Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geophysical data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Arctic sea ice microwave signature and geophysical processes study

Studies on the validation and utilization of ERS-1 SAR (Synthetic Aperture Radar) derived liquid and solid ocean information and the study of the interregional, regional, and temporal variation of the microwave signatures of sea ice and snow, are reported. Initial interests are focused on the accuracy of the estimates of ice type, ice form, deformation state, or thickness, and the ability to retrieve ice physical property information. Two in situ campaigns were conducted for the purpose of 'truth' ERS-1 SAR products and to gather data in support of the above science studies.

Onstott, Robert G.↗

Integrated Approach to Investigating Historic Cemeteries

Ground-penetrating radar (GPR) and terrestrial laser scanning (TLS) surveys were conducted at a historic cemetery at Cape Canaveral Air Force Station, Florida, U.S., in order to confirm the presence of burials corresponding to grave markers and detect potential unmarked burials. Noise in the GPR data from surface features and subtle terrain differences must be addressed to determine the extent of anomalies of interest. We use singular value decomposition (SVD) to isolate and remove energy from GPR data. SVD allows one to remove unwanted signals that traditional processing techniques cannot. With SVD filtering, we resolve an anomaly adjacent to confirmed burials otherwise overprinted by unwanted signal. The migration of SVD-filtered data produces more distinct, spatially constrained point reflectors. Ground elevation is derived from georeferenced TLS data and compared to that from airborne laser scanning (ALS) to highlight subtle terrain that can assist data interpretation. TLS elevations show a subtle modern mound over the burial plot where ALS elevations show a depression. The targets of interest are approximately 20–30 cm higher in elevation if a topographic correction is performed using TLS versus ALS. In archaeological applications, a notable change is often recorded at the sub-meter scale. The combined approach presented here better resolves geophysical response of buried features and their positions in the ground relative to each other.

Downs, Christine (ORCID:0000000237229381)↗

An algorithm for retrieval of ocean surface and atmospheric parameters from the observations of the scanning multichannel microwave radiometer (SMMR)

A formalism was developed which can be used to interpret the data in terms of sea surface temperature, sea surface wind speed, and the atmospheric overburden of water vapor and liquid water. It was shown with reasonable instrumental performance assumptions, these parameters could be derived to useful accuracies. Although the algorithms were not derived for use in rain, it is shown that, at least, token rain rates can be tolerated without invalidating the retrieved geophysical parameters.

Wilheit, T. T.↗

Assessing the capability of EOS sensors in measuring ocean-atmosphere moisture exchange

As part of the Science Synergism Studies to identify interdisciplinary Scientific studies, which could be addressed by the Environmental Observing System (EOS), the techniques being developed to measure ocean-atmosphere moisture exchanges using satellite sensors were evaluated. Studies required to use sensors proposed for EOS were examined. A method has been developed to compute the moisture flux using the wind speed, sea surface temperature, and preciptable water measured by satellite sensors. It relies on a statistical model which predicts surface-level humidity from precipitable water. The Scanning Multichannel Microwave Radiometer (SMMR) measures all 3 parameters and was found to be sensitive to the annual cycle and large interannual variations such as the 1982 to 1983 El Nino. There are systematic differences between geophysical parameters measured by Nimbus/SMMR and in situ measurements. After quadratic trends and crosstalks were removed from the parameters through multivariate regressions, the latent heat fluxes computed from SMMR agree with those computed from ship reports to within 30 W/sq m. The poor quality of ship reports may be the cause of a portion of this scatter. Similar results are found using SEASAT/SMMR data. When the scatterometer winds were used instead of the SMMR winds, the difference between the satellite fluxes and the ship fluxes was reduced.

Liu, W. T.↗

Evidence for variations in magma production along oceanic spreading centers - A critical appraisal

Recent geologic, geophysical, and geochemical studies of the oceanic lithosphere near fracture zones have resulted in the proposal that the 'magma budget,' defined as the amount of magma delivered to magma chambers or conduits beneath a spreading center for a given amount of spreading, decreases as fracture zones are approached. Seismic reflection and refraction studies indicate that the crust becomes anomalously thin near fracture zones, but reference must be made to the boundary between residual upper mantle peridotites and overlying cumulate rocks in order to assess potential variations in the magma budget. The position of this interface, however, generally is not constrained by geophysical studies. Geochemical variations in basaltic glasses collected near fracture zones are consistent with a decrease in partial melting as fracture zones are approached, but they could also be produced by variations in open-system magmatic processes with no change in the extent of partial melting. Although a decrease in the magma budget as fracture zones are approached is consistent with these data, so are alternative models that incorporate a constant magma budget.

Karson, J. A.↗

Evaluation of the OMI Cloud Pressures Derived from Rotational Raman Scattering by Comparisons with other Satellite Data and Radiative Transfer Simulations

In this paper we examine differences between cloud pressures retrieved from the Ozone Monitoring Instrument (OMI) using the ultraviolet rotational Raman scattering (RRS) algorithm and those from the thermal infrared (IR) Aqua/MODIS. Several cloud data sets are currently being used in OMI trace gas retrieval algorithms including climatologies based on IR measurements and simultaneous cloud parameters derived from OMI. From a validation perspective, it is important to understand the OMI retrieved cloud parameters and how they differ with those derived from the IR. To this end, we perform radiative transfer calculations to simulate the effects of different geophysical conditions on the OMI RRS cloud pressure retrievals. We also quantify errors related to the use of the Mixed Lambert-Equivalent Reflectivity (MLER) concept as currently implemented of the OMI algorithms. Using properties from the Cloudsat radar and MODIS, we show that radiative transfer calculations support the following: (1) The MLER model is adequate for single-layer optically thick, geometrically thin clouds, but can produce significant errors in estimated cloud pressure for optically thin clouds. (2) In a two-layer cloud, the RRS algorithm may retrieve a cloud pressure that is either between the two cloud decks or even beneath the top of the lower cloud deck because of scattering between the cloud layers; the retrieved pressure depends upon the viewing geometry and the optical depth of the upper cloud deck. (3) Absorbing aerosol in and above a cloud can produce significant errors in the retrieved cloud pressure. (4) The retrieved RRS effective pressure for a deep convective cloud will be significantly higher than the physical cloud top pressure derived with thermal IR.

Vasilkov, Alexander↗

Global plate tectonics and the secular motion of the pole

Astronomical data compiled during the last 70 years by the international organizations providing the coordinates of the instantaneous pole clearly shows a persistent drift of the mean pole. The differential contributions to the earth's second-order tensor of inertia were obtained and applied, resulting in no significant displacement of the earth's principal axis. In view of the above, the effect that theoretical geophysical models for absolute plate velocities may have on an apparent displacement of the mean pole as a consequence of station drifting was analyzed. The investigation also reports new values for the crustal tensor of inertia (assuming an ellipsoidal earth) and the orientation of its axis of figure, reopening the old speculation of a possible sliding of the whole crustover the upper mantle, including the supporting geophysical and astronomic evidence.

Soler, T.↗

An algorithm for retrieval of ocean surface and atmospheric parameters from the observations of the scanning multichannel microwave radiometer

The scanning multichannel microwave radiometer is a five-frequency (6.6, 10.7, 18, 21, and 37 GHz), dual-polarized microwave radiometer, which was launched in two separate satellites, Nimbus 7 and Seasat, in 1978. A formalism is developed which can be used to interpret the data in terms of sea surface temperature, sea surface wind speed, and the atmospheric content of water vapor and liquid water. It is shown with reasonable instrumental performance assumptions that these parameters can be derived to useful accuracies. Although the algorithms are not derived for use in rain, it is shown that at least token rain rates can be tolerated without invalidating the retrieved geophysical parameters.

Wilheit, T. T.↗

The Magsat scalar magnetometer

The Magsat scalar magnetometer is derived from optical pumping magnetometers flown on the orbiting geophysical observatories. The basic sensor, a cross-coupled arrangement of absorption cells, photodiodes, and amplifiers, oscillates at the Larmor frequency of atomic moments precessing about the ambient field direction. The Larmor frequency output is accumulated digitally and stored for transfer to the spacecraft telemetry stream. In orbit the instrument has met its principal objective of calibrating the vector magnetometer and providing scalar field data.

Farthing, W. H.↗

Lava flooding of ancient planetary crusts - Geometry, thickness, and volumes of flooded lunar impact basins

The present study is concerned with the determination of the geometry, thickness, volumes, and style of emplacement of lava extruded onto an ancient planetary crust, giving particular attention to crustal regions characterized by the topography of impact basins. Attempts to establish thicknesses and volumes are based on four approaches, related to crater morphometry, crater penetration, stratigraphy, and geophysical techniques. The considered technique is applied to two areas related to lunar impact areas. The Orientale basin is investigated, taking into account the style of flooding, the geometry of deposits and implications for loading of the lithosphere, and aspects of lava thickness and vertical mixing. An analysis of the Archimedes-Apennine Bench region is also conducted, giving attention to the number of data points, rim heights of fresh lunar craters, and the premare nature of impact crater data points.

Head, J. W.↗

Proceedings of the Polar Processes on Mars Workshop

Included in this publication is a collection of abstracts from the NASA-sponsored workshop, Polar Processes on Mars, which was held at the Sunnyvale Hilton Hotel, Sunnyvale, California, on 12 to 13 May 1988. Support for the workshop came from NASA's Planetary Geology and Geophysics program managed by Dr. Jospeh Boyce. The workshop is one of a series identified by MECA (an acronym for Mars: Evolution of its Climate and Atmosphere) as being worthy of focused research, but one for which it was not possible to hold during the project's lifetime. Consequently, it was held after the project ended. The MECA project was part of the Mars Data Analysis program. The workshop consisted of four sessions: The Polar Caps, Dynamics/Atmospheric Processes, Polar Geology, and Future Measurements. To put things into perspective, each of the first three sessions began with a review. All sessions were scheduled to allow ample time for discussion. A brief review of each session is provided.

Haberle, Robert M.↗

Confidence set inference with a prior quadratic bound

In the uniqueness part of a geophysical inverse problem, the observer wants to predict all likely values of P unknown numerical properties z=(z sub 1,...,z sub p) of the earth from measurement of D other numerical properties y (sup 0) = (y (sub 1) (sup 0), ..., y (sub D (sup 0)), using full or partial knowledge of the statistical distribution of the random errors in y (sup 0). The data space Y containing y(sup 0) is D-dimensional, so when the model space X is infinite-dimensional the linear uniqueness problem usually is insoluble without prior information about the correct earth model x. If that information is a quadratic bound on x, Bayesian inference (BI) and stochastic inversion (SI) inject spurious structure into x, implied by neither the data nor the quadratic bound. Confidence set inference (CSI) provides an alternative inversion technique free of this objection. Confidence set inference is illustrated in the problem of estimating the geomagnetic field B at the core-mantle boundary (CMB) from components of B measured on or above the earth's surface.

Backus, George E.↗

Ozone measurements from the NOAA-9 and the Nimbus-7 satellites - Implications of short and long term variabilities

An overview of the measurements of total ozone and ozone profiles by the SBUV/2 instrument on the NOAA-9 spacecraft relative to similar measurements from the solar backscatter ultraviolet (SBUV) and TOMS instruments on Nimbus-7 is presented. During the three-year period from March 14, 1985 to February 28, 1988, when these data sets overlap, it is shown that there have been significant changes in the calibrations of the three instruments that may be attributed to diffuser plate degradation (for SBUV/TOMS) and to the drift of the NOAA-9 orbit to later equator crossing times (for SBUV/2). Though these instrument characteristic changes have effected the absolute values of the trends derived from the three instruments, their geophysical characteristics and response to short-term variations are accurate and correlate well among the three instruments. It is seen that the total column ozone measured by the three instruments shows good agreement with respect to its day-to-day, seasonal, and latitudinal variabilities.

Chandra, S.↗

Effects on post-glacial rebound from the hard rheology in the transition zone

The effect of an increase of viscosity in the earth-mantle's transition zone between 420 and 670 km on the geophysical signatures induced by postglacial rebound was analyzed using a self-gravitating model consisting of an elastic lithosphere, a three-layer viscoelastic mantle, and an inviscid core. Results show that the horizontal displacements and velocities as well as the stress pattern are extremely sensitive to the viscosity increase and to the chemical stratification of the transition zone. The findings indicate that geodetic data on intraplate deformation can be used to put constraints on the viscosity increase in the transition zone and on the amount of chemical stratification in the mantle.

Spada, Giorgio↗

Mission Planning for Trident: Discovery proposal to Neptune’s moon, Triton

Trident was one of the four Discovery-class Step-1 mission proposals selected by NASA in 2020 for further development and study; however, in 2021, the Step-2 proposal was not down-selected to transition into the next phase of mission development, i.e., a mission for flight.Neptune’s largest moon, Triton, was the primary focus of study for Trident. Triton’s physical and orbital characteristics make it a unique planetary target for scientific exploration, providing opportunities for investigations in a wide variety of scientific fields, including geomorphological, atmospheric, geophysical, magnetospheric, and ionospheric studies. The science objectives of the Trident mission encompassed an in-depth interior-to-exterior set of objectives, focused on multiple outstanding questions resulting from the 1989 encounter of Voyager 2, and subsequent analysis.Ball Aerospace Corp. was tasked with building the Trident spacecraft, with JPL responsible for providing Engineering Support (Mission Design & Navigation, Mission Planning, Flight Operations, Ground Data Systems, Systems Engineering) and leading Project Management. The observatory would carry a wide-ranging suite of scientific instruments onboard, including an Infrared Spectrometer (IRS) and Narrow Angle Camera (NAC) to be provided by Ball Aerospace Corp., a Wide Angle Camera (WAC) from JPL, a Magnetometer from UCLA, a contributed Plasma Science Suite from IRF (Sweden), and a contributed Radio Science instrument from ASI (Italy). All of these instruments would be used to collect unique datasets during the Triton encounter. Trident would have taken advantage of an ~13-yr, nearly-ballistic trajectory to Triton, utilizing a timely Jupiter Gravity Assist, to execute a 10-day long encounter in the Neptunian system. Launch was planned for October 2025, with Triton arrival scheduled for December 2038. The timeline for this mission would have been sub-divided into seven major phases: Launch, Commissioning, Inner Planet Cruise, Outer Planet Cruise, Approach, Encounter, and Science Data Return. Multiple planetary flybys were planned to be performed during the cruise, including three Earth flybys and one Venus flyby in the Inner Planet Cruise phase, and one Jupiter flyby in the Outer Planet Cruise phase. Along with conventional (Range and Doppler) tracking data, Delta-DOR and Optical Navigation data were also to be acquired to assist with spacecraft navigation during the Approach and Encounter phases. A 3 meter X-Band High Gain Antenna would allow playback of all science data at 1 kbps within 1 year after the Triton Encounter. The Mission Planning element on Trident encompassed and informed multiple aspects of this proposal, ranging from science observation planning during the Triton Encounter phase, to generation of activity timelines for all mission phases; performing ground coverage analysis for science observations to be acquired by all instruments and tracing them to science requirements; evaluation of spacecraft resources including data volume stored onboard, power/energy consumption, telecom (commanding/telemetry) requirements, and overall, working at the interface of science and engineering teams on the mission. All of these functions that were performed by the Mission Planning team on this proposal are discussed in this paper.

Prockter, Louise↗

Geophysical fluid flow experiment

The essential fluid flow processes associated with the solar and Jovian atmospheres will be examined in a laboratory experiment scheduled for performance on Spacelab Missions One and Three. The experimental instrumentation required to generate and to record convective fluid flow is described. Details of the optical system configuration, the lens design, and the optical coatings are described. Measurement of thermal gradient fields by schlieren techniques and measurement of fluid flow velocity fields by photochromic dye tracers is achieved with a common optical system which utilizes photographic film for data recording. Generation of the photochromic dye tracers is described, and data annotation of experimental parameters on the film record is discussed.

Broome, B. G.↗

Synergistic relationships among remote-sensing and geophysical media: Geological and hydrological applications

The synergistic relationships among LANDSAT imagery, Skylab photographs, and aerial photographs were useful for establishing areas of near surface bedrock. Lineaments were located on LANDSAT imagery and aerial photographs during 1978 and near surface water tables were to be located during 1980. Both of these subjects can be identified by remote sensing methods more reliably than individual outcrops, which are small and occur in a wide variety of environments with a wide range of responses. Bedrock outcrops themselves could not be resolved by any of the data sources used, nor did any combination of data sources specifically identify rock at the ground surface. The data sources could not simply be combined mathematically to produce a visual image of probable areas of near surface bedrock. Outcrops and near surface bedrock had to be verified visually at the site. Despite these drawbacks, a procedure for locating areas of near surface bedrock within which actual surface outcrops may occur was developed.

Goebel, J. E.↗

Detailed space–time variations of the seismic response of the shallow crust to small earthquakes from analysis of dense array data

SUMMARY We compute high-resolution space–time variations of subsurface seismic properties from autocorrelation functions (ACF’s) of noise and local earthquakes, recorded by the Sage Brush Flat dense array deployed around the Clark branch of the San Jacinto fault. The resolved temporal changes are referred to as apparent velocity changes because they reflect both nonlinear response and variations of material properties such as cracking and damage. Apparent velocity changes are estimated at four frequency bands (10–15, 10–20, 15–30 and 20–40 Hz) for two local earthquake data sets. In one analysis, ACF’s from P- and S-wave windows of 31 small events with magnitudes below 3.1 are used to compute the apparent velocity variations with respect to the mean ACF of each phase, and we also use the mean ACF of noise data as reference to estimate the changes. In a further analysis, the temporal evolution of properties is computed using moving time windows in continuous waveform over one-hour long data with noise and earthquake signals. The apparent velocity changes and recovery times are frequency dependent and present a strong spatial variability across the array. The resolved changes are larger and recovery time shorter with data associated with higher frequencies. At frequencies larger than 15 Hz, and using the mean ACF of noise data as a reference, the apparent average velocity changes across the array during the passage of the P and S waves from the small local events are 2.5 per cent and 6 per cent, respectively. The apparent velocity changes decrease by one order of magnitude when the earthquake data are used as a reference. The relatively large changes in response to very low ground motion have important implications on nonlinear processes involving degradation and healing of the subsurface material during common earthquake shaking.

Geochemistry & Geophysics↗