas of smart building technology development. A diversity of techniques is used for FDD analytics, spanning physical models, black box, and rule-based approaches, and researchers continuously strive to develop improved algorithms. With FDD algorithm numbers now in the hundreds, there is a need for performance evaluation of these algorithms in order to assess improvements, improve costeffectiveness, and to prioritize investment in the further development of these technologies. A persistent challenge of FDD advance has been the lack of common datasets to benchmark the performance accuracy of FDD algorithms. This paper summarizes the successful curation of HVAC operational data, paired with validated ground-truth information regarding the presence and absence of faults. The current dataset, consisting of both simulation and experimental data, will evolve to include a larger set of HVAC systems with the objective of creating the largest publicly available dataset to be used by FDD developers, users, and researchers to compare and contrast performance accuracy across FDD algorithms, helping to drive improvements that will spur greater market adoption of FDD tools. Furthermore, in order to avoid previously observed issues with contributed datasets and ensure high quality and consistency of future submissions, the development of data validation and ground-truth assessment protocol is detailed in this study.

Casillas, Armando↗

Cabana: A Performance Portable Library for Particle-Based Simulations

Particle-based simulations are ubiquitous throughout many fields of computational science and engineering, spanning the atomistic level with molecular dynamics (MD), to mesoscale particle-in-cell (PIC) simulations for solid mechanics, device-scale modeling with PIC methods for plasma physics, and massive N-body cosmology simulations of galaxy structures, with many other methods in between (Hockney & Eastwood, 1989). While these methods use particles to represent significantly different entities with completely different physical models, many low-level details are shared including performant algorithms for short- and/or long-range particle interactions, multi-node particle communication patterns, and other data management tasks such as particle sorting and neighbor list construction. Cabana is a performance portable library for particle-based simulations, developed as part of the Co-Design Center for Particle Applications (CoPA) within the Exascale Computing Project (ECP) (Alexander et al., 2020). The CoPA project and its full development scope, including ECP partner applications, algorithm development, and similar software libraries for quantum MD, is described in (Mniszewski et al., 2021). Cabana uses the Kokkos library for on-node parallelism (Edwards et al., 2014; Trott et al., 2022), enabling simulation on multi-core CPU and GPU architectures, and MPI for GPU-aware, multi-node communication. Cabana provides particle simulation capabilities on almost all current Kokkos backends, including serial execution, OpenMP (including OpenMP-Target for GPUs), CUDA (NVIDIA GPUs), HIP (AMD GPUs), and SYCL (Intel GPUs), providing a clear path for the coming generation of accelerator-based exascale hardware. Cabana builds on Kokkos by providing new particle data structures and particle algorithms resulting in a similar execution policy-based, node-level programming model that is intended to be used in addition to the core Kokkos library within an application. Cabana is designed as an application and physics agnostic, but particle-specific toolkit which can either be used to generate a new application, or to be used as needed in existing applications at various levels of invasiveness including through interfaces that wrap user memory in existing data structures.

97 MATHEMATICS AND COMPUTING↗

WO 3 /TiO 2 Nanotube Photoanodes for Solar Water Splitting with Simultaneous Wastewater Treatment

Nanostructured WO 3 /TiO 2 nanotubes with properties that enhance solar photoconversion reactions were developed, characterized and tested. The TiO 2 nanotubes were prepared by anodization of Ti foil, and WO 3 was electrodeposited on top of the nanotubes. SEM images show that these materials have the same ordered structure as TiO 2 nanotubes, with an external nanostructured WO 3 layer. Diffuse reflectance spectra showed an increase in the visible absorption relative to bare TiO 2 nanotubes, and in the UV absorption relative to bare WO 3 films. Incident simulated solar photon-to-current efficiency increased from 30% (for bare WO 3 ) to 50% (for WO 3 /TiO 2 composites). With the addition of diverse organic pollutants, the photocurrent densities exhibited more than a 5-fold increase. Chemical oxygen demand measurements showed the simultaneous photodegradation of organic pollutants. The results of this work indicate that the unique structure and composition of these composite materials enhance the charge carrier transport and optical properties compared with the parent materials.

Reyes, Karla Rosa↗

Ceramic Waste Form Data Package

The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600°C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700°C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600°C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗