Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flight computer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Establishing a measurement based maintenance improvement program - Lessons learned in the SEL

The Software Engineering Laboratory (SEL) is a joint venture between NASA's Goddard Space Flight Center, the University of Maryland, and Computer Sciences Corporation. The use of a goal-oriented approach to measurement to establish a maintenance improvement program within the SEL is discussed. Differences are found to exist between the initial phase of the program and its routine application. This approach is demonstrated through concrete examples, and lessons learned in the establishment of a measurement based, maintenance improvement program are summarized.

Rombach, H. Dieter↗
NASA NTRS1990

Application of vortex embedding to aircraft flows

A combined Eulerian/Lagrangian 'vortex embedding' method was applied to two cases. The first case involved compressible flow over a realistic fighter aircraft (X-29 fighter) at low angle of attack, for both subsonic and transonic speeds, with shock. Good agreement was obtained for computed wing surface pressures when compared to flight test data. The second case involved incompressible flow over a delta wing with round leading edges at moderate angles of attack. Strong, concentrated vortices were shown to be shed from the leading edge. The vortex embedding method appears to be an efficient solution procedure for cases where well-defined vortex sheets are shed from surfaces.

Steinhoff, John↗
NASA NTRS1988

Proceedings of the Thirteenth Annual Software Engineering Workshop

Topics covered in the workshop included studies and experiments conducted in the Software Engineering Laboratory (SEL), a cooperative effort of NASA Goddard Space Flight Center, the University of Maryland, and Computer Sciences Corporation; software models; software products; and software tools.

Source record↗
NASA NTRS1989

Numerical simulation of F-18 fuselage forebody flows at high angles of attack

Fine-grid Navier-Stokes solutions were obtained for flow over the fuselage forebody and wing leading edge extension of the F/A-18 High Alpha Research Vehicle at large incidence. The resulting flows are complex, and exhibit cross flow separation from the sides of the forebody and from the leading edge extension. A well-defined vortex pattern is observed in the leeward-side flow. Results obtained for laminar flow show good agreement with flow visualizations obtained in ground-based experiments. Further, turbulent flows computed at high Reynolds-number flight-test conditions show good agreement with surface and off-surface visualizations obtained in flight.

Schiff, Lewis B.↗
NASA NTRS1991

CFD code validation for nozzle flowfields

Renewed interest in hypersonic airbreathing flight has resulted in heavy reliance on computational fluid dynamics for all aspects of aerodynamic and scramjet component modeling. Credible numerical performance predictions require calibration to unit type flowfields. This paper presents results of one such calibration to nonreacting simulated scramjet nozzle flowfields. The experimental test program was performed on a static thrust stand. Computed results are in excellent agreement with measured wall pressure, pitot pressure profiles, and thrust. Agreement with thrust is shown to be within the reported accuracy of the experimental measurements.

Jentink, Thomas N.↗
NASA NTRS1991

Research and technology, 1991

NASA Lewis' research and technology accomplishments are summarized for the fiscal year 1991. Approximately 150 articles are presented which were submitted by the technical directorates. There are six major sections: Aeronautics; Aerospace technology; Space flight systems; Space Station Freedom; Engineering and Computational support; and Lewis Research Academy. A table of contents by subject was developed to assist the reader in finding articles of special interest. For each article, a Lewis contact person is identified, and where possible, a reference document is listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible.

Source record↗
NASA NTRS1991

Dynamics modeling for ERBS attitude propagation

The development and evaluation of a model of the Earth Radiation Budget Satellite (ERBS) attitude dynamics for use in attitude determination is described. Attitude rates for the three axis stabilized spacecraft are derived analytically from Euler's equation using modeled disturbance torques and telemetered flight data from control system actuators for computation of the control torques. The modeled rates are used for attitude propagation in a batch least squares attitude estimation algorithm originally designed to use onboard gyro measurements of attitude motion. The capabilities for near fine attitude determination without gyros is important for operational attitude ground support of the aging ERBS spacecraft as two out of three gyro axes have failed. The accuracy of this method of dynamic propagation is strongly dependent on the quality and availability of control system telemetry data. Detailed disturbance torque models are also necessary to accurately model attitude rates. Even with the relatively coarse ERBS control system telemetry, accuracy to within 0.2 deg of gyro propagated reference attitudes is achieved.

Harvie, E.↗
NASA NTRS1992

Application of space-marching methods to hypersonic forebody flow fields

The heavy reliance on CFD in the design of hypersonic flight vehicles emphasizes the importance of choosing computationally efficient techniques. As a result, the development and application of space-marching flow solvers for the parabolized Navier-Stokes equations have received considerable attention in the past decade. This paper summarizes a space-marching approach used at NASA Ames Research Center for the analysis of hypersonic vehicle forebodies. Aspects of the simulation process are addressed that contain features unique to space-marching flow solvers, such as grid generation, initial condition specification, and finite-rate chemistry models. For completeness, sections are also included on turbulence modeling and equilibrium air chemistry modeling. The discussion includes an overview of the computational methods utilized as well as a number of relevant results.

Lawrence, Scott L.↗
NASA NTRS1946

Consideration of dynamic loads on the vertical tail by the theory of flat yawing maneuvers

Dynamic yawing effects on vertical tail loads are considered by a theory of flat yawing maneuvers. A comparison is shown between computed loads and the loads measured in flight in a fighter airplane. The dynamic effects were investigated on a large flying boat for both an abrupt rudder deflection and a sinusoidal rudder deflection. Only a moderate amount of control deflection was found to be necessary to attain the ultimate design load on the tail. In order to take into account dynamic effects in design, specifications of yawing maneuverability or control movement are needed.

Boshar, John↗
NASA NTRS1946

Consideration of dynamic loads on the vertical tail by the theory of flat yawing maneuvers

Dynamic yawing effects on vertical-tail loads are considered by a theory of flat yawing maneuvers. A comparison is shown between computed loads and the loads measured in flight on a fighter airplane. The dynamic effects were investigated on a large flying boat for both an abrupt rudder deflection and sinusoidal rudder deflection. Only a moderate amount of control deflection was found to be necessary to attain the ultimate design load on the tail. In order to take into account dynamic effects in design, specifications of yawing maneuverability or control movement are needed.

Boshar, John↗
NASA NTRS1993

Computing in space: Issues and answers

Future plans for space exploration call for scientific instruments whose data is increasingly voluminous, far exceeding constraints set by telemetry rates, and therefore, an increased role for spaceborne computing. Three issues that greatly influence the realization of spaceborne computing systems are addressed. The first involves the identification of those research problems which are unique to space computing. Resources must be expended on these problems if efforts are to add value to, and have impact on, the technology of computing in space. The second addresses the transfer of new technology from the research laboratory to use in space. What can be done to expedite this process and shrink the technology gap that separates Earth and space based systems must be assessed. The third issue involves the user's point of view of what is required of new space computing systems. That is, what are the driving forces that most influence customers' decisions to use or not use new technology? Issues of design environment for spaceborne computers, tools for modeling and evaluation of flight systems, and validation of space flight hardware and software are also discussed.

Davidson, John M.↗
NASA NTRS1994

SCOSII OL: A dedicated language for mission operations

The Spacecraft Control and Operations System 2 (SCOSII) is the new generation of Mission Control Systems (MCS) to be used at ESOC. The system is generic because it offers a collection of standard functions configured through a database upon which a dedicated MCS is established for a given mission. An integral component of SCOSII is the support of a dedicated Operations Language (OL). The spacecraft operation engineers edit, test, validate, and install OL scripts as part of the configuration of the system with, e.g., expressions for computing derived parameters and procedures for performing flight operations, all without involvement of software support engineers. A layered approach has been adopted for the implementation centered around the explicit representation of a data model. The data model is object-oriented defining the structure of the objects in terms of attributes (data) and services (functions) which can be accessed by the OL. SCOSII supports the creation of a mission model. System elements as, e.g., a gyro are explicit, as are the attributes which described them and the services they provide. The data model driven approach makes it possible to take immediate advantage of this higher-level of abstraction, without requiring expansion of the language. This article describes the background and context leading to the OL, concepts, language facilities, implementation, status and conclusions found so far.

Baldi, Andrea↗
NASA NTRS1995

Gravity wave momentum flux in the lower stratosphere over convection

This work describes a method for estimating vertical fluxes of horizontal momentum carried by short horizontal scale gravity waves (lambda(sub x) = 10-100 km) using aircraft measured winds in the lower stratosphere. We utilize in situ wind vector and pressure altitude measurements provided by the Meteorological Measurement System (MMS) on board the ER-2 aircraft to compute the momentum flux vectors at the flight level above deep convection during the tropical experiment of the Stratosphere Troposphere Exchange Project (STEP-Tropical). Data from Flight 9 are presented here for illustration. The vertical flux of horizontal momentum these observations points in opposite directions on either side of the location of a strong convective updraft in the cloud shield. This property of internal gravity waves propagating from a central source compares favorably with previously described model results.

Alexander, M. Joan↗
NASA NTRS1994

Theoretical study of the effect of an AlGaAs double heterostructure on metal-semiconductor-metal photodetector performance

The sizing and efficiency of an aircraft is largely determined by the performance of its high-lift system. Subsonic civil transports most often use deployable multi-element airfoils to achieve the maximum-lift requirements for landing, as well as the high lift-to-drag ratios for take-off. However, these systems produce very complex flow fields which are not fully understood by the scientific community. In order to compete in today's market place, aircraft manufacturers will have to design better high-lift systems. Therefore, a more thorough understanding of the flows associated with these systems is desired. Flight and wind-tunnel experiments have been conducted on NASA Langley's B737-100 research aircraft to obtain detailed full-scale flow measurements on a multi-element high-lift system at various flight conditions. As part of this effort, computational aerodynamic tools are being used to provide preliminary flow-field information for instrumentation development, and to provide additional insight during the data analysis and interpretation process. The purpose of this paper is to demonstrate the ability and usefulness of a three-dimensional low-order potentialflow solver, PMARC, by comparing computational results with data obtained from 1/8 scale wind-tunnel tests. Overall, correlation of experimental and computational data reveals that the panel method is able to predict reasonably well the pressures of the aircraft's multi-element wing at several spanwise stations. PMARC's versatility and usefulness is also demonstrated by accurately predicting inviscid threedimensional flow features for several intricate geometrical regions.

Salem, Ali F.↗
NASA NTRS1995

Three-dimensional aerodynamic analysis of a subsonic transport high-lift configuration and comparisons with wind-tunnel test results

The sizing and efficiency of an aircraft is largely determined by the performance of its high-lift system. Subsonic civil transports most often use deployable multi-element airfoils to achieve the maximum-lift requirements for landing, as well as the high lift-to-drag ratios for take-off. However, these systems produce very complex flow fields which are not fully understood by the scientific community. In order to compete in today's market place, aircraft manufacturers will have to design better high-lift systems. Therefore, a more thorough understanding of the flows associated with these systems is desired. Flight and wind-tunnel experiments have been conducted on NASA Langley's B737-100 research aircraft to obtain detailed full-scale flow measurements on a multi-element high-lift system at various flight conditions. As part of this effort, computational aerodynamic tools are being used to provide preliminary flow-field information for instrumentation development, and to provide additional insight during the data analysis and interpretation process. The purpose of this paper is to demonstrate the ability and usefulness of a three-dimensional low-order potential flow solver, PMARC, by comparing computational results with data obtained from 1/8 scale wind-tunnel tests. Overall, correlation of experimental and computational data reveals that the panel method is able to predict reasonably well the pressures of the aircraft's multi-element wing at several spanwise stations. PMARC's versatility and usefulness is also demonstrated by accurately predicting inviscid three-dimensional flow features for several intricate geometrical regions.

Edge, D. Christian↗
NASA NTRS1998

Delta Clipper-Experimental In-Ground Effect on Base-Heating Environment

A quasitransient in-ground effect method is developed to study the effect of vertical landing on a launch vehicle base-heating environment. This computational methodology is based on a three-dimensional, pressure-based, viscous flow, chemically reacting, computational fluid dynamics formulation. Important in-ground base-flow physics such as the fountain-jet formation, plume growth, air entrainment, and plume afterburning are captured with the present methodology. Convective and radiative base-heat fluxes are computed for comparison with those of a flight test. The influence of the laminar Prandtl number on the convective heat flux is included in this study. A radiative direction-dependency test is conducted using both the discrete ordinate and finite volume methods. Treatment of the plume afterburning is found to be very important for accurate prediction of the base-heat fluxes. Convective and radiative base-heat fluxes predicted by the model using a finite rate chemistry option compared reasonably well with flight-test data.

Wang, Ten-See↗
NASA NTRS1999

Numerical Prediction of Transient Axial Thrust and Internal Flows in a Rocket Engine Turbopump

This paper presents the application of the Generalized Fluid System Simulation Program (GFSSP) to model the time-dependent flow in a complex secondary flow circuit of the turbopump of the Fastrac engine currently under development at Marshall Space Flight Center. GFSSP is a general purpose computer program for analyzing steady-state and time-dependant flowrates, pressures, temperatures, and concentrations in a complex flow network. The program employs a finite volume formulation of mass, momentum and energy conservation equations in conjunction with the thermodynamic equation of state of real fluids. GFSSP was used to calculate the axial thrust and internal flow distribution of the Fastrac engine turbopump during the start and shut down transients. The models discussed in this paper use boundary conditions that were extracted from turbopump test data. The GFSSP predicted turbopump secondary flow passage pressures and temperatures were compared with actual measured values.

VanHooser, Katherine↗
NASA NTRS1998

Particle Engulfment and Pushing by Solidifying Interfaces LMS Mission Results

Results of the directional solidification experiments on Particle Engulfment and Pushing by Solidifying Interfaces (PEP) conducted on the space shuttle Columbia are reported. The experiment was manifested as part of The Life and Microgravity Science Mission. Two pure aluminum (99.999%) 9 mm cylindrical rods, loaded with about 2 vol.% 500 microns diameter zirconia particles were melted and directionally solidified in the microgravity (micro-g) environment of the shuttle. The particles were non-reactive with the matrices within the temperature range of interest. The experiments were conducted such as to insure a planar solid/liquid interface during solidification. Two different cartridge - crucible - sample designs were used: a spring-piston and expansion void. Both resulted in sound samples. Samples were evaluated post-flight for soundness by X-ray computer tomography (XCT).

Juretzko, Frank R.↗