Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

The spectrum and properties of the scattering cross section of electrons in open spherical quantum dots

In the effective mass approximation in the model of rectangular potentials, the scattering cross section of electrons in an open spherical quantum dot is calculated for the first time. It is shown that, for such a nanosystem with a barrier of several monolayers, the experimental measurements of the scattering cross section allow adequate identification of the resonance energies and the widths of resonance states in the low-energy region of the quasi-stationary electron spectrum. It is also shown that, for an open spherical quantum dot with a low-strength potential barrier, the adequate spectral parameters of the quasi-stationary spectrum are the generalized resonance energies and widths determined via the probability of an electron being inside the quantum dot.

36 MATERIALS SCIENCE↗

Layer-by-Layer Analysis of the Thickness Distribution of Silicon Dioxide in the Structure SiO{sub 2}/Si(111) by Inelastic Electron Scattering Cross-Section Spectroscopy

The SiO{sub 2}-concentration profile in the structure SiO{sub 2}/Si(111) is determined from experimental spectra of the cross section for the inelastic scattering of reflected electrons in the primary electron energy range from 300 to 3000 eV. The spectra are analyzed with the use of a proposed algorithm and developed computer program for simulating the spectra of the cross section for the inelastic scattering of reflected electrons for layered structures with an arbitrary number of layers, arbitrary thickness, and variable concentration of components in each layer. The best agreement between the calculated and experimental spectra is attained by varying the silicon dioxide and silicon concentrations in each layer. The results obtained can be used for profiling film-substrate structures with an arbitrary composition.

36 MATERIALS SCIENCE↗

Study of the structures of cleaved cross sections by Raman spectroscopy

Scanning confocal Raman spectroscopy is used to study the crystal structure of GaAs irradiated with Mn{sup +} ions with subsequent pulse laser annealing. The scanning of cleaved cross sections of samples shows that the structure completely recovers over the depth of implantation after the annealing. Scattering in the coupled phonon–plasmon mode is revealed, which is indicative of electrical activation of the impurity at Mn doses above 1 × 10{sup 16} cm{sup –2}. The study shows the possibilities of using scanning confocal Raman spectroscopy in investigations of cleaved cross sections of structures. Using a test structure with a single δ-doped C layer, we show that the lateral resolution of the technique is 300 nm.

36 MATERIALS SCIENCE↗

DIFFERENTIAL CROSS SECTION ANALYSIS IN KAON PHOTOPRODUCTION USING ASSOCIATED LEGENDRE POLYNOMIALS

Angular distributions of differential cross sections from the latest CLAS data sets,6 for the reaction γ + p→K+ + Λ have been analyzed using associated Legendre polynomials. This analysis is based upon theoretical calculations in Ref. 1 where all sixteen observables in kaon photoproduction can be classified into four Legendre classes. Each observable can be described by an expansion of associated Legendre polynomial functions. One of the questions to be addressed is how many associated Legendre polynomials are required to describe the data. In this preliminary analysis, we used data models with different numbers of associated Legendre polynomials. We then compared these models by calculating posterior probabilities of the models. We found that the CLAS data set needs no more than four associated Legendre polynomials to describe the differential cross section data. In addition, we also show the extracted coefficients of the best model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the t$\bar{t}$ cross section at the Run II Tevatron using Support Vector Machines

This dissertation measures the t$\bar{t}$ production cross section at the Run II CDF detector using data from early 2001 through March 2007. The Tevatron at Fermilab is a p$\bar{p}$ collider with center of mass energy √s = 1.96 TeV. This data composes a sample with a time-integrated luminosity measured at 2.2 ± 0.1 fb -1 . A system of learning machines is developed to recognize t$\bar{t}$ events in the 'lepton plus jets' decay channel. Support Vector Machines are described, and their ability to cope with a multi-class discrimination problem is provided. The t$\bar{t}$ production cross section is then measured in this framework, and found to be σ t$\bar{t}$ = 7.14 ± 0.25 (stat) -0.86 +0.61 (sys) pb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of WW + WZ production cross section and study of the dijet mass spectrum in the ℓν + jets final state at CDF

We present the measurement of the WW and WZ production cross section in p$\bar{p}$ collisions at √s = 1.96 TeV, in a final state consisting of an electron or muon, neutrino and jets. The data analyzed were collected by the CDF II detector at the Tevatron collider and correspond to 4.3 fb -1 of integrated luminosity. The analysis uses a fit to the dijet mass distribution to extract the diboson contribution. We observe 1582 ± 275(stat.) ± 107(syst.) diboson candidate events and measure a cross section of σ WW/WZ = 18.1 ± 3.3(stat.) ± 2.5(syst.) pb, consistent with the Standard Model prediction of 15.9 ± 0.9 pb. The best fit to the dijet mass of the known components shows a good agreement with the data except for the [120, 160] GeV/c 2 mass range, where an excess is observed. We perform detailed checks of our background model and study the significance of the excess, assuming an additional gaussian component with a width compatible with the expected dijet mass resolution. A standard Δ χ 2 test of the presence of the additional component, returns a p-value of 4.2 x 10 -4 when standard sources of systematics are considered, corresponding to a significance of 3.3{sigma}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron cross section covariances in the resonance region: 52Cr, 56Fe, 58Ni

We evaluated covariances for neutron capture and elastic scattering cross sections on major structural materials, {sup 52}Cr, {sup 56}Fe and {sup 58}Ni, in the resonance region which extends beyond 800 keV for each of them. Use was made of the recently developed covariance formalism based on kernel approximation along with data in the Atlas of Neutron Resonances. The data of most interest for AFCI applications, elastic scattering cross section uncertainties at energies above about few hundred keV, are on the level of about 12% for {sup 52}Cr, 7-8% for {sup 56}Fe and 5-6% for {sup 58}Ni.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron Cross section Covariances in the Resonance region: 50,53Cr, 54,57Fe and 60Ni

We evaluated covariances in the neutron resonance region for capture and elastic scattering cross sections on minor structural materials, {sup 50,53}Cr, {sup 54,57}Fe and {sup 60}Ni. Use was made of the recently developed covariance formalism based on kernel approximation along with data in the Atlas of Neutron Resonances. Our results of most interest for advanced fuel cycle applications, elastic scattering cross section uncertainties at energies around 100 keV, are on the level of about 7-10%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the ν μ Charged Current π + to Quasi-Elastic Cross Section Ratio on Mineral Oil in a 0.8 GeV Neutrino Beam

Charged current single pion production (CCπ + ) and charged current quasi-elastic scattering (CCQE) are the most abundant interaction types for neutrinos at energies around 1 GeV, a region of great interest to oscillation experiments. The cross-sections for these processes, however, are not well understood in this energy range. This dissertation presents a measurement of the ratio of CCπ + to CCQE cross-sections for muon neutrinos on mineral oil (CH 2 ) in the MiniBooNE experiment. The measurement is presented here both with and without corrections for hadronic re-interactions in the target nucleus and is given as a function of neutrino energy in the range 0.4 GeV < E ν < 2.4 GeV. With more than 46,000 CCπ + events collected in MiniBooNE, and with a fractional uncertainty of roughly 11% in the region of highest statistics, this measurement represents a dramatic improvement in statistics and precision over previous CCπ + and CCQE measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A simultaneous measurement of the $b$-tagging efficiency scale factor and the $t\bar{t}$ Production Cross Section at the Collider Detector at Fermilab

The ability to compare results between Monte Carlo and data is imperative in modern experimental high-energy physics analyses. The b-tagging efficiency Scale Factor (SF) allows for an accurate comparison of b quark identification in data samples and Monte Carlo. This thesis presents a simultaneous measurement of the SF for the SecVtx algorithm and the t{bar t} production cross section using 5.6 fb{sup -1} of p{bar p} collision data at {radical}s = 1.96 TeV collected by the Collider Detector at Fermilab (CDF) experiment. The t{bar t} cross section was measured to be 7.26 {+-} 0.47 pb, consistent with prior CDF analyses. The tight SF value was measured to be 0.925 {+-} 0.032 and the loose SF value was measured at 0.967 {+-} 0.033. These are the most precise SF SecVtx measurements to be performed at CDF to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Report on 241,242Am(n,x) surrogate cross section measurement

The main goal of this measurement is to determine the {sup 242}Am(n,f) and {sup 241}Am(n,f) cross sections via the surrogate {sup 243}Am. Gamma-ray data was also collected for the purpose of measuring the (n,2n) cross-sections. The experiment was conducted using the STARS/LIBERACE experimental facility located at the 88 Inch Cyclotron at Lawrence Berkeley National Laboratory the first week of February 2011. A description of the experiment and status of the data analysis follow.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

$p/bar{p}$ Cross Sections for the Tevatron Energy Scan

The Tevatron energy scan will present unique operational challenges for the CDF detector as a whole and the CLC luminosity detector in particular. The primary concern for CLC operations is the energy dependence of the p{bar p} cross section. In this note, values for the hadronic p{bar p} cross section at the center-of-mass energies to be visited during the scan are tabulated.

43 PARTICLE ACCELERATORS↗

Report on 240 Am(n,x) surrogate cross section test measurement

The main goal of the test measurement was to determine the feasibility of the 243 Am(p,t) reaction as a surrogate for 240 Am(n,f). No data cross section data exists for neutron induced reactions on 240 Am; the half-life of this isotope is only 2.1 days making direct measurements difficult, if not impossible. The 48-hour experiment was conducted using the STARS/LIBERACE experimental facility located at the 88 Inch Cyclotron at Lawrence Berkeley National Laboratory in August 2011. A description of the experiment and results is given. The beam energy was initially chosen to be 39 MeV in order to measure an equivalent neutron energy range from 0 to 20 MeV. However, the proton beam was not stopped in the farady cup and the beam was deposited in the surrounding shielding material. The shielding material was not conductive, and a beam current, needed for proper tuning of the beam as well as experimental monitoring, could not be read. If the 240 Am(n,f) surrogate experiment is to be run at LBNL, simple modifications to the beam collection site will need to be made. The beam energy was reduced to 29 MeV, which was within an energy regime of prior experiments and tuning conditions at STARS/LIBERACE. At this energy, the beam current was successfully tuned and measured. At 29 MeV, data was collected with both the 243 Am and 238 U targets. An example particle identification plot is shown in Fig. 1. The triton-fission coincidence rate for the 243 Am target and 238 U target were measured. Coincidence rates of 0.0233(1) cps and 0.150(6) cps were observed for the 243 Am and 238 U targets, respectively. The difference in count rate is largely attributed to the available target material - the 238 U target contains approximately 7 times more atoms than the 243 Am. A proton beam current of ~0.7 nA was used for measurements on both targets. Assuming a full experimental run under similar conditions, an estimate for the run time needed was made. Figure 2 shows the number of days needed as a function of acceptable uncertainty for a measurement of 1-20 MeV equivalent neutron energy, binned into 200 keV increments. A 5% measurement will take 3 days for U, but 20 days for Am. It may be difficult to be the sole user of the LBNL cyclotron, or another facility, for such an extended period. However, a 10% measurement will take 19 hours for U, and 5 days for Am. Such a run period is more reasonable and will allow for the first ever measurement of the 240 Am(n,f) cross section. We also anticipate 40% more beam time being available at Texas A&M Cyclotron Institute compared to LBNL in FY2012. The increased amount of beam time will allow us to accumulate better statistics then what would have been available at LBNL.

43 PARTICLE ACCELERATORS↗

Mesure de la section efficace de production de paires de quarks top dans le canal μ + jets + τ + b-jet(s) + Energie transverse manquante auprès de l'expérience DØ du Tevatron

The purpose of high energy physics is to improve our knowledge about the fundamental structure of matter, in particular about particles that constitute the world. One of these is the top quark, that was discovered in 1995 by the CDF and D0 collaborations at the Tevatron protons-antiprotons collider. One of the primary aim of the Tevatron has been then the fine study of the top quark properties, in particular the top-antitop production cross section. Different analysis have been performed in the leptons (μ,e,τ) + jets, dileptons, and all hadronic channels to determine accurately the values of these parameters, and thus to test the validity of the Standard Model. The main goal of this thesis is to verify one of the theoretical predictions of the Standard Model of particle physics, the top-antitop production cross section, at the Tevatron collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron Induced Nuclear Reaction Cross Sections for Radiochemistry in the Region of Thallium, Lead, and Bismuth

We have developed a set of modeled nuclear reaction cross sections for use in radiochemical detector diagnostics. Systematics for the input parameters required by the Hauser-Feshbach statistical model developed in the TALYS code system are used to calculate neutron induced nuclear reaction cross sections for targets ranging from Thallium (Z = 81) to Bismuth (Z = 83).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Low-fidelity covariances for neutron cross sections on 57 structural and 31 heavy nuclei in the fast region

We produced a large set of neutron cross section covariances in the energy range of 5 keV-20 MeV. The present set of data on 57 structural materials and 31 heavy nuclei follows our earlier work on 219 fission product materials and completes our extensive contribution to the low-fidelity covariance project (307 materials). This project aims to provide initial, low-fidelity yet consistent estimates of covariance data for nuclear criticality safety applications. The evaluation methodology combines the nuclear reaction model code EMPIRE which calculates sensitivity to nuclear reaction model parameters, and the Bayesian code KALMAN that propagates uncertainties of the model parameters to cross sections. Taking into account the large scale of the project, only marginal reference to experimental data was made. The covariances were derived from the perturbation of several key model parameters selected by the sensitivity analysis. These parameters refer to the optical model potential, the level densities and the strength of the pre-equilibrium emission. This work represents the first attempt ever to generate nuclear data covariances on such a large scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Top quark pair production cross section in the lepton+jets channel using b-tagging at D0

The top quark pair production cross section measurement in the lepton+jets channel with b-tagging algorithm is described. About 900 pb -1 data collected by the D0 detector at the Fermilab Tevatron are used for this analysis. In this thesis, event selection, background estimation, and cross section calculation are discussed in detail. In addition, calibration of the Luminosity Monitor readout electronics and a new b-tagging algorithm, the SLTNN tagger, are also discussed in this thesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗