Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Doping effects on thermoelectric properties of the off-stoichiometric Heusler compounds Fe{sub 2−x}V{sub 1+x}Al

The thermoelectric properties of Heusler-type Fe{sub 2−x}V{sub 1+x}Al{sub 1−y}Si{sub y} and Fe{sub 2−x}V{sub 1+x−y}Ti{sub y}Al alloys have been investigated to clarify which off-stoichiometric alloy, i.e., V-rich (x > 0) or V-poor (x < 0), is more effective in enhancing the Seebeck coefficient when doped by Si and Ti, while retaining a low electrical resistivity. Large Seebeck coefficients of −182 μV/K and 110 μV/K at 300 K are obtained for n-type Fe{sub 1.95}V{sub 1.05}Al{sub 0.97}Si{sub 0.03} and p-type Fe{sub 2.04}V{sub 0.93}Ti{sub 0.03}Al, respectively. When the Seebeck coefficient is plotted as a function of valence electron concentration (VEC), the VEC dependence for the doped off-stoichiometric alloys falls on characteristic curves depending on the off-stoichiometric composition x. It is concluded that a larger Seebeck coefficient with a negative sign can be obtained for the V-rich alloys rather than the V-poor alloys, whilst good p-type materials are always derived from the V-poor alloys. Substantial enhancements in the Seebeck coefficient for the off-stoichiometric alloys could be achieved by a favorable modification in the electronic structure around the Fermi level through the antisite V or Fe defect formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution of electron and proton temperatures in a flaring loop. I - A case of thermal heating of electrons

A temperature difference between electrons and protons produced in a flaring loop was investigated experimentally by adopting a one-fluid, two-temperature model instead of a single-temperature model. Consideration was given to the case in which flare energy is released in the form of heating of electrons located in the top part of the loop. In this case, a large temperature difference appears in the corona in the energy-input phase of the flare. When the material evaporated from the chromosphere fills the corona, the temperature difference in the loop begins to shrink rapidly from below. Eventually, in the loop apex, the proton temperature exceeds the electron temperature mainly due to cooling of the electrons by conduction down the loop and heating of the protons by compression of the ascending material. In the late phase of the flare (about 15 min from the flare onset), the temperature difference becomes less than 2 pct of the mean temperature of electrons and protons at every point in the loop.

Nagai, F.↗

Strong Potential Gradients and Electron Confinement in ZnO Nanoparticle Films: Implications for Charge-Carrier Transport and Photocatalysis

We report that zinc oxide (ZnO) nanomaterials are promising components for chemical and biological sensors and photocatalytic conversion and operate as electron collectors in photovoltaic technologies. Many of these applications involve nanostructures in contact with liquids or exposed to ambient atmosphere. Under these conditions, single-crystal ZnO surfaces are known to form narrow electron accumulation layers with few nanometer spatial penetration into the bulk. A key question is to what extent such pronounced surface potential gradients can develop in the nanophases of ZnO, where they would dominate the catalytic activity by modulating charge-carrier mobility and lifetimes. Here, we follow the temperature-dependent surface electronic structure of nanoporous ZnO with photoemission spectroscopy to reveal a sizable, spatially averaged downward band bending for the hydroxylated state and a conservative upper bound of < 6 nm for the spatial extent of the associated potential gradient. This nanoscale confinement of conduction-band electrons to the nanoparticle film surface is crucial for a microscopic understanding and further optimization of charge transport and photocatalytic function in complex ZnO nanomaterials.

36 MATERIALS SCIENCE↗

Charge-carrier transport mechanisms in composites containing carbon-nanotube inclusions

From the microwave-radiation transmittance and reflectance spectra, the temperature dependence of the complex permittivity of carbon nanotubes, subjected to high-temperature annealing, and composite materials produced on their basis is determined. The electron transport mechanisms in composites with inclusions of unannealed carbon nanotubes and nanotubes subjected to high-temperature annealing are determined. The influence of the annealing temperature on the parameters that are characteristic of these mechanisms and control the temperature dependence of the conductivity of multiwall carbon nanotubes is established.

36 MATERIALS SCIENCE↗

Microtearing Modes in Reversed Field Pinch Plasmas

In the reversed field pinch RFX-mod strong electron temperature gradients develop when the single-helical-axis regime is achieved. Gyrokinetic calculations show that in the region of the strong temperature gradients microtearing instabilities are the dominant turbulent mechanism acting on the ion Larmor radius scale. The quasilinear evaluation of the electron thermal conductivity is in good agreement with the experimental estimates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Layer-by-layer shuttered molecular-beam epitaxial growth of superconducting Sr{sub 1-x}La{sub x}CuO{sub 2} thin films

Superconducting Sr{sub 1-x}La{sub x}CuO{sub 2} thin films have been grown on GdScO{sub 3} substrates by reflection high-energy electron diffraction calibrated layer-by-layer molecular-beam epitaxy. X-ray diffraction analysis has confirmed the infinite layer structure after an in situ vacuum annealing step. In situ photoemission spectroscopy indicates that the vacuum annealing step employed immediately after film growth to achieve superconducting films results in oxygen loss from the films. The superconducting critical temperature depends on the La content x, with the highest value obtained for x{approx}0.10. Resistivity as a function of temperature {rho}(T) curves of optimally doped samples show a T{sup 2} temperature dependence characteristic of a scattering process where electron-electron interactions dominate.

36 MATERIALS SCIENCE↗

Metal-insulator transition in SrTi{sub 1−x}V{sub x}O{sub 3} thin films

Epitaxial SrTi{sub 1−x}V{sub x}O{sub 3} (0 ≤ x ≤ 1) thin films were grown on (001)-oriented (LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.7} (LSAT) substrates using the pulsed electron-beam deposition technique. The transport study revealed a temperature driven metal-insulator transition (MIT) at 95 K for x = 0.67. The films with higher vanadium concentration (x > 0.67) were metallic corresponding to a Fermi liquid system. In the insulating phase (x < 0.67), the resistivity behavior was governed by Mott's variable range hopping mechanism. The possible mechanisms for the induced MIT are discussed, including the effects of electron correlation, lattice distortion, and Anderson localization.

36 MATERIALS SCIENCE↗

Thermoelectric Properties of Cobalt Monosilicide and Its Alloys

Thermoelectric properties of cobalt monosilicide CoSi and (Co{sub 1 –x}M{sub x}Si, M = Fe, Ni) alloys are studied. Alloy compositions with an iron content of up to 10 at % and nickel content of up to 5 at % are examined. The thermoelectric power and electrical resistivity are measured at temperatures in the range 100–800 K. Recent calculations of the band structure of cobalt monosilicide have revealed a number of significant differences from the standard semi-metallic model with the energy overlap of parabolic bands for electrons and holes. This requires the modification of previously employed models to describe the transport properties. The possibility of theoretical description of the experimental temperature and concentration dependences of the thermoelectric power and electrical resistivity with the use of different models for description of the electronic spectrum is analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface waves on the boundary of a conducting medium and their excitation by a relativistic electron beam

Excitation of surface waves by a relativistic electron beam propagating over a conducting cylindrical medium (metal or highly ionized plasma) is investigated theoretically. Dispersion relations describing the linear interaction of surface electromagnetic waves with a monoenergetic electron beam are derived, and the growth rates and spatial amplification factors of excited waves are determined. Condition for the nonlinear trapping of the beam electrons by a surface wave is used to determine the maximum amplitude of the excited wave and the optimal radiator length. The electric field of a surface wave excited by an electron beam is estimated for a particular case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Semiconducting Conjugated Radical Polymer: Ambipolar Redox Activity and Faraday Effect

Investigations of magnetism in electronically coupled polyradicals have largely focused on applications in photonic and magnetic devices, wherein radical polymers were found to possess molecularly tunable and cooperative magnetic properties. Radical polymers with nonconjugated insulating backbones have been intensively investigated previously; however the integration of radical species into conducting polymer backbones is at an early stage. We report herein 1,3-bisdiphenylene-2-phenylallyl (BDPA)-based conjugated radical polymers that display ambipolar redox activities and conductivities. Moreover, these radical polymers were demonstrated to be promising magneto-optic (MO) materials with Faraday rotations wherein the sign is modulated by the radical character and display absolute Verdet constants up to (2.80 ± 0.84) × 10 4 deg T –1 m –1 at 532 nm. These values rival the performance of the present-day commercial inorganic MO materials (e.g., terbium gallium garnet, V = –1.0 × 10 4 deg T –1 m –1 at 532 nm). Lastly, the structure property studies detailed herein reveal the promise of multifunctional conjugated radical polymers as responsive MO materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fano Resonance in CO 2 Reduction Catalyst Functionalized Quantum Dots

Molecular catalyst functionalized semiconductor quantum dots (QDs) are a promising modular platform for developing novel hybrid photocatalysts. The interaction between adsorbed catalyst vibrations and the QD electron intraband absorption can influence the photophysical properties of both the QD and the catalysts and potentially their photocatalysis. In CdSe QDs functionalized by the CO 2 reduction catalyst, Re(CO) 3 (4,4’-bipyridine-COOH)Cl, we observe that the transient Fano resonance signal resulting from coupling of the catalyst CO stretching mode and the QD conduction band electron mid-IR intraband absorption appears on an ultrafast time scale and decays with the electron population, irrespective of the occurrence of photoreduced catalysts. The Fano asymmetry factor increases with an increase in the adsorbed catalyst number and a decrease in QD sizes. The latter can be attributed to an enhanced charge transfer interaction between the more strongly quantum-confined QD conduction band and catalyst LUMO levels. These results provide a more in-depth understanding of interactions in excited QD-catalyst hybrid photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of ferromagnetism in (In{sub 0.9}Fe{sub 0.1}){sub 2}O{sub 3} via F doping of electron carriers

Highlights: • F doping was achieved by a process of low temperature reaction with PVDF. • RTFM was obtained in the F-doped (In{sub 0.9}Fe{sub 0.1}){sub 2}O{sub 3.} • Magnetism and electric resistivity can be controlled by the content of doped F. • The FM can be ascribed to a long range exchange interaction induced by carriers. - Abstract: Ferromagnetism in (In{sub 0.9}Fe{sub 0.1}){sub 2}O{sub 3} was obtained by fluorine (F) doping. The ferromagnetism can be controlled by changing the electron carrier concentration via F doping. With increasing the F concentration, the electron carrier concentration increases, and samples undergo a paramagnetic insulator to ferromagnetic metal transition. For the ferromagnetic samples, the anomalous Hall effect (AHE) was observed. These results indicate that electron carriers play an important role in inducing the ferromagnetism.

36 MATERIALS SCIENCE↗

Nuclear Quantum Effects on the Electronic Structure of Water and Ice

The electronic properties and optical response of ice and water are intricately shaped by their molecular structure, including the quantum mechanical nature of the hydrogen atoms. Despite numerous previous studies, a comprehensive understanding of the nuclear quantum effects (NQEs) on the electronic structure of water and ice at finite temperatures remains elusive. Here, we utilize molecular simulations that harness efficient machine-learning potentials and many-body perturbation theory to assess how NQEs impact the electronic bands of water and hexagonal ice. By comparing path-integral and classical simulations, we find that NQEs lead to a larger renormalization of the fundamental gap of ice, compared to that of water, ultimately yielding similar bandgaps in the two systems, consistent with experimental estimates. Our calculations suggest that the increased quantum mechanical delocalization of protons in ice, relative to water, is a key factor leading to the enhancement of NQEs on the electronic structure of ice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational design of thermoelectric alloys through optimization of transport and dopability

Alloying is a common technique to optimize the functional properties of materials for thermoelectrics, photovoltaics, energy storage etc. Designing thermoelectric (TE) alloys is especially challenging because it is a multi-property optimization problem, where the properties that contribute to high TE performance are interdependent. In this work, we develop a computational framework that combines first-principles calculations with alloy and point defect modeling to identify alloy compositions that optimize the electronic, thermal, and defect properties. We apply this framework to design n-type Ba 2(1–x) Sr 2x CdP 2 Zintl thermoelectric alloys. Our predictions of the crystallographic properties such as lattice parameters and site disorder are validated with experiments. To optimize the conduction band electronic structure, we perform band unfolding to sketch the effective band structures of alloys and find a range of compositions that facilitate band convergence and minimize alloy scattering of electrons. Here, we assess the n-type dopability of the alloys by extending the standard approach for computing point defect energetics in ordered structures. Through the application of this framework, we identify an optimal alloy composition range with the desired electronic and thermal transport properties, and n-type dopability. Such a computational framework can also be used to design alloys for other functional applications beyond TE.

36 MATERIALS SCIENCE↗

Experimentally informed structure optimization of amorphous TiO 2 films grown by atomic layer deposition

Amorphous titanium dioxide TiO 2 (a-TiO 2 ) has been widely studied, particularly as a protective coating layer on semiconductors to prevent corrosion and promote electron–hole conduction in photoelectrochemical reactions. The stability and longevity of a-TiO 2 is strongly affected by the thickness and structural heterogeneity, implying that understanding the structure properties of a-TiO 2 is crucial for improving the performance. This study characterized the structural and electronic properties of a-TiO 2 thin films (~17 nm) grown on Si by atomic layer deposition (ALD). Fluctuation spectra V(k) and angular correlation functions were determined with 4-dimensional scanning transmission electron microscopy (4D-STEM), which revealed the distinctive medium-range ordering in the a-TiO 2 film. A realistic atomic model of a-TiO 2 was established guided by the medium-range ordering and the previously reported short-range ordering of a-TiO 2 film, as well as the interatomic potential. The structure was optimized by the StructOpt code using a genetic algorithm that simultaneously minimizes energy and maximizes the match to experimental short- and medium-range ordering. The StructOpt a-TiO 2 model presents improved agreements with the medium-range ordering and the k-space location of the dominant 2-fold angular correlations compared with a traditional melt-quenched model. The electronic structure of the StructOpt a-TiO 2 model was studied by ab initio calculations and compared to the crystalline phases and experimental results. Finally, this work uncovered the medium-range ordering in a-TiO 2 thin films and provided a realistic a-TiO 2 structure model for further investigation of structure–property relationships and materials design. In addition, the improved multi-objective optimization package StructOpt was provided for structure determination of complex materials guided by experiments and simulations.

36 MATERIALS SCIENCE↗

Development of micro-four-point probe in a scanning tunneling microscope for in situ electrical transport measurement

Electrons at surface may behave differently from those in bulk of a material. Multi-functional tools are essential in comprehensive studies on a crystal surface. Here, we developed an in situ microscopic four-point probe (4PP) transport measurement system on the basis of a scanning tunneling microscope (STM). In particular, convenient replacement between STM tips and micro-4PPs enables systematic investigations of surface morphology, electronic structure, and electrical transport property of a same sample surface. Performances of the instrument are demonstrated with high-quality STM images, tunneling spectra, and low-noise electrical I-V characteristic curves of a single-layer FeSe film grown on a conductive SrTiO{sub 3} surface.

36 MATERIALS SCIENCE↗

Thermoelectric properties of doped BaHfO{sub 3}

We have studied the structural stability, electronic structure, optical properties and thermoelectric properties of doped BaHfO{sub 3} by full potential linearized augmented plane wave (FP-LAPW) method. The electronic structure of BaHfO{sub 3} doped with Sr shows enhances the indirect band gaps of 3.53 eV, 3.58 eV. The charge density plots show strong ionic bonding in Ba-Hf, and ionic and covalent bonding between Hf and O. Calculations of the optical spectra, viz., the dielectric function, refractive index and extinction coefficient are performed for the energy range are calculated and analyzed. Thermoelectric properties of semi conducting are also reported first time. The doped BaHfO{sub 3} is approximately wide band gap semiconductor with the large p-type Seebeck coefficient. The power factor of BaHfO{sub 3} is increased with Sr doping, decreases because of low electrical resistivity and thermal conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impedance spectroscopy studies in cobalt ferrite-reduced graphene oxide nanocomposite

(1-x)Cobalt ferrite-(x)reduced graphene oxidenanocomposites with x=0, 0.1, 0.2 and 0.3 were prepared by the ultrasonic method. The crystal symmetry modification due to reduced graphene oxide and cobalt ferrite interaction has been studied by employing the X-ray diffraction technique. Morphology of the samples was studied by the Field emission scanning electron microscopy (FE-SEM). Study on electrical properties of the cobalt ferrite-reduced graphene oxide nanocomposites explores the possible application of these composites as anode material. Impedance decreases with an increase in frequency as well as temperature, which supports an increase in ac electrical conductivity. The modified Debye relaxation model can explain the behavior of impedance in cobalt ferrite-reduced graphene oxide nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗