Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Locking of length scales in two-band superconductors

Here, a model of a clean two-band s-wave superconductor with cylindrical Fermi surfaces, different Fermi velocities v 1,2 , and a general 2×2 coupling matrix V αβ is used to study the order parameter distribution in vortex lattices. The Eilenberger weak coupling formalism is used to calculate numerically the spatial distributions of the pairing amplitudes Δ 1 and Δ 2 of the two bands for vortices parallel to the Fermi cylinders. For generic values of the interband coupling V 12 , it is shown that, independently of the couplings V αβ , of the ratio v 1 /v 2 , of the temperature, and the applied field, the length scales of spatial variation of Δ 1 and of Δ 2 are the same within the accuracy of our calculations. The only exception from this single length-scale behavior is found for V 12 << V 11 , i.e., for nearly decoupled bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photometric redshifts and intrinsic alignments: Degeneracies and biases in the 3 × 2 pt analysis

We present a systematic study of cosmological parameter bias in weak lensing and large-scale structure analyses for upcoming imaging surveys induced by the interplay of intrinsic alignments (IA) and photometric redshift (photo-z) model misspecification error. We first examine the degeneracies between the parameters of the tidal alignment–tidal torquing (TATT) model for IA and of a photo-z model including a mean shift ( Δ z ¯ ) and variance ( σ z ) for each tomographic bin of lenses and sources, under a variety of underlying true IA behaviors. We identify strong degeneracies between: (1) the redshift scaling of the tidal alignment amplitude and the mean shift and variances of source bins, (2) the redshift scaling of the tidal torquing amplitude and the variance of the lowest- z source bin, and (3) the IA source density weighting and the mean shift and variance of several source bins. We then use this information to guide our exploration of the level of cosmological parameter bias which can be induced given incorrect modeling of IA, photo-z, or both. We find that marginalizing over all the parameters of TATT is generally sufficient to preclude cosmological parameter bias in the scenarios we consider. However, this does not necessarily mean that IA and photo-z parameters are themselves unbiased, nor does it mean that the best-fit model is a good fit to the data. We also find scenarios where the inferred parameters produce χ d . o . f . 2 values indicative of a good fit but cosmological parameter bias is significant, particularly when the IA source density weighting parameter is not marginalized over. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dark baryon black holes

We explore a novel mechanism for dark matter production through the formation of light black holes from the collapse of dark baryons in confining SU(N) gauge theories in the large- N limit. While glueballs and mesons cannot form black holes under physically reasonable conditions, we prove that for appropriate ranges of the confinement scale, quark masses, number of colors N , and dark sector temperature, dark baryons can produce Planck-scale black hole relics in the early Universe. Assuming the relics are stable, the abundance of both the dark baryon black hole population directly arising at confinement and that frozen in from dark glueball and meson pair annihilation are exponentially suppressed in N , leading to an upper limit N ≲ 100 and of a few hundred Planck units in mass for models where the black hole relics are the entirety of the dark matter. We present a detailed numerical study of the parameter space where this scenario is realized. Published by the American Physical Society 2025

Profumo, Stefano (ORCID:0000000291597556)↗

Dirac-Born-Infeld actions and tachyon monopoles

We investigate magnetic monopole solutions of the non-Abelian Dirac-Born-Infeld (DBI) action describing two coincident non-BPS D9-branes in flat space. Just as in the case of kink and vortex solitonic tachyon solutions of the full DBI non-BPS actions, as previously analyzed by Sen, these monopole configurations are singular in the first instance and require regularization. We discuss a suitable non-Abelian ansatz that describes a pointlike magnetic monopole and show it solves the equations of motion to leading order in the regularization parameter. Fluctuations are studied and shown to describe a codimension three BPS D6-brane, and a formula is derived for its tension.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ideal gas in a strong gravitational field: Area dependence of entropy

We study the thermodynamic parameters like entropy, energy etc. of a box of gas made up of indistinguishable particles when the box is kept in various static background spacetimes having a horizon. We compute the thermodynamic variables using both statistical mechanics as well as by solving the hydrodynamical equations for the system. When the box is far away from the horizon, the entropy of the gas depends on the volume of the box except for small corrections due to background geometry. As the box is moved closer to the horizon with one (leading) edge of the box at about Planck length (L{sub p}) away from the horizon, the entropy shows an area dependence rather than a volume dependence. More precisely, it depends on a small volume A{sub perpendicular}L{sub p}/2 of the box, up to an order O(L{sub p}/K){sup 2} where A{sub perpendicular} is the transverse area of the box and K is the (proper) longitudinal size of the box related to the distance between leading and trailing edge in the vertical direction (i.e. in the direction of the gravitational field). Thus the contribution to the entropy comes from only a fraction O(L{sub p}/K) of the matter degrees of freedom and the rest are suppressed when the box approaches the horizon. Near the horizon all the thermodynamical quantities behave as though the box of gas has a volume A{sub perpendicular}L{sub p}/2 and is kept in a Minkowski spacetime. These effects are: (i) purely kinematic in their origin and are independent of the spacetime curvature (in the sense that the Rindler approximation of the metric near the horizon can reproduce the results) and (ii) observer dependent. When the equilibrium temperature of the gas is taken to be equal to the horizon temperature, we get the familiar A{sub perpendicular}/L{sub p}{sup 2} dependence in the expression for entropy. All these results hold in a D+1 dimensional spherically symmetric spacetime. The analysis based on methods of statistical mechanics and the one based on thermodynamics applied to the gas treated as a fluid in static geometry, lead to the same results showing the consistency. The implications are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photovoltaic Material Characterization With Steady State and Transient Photoluminescence

Here, we develop an approach to characterize the surface and bulk properties for thin films of photovoltaic materials by combining two experimental photoluminescence (PL) techniques with one multiphysics simulation. This contactless, in-line characterization technique allows reliable extraction of key lifetime parameters. In this study, we first discuss the strengths and weaknesses of both steady-state and transient PL techniques (specifically, steady-state PL excitation spectroscopy and time-resolved PL) and show that combining them with numerical simulation can be used to extract surface and bulk lifetimes self consistently. The method is applied to InP thin films grown with a novel vapor– liquid–solid method. Lastly, the InP thin film tested is found to have a bulk Shockley–Read–Hall (SRH) lifetime of 12 ns and a front surface recombination velocity of 5 × 10 4 cm/s.

36 MATERIALS SCIENCE↗

Effect of Mg Content in Melt-Spun Mn–Bi–Mg–Sb–In Alloys on the Structure and Properties of Field-Annealed Magnets

Mn-Bi alloys modified with Mg and other elements were recently developed into promising rare-earth-free permanent magnets through successive melt-spinning, warm compaction, and short magnetic-field annealing. This letter reports herein on the crystal structures, texture, and magnetic properties observed in Mn 50 Bi 49-x Mg x Sb 0.5 In 0.5 alloys (x = 0, 1.5, 3.0, 4.5) throughout these processing steps. The Mg substitution favors MnBi-based intermetallic phases over the Bi- and Mn-based solid solutions and the stable α intermetallic phase over the metastable β' intermetallic phase. Magnesium increases the c/a ratio of the α phase lattice parameters for all studied x values and it increases the degree of the field-annealing-induced texture for x ≤ 3. The effect of Mg on coercivity is explained as combination of a positive one via the α phase magnetocrystalline anisotropy and a negative one via the development of texture. The effect of the substitution on the maximum energy product additionally involves the decreasing density of the alloys; the optimum x is found to be ≈3. Additionally reported are the thermal properties of selected alloys. The mechanism of field-annealing effect on the coercivity is briefly discussed.

36 MATERIALS SCIENCE↗

WorkingFluid Selection and Technoeconomic Optimization of a Turbocompression CoolingSystem

Abstract Low grade waste heat recovery presents an opportunity to utilize typically wasted energy to reduce overall energy consumption and improve system efficiencies. In this work, the technoeconomic performance of a turbocompression cooling system (TCCS) driven by low grade waste heat in the engine coolant of a large marine diesel generator set is investigated. Five different working fluids were examined to better understand the effects of fluid characteristics on system performance: R134a, R245fa, R1234ze(E), R152a, and R600a. A coupled thermodynamic, heat exchanger, and economic simulation was developed to calculate the simple payback period of the waste heat recovery system, which was minimized using a search and find optimization routine with heat exchanger effectiveness as the optimization parameter. A sensitivity study was performed to understand which heat exchanger effectiveness had the largest impact on payback period. Of the five working fluids examined, a TCCS with R152a as the working fluid had the lowest payback period of 1.46 years with an initial investment of $181,846. The R152a system was most sensitive to the two-phase region of the power cycle condenser. The R1234ze(E) system provided the largest return on investment over a ten year lifetime of $1,399,666.

Engineering↗

WE-E-BRE-10: Level of Breast Cancer Stem Cell Correlated with Tumor Radioresistence: An Indication for Individualized Breast Cancer Therapy Adapted to Cancer Stem Cell Fractions

Purposes: The presence of cancer stem cells (CSCs) in a solid tumor could result in poor tumor control probability. The purposes are to study CSC radiosensitivity parameters α and β and their correlation to CSC levels to understand the underlying radioresistance mechanisms and enable individualized treatment design. Methods: Four established breast cancer cell lines (MCF-7, T47D, MDA-MB-231, and SUM159PT) were irradiated in vitro using single radiation doses of 0, 2, 4, 6, 8 or 10 Gy. The fractions of CSCs in each cell lines were determined using cancer stem cell markers. Mammosphere assays were also performed to better estimate the number of CSCs and represent the CSC repopulation in a human solid tumor. The measured cell surviving fractions were fitted using the Linear-quadratic (LQ) model with independent fitting parameters: α-TC, β-TC (TCs), α-CSC, β-CSC (CSCs), and fs (the percentage of CSCs in each sample). Results: The measured fs increased following the irradiation by MCF-7 (0.1%), T47D (0.9%), MDA-MB-231 (1.18%) and SUM159T (2.46%), while decreasing surviving curve slopes were observed, indicating greater radioresistance, in the opposite order. The fitting yielded the radiosensitive parameters for the MCF-7: α-TC=0.1±0.2Gy{sup −1}, β-TC= 0.08 ±0.14Gy{sup −2}, α-CSC=0.04±0.07Gy{sup −1}, β-CSC =0.02±0.3Gy{sup −2}; for the SUM159PT, α-TC=0.08±0.25 Gy{sup −1}, β-TC=0.02±0.02Gy{sup −2}, α-CSC=0.04±0.18Gy{sup −1}, β-CSC =0.004±0.24Gy{sup −2}. In the mammosphere assay, where fs were higher than the corresponding cell line assays, there was almost no shoulder found in the surviving curves (more radioresistant in mammosphere assays) yielding β-CSC of approximately 0. Conclusion: Breast cancer stem cells were more radioresistant characterized by smaller α and β values compared to differentiated breast cancer cells. Percentage of breast cancer stem cells strongly correlated to overall tumor radioresistance. This observation suggested the feasibility of individualized radiotherapy prescription based on the fractions of cancer stem cells found in biopsy.

60 APPLIED LIFE SCIENCES↗

Scattering of electromagnetic pulses on metallic nanospheres with the inclusion of plasmon interference effects

The spectral–angular features of the scattering of electromagnetic pulses with various durations (from quasimonochromatic to ultrashort) on metallic nanoparticles in a dielectric medium have been studied for various parameters of the problem. It has been shown that the character of the interference of contributions from surface plasmons with various multipole orders significantly depends on the scattering angle and is responsible for sharp features in the scattering spectrum of monochromatic radiation. The dependence of the probability and scattering spectrum on the duration of a pulse and the scattering angle has been analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The application of multi-wire drift chambers in cosmic ray research

Multiwire drift chambers designed for the neutrino experiment at the IHEP U-70 accelerator have found a new application in the MEPhI experiment focused on the detection of ultrahigh-energy cosmic rays. Their high durability and fine spatial and angular characteristics make these chambers perfectly suitable for such studies. The drift chambers were tested at MEPhI and used in constructing the CTUDC coordinatetracking setup, which operated together with the NEVOD water Cherenkov detector and the DECOR detector. The results of the studies of the parameters of drift chambers in the cosmic-ray flux at test benches and in the CTUDC setup are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of the Thermal Neutron Spectrum of the W-Be Photoneutron Source of the INR RAS

The possibility of reconstructing the neutron flux density of a W-Be photoneutron source using neutron activation analysis of Ag, Mn, Fe, Mn, and Ti samples is considered. The use of simple functions as AE{sup –B}, describing particular regions of the spectrum, as a reconstruction option is discussed. The dependence of the deviation of the measured reaction rates on those calculated in this study on the parameters of approximating functions is investigated. The convergence of the reconstruction results is obtained by increasing the amount of experimental data. This reconstruction method can be used for the operational measurement of the thermal neutron flux density of the photoneutron source and for the optimization of the source parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

X-pinch-based neutron source

Results are presented from experimental studies of the parameters of an X-pinch-based neutron source made of 70- to 80-{mu}m-diameter deuterated polyethylene fibers. At currents of up to 1.7 MA and a current rise time of {approx}150 ns, hot plasma spots were observed in the fiber crossing region. The formation of hot spots was accompanied by the generation of short soft X-ray pulses with a duration of 2-4 ns, as well as by neutron emission. The neutron energy was measured using the time-of-flight technique in four directions, at 0{sup o}, 90{sup o}, 180{sup o}, and 270{sup o} with respect to the load axis. The mean energy of the neutrons emitted along the axis towards the anode and cathode was found to be 2.0 {+-} 0.2 and 2.6 {+-} 0.1 MeV, respectively, and that of neutrons emitted in two opposite directions along the radius, 2.5 {+-} 0.1 and 2.4 {+-} 0.1 MeV. The maximum neutron yield at a current amplitude of 1.6 MA was of 10{sup 10} neutrons per shot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of the structure of the plasma current sheath in a plasma focus discharge

The study is aimed at investigating the fine structure of the plasma current sheath (PCS) in the PF-3 plasma focus facility. The PCS dynamics in a deuterium discharge was studied. The PCS parameters were measured using absolutely calibrated magnetic probes installed at different positions with respect to the facility axis and the anode surface. A magneto-optical probe recording both the magnetic signal and the PCS optical luminosity was first applied to analyze the PCS structure. This made it possible to spatially resolve the current and shock-wave regions. It is demonstrated that the current distribution is different in different discharge stages. It is shown that the neutron yield is determined by the value of the current compressed toward the axis, rather then the amplitude of the total discharge current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pulsed microwave discharge in a capillary filled with atmospheric-pressure gas

A pulsed microwave coaxial capillary plasma source generating a thin plasma filament along the capillary axis in an atmospheric-pressure argon flow is described. The dynamics of filament formation is studied, and the parameters of the gas and plasma in the contraction region are determined. A physical model of discharge formation and propagation is proposed. The model is based on the assumption that, under the conditions in which the electric fields is substantially below the threshold value, the discharge operates in a specific form known as a self-sustained-non-self-sustained (SNS) microwave discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the Electron Distribution in GaN and GaAs after γ-Neutron Irradiation

The results of experimental studies of the parameters of GaN and GaAs structures before and after γ-neutron irradiation are reported. A special set of test diodes making it possible to reduce the error in the results of measuring the parameters of the structures, which is important in the design and optimization of the structure of semiconductor devices, is suggested.

36 MATERIALS SCIENCE↗

Control of circular polarization of electroluminescence in spin light-emitting diodes based on InGaAs/GaAs/δ〈Mn〉 heterostructures

Circularly polarized luminescence of light-emitting InGaAs/GaAs structures with a delta-doped Mn layer in a GaAs barrier was studied. The structural parameters were varied by different ways, among them are homogeneous and delta-doping with acceptor impurity, and removal of donor doping from the technological process. As it was found, the magnitude and polarity of the degree of circular polarization of luminescence strongly depend on the technological mode chosen. Simultaneous modeling of wave functions of structures highlights a good agreement between the parameters of circularly polarized luminescence and spatial distribution of wave functions of heavy holes relative to the Mn delta-layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Bismuth on the Structural Perfection and the Luminescent Properties of Thin-Film Elastically Stressed Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb Heterostructures

The effect of bismuth on the structural perfection and the luminescent properties of Al{sub x}In{sub y}Ga{sub 1–x–y}Bi{sub z}Sb{sub 1–z}/GaSb heterostructures has been studied. The optimal parameters of the process of zone recrystallization with temperature gradient at which epitaxial AlInGaBiSb layers have the minimum roughness and high structural perfection have been revealed: temperature gradient 1 ≤ G ≤ 30 K/cm, the liquid zone thickness 60 ≤ l ≤ 100 μm, the temperature range 773 K ≤ T ≤ 873 K, and bismuth concentration 0.3–0.4 mol fraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗