Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radically”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

An Experimental and Numerical Investigation to Characterize the Low-Temperature Heat Release in Stoichiometric and Lean Combustion

This work reports on an experimental and modeling study on the low-temperature heat release (LTHR) characteristics for three RON 90 binary blends (n-heptane blended with isooctane, toluene and ethanol) in a Cooperative Fuel Research (CFR) engine at lean and stoichiometric conditions that are representative of homogeneous charge compression ignition (HCCI) and spark-ignition (SI) end-gas combustion conditions, respectively. An analysis of the end-gas temperature-pressure (T-P) trajectories was performed to identify the intake conditions leading to similar T-P trajectories between the two lambdas for each fuel blend. A heat release analysis was then conducted for the identified cases, where fuel-to-fuel differences in LTHR were identified and found to be sensitive to the operating condition. Simulations were conducted for these cases using a recently updated chemical kinetic model and a 0-D engine model, where good qualitative and reasonable quantitative agreements in LTHR were obtained. Sensitivity analysis was also performed directly on the rates of LTHR, to understand the controlling chemical reactions of LTHR, providing further insights into the fuel-to-fuel differences. The results demonstrate the significant promoting effect of n-heptane on LTHR rates, while inhibiting effects were seen for ethanol and toluene. Also highlighted was the importance of H atom abstraction reactions from the chemistry of each fuel component, which could lead to contradictory fuel behavior depending on the locations of the H site of the abstraction reaction due to the different ensuing pathways for the primary fuel radicals.

LTHR, RON 90 binary blends, sensitivity analysis↗
DOE OSTI2021

Probing the antiknock effect of anisole through an ignition, speciation and modeling study of its blends with isooctane

In order to unravel the reaction pathways relevant to anisole co-oxidation within a fuel blend, a detailed study of isooctane/anisole blends was performed with the ULille RCM. Ignition delays as well as mole fraction profiles were measured during a two-stage ignition delay using sampling and GC techniques. These results are used to validate a kinetic model developed from ab initio calculations for the most relevant rate constants which included H-atom abstraction reactions from anisole, and reactions on the potential energy surfaces of methoxyphenyl + O 2 and anisyl + O 2 . Pressure dependent rate constants were computed for the methoxyphenyl + O 2 and anisyl + O 2 reactive systems using master equation code analysis. The new kinetic model shows good agreement with the experimental data. Dual brute-force sensitivity analysis was performed, on both first- and second-stages of ignition, allowing the identification of the most important reactions in the prediction of both ignition delays. It was observed that while pure anisole does not show NTC behavior, a 60/40 isooctane/anisole blend displays such behavior, as well as two-stage ignition. This suggests anisole addition may not be as beneficial to knock resistance as expected from its high octane number. The kinetic modeling results demonstrate the importance of H-abstraction reactions both from the methoxy group and from the aryl ring in ortho-position and the addition of the resultant radicals to O2, mostly leading to the formation of polar or non-aromatic products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effects of isoalcohol blending with gasoline on autoignition behavior in a rapid compression machine: Isopropanol and isobutanol

Alcohols, and particularly isoalcohols, are potentially advantageous blendstocks towards achieving efficient, low-carbon intensity internal combustion engines. Their use in advanced configurations, such as boosted spark-ignition or spark-assisted compression ignition, requires a comprehensive understanding of their blending effects on the low- and intermediate-temperature autoignition behavior of petroleum-derived gasoline. This work reports an experimental and modeling study of such autoignition characteristics quantified in a twin-piston rapid compression machine. Isopropanol and isobutanol are blended into a research-grade gasoline (FACE-F) at oxygenate blend levels of 0 to 30% vol/vol, with tests conducted at pressures of 20 and 40 bar, temperatures from 700 to 1000 K, and dilute stoichiometric fuel loadings. Changes to overall reactivity, including first-stage and main ignition times, and preliminary exothermicity are established, with comparisons made to previous measurements with ethanol-blended FACE-F gasoline. Furthermore, it is found that at low-temperature/NTC conditions (700–860 K) the isoalcohols suppress first-stage reactivity and associated heat release while main ignition times are extended. At NTC/intermediate-temperature (860–1000 K) conditions changes to fuel reactivity are less significant with isopropanol slightly suppressing reactivity and isobutanol promoting ignition. Detailed chemical kinetic modeling is used to interpret the experimental measurements. Overall trends of suppression or promotion in the blending behavior are reasonably captured by the model. Sensitivity and rate of production analyses indicate that at lower temperatures H-atom abstraction reactions from the surrogate fuel molecules (e.g., cyclopentane, isooctane) and the isoalcohols via OH are important leading to TC 3 H 6 OH and IC 4 H 8 OH–C radicals, for isopropanol and isobutanol respectively, which act as scavengers in the system. At higher temperatures, similar chemistries are dominant, but there is an increasing importance of abstraction by HO 2 . The kinetic modeling also indicates that the promoting effect of isobutanol at higher temperatures is due to the increased abstractions at the γ-sites, while at lower temperatures abstraction at the α-site leads to greater reactivity suppression.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of inter-pulse coupling on nanosecond pulsed high frequency discharge ignition in a flowing mixture

This work numerically investigates the effects of non-equilibrium nanosecond plasma discharge pulse rep- etition frequency, pulse number, and flow velocity on the critical ignition volume, minimum ignition energy, and chemistry in a plasma-assisted H 2 /air flow at 300 K and 1 atm using a multi-scale adaptive reduced chemistry solver for plasma assisted combustion (MARCS-PAC). The interactions between discharges/ignition kernels spanning decoupled, partially-coupled and fully-coupled regimes in a pulse train are studied. For a single pulse discharge, increased flow velocity increases the minimum ignition energy required due to the increase of convective heat loss and flame stretch. The results show that the minimum ignition kernel prop- agation speed at the critical ignition kernel volume increases with the flow velocity. The minimum critical ignition volume decreases with the increase of plasma discharge energy. For sequential two-pulse discharges, ignition fails at both decoupled and partially-coupled regimes even when the total discharge energy is above the minimum ignition energy, but succeeds only in the fully-coupled regime at a shorter inter-pulse time. Overlap of the OH radical pool between the sequential two-pulse discharges and the increase of the chemistry effect due to the increase of reduced electric field in the fully-coupled regime contribute to the ignition enhancement. In addition, for two-pulse discharges in the fully-coupled discharge regime, the mixture can be ignited at a total energy below the minimum ignition energy of a single pulse with the same flow conditions. Moreover, for a given total discharge energy with multiple pulsed discharges, the enhancement of the ignition kernel volume has a non-monotonic dependence on discharge frequency and pulse number. The effective ignition enhancement can be achieved with an optimal pulse repetition frequency and pulse number. Furthermore, this work provides a new understanding of the mechanism for repetitive plasma ignition and insights for the optimization of plasma ignition in a reactive flow.

42 ENGINEERING↗
DOE OSTI2022

Methanol oxidation up to 100 atm in a supercritical pressure jet-stirred reactor

Methanol (CH 3 OH) has attracted considerable attention as a renewable fuel or fuel additive with low greenhouse gas emissions. Methanol oxidation was studied using a recently developed supercritical pressure jet-stirred reactor (SP-JSR) at pressures of 10 and 100 atm, at temperatures from 550 to 950 K, and at equivalence ratios of 0.1, 1.0, and 9.0 in experiments and simulations. Here, the experimental results show that the onset temperature of CH 3 OH oxidation at 100 atm is around 700 K, which is more than 100 K lower than the onset at 10 atm and this trend cannot be predicted by the existing kinetics models. Furthermore, a negative temperature coefficient (NTC) behavior was clearly observed at 100 atm at fuel rich conditions for methanol for the first time. To understand the observed temperature shift in the reactivity and the NTC effect, we updated some key elementary reaction rates of relevance to high pressure CH 3 OH oxidation from the literature and added some new low-temperature reaction pathways such as CH 2 O + HO 2 = HOCH 2 O 2 (RO 2 ), RO 2 + RO 2 = HOCH 2 O (RO) + HOCH 2 O (RO) + O 2 , and CH 3 OH + RO 2 = CH 2 OH + HOCH 2 O 2 H (ROOH). Although the model with these updates improves the prediction somewhat for the experimental data at 100 atm and reproduces well high-temperature ignition delay times and laminar flame speed data in the literature, discrepancies still exist for some aspects of the 100 atm low-temperature oxidation data. In addition, it was found that the pressure-dependent HO 2 chemistry shifts to lower temperature as the pressure increases such that the NTC effect at fuel-lean conditions is suppressed. Therefore, as shown in the experiments, the NTC phenomenon was only observed at the fuel-rich condition where fuel radicals are abundant and the HO 2 chemistry at high pressure is weakened by the lack of oxygen resulting in comparatively little HO 2 formation.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

The influence of thermochemistry on the reactivity of propane, the pentane isomers and $n$-heptane in the low temperature regime

In this study, the influence of thermochemistry on the reactivity of fuels at low temperatures (600–1000 K) is studied here. Specifically, the effect of different sets of thermochemistry on chemical model predictions is explored, where various sets are calculated at different levels of theory in addition to recently updated group additivity values. Experimentally measured ignition delay times for propane, the pentane isomers and n-heptane are simulated using NUIGMech1.2 and replacing the thermochemistry of the low-temperature species with the calculated values. For propane, three different thermochemistry sets were calculated, namely CCSD(T)-F12/TZ-F12//B2PLYP-D3/TZ//B2PLYP-D3/TZ (QM1), CCSD(T)-F12/TZ-F12//B2PLYP-D3/TZ//ωB97X-D/TZ (QM2) and B2PLYP-D3/TZ/ωB97X-D/6-31G*//ωB97X-D/6-31G* (QM3). The QM2 results provide parameters to optimize new group additivity (NGA) values which are used to calculate the fourth set of thermochemistry. The model predictions using these four sets are compared to those using NUIGMech1.2 for propane. As the QM1 and QM2 calculations are expensive, the thermochemistry calculated from the QM3 and NGA calculations are used in the pentane isomer and n-heptane models. For all of the models, it is found that the thermochemistry of the species involved in the low-temperature reaction sequence ($RH$, $\dot{R}$, $RO_2H$, $R\dot{O}_2$, $\dot{Q}OOH$ and $\dot{O}_2QOOH$ species) significantly affect fuel reactivity. The NGA values were developed based on all of these species except $\dot{O}_2QOOH$ radicals. The thermochemistry of $\dot{O}_2QOOH$ species cannot be accurately calculated with the NGA representations due to the importance of non-next-nearest neighbor interactions of –OOH substitution. Further development of the NGA method to capture such interactions is in progress. Overall, the model developed using the NGA thermochemistry shows better agreement with experimental data than the model using thermochemistry from affordable and prominent QM methods, such as QM3. Based on the results presented for propane, the pentane isomers and n-heptane, the thermochemistry calculated using the NGA method can be used to model the oxidation of higher order hydrocarbons at low temperatures.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Plasma-assisted deflagration to detonation transition in a microchannel with fast-frame imaging and hybrid fs/ps coherent anti-Stokes Raman scattering measurements

Our study examines kinetic enhancement by nanosecond dielectric barrier discharge (ns-DBD) plasma on fuellean dimethyl ether (DME), oxygen (O 2 ), and argon (Ar) premixtures during deflagration to detonation transition (DDT) experiments in a microchannel. Non-equilibrium plasma produces active species and radicals and creates fast and slow heating of a mixture to promote ignition due to electronic and vibrational excitation. Experiments have been conducted to examine the influence of the plasma discharge on the premixture and on the resultant deflagration to detonation transition (DDT) onset time and distance through the use of high speed imaging and one-dimensional, two-beam, femtosecond/picosecond, coherent anti-Stokes Raman scattering (CARS). A highspeed camera is used to trace the time histories of flame front position and velocity and to identify the dynamics and onset of DDT. The results show that plasma discharge can nonlinearly affect the onset time and distance of DDT. It is shown that a small number of plasma discharge pulses prior to ignition result in reduced DDT onset time and distance by 60% and 40%, respectively, when compared to the results without pre-excitation by ns discharges. The results also show that an increase of plasma discharge pulses results in an extended DDT onset time and distance of 224% and 94%, respectively. Time history of the deflagration wave speed of DME and the analysis of ignition timescale under the choking condition of the deflagration front suggest low temperature ignition may play a role for DME near the isobaric choking condition of the burned gas and the DDT. Plasmainduced conversion of the reactive mixture was assessed via the O 2 to CO 2 ratio as measured through fs/ps CARS during the DBD discharges. The present experiments demonstrate the ability of non-equilibrium plasma to alter the chemistry of DME/O 2 /Ar premixtures in order to control DDT for applications in advanced propulsion engines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Probing O 2 dependence of hydroperoxy-butyl reactions via isomer-resolved speciation

Degenerate chain-branching mechanisms of n-alkanes are centered on the formation of hydroperoxy-alkyl radicals ($\dot{Q}$OOH), formed via $\dot{R}$ + O 2 reactions, and the ensuing competition between unimolecular decomposition and second-O 2 -addition. Quantitative measurements of partially oxidized intermediates formed via reactions of $\dot{Q}$OOH provide critical constraints that are required for accurate modeling of combustion chemistry. To examine the influence of temperature and oxygen concentration on intermediates from unimolecular decomposition of $\dot{Q}$OOH, isomer-resolved speciation measurements were conducted on n-butane oxidation at 835 Torr in a jet-stirred reactor (JSR) from 500 – 900 K. Resulting from negative-temperature coefficient behavior, cyclic ether formation peaked at two temperatures, 650 K and 800 K, which were selected for separate experiments to quantify the O 2 -dependence of species profiles using O 2 concentrations of 4.2 · 10 17 – 1.1 · 10 19 molecules cm –3 . Utilizing vacuum-ultraviolet absorption spectroscopy and electron-impact mass spectrometry, cyclic ether isomers were quantified separately, including explicit resolution of cis– and trans– isomers of 2,3-dimethyloxirane. Stereoisomers of 2-butene were also quantified explicitly. For all cyclic ethers, a common trend in O 2 -dependence emerged: species concentrations reach a maximum near 3.0 · 10 18 molecules cm –3 (equivalence ratio of 0.5). Although quantitative disparities are evident, chemical kinetics modeling qualitatively reproduces the O 2 dependence of species at 650 K. However, at 800 K, weak dependence on O 2 is predicted, which is in contrast with the measurements. Two carbonyls, diacetyl and methyl vinyl ketone, were also quantified and follow similar dependence on [O 2 ] and temperature as the cyclic ethers, which indicates some fraction forms via $\dot{Q}$OOH-mediated reactions. The discrepancies between the measured and model-predicted species profiles indicate that sub-mechanisms for important intermediates may require additional elementary reactions, including stereochemical-specific reactions, to improve the fidelity of n-alkane combustion modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Visualization of post-detonation fireball flowfields and comparison to CFD modeling

Visualization of flow structures within post-detonation fireballs has been performed for benchmark validation of numerical simulations. Custom pressed PETN explosives with a 12-mm diameter hemispherical form factor were used to produce a spherically symmetric post-detonation flow with low soot yield. Hydroxyl-radical planar laser induce fluorescence (OH-PLIF) was employed to visualize the structure ranging from approximately 10 μs to 35 μs after shock breakout from the explosive pellet. Fireball simulations were performed using the HyBurn Computational Fluid Dynamics (CFD) package. Experimental OH-PLIF results were compared to synthetic OH-PLIF from post-processing of CFD simulations. From the comparison of experimental and synthetic OH-PLIF images, CFD is shown to replicate much of the flow structure observed in the experiments, revealing potential differences in turbulent length scales and OH kinetics. Furthermore, results provide significant advancement in experimental resolution of these harsh turbulent combustion environments and validate physical models thereof.

Detonator↗
DOE OSTI2024

Styrene Thermal Decomposition and Its Reaction with Acetylene under Shock Tube Pyrolysis Conditions: an Experimental and Kinetic Modeling Study

Styrene is an important compound for polymer production and a key intermediate in gas-phase kinetics of polycyclic aromatic hydrocarbons (PAHs). For the first time, the pyrolysis of styrene with and without the presence of acetylene is investigated in a single-pulse shock tube coupled to gas chromatography and mass spectrometry. For each reaction system, quantitative speciation profiles are probed within the temperature range of 1100-1730 K, nominal pressure of 20 bar, and reaction duration of similar to 4 ms. A kinetic model is built to simulate the results. The model explains how styrene is consumed under high-pressure pyrolytic conditions, how the secondary chemistry of intermediate products affect subsequent PAH formation, and how acetylene addition alters the reaction pathways. Throughout the temperature range, styrene breakdown is dominated by the bimolecular interaction between styrene and hydrogen atom, which produces benzene+vinyl or phenyl and ethylene through the stabilization of 2-phenylethyl and its subsequent dissociation. As a result, large amounts of phenyl accumulate, which react with styrene to form C14H12 species while simultaneously releasing H atoms through addition/elimination reactions. The reactivity of fuel consumption is preserved by the regeneration of H atoms as chain carriers. Several C14H10 compounds are formed as a result of the following breakdown of the C14H12 isomers, particularly stilbene, 1,1-diphenyl ethylene, and 9-methyl-9H-fluorene. The presence of acetylene as a co-reactant with styrene allows the Hydrogen-Abstraction-Acetylene-Addition (HACA) pathway to proceed from phenyl radical to enhance the production of phenylacetylene at very low temperatures and acenaphthylene. This hinders the formation of C14H12 isomers, exclusive products from pure styrene dissociation by competing with the styrene+phenyl routes.

Kinetic Modeling↗
DOE OSTI2024

High pressure ammonia/methanol oxidation up to 100 atm

Here, high pressure ammonia/methanol oxidation and NOx formations were investigated using a recently developed supercritical pressure jet-stirred reactor (SP-JSR) at 20 and 100 atm with temperatures between 550 and 950 K and equivalence ratios of 0.138 and 1.15. The experimental results show that NH 3 oxidation at high pressure is significantly accelerated by the active OH radicals produced from CH 3 OH oxidation. Furthermore, the kinetic interactions between NH 3 and CH 3 OH are governed mainly by the reactions CH 3 OH + NH 2 = CH 2 OH + NH 3 , CH 3 OH + NH 2 = CH 3 O + NH 3 , and CH 2 O + NH 2 = HCO + NH 3 . A HP-Mech model for high-pressure NH 3 /CH 3 OH oxidation was developed in this study. It consists of the most recent NH 3 and CH 3 OH models including some new reactions and updated rate constants from the literature as well as NH 3 -CH 3 OH interactions where rate constants of CH 3 OH + NH 2 = CH 2 OH + NH 3 , CH 3 OH + NH 2 = CH 3 O + NH 3 , NH 2 + CH 2 O = NH 3 + HCO, and NH 2 + CH 2 O = NH 2 CHO + H were theoretically calculated in this study. Our model with these updates improves the prediction for the measured N 2 O/NO x temperature dependence at 100 atm. In addition, the reaction pathway and sensitivity analysis show that N 2 O/NO x /HONO interactions with HO 2 are very important, especially for a fuel-lean mixture at 100 atm. The HONO mole fraction for the fuel-lean mixture at 100 atm was then measured by off-axis integrated cavity output spectroscopy (ICOS) at wavenumber of 6638.26 cm -1 . The experimental data show a significant HONO formation at intermediate temperature that is strongly underpredicted by numerical simulation at 100 atm. Therefore, the HONO related reactions with notable uncertainty at high pressure such as NO + OH (+M) = HONO (+M) and H 2 NO + NO 2 = HONO + HNO need deeper exploration in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing O 2 -dependence of cyclopentyl reactions via isomer-resolved speciation

Modeling chemical kinetics relevant to low-temperature combustion requires complete description of reactions involving critical species such as hydroperoxyalkyl radicals, Q̇OOH, which undergo competing unimolecular reactions and bimolecular reactions with O 2 . The balance of flux across the two pathways affects rates of chain-branching and depends on temperature, pressure, and oxygen concentration. Accordingly, the influence of [O 2 ] on product formation from alkyl + O 2 reactions and the subsequent fate of Q̇OOH and related products is central to the development of an accurate chemical kinetics mechanism. Furthermore, chemical reactions consuming Q̇OOH-mediated species are often simplified to such a degree that mechanism truncation error (uncertainty derived from incomplete reaction networks) becomes significant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Analysis of soot formation from aviation fuels in laminar counterflow flames

Combustion emissions from aviation contribute to the formation of condensation trail (contrail) that can lead to the formation of anthropogenic cirrus clouds. Ice particles that form contrails are observed to have a linear correlation with soot particle number density. Synthetic aviation fuels (SAFs) offer a promising route to mitigate the production of soot particles while also increasing energy security. Although studies have focused on combustion and spray behavior, the detailed investigation of soot formation processes for different jet fuels and their impact on models for computational fluid dynamics (CFD) applications is not well understood. Moreover, experimental measurements of soot for canonical flames using Synthetic aviation fuels (SAF) for model validation remain scarce. To address this, we use employed the Lawrence Livermore National Laboratory (LLNL) detailed soot model based on the discrete sectional method. Additionally, we develop two reduced chemical mechanisms for Jet-A and Alcohol-to-Jet (C1) that are suitable for turbulent flame simulations and couple them with the Hybrid Method of Moments (HMOM). The detailed and reduced model frameworks are validated against experimental measurements of soot volume fraction (ƒ ν ) from a counterflow burner experiment previously reported in the literature. Given the good agreement between modeling results and experimental measurements for the (1) spatial distribution of ƒ ν and (2) the non-linear variation of peak ƒ ν with strain rate, we further investigate the modeled sub-processes (nucleation, condensation, surface growth, and oxidation) using the LLNL model to analyze the assumptions in the reduced model framework. Furthermore, the results indicate a significant contribution from resonant radicals to the surface growth of soot particles, which are not accounted for in the current implementation of HMOM and could help reconcile soot predictions by the reduced model with observations.

Counterflow↗
DOE OSTI2026

Flame stabilization in DME spray flames under engine-relevant conditions characterized by OH* chemiluminescence and formaldehyde laser-induced fluorescence

The transient and quasi-steady flame structures of Dimethyl Ether (DME) fuel sprays, produced by a single-hole injector (Spray D), were investigated using Planar Laser-Induced Fluorescence (PLIF) and chemiluminescence imaging in a constant-volume chamber under Engine Combustion Network (ECN) Spray A conditions (900 K ambient temperature, 60 bar ambient pressure, 1500 bar injection pressure, and 22.8 kg/m 3 ambient density). Low-temperature chemical reaction zones were visualized using formaldehyde (CH 2 O) PLIF with 355 nm excitation, while high-temperature flame regions were captured via chemiluminescence imaging of excited-state hydroxyl radicals (OH*). Both transient and quasi-steady flame structures clearly show the transition from CH 2 O to OH*, highlighting the progression from low- to high-temperature combustion, while the position of the flame is displaced for DME compared to reference hydrocarbon n-dodecane. Homogeneous reactor calculations with detailed chemistry and using adiabatic mixing for initial temperature show that CH 2 O peaks are significantly higher for DME at the same equivalence ratio, with a higher heat-release during the cool-flame regime with respect to the fuel heating value. Thus, the cool-flame dynamic as a precursor to high-temperature combustion and flame stabilization exhibit distinct behavior for DME relative to conventional hydrocarbons, and these phenomena are effectively resolved through the soot-free nature of DME and the high-speed, time-resolved diagnostics.

CH2O laser-induced fluorescence↗
DOE OSTI2026

ab initio Sub-Mechanism Development for Cyclopentene Oxidation

To accurately predict low-temperature oxidation behavior, chemical kinetics mechanisms must contain complete reaction networks that include detailed consumption reactions of intermediates produced directly from hydroperoxyalkyl radicals, Q̇OOH, which undergo competing unimolecular reactions and bimolecular reactions with O2. Rates of chain-branching are governed by the flux between the two competing pathways, and inherently depend on temperature, pressure, and oxygen concentration. Neglect of consumption pathways for major oxidation intermediates leads to mechanism truncation error that is ameliorated by expanding the level of detail included in sub-mechanisms and employing ab initio methods for computing rates of elementary reactions and thermochemical properties of species involved. In the present work, an ab initio-derived sub-mechanism is developed using AutoMech to model the chemical kinetics of cyclopentene, a major product of cyclopentane oxidation. The ab initio sub-mechanism builds on a detailed mechanism developed using Reaction Mechanism Generator (RMG) for the specific purpose of determining the extent to which replacing cyclopentene-specific reactions and species with quantum chemical computations reduces model inaccuracies resulting from mechanism truncation error. In an effort to minimize interference from other reactions present during the formation of cyclopentene from cyclopentyl + O2, providing a narrower experimental scope, the model is compared against speciation measurements from jet-stirred reactor (JSR) experiments on cyclopentene oxidation. The experiments utilize vacuum ultraviolet-absorption spectroscopy and mass spectrometry for isomer-resolved speciation of intermediates at 835 Torr from 700 – 950 K. [O2]-dependent experiments were also conducted from 0.057 – 2.01 · 1018 molecules cm–3 at 825 K to examine the influence of oxygen on species profiles. Model predictions using the ab initio-revised mechanism yielded significant improvements in species profiles for both the temperature- and [O2]-dependent measurements, owing in part to increased rates of HOȮ and H2O2 production, which underscores the influence of theoretical calculations of reaction rates involving species produced from Ṙ + O2 such as cyclopentene.

AutoMech↗
DOE OSTI2021

Gamma and pulsed electron radiolysis studies of CyMe 4 BTBP and CyMe 4 BTPhen: Identification of radiolysis products and effects on the hydrometallurgical separation of trivalent actinides and lanthanides

The radiolytic stability of the highly selective ligands CyMe 4 BTBP and CyMe 4 BTPhen against ionizing gamma radiation was studied in 1-octanol solution. CyMe 4 BTBP and CyMe 4 BTPhen are important extractants for a potential treatment of used nuclear fuel. They were studied under identical experimental conditions to directly compare the effects of gamma and pulsed electron radiolysis on the ligands and systematically study the influence of structural changes in the ligand backbone. Distribution ratios of Am 3+ , Cm 3+ and Eu 3+ , the residual concentration of CyMe 4 BTBP and CyMe 4 BTPhen in solution, and the formation of radiolysis products were studied as a function of absorbed gamma dose and presence of an acidic aqueous phase during irradiation. Quantitative and semi-quantitative analyses were used to elucidate the radiolysis mechanism for both ligands. Addition products of alpha-hydroxyoctyl radicals formed through radiolysis of the 1-octanol diluent to the ligand molecules were identified as the predominant radiolysis products. These addition products also extract trivalent metal ions, as distribution ratios remained high although the parent molecule concentrations decreased. Therefore, the utilization time of a solvent using these extractants under the harsh conditions of used nuclear fuel treatment could be considerably longer than expected. Understanding the radiolysis mechanism is crucial for designing more radiation resistant extractants.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Characteristics and radiolysis behavior of polyvinylchloride under accelerated proton and γ-irradiation

Here the effect of high energy protons and γ-irradiation on the structural properties, surface-energies, and toxicological properties of polyvinyl chloride (PVC) were studied due to the role PVC products play in many technologies including the nuclear industry. Accelerated 1–4 MeV protons impacting on PVC in vacuum lead to the formation of polyenyl radicals as shown by EPR and to an increase in free surface energy due to functionalization of the surface of the irradiated polymer. γ-irradiation leads to the formation of unsaturated bonds, carbonyl and hydroxyl groups as shown by IR and to the release of HCl. Correlated molecular orbital theory calculations of reaction thermodynamics were used to aid in the development of a mechanism in the absence of oxygen. The formation and accumulation of chromophores and auxochromic groups during γ-radiolysis of PVC leads to a gradual change of the initial white color of the polymer to yellow and then to brown and black with high sensitivity. A mixture of powdered PVC and silicate glue was used to determine the profile of a 60 Co γ-radiation beam on targets with a complex relief. γ-irradiated polymer does not have a local irritating effect due to a single application to the skin of mice in an adhesive mixture at a concentration of up to 5000 mg/kg. γ-radiolysis of PVC powder in air with a dose of up to 1400 kGy does not affect its acute toxicity when administered intragastrically to BDF1 mice. PVC and its γ-irradiated analogs are non-toxic at doses ≤5000 mg/kg.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Dioctyl ether radiolysis under used nuclear fuel reprocessing conditions: Foundational knowledge for the development of sacrificial ligand grafts

Radiation-induced ligand destruction and concomitant degradation product formation is unavoidable under envisioned used nuclear fuel reprocessing conditions, and ultimately limits the recyclability of a given solvent system formulation. With this in mind, a novel approach to ligand innovation for advanced separations processes is in the design of tailored “protomolecules,” which when exposed to ionizing radiation undergo desired chemical transformations, thereby allowing for a reprocessing solvent system to advantageously evolve with absorbed radiation dose. Here we provide foundational knowledge for the time-resolved (electron pulse) and steady-state (cobalt-60 gamma) radiolytic behavior of dioctyl ether, a protomolecule grafting surrogate. Gamma irradiation of single-phase solutions of dioctyl ether (5–100 vol.%) in n-dodecane resulted in the loss of dioctyl ether (G = -0.72 µmol J –1 ) and the formation of octane (G = 0.11 µmol J –1 ) and octanol (G = 0.15 µmol J –1 ) degradation products, the latter of which is a known reprocessing phase modifier and radioprotectant. Further, these radiation-induced changes were attributed to direct radiation effects, for more concentrated dioctyl ether solutions, and indirect radiation effects, predominantly driven by the reaction of dioctyl ether with the dodecane radical cation, for which we report a second-order rate coefficient of k = (1.53 ± 0.05) × 10 10 L mol –1 s –1 . Under typical biphasic extraction (4.0 mol L –1 HNO 3 ) and strip (0.1 mol L –1 HNO 3 ) reprocessing conditions, gamma irradiation of 5 vol.% dioctyl ether solvent systems afforded negligible change in the rate of parent molecule destruction but promoted significant differences in the radiolytic behavior of its degradation products. These differences are attributed to their respective interactions with [dioctyl ether/HNO 3 /H 2 O] and [octanol/HNO 3 /H 2 O] adducts extracted into the organic phase. Overall, these results support the grafting of ether linkages to advanced separations ligands (e.g., modified diglycolamides).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗