Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Keck/NIRC2 Imaging of the Warped, Asymmetric Debris Disk Around HD 32297

We present Keck/NIRC2 K(sub s) band high-contrast coronagraphic imaging of the luminous debris disk around the nearby, young A star HD 32297 resolved at a projected separation of r = 0.3 - 2.5" (approx equals 35 - 280 AU). The disk is highly warped to the north and exhibits a complex, "wavy" surface brightness profile interior to r approx equals 110 AU, where the peaks/plateaus in the profiles are shifted between the NE and SW disk lobes. The SW side of the disk is 50 - 100% brighter at r = 35 - 80 AU, and the location of its peak brightness roughly coincides with the disk's mm emission peak. Spectral energy distribution modeling suggests that HD 32297 has at least two dust populations that may originate from two separate belts likely at different locations, possibly at distances coinciding with the surface brightness peaks. A disk model fur a single dust belt including a phase function with two components and a 5 - 10 AU pericenter offset explains the disk's warped structure and reproduces some of the surface brightness profile's shape (e.g. the overall "wavy" profile, the SB peak/plateau shifts) but more poorly reproduces the disk's brightness asymmetry and the profile at wider separations (r > 110 AU). Although there may be a1ternate explanations, agreement between the SW disk brightness peak and disk's peak rom emission is consistent with an overdensity of very small, sub-blowout-sized dust and large, 0.1 - 1 mm-sized grains at approx equal 45 AU tracing the same parent population of planetesimals. New near-IR and submm observations may be able to clarify whether even more complex grain scattering properties or dynamical sculpting by an unseen planet are required to explain HD 32297's disk structure.

Currie, Thayne↗

Keck/NIRC2 Imaging of the Warped, Asymmetric Debris Disk Around HD 32297

We present Keck/NIRC2 Ks band high-contrast coronagraphic imaging of the luminous debris disk around the nearby, young A star HD 32297 resolved at a projected separation of r = 0.3-2.5 arcse (approx 35-280 AU). The disk is highly warped to the north and exhibits a complex, "wavy" surface brightness profile interior to r approx 110 AU, where the peaks/plateaus in the profiles are shifted between the NE and SW disk lobes. The SW side of the disk is 50 - 100% brighter at r = 35 - 80 AU, and the location of its peak brightness roughly coincides with the disk's mm emission peak. Spectral energy distribution modeling suggests that HD 32297 has at least two dust populations that may originate from two separate belts likely at different locations, possibly at distances coinciding with the surface brightness peaks. A disk model for a single dust belt including a phase function with two components and a 5-10 AU pericenter offset explains the disk's warped structure and reproduces some of the surface brightness profile's shape (e.g. the overall "wavy" profile, the SB peak/plateau shifts) but more poorly reproduces the disk's brightness asymmetry. Although there may be alternate explanations, agreement between the SW disk brightness peak and disk's peak mm emission is consistent with an overdensity of very small, sub-blowout-sized dust and large, 0.1-1 mm-sized grains at approx 45 AU tracing the same parent population of planetesimals. New near-IR and submm observations may be able to clarify whether even more complex grain scattering properties or dynamical sculpting by an unseen planet are required to explain HD 32297's disk structure.

Currie, Thayne↗

Maximum entropy modeling to identify physical drivers of shallow snowpack heterogeneity using unpiloted aerial system (UAS) lidar

Understanding the spatial variability of the snowpack is valuable for hydrologists and ecologists seeking to predict hydrological processes in a cold region. Snow distribution is a function of interactions among static variables, such as terrain, vegetation, and soil properties, and dynamic meteorological variables, such as solar radiation, wind speed and direction, and soil moisture. However, identifying the dominant physical drivers responsible for spatial patterns of the snowpack, particularly for ephemeral, shallow snowpacks, has been challenging due to the lack of the high-resolution snowpack and physical variables with high vertical accuracy as well as inherent limitations in traditional approaches. This study uses an Unpiloted Aerial System (UAS) lidar-based snow depth and static variables (1-m spatial resolution) to analyze field-scale spatial structures of snow depth and apply the Maximum Entropy (MaxEnt) model to identify primary controls over open terrain and forests at the University of New Hampshire Thompson Farm Research Observatory, New Hampshire, United States. We found that, among nine topographic and soil variables, plant functional type and terrain roughness contribute up to 80% and 76% of relative importance in the MaxEnt framework to predict locations of deeper or shallower snowpacks, respectively, across a mixed temperate forested and field landscape. Soil variables, such as organic matter and saturated hydraulic conductivity, were also important controls (up to 70% and 81%) on snow depth spatial variations for both open and forested landscapes suggesting spatial variations in soil variables under snow can control thermal transfer among soil, snowpack, and surface-atmosphere. This work contributes to improving land surface and snow models by informing parameterization of the sub-grid scale snow depths, down-scaling remotely sensed snow products, and understanding field scale snow states.

Eunsang Cho↗

MAGIC Mission Science and Applications Related to Cryosphere, Solid Earth and Neutral Atmosphere

The GRACE and GFO missions have revolutionised our understanding of mass movement at and below the surface of the Earth but they, nonetheless, have restrictions related to spatial and temporal resolution and instrument sensitivity that limits our ability to resolve certain processes. In this presentation we focus on the advances and capabilities that the proposed Mass change And Geosciences International Constellation (MAGIC) mission will deliver for cryosphere and solid Earth applications and will also consider the potential it will have for studying the neutral atmosphere. The time-varying gravity missions to date have had an effective spatial resolution of ~300 km, which is larger than the scale of any glacier or ice caps and larger than most catchments on the Greenland Ice Sheet. Even over Antarctica, the limited spatial resolution is a major limitation for regions such as the Antarctic Peninsula. Tectonic process, such as Earthquakes, volcanic activity and even viscous mantle flow can take place on scales smaller than can be resolved currently. The target resolution and accuracy for MAGIC over ice is 170 km at 2.6 mm/yr EWH over the long term and 250 km at 5.5 mm EWH at monthly resolution plus lower accuracy daily to weekly capabilities. We consider here what this means for understanding and observing ice mass exchange with the oceans and improving our ability to measure the manometric contribution to sea level rise. Based on similar targets, we also explore the improvements this offers for monitoring different types of solid Earth processes including geohazards, crustal evolution and deep interior properties and dynamics. We also consider what contributions MAGIC will be able to make to observations of thermosphere neutral density and related atmospheric parameters.

Jonathan Bamber↗

Lunar Lander Landing Modeling and Simulation in Simscape

The landing gear is a critical subsystem of a lander for a successful landing on the moon or a planet. During a landing event, structural loading, energy absorption and toppling stability are important factors for the landing gear development. These aspects can be studied using simulations. The landing gear comprising the primary struct, secondary structs, footpad, and joints, is easily modeled using Simscape Multibody toolbox. The energy absorption mechanisms in the structs is readily modeled using Simulink and Multibody blocks based on the relative motions of the inner and outer cylinder of the structures. During touchdown, the footpads strike the lunar surface, and the contact forces can be modeled including the soil mechanical properties. Slosh dynamics are included using a mechanical pendulum model. Tip-over controllers are developed using Simulink blocks and toolboxes. This model was intensively tested manually then additionally with Monte Carlo simulation. It offers the opportunity for landing stability study, i.e. the max slope a lander can land without tipping over in 3D realistic landing situations.

Wei Wu↗

Thermal balance of a wall with PCM-enhanced thermal insulation

ABSTRACT: PCM insulation mixtures function as lightweight thermal mass components. It is expected that these types of dynamic insulation systems will contribute to the objective of reducing energy use in buildings. In this paper, dynamic thermal properties of a material in which phase hange occurs are analyzed, using the temperature-dependent specific heat model. Integral formula for the total heat flow in finite time interval, across the surface of a slab of the phase change material, was derived. Simulations have been performed to analyze heat transfer through a light-weight wall assembly with PCM-enhanced insulation, in different external climate thermal conditions. Results of simulations indicate that for cyclic processes, the effect of PCM in an insulation layer results rather in time shifting of the heat flux extreme values than in reduction of the total heat flow. The heat gains maxima, resulting in high cooling loads, are shifted in time by about two hours and reduced about 15% to 30% for not very high external sol-air temperatures.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Architecture and operation of the Z Pulsed Power Facility vacuum system.

The Z Pulsed Power Facility at Sandia National Laboratories in Albuquerque, New Mexico, USA is one of the world's premier high energy density physics facilities. The Z Facility derives its name from the z-pinch phenomena which is a type of plasma confinement system that uses the electrical current in the plasma to generate a magnetic field that compresses it. Z refers to the direction of current flow, the z axis in a three dimensional Cartesian coordinate system. The multiterawatt, multimegajoule electrical pulse the Facility produces is 100-400 nanoseconds in time. Research and development programs currently being conducted on the Z Facility include inertial confinement fusion, dynamic material properties, laboratory astrophysics and radiation effects. The Z Facility vacuum system consists of two subsystems, center section and load diagnostics. Dry roughing pumps and cryogenic high vacuum pumps are used to evacuate the 40,000 liter, 200 square meter center section of the facility where the experimental load is located. Pumping times on the order of two hours are required to reduce the pressure from atmospheric to 10{sup -5} Torr. The center section is cycled from atmosphere to high vacuum for each experiment. The facility is capable of conducting one to two experiments per day. Numerous smaller vacuum pumping systems are used to evacuate load diagnostics. The megajoules of energy released during an experiment causes damage to the Facility that presents numerous challenges for reliable operation of the vacuum system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mapping Pn amplitude spreading and attenuation in Asia

Pn travels most of its path in the mantle lid. Mapping the lateral variation of Pn amplitude attenuation sheds light on material properties and dynamics of the uppermost region of the mantle. Pn amplitude variation depends on the wavefront geometric spreading as well as material attenuation. We investigated Pn geometric spreading, which is much more complex than a traditionally assumed power-law spreading model, using both synthetic and observed amplitude data collected in Asia. We derived a new Pn spreading model based on the formulation that was proposed previously to account for the spherical shape of the Earth (Yang et. al., BSSA, 2007). New parameters derived for the spreading model provide much better correction for Pn amplitudes in terms of residual behavior. Because we used observed Pn amplitudes to construct the model, the model incorporates not only the effect of the Earth's spherical shape, but also the effect of potential upper-mantle velocity gradients in the region. Using the new spreading model, we corrected Pn amplitudes measured at 1, 2, 4 and 6 Hz and conducted attenuation tomography. The resulting Pn attenuation model correlates well with the regional geology. We see high attenuation in regions such as northern Tibetan Plateau and the western Pacific subduction zone, and low attenuation for stable blocks such as Sichuan and Tarim basins.

58 GEOSCIENCES↗

Simulations of Microchannel Plate Sensitivity to <20 keV X-rays as a Function of Energy and Incident Angle

We present results of Monte Carlo simulations of microchannel plate (MCP) response to x-rays in the 250 eV to 20 keV energy range as a function of both x-ray energy and impact angle. The model is based on the model presented in Rochau et al. (2006). However, while the Rochau et al. (2006) model was two-dimensional, and their results only went to 5 keV, our results have been expanded to 20 keV, and our model has been incorporated into a three-dimensional Monte Carlo MCP model that we have developed over the past several years (Kruschwitz et al. 2011). X-ray penetration through multiple MCP pore walls is increasingly important above 5 keV. The effect of x-ray penetration through multiple pores on MCP performance was studied and is presented.

materials properties, dynamic shock, equation of s↗

MLCT excited states at interfaces and in rigid media: Applications in energy conversion

In this proposal for continued support from the DOE, we propose to build on our understanding of light-driven electron transfer by molecules and molecular assemblies on oxide surfaces. We will conduct a systematic investigation of injection and back electron transfer dynamics on the surfaces of thin (1-10 μm), mesoporous, transparent conducting oxide films consisting of 10-20 nm tin-doped indium oxide (Sn:In2O3, ITO)) nanoparticles. These materials are unique because they mimic the morphology, surface area, and oxide nature of conventional mesoporous, nanocrystalline metal oxide thin films such as TiO 2 , SnO2, and NiO used in DSSC and DSPEC applications but they are conductive with high electron mobilities (0.1-10 cm2 V-1 s-1) and conductivities (101-104 Ω-1 cm-1) over a wide range of applied potentials. Their high conductivities and metallic behavior allow the Fermi level at nanoparticle surfaces to be tuned systematically by varying an applied bias. We will investigate injection, intra-assembly, and back electron transfer dynamics on nanoITO by transient absorption measurements on the picosecond to millisecond timescales. One series of experiments will build on initial results from DOE-supported research and focus on the bias- and medium-dependence of interfacial electron transfer by surface-bound molecular chromophores to investigate: i) the bias dependence of injection and back electron transfer, ii) injection by short-lived, otherwise inaccessible excited-states, and iii) medium effects. In parallel, we will investigate the dynamic interfacial properties of nanoITO-bound molecular assemblies designed for photogalvanic solar energy conversion. These studies will focus on surface-prepared, layer-by-layer donor-chromophore-acceptor assemblies in which inter-molecular excited-state quenching leads to redox separation as opposed to interfacial electron transfer quenching by the semiconductor material. Transient absorption measurements performed on nanoITO|-acceptor-chromophore-donor (photogalvanic anode) and nanoITO|-donor-chromophore-acceptor (photogalvanic cathode) assemblies will be used to explore: i) light-induced intermolecular electron transfer in layer-by-layer assemblies and ii) bias dependence on transient redox energy storage and long range (>5 nm) electron transfer reactions.

30 DIRECT ENERGY CONVERSION↗

Role of Cyclic Phase Transitions in Additive Manufacturing of Metals and Alloys - Lessons Learned from Welding Science

Additive manufacturing (also known as 3D printing) of metals is considered to be a disruptive technology, able to produce limited number of high value components with topologically optimized geometries and functionalities. Realization of the above potential for real-world applications is stifled by lack of standard computational design tools; component certifications, varied starting powder feed stock compositions, methods to probe thermomechanical processes, microstructural homogeneity, residual stress, as well as, anisotropic static- and dynamic-material properties. Detailed research of direct energy deposition, laser- and electron-powder bed additive manufacturing demonstrates that the underlying physics of these processes are very similar to welding, except for complex boundary conditions. This paper will review published literature and on-going research with reference to fundamental aspects of heat and mass transfer, solidification under large (103 to 105 K/m) thermal gradients and (10-3 to 100 m/s) liquid solid-interface velocities, as well as, solid->solid transformation under repeated thermal excursions. Case studies on model based qualification of Ni- and Ti- alloy builds made by additive manufacturing (AM), based on the above fundamental knowledge will be discussed.

Babu, Sudarsanam Suresh↗

Electron-Ion Collider - science and concept

Quantum Chromodynamics (QCD) is the fundamental quantum theory of quarks and gluons that make up almost all the visible matter in the universe. Quarks interact by exchanging gluons, but gluons also interact with gluons, a unique feature of QCD. Despite being so central to QCD, the properties and dynamics of gluons remain largely unexplored. The inspiration to solve the profound mysteries surrounding this ‘glue’ drives the development of a next-generation facility, the Electron-Ion Collider (EIC).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine learning-enabled model-data integration for predicting subsurface water storage

Subsurface water storage (SWS) is a key variable of the climate system and a storage component for precipitation and radiation anomalies, inducing persistence in the climate system. It plays a critical role in climate-change projections and can mitigate the impacts of climate change on ecosystems. However, because of the difficult accessibility of the underground, hydrologic properties and dynamics of SWS are poorly known. Direct observations of SWS are limited, and accurate incorporation of SWS dynamics into Earth system land models remains challenging. We propose a machine learning-enabled model-data integration framework to improve the SWS prediction at local to conus scales in a changing climate by leveraging all the available observation and simulation resources, as well as to inform the model development and guide the observation collection. The accurate prediction will enable an optimal decision of water management and land use and improve the ecosystem's resilience to the climate change.

Lu, Dan↗