Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

A Parametric Reduced-Order Model for Inverter Short-Circuit Response in Protection Studies

This paper presents a reduced-order model (ROM) for grid-following (GFL) inverters that reproduces inverter fault current trajectories, including sub transients, transient, and steady-state phases, across a range of fault types, locations, and pre-fault operating points. . The proposed model is developed by: Constructing the positive- and negative-sequence current with parameterization fitted by large data training and fitting Validating using EMT simulation against EMT full model and demonstrating the ROM's capability to capture fault current magnitude, phase angle, and oscillatory transients. Building a standard EMT simulation platform library component for easy configuration and application.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Data-Driven Mathematical Modeling of the Effect of Particle Size Distribution on the Transitory Reaction Kinetics of Hot Metal Desulfurization

The aim of this work was to develop a prediction model for hot metal desulfurization. More specifically, the study aimed at finding a set of explanatory variables that are mandatory in prediction of the kinetics of the lime-based transitory desulfurization reaction and evolution of the sulfur content in the hot metal. The prediction models were built through multivariable analysis of process data and phenomena-based simulations. The model parameters for the suggested model types are identified by solving multivariable least-squares cost functions with suitable solution strategies. One conclusion we arrived at was that in order to accurately predict the rate of desulfurization, it is necessary to know the particle size distribution of the desulfurization reagent. It was also observed that a genetic algorithm can be successfully applied in numerical parameter identification of the proposed model type. It was found that even a very simplistic parameterized expression for the first-order rate constant provides more accurate prediction for the end content of sulfur compared to more complex models, if the data set applied for the modeling contains the adequate information.

36 MATERIALS SCIENCE↗

Uncertainty and feasibility of dynamical downscaling for modeling tropical cyclones for storm surge simulation

This paper presents a modeling study conducted to evaluate the uncertainty of a regional model in simulating hurricane wind and pressure fields, and the feasibility of driving coastal storm surge simulation using an ensemble of region model outputs produced by 18 combinations of three convection schemes and six microphysics parameterizations, using Hurricane Katrina as a test case. Simulated wind and pressure fields were compared to observed H*Wind data for Hurricane Katrina and simulated storm surge was compared to observed high-water marks on the northern coast of the Gulf of Mexico. The ensemble modeling analysis demonstrated that the regional model was able to reproduce the characteristics of Hurricane Katrina with reasonable accuracy and can be used to drive the coastal ocean model for simulating coastal storm surge. Results indicated that the regional model is sensitive to both convection and microphysics parameterizations that simulate moist processes closely linked to the tropical cyclone dynamics that influence hurricane development and intensification. The Zhang and McFarlane (ZM) convection scheme and the Lim and Hong (WDM6) microphysics parameterization are the most skillful in simulating Hurricane Katrina maximum wind speed and central pressure, among the three convection and the six microphysics parameterizations. Error statistics of simulated maximum water levels were calculated for a baseline simulation with H*Wind forcing and the 18 ensemble simulations driven by the regional model outputs. The storm surge model produced the overall best results in simulating the maximum water levels using wind and pressure fields generated with the ZM convection scheme and the WDM6 microphysics parameterization.

Yang, Zhaoqing↗

Extrapolating active layer thickness measurements across Arctic polygonal terrain using LiDAR and NDVI data sets

Landscape attributes that vary with microtopography, such as active layer thickness (ALT), are labor intensive and difficult to document effectively through in situ methods at kilometer spatial extents, thus rendering remotely sensed methods desirable. Spatially explicit estimates of ALT can provide critically needed data for parameterization, initialization, and evaluation of Arctic terrestrial models. In this work, we demonstrate a new approach using high-resolution remotely sensed data for estimating centimeter-scale ALT in a 5 km 2 area of ice-wedge polygon terrain in Barrow, Alaska. We use a simple regression-based, machine learning data-fusion algorithm that uses topographic and spectral metrics derived from multisensor data (LiDAR and WorldView-2) to estimate ALT (2 m spatial resolution) across the study area. Comparison of the ALT estimates with ground-based measurements, indicates the accuracy (r 2 = 0.76, RMSE ±4.4 cm) of the approach. While it is generally accepted that broad climatic variability associated with increasing air temperature will govern the regional averages of ALT, consistent with prior studies, our findings using high-resolution LiDAR and WorldView-2 data, show that smaller-scale variability in ALT is controlled by local eco-hydro-geomorphic factors. This work demonstrates a path forward for mapping ALT at high spatial resolution and across sufficiently large regions for improved understanding and predictions of coupled dynamics among permafrost, hydrology, and land-surface processes from readily available remote sensing data.

58 GEOSCIENCES↗

A multiscale modeling framework model (superparameterized CAM5) with a higher‐order turbulence closure: Model description and low‐cloud simulations

Abstract In this study, a higher‐order turbulence closure scheme, called Cloud Layers Unified By Binormals (CLUBB), is implemented into a Multiscale Modeling Framework (MMF) model to improve low‐cloud simulations. The performance of CLUBB in MMF simulations with two different microphysics configurations (one‐moment cloud microphysics without aerosol treatment and two‐moment cloud microphysics coupled with aerosol treatment) is evaluated against observations and further compared with results from the Community Atmosphere Model, Version 5 (CAM5) with conventional cloud parameterizations. CLUBB is found to improve low‐cloud simulations in the MMF, and the improvement is particularly evident in the stratocumulus‐to‐cumulus transition regions. Compared to the single‐moment cloud microphysics, CLUBB with two‐moment microphysics produces clouds that are closer to the coast and agrees better with observations. In the stratocumulus‐to‐cumulus transition regions, CLUBB with two‐moment cloud microphysics produces short‐wave cloud forcing in better agreement with observations, while CLUBB with single‐moment cloud microphysics overestimates short‐wave cloud forcing. CLUBB is further found to produce quantitatively similar improvements in the MMF and CAM5, with slightly better performance in the MMF simulations (e.g., MMF with CLUBB generally produces low clouds that are closer to the coast than CAM5 with CLUBB). Improved low‐cloud simulations in MMF make it an even more attractive tool for studying aerosol‐cloud‐precipitation interactions.

54 ENVIRONMENTAL SCIENCES↗

Quantifying cloud base updraft speeds of marine stratocumulus from cloud top radiative cooling: QUANTIFYING CLOUD BASE UPDRAFTS OF MSC

Marine stratocumulus clouds play a significant role in the Earth's radiation budget. The updrafts at cloud base (Wb) govern the supersaturation and therefore the activation of cloud condensation nuclei, which modifies the cloud and precipitation properties. A statistically significant relationship between Wb and cloud top radiative cooling rate (CTRC) is found from the measurements of the Department of Energy's Atmospheric Radiation Measurement Mobile Facility on board a ship sailing between Honolulu and Los Angeles. A similar relation was found on Graciosa Island but with greater scatter and weaker correlation presumably due to the island effect. Based on the relation, we are able to estimate the cloud base updrafts using a simple formula: W b =-0.44 × CTRC + 22.30 ± 13, where the W b and CTRC have units of cm/s and W/m 2 , respectively. This quantification can be utilized in satellite remote sensing and parameterizations of W b in general circulation models.

54 ENVIRONMENTAL SCIENCES↗

Plant‐mediated methane transport in emergent and floating‐leaved species of a temperate freshwater mineral‐soil wetland

Abstract Methane flux from freshwater mineral‐soil (FWMS) wetlands and its variability among sites is largely modulated by plant‐mediated transport. However, plant‐mediated transport processes are rarely resolved in land surface models and are poorly parametrized for plants commonly found in FWMS wetlands. Here, relationships between methane flux and CO 2 uptake, as well as plant conductance of methane were evaluated for three plant species and two characteristic functional types: emergent (narrow‐leaved cattail) and floating‐leaved (American lotus and water lily). We found significant but contrasting correlations between methane flux and CO 2 uptake in cattails ( r 2 = 0.51, slope = −0.16, during morning) and water lily ( r 2 = 0.32, slope = 0.064, after midday). This relationship was not significant in American lotus, showing that stomata regulation of methane fluxes is species‐specific and not generalizable across the floating‐leaved plant functional type. Conductance of methane per leaf area showed distinct seasonal dynamics across species. Conductance was similar among the floating‐leaved species (6.2 × 10 −3 m d −1 in lotus and 7.2 × 10 −3 m d −1 in water lily) and higher than conductance in the emergent species (2.7 × 10 −3 m d −1 ). Our results provide direct observations of plant conductance rates and identify the vegetation parameters (leaf area, stomatal conductance) that modify them. Our results further suggest that models of methane emissions from FWMS should parameterize plant‐mediated transport in different plant functional types, scaled by leaf area and with variable seasonal phenological dynamics, and consider possible species‐specific mechanisms that control methane transport through plants.

Villa, Jorge A.↗

The bottom-up EFT: complete UV resonances of the SMEFT operators

The standard model effective field theory (SMEFT) provides systematic parameterization of all possible new physics above the electroweak scale. According to the amplitude-operator correspondence, an effective operator can be decomposed into a linear combination of several j-basis operators, which correspond to local amplitudes carrying certain spin and gauge quantum numbers in a particular scattering channel. Based on the Poincare and gauge symmetries of scattering amplitude, we construct the j-basis using the Casimir method for both the Lorentz and gauge sectors. The quantum numbers of the j-basis operators fix the quantum numbers of any intermediate state in the corresponding amplitudes, such as a UV resonance. This can be re-interpreted as the j-basis/UV correspondence, thus obtaining the j-bases in all partitions of fields for an operator amounts to finding all of its UV origins at tree level, constituting the central part of the bottom-up EFT framework. Applying the j-basis analysis to SMEFT, we obtain a complete list of possible tree-level UV origins of the effective operators at the dimension 5, 6, 7, and all the bosonic operators at dimension 8.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Soil microclimates influence annual carbon loss via heterotrophic soil respiration in maize and switchgrass bioenergy cropping systems

Heterotrophic soil respiration (R H ) is the main pathway of carbon (C) loss from litter and soil organic matter, and thus R H partially determines ecosystem C storage. Because R H is sensitive to soil temperature and moisture, aboveground factors that influence soil microclimate, such as plant structure and residue management, may in turn affect belowground C loss via R H , but this relationship has not been quantified. Here, e examined multiyear soil microclimate differences to 1-m depth, measured seasonal trends of R H , and parameterized crop-specific microclimate-RH models to quantify the effect of soil microclimate differences on annual R H in temperate no-till maize and switchgrass bioenergy cropping systems. Summertime soil temperatures were typically warmer in maize compared to switchgrass, likely resulting from lower leaf area index (LAI) in maize. In contrast, winter soil temperatures were usually warmer in switchgrass than maize, due in part to more consistent snow retention within the switchgrass litter stubble. Daily soil temperature ranges were less extreme in the perennial switchgrass system compared to the annual no-till maize system. Soil moisture near the soil surface was usually lower in maize than switchgrass, but the opposite was true below about 50 cm. R H showed strong seasonal trends, with warmer and drier soil conditions generally leading to higher R H in both crops. Modeled scenarios indicated that the differences in crop-specific soil microclimates accounted for 4 to 17% of the annual R H flux, with the dominant soil microclimate effects on R H occurring during the summer. So, the soil microclimate serves as a strong coupling between aboveground properties and belowground C loss via R H in temperate agroecosystems. Agricultural management practices such as planting date, plant density, and residue management could be targeted to promote soil microclimates that reduce R H , thereby reducing gaseous belowground C losses and potentially enhancing ecosystem C storage.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of the new Ultracold Neutron beamline at the LANL UCN facility

The neutron electric dipole moment (nEDM) experiment that is currently being developed at Los Alamos National Laboratory (LANL) will use ultracold neutrons (UCN) and Ramsey’s method of separated oscillatory fields to search for a nEDM. Here, in this paper, we present measurements of UCN storage and UCN transport performed during the commissioning of a new beamline at the LANL UCN source and demonstrate a sufficient number of stored polarized UCN to achieve a statistical uncertainty of δd n = 2 x 10 -27 e cm in 5 calendar years of running. We also present an analytical model describing data that provides a simple parameterization of the input UCN energy spectrum on the new beamline.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Turbulence-parameter estimation for current-energy converters using surrogate model optimization

Surrogate models maximize information utility by building predictive models in place of computational or experimentally expensive model runs. Marine hydrokinetic current energy converters require large-domain simulations to estimate array efficiencies and environmental impacts. Meso-scale models typically represent turbines as actuator discs that act as momentum sinks and sources of turbulence and its dissipation. An OpenFOAM model was developed where actuator disc k-ε turbulence was characterized using an approach developed for flows through vegetative canopies. Turbine-wake data from laboratory flume experiments collected at two influent turbulence intensities were used to calibrate parameters in the turbulence-source terms in the k-ε equations. Additionally, parameter influences on longitudinal wake profiles were estimated using Gaussian process regression with subsequent optimization minimizing the objective function within 3.1% of those obtained using the full model representation, but for 74% of the computational cost (far fewer model runs). This framework facilitates more efficient parameterization of the turbulence-source equations using turbine-wake data.

16 TIDAL AND WAVE POWER↗

The Lithophile Element Budget of Earth's Core

Abstract The relative composition of Earth's core and mantle were set during core formation. By determining how elements partition between metal and silicate at high pressures and temperatures, measurements of the mantle composition and geophysical observations of the core can be used to understand the mechanisms by which Earth formed. Here we present the results of metal‐silicate partitioning experiments for a range of nominally lithophile elements (Al, Ca, K, Mg, O, Si, Th, and U) and S to 85 GPa and up to 5400 K. With our results and a compilation of literature data, we developed a parameterization for partitioning that accounts for compositional dependencies in both the metal and silicate phases. Using this parameterization in a range of planetary growth models, we find that, in general, lithophile element partitioning into the metallic phase is enhanced at high temperatures. The relative abundances of FeO, SiO 2 , and MgO in the mantle vary significantly between planetary growth models, and the mantle abundances of these elements can be used to provide important constraints on Earth's accretion. To match Earth's core mass and mantle composition, Earth's building blocks must have been enriched in Fe and depleted in Si compared with CI chondrites. Finally, too little Mg, Si, and O are partitioned into the core for precipitation of oxides to be a major source of energy for the geodynamo. In contrast, several ppb of U can be partitioned into the core at high temperatures, and this energy source must be accounted for in thermal evolution models.

Chidester, B. A.↗

THE BOSS EMISSION-LINE LENS SURVEY. II. INVESTIGATING MASS-DENSITY PROFILE EVOLUTION IN THE SLACS+BELLS STRONG GRAVITATIONAL LENS SAMPLE

We present an analysis of the evolution of the central mass-density profile of massive elliptical galaxies from the SLACS and BELLS strong gravitational lens samples over the redshift interval z Almost-Equal-To 0.1-0.6, based on the combination of strong-lensing aperture mass and stellar velocity-dispersion constraints. We find a significant trend toward steeper mass profiles (parameterized by the power-law density model with {rho}{proportional_to}r {sup -{gamma}}) at later cosmic times, with magnitude d < {gamma} > /dz = -0.60 {+-} 0.15. We show that the combined lens-galaxy sample is consistent with a non-evolving distribution of stellar velocity dispersions. Considering possible additional dependence of <{gamma} > on lens-galaxy stellar mass, effective radius, and Sersic index, we find marginal evidence for shallower mass profiles at higher masses and larger sizes, but with a significance that is subdominant to the redshift dependence. Using the results of published Monte Carlo simulations of spectroscopic lens surveys, we verify that our mass-profile evolution result cannot be explained by lensing selection biases as a function of redshift. Interpreted as a true evolutionary signal, our result suggests that major dry mergers involving off-axis trajectories play a significant role in the evolution of the average mass-density structure of massive early-type galaxies over the past 6 Gyr. We also consider an alternative non-evolutionary hypothesis based on variations in the strong-lensing measurement aperture with redshift, which would imply the detection of an 'inflection zone' marking the transition between the baryon-dominated and dark-matter halo-dominated regions of the lens galaxies. Further observations of the combined SLACS+BELLS sample can constrain this picture more precisely, and enable a more detailed investigation of the multivariate dependences of galaxy mass structure across cosmic time.

79 ASTRONOMY AND ASTROPHYSICS↗

USING STAR SPOTS TO MEASURE THE SPIN-ORBIT ALIGNMENT OF TRANSITING PLANETS

Spectroscopic follow-up of dozens of transiting planets has revealed the degree of alignment between the equators of stars and the orbits of the planets they host. Here we determine a method, applicable to spotted stars, that can reveal the same information from the photometric discovery data, with no need for follow-up. A spot model fit to the global light curve, parameterized by the spin orientation of the star, predicts when the planet will transit the spots. Observing several spot crossings during different transits then leads to constraints on the spin-orbit alignment. In cases where stellar spots are small, the stellar inclination, i{sub s} , and hence the true alignment, rather than just the sky projection, can be obtained. This method has become possible with the advent of space telescopes such as CoRoT and Kepler, which photometrically monitor transiting planets over a nearly continuous, long time baseline. We apply our method to CoRoT-2 and find the projected spin-orbit alignment angle, {lambda} = 4.{sup 0}7 {+-} 12.{sup 0}3, in excellent agreement with a previous determination that employed the Rossiter-McLaughlin effect. The large spots of the parent star, CoRoT-2, limit our precision on i{sub s} : 84{sup 0} {+-} 36{sup 0}, where i{sub s} < 90{sup 0}(> 90{sup 0}) indicates that the rotation axis is tilted toward (away from) the line of sight.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved Madden–Julian Oscillations with Improved Physics: The Impact of Modified Convection Parameterizations

Two modifications are made to the deep convection parameterization in the NCAR Community Climate System Model, version 3 (CCSM3): a dilute plume approximation and an implementation of the convective momentum transport (CMT). These changes lead to significant improvement in the simulated Madden–Julian oscillations (MJOs). With the dilute plume approximation, temperature and convective heating perturbations become more positively correlated. Consequently, more available potential energy is generated and the intraseasonal variability (ISV) becomes stronger. The organization of ISV is also improved, which is manifest in coherent structures between different MJO phases and an improved simulation of the eastward propagation of MJOs with a reasonable eastward speed. The improved propagation can be attributed to a better simulation of the low-level zonal winds due to the inclusion of CMT. The authors posit that the large-scale zonal winds are akin to a selective conveyor belt that facilitates the organization of ISVs into highly coherent structures, which are important features of observed MJOs. The conclusions are supported by two supplementary experiments, which include the dilute plume approximation and CMT separately.

54 ENVIRONMENTAL SCIENCES↗

Thermal chains and entrainment in cumulus updrafts, Part 2: Analysis of idealized simulations

Research has suggested that the structure of deep convection often consists of a series of rising thermals, or “thermal chain”, which contrasts with existing conceptual models that are used to construct cumulus parameterizations. In this work, simplified theoretical expressions for updraft properties obtained in Part 1 of this study are used to develop a hypothesis explaining why this structure occurs. In this hypothesis, cumulus updraft structure is strongly influenced by organized entrainment below the updraft’s vertical velocity maximum. In a dry environment, this enhanced entrainment can locally reduce condensation rates and increase evaporation, thus eroding buoyancy. For moderate-to-large initial cloud radius R, this breaks up the updraft into a succession of discrete pulses of rising motion (i.e., a thermal chain). For small R, this leads to the structure of a single, isolated rising thermal. In contrast, moist environments are hypothesized to favor plume-like updrafts for moderate-to-large R. In a series of axisymmetric numerical cloud simulations, R and environmental relative humidity (RH) are systematically varied to test this hypothesis. Vertical profiles of fractional entrainment rate, passive tracer concentration, buoyancy, and vertical velocity from these runs agree well with vertical profiles calculated from the theoretical expressions in Part 1. Analysis of the simulations supports the hypothesized dependency of updraft structure on R and RH, that is, whether it consists of an isolated thermal, a thermal chain, or a plume, and the role of organized entrainment in driving this dependency. Additional 3-dimensional (3-D) turbulent cloud simulations are analyzed, and the behavior of these 3-D runs is qualitatively consistent with the theoretical expressions and axisymmetric simulations.

54 ENVIRONMENTAL SCIENCES↗

The Strong Impact of Weak Horizontal Convergence on Continental Shallow Convection

Idealized large-eddy simulation (LES) is a basic tool for studying three-dimensional turbulence in the planetary boundary layer. LES is capable of providing benchmark solutions for parameterization development efforts. However, real small-scale atmospheric flows develop in heterogeneous and transient environments with locally varying vertical motions inherent to open multiscale interactive dynamical systems. These variations are often too subtle to detect them by state-of-the-art remote and in situ measurements, and are typically excluded from idealized simulations. The present study addresses the impact of weak [i.e., O(10-6) s-1] short-lived low-level large-scale convergence/divergence perturbations on continental shallow convection. The results show a strong response of shallow nonprecipitating convection to the applied weak large-scale dynamical forcing. Evolutions of CAPE, mean liquid water path, and cloud-top heights are significantly affected by the imposed convergence/divergence. In contrast, evolving cloud-base properties, such as the area coverage and mass flux, are only weakly affected. To contrast those impacts with microphysical sensitivity, the baseline simulations are perturbed assuming different observationally based cloud droplet number concentrations and thus different rainfall. For the tested range of microphysical perturbations, the imposed convergence/divergence provides significantly larger impact than changes in the cloud microphysics. Simulation results presented here provide a stringent test for convection parameterizations, especially important for large-scale models progressing toward resolving some nonhydrostatic effects.

Meteorology & Atmospheric Sciences↗