Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Pressure-Sensitive Paint Investigation of Double-Delta Wing Vortex Flow Manipulation

A pressure-sensitive paint (PSP) technique was applied in a wind tunnel experiment in the NASA Langley Research Center 8-Foot Transonic Pressure Tunnel to quantify the effect of wing fillets on the global vortex-induced surface static pressure field about a sharp leading-edge 76o/40o double delta wing, or strake-wing, model at subsonic and transonic speeds. Global calibrations of the PSP were obtained at M = 0.50, 0.70, 0.85, 0.95, and 1.20, a Reynolds number per unit length of 2.0 million, and angles of attack from 10 degrees to 20 degrees using an in-situ method featuring the simultaneous acquisition of electronically-scanned pressures (ESP) at discrete locations on the model. The mean error in the PSP measurements relative to the ESP data was approximately 2 percent or less at M = 0.50 to 0.85 but increased to several percent at M =0.95 and 1.20. The PSP pressure distributions and pseudo-colored planform view pressure maps clearly revealed the vortex-induced pressure signatures at all Mach numbers and angles of attack. Small fillets having a parabolic or diamond planform situated at the strake-wing intersection were designed to manipulate the vortical flows by, respectively, removing the leading-edge discontinuity or introducing additional discontinuities. The fillets caused global changes in the vortex-dominated surface pressure field that were effectively captured in the PSP measurements. The vortex surface pressure signatures were compared to available off-surface vortex cross-flow structures obtained using a laser vapor screen (LVS) flow visualization technique. The fillet effects on the PSP pressure distributions and the observed leading-edge vortex flow characteristics were consistent with the trends in the measured lift, drag, and pitching moment coefficients.

Erickson, Gary E.↗
NASA NTRS2005

Navier-Stokes Simulation of Airconditioning Facility of a Large Modem Computer Room

NASA recently assembled one of the world's fastest operational supercomputers to meet the agency's new high performance computing needs. This large-scale system, named Columbia, consists of 20 interconnected SGI Altix 512-processor systems, for a total of 10,240 Intel Itanium-2 processors. High-fidelity CFD simulations were performed for the NASA Advanced Supercomputing (NAS) computer room at Ames Research Center. The purpose of the simulations was to assess the adequacy of the existing air handling and conditioning system and make recommendations for changes in the design of the system if needed. The simulations were performed with NASA's OVERFLOW-2 CFD code which utilizes overset structured grids. A new set of boundary conditions were developed and added to the flow solver for modeling the roomls air-conditioning and proper cooling of the equipment. Boundary condition parameters for the flow solver are based on cooler CFM (flow rate) ratings and some reasonable assumptions of flow and heat transfer data for the floor and central processing units (CPU) . The geometry modeling from blue prints and grid generation were handled by the NASA Ames software package Chimera Grid Tools (CGT). This geometric model was developed as a CGT-scripted template, which can be easily modified to accommodate any changes in shape and size of the room, locations and dimensions of the CPU racks, disk racks, coolers, power distribution units, and mass-storage system. The compute nodes are grouped in pairs of racks with an aisle in the middle. High-speed connection cables connect the racks with overhead cable trays. The cool air from the cooling units is pumped into the computer room from a sub-floor through perforated floor tiles. The CPU cooling fans draw cool air from the floor tiles, which run along the outside length of each rack, and eject warm air into the center isle between the racks. This warm air is eventually drawn into the cooling units located near the walls of the room. One major concern is that the hot air ejected to the middle isle might recirculate back into the cool rack side and cause thermal short-cycling. The simulations analyzed and addressed the following important elements of the computer room: 1) High-temperature build-up in certain regions of the room; 2) Areas of low air circulation in the room; 3) Potential short-cycling of the computer rack cooling system; 4) Effectiveness of the perforated cooling floor tiles; 5) Effect of changes in various aspects of the cooling units. Detailed flow visualization is performed to show temperature distribution, air-flow streamlines and velocities in the computer room.

Source record↗
NASA NTRS2012

Inner Plasma Structure of the Low-Latitude Reconnection Layer

We report a clear transition through a reconnection layer at the low-latitude magnetopause which shows a complete traversal across all reconnected field lines during northwestward interplanetary magnetic field (IMF) conditions. The associated plasma populations confirm details of the electron and ion mixing and the time history and acceleration through the current layer. This case has low magnetic shear with a strong guide field and the reconnection layer contains a single density depletion layer on the magnetosheath side which we suggest results from nearly field-aligned magnetosheath flows. Within the reconnection boundary layer, there are two plasma boundaries, close to the inferred separatrices on the magnetosphere and magnetosheath sides (Ssp and Ssh) and two boundaries associated with the Alfvén waves (or Rotational Discontinuities, RDsp and RDsh). The data are consistent with these being launched from the reconnection site and the plasma distributions are well ordered and suggestive of the time elapsed since reconnection of the field lines observed. In each sub-layer between the boundaries the plasma distribution is different and is centered around the current sheet, responsible for magnetosheath acceleration. We show evidence for a velocity dispersion effect in the electron anisotropy that is consistent with the time elapsed since reconnection. In addition, new evidence is presented for the occurrence of partial reflection of magnetosheath electrons at the magnetopause current layer.

magnetosheath↗
NASA NTRS2019

TPSAS-NF1676L-34013-DND

Currently, many experiments pursuing comprehensive characterization of the atmosphere include coordinated observations by both lidar and polarimeters in order to obtain important complimentary information about aerosol properties. The most advanced passive observations by space-based multi-angle polarimeters are sensitive to the properties of aerosol in total atmospheric column, but have very limited sensitivity to vertical structure of the atmosphere. Polarimeter observations can be used not only for retrieval of aerosol optical thickness, but also for deriving microphysical information about aerosol particle shape, size distribution, complex refractive index, and the properties of underlying surface (Dubovik et al., 2019). In a contrast, the lidar observations of atmospheric responses from different altitudes to laser pulses are designed to provide vertical profiles of atmospheric characteristics. Here we present the recent advancement in GRASP algorithm (Generalized Aerosol Retrieval of Atmospheric and Surface Properties) (Dubovik et al., 2011, 2014) that allows simultaneous inversion of co-incident lidar and polarimeter spaceborne observations and derives a united set of vertically resolved aerosol and surface parameters. Such synergetic retrieval is an extension to satellite data of the approach for synergetic processing of active and passive measurements developed earlier by (Lopatin et al., 2013) for ground-based observations. Another addition to these developments is the inclusion of Raman-shifted and volume depolarization backscattering observations that improve sensitivity to the vertical properties of aerosol, while polarimetric observations provide sufficient constraints on aerosol type and loading that generally are missing in lidar signals. The potential and limitations of such synergetic processing is illustrated by application to co-incident PARASOL and CALIPSO data.

Anton Lopatin↗
NASA NTRS1983

A function space approach to state and model error estimation for elliptic systems

An approach is advanced for the concurrent estimation of the state and of the model errors of a system described by elliptic equations. The estimates are obtained by a deterministic least-squares approach that seeks to minimize a quadratic functional of the model errors, or equivalently, to find the vector of smallest norm subject to linear constraints in a suitably defined function space. The minimum norm solution can be obtained by solving either a Fredholm integral equation of the second kind for the case with continuously distributed data or a related matrix equation for the problem with discretely located measurements. Solution of either one of these equations is obtained in a batch-processing mode in which all of the data is processed simultaneously or, in certain restricted geometries, in a spatially scanning mode in which the data is processed recursively. After the methods for computation of the optimal esimates are developed, an analysis of the second-order statistics of the estimates and of the corresponding estimation error is conducted. Based on this analysis, explicit expressions for the mean-square estimation error associated with both the state and model error estimates are then developed. While this paper focuses on theoretical developments, applications arising in the area of large structure static shape determination are contained in a closely related paper (Rodriguez and Scheid, 1982).

Rodriguez, G.↗
NASA NTRS2002

Characteristics of Vertical Profiles of Reflectivity and Doppler Derived From TRMM Field Campaigns

The TRMM Precipitation Radar (PR) measures the vertical profile of reflectivity from which the surface rain rate is estimated after attenuation corrections in the 2A21 algorithm. Characteristics of the vertical reflectivity profile is important for various reasons ranging from scientific to instrument algorithms. It is well known that different types of precipitation such as stratiform or convection, have different heating profiles. The vertical profile of reflectivity can provide information on precipitation classification. The vertical reflectivity structure also provides information on precipitation processes such as growth and aggregation. In terms of TRMM algorithms, an independent estimate of the vertical profiles are also extremely important since the PR returns can be attenuated in the rain layer near the surface. Corrections for attenuation are required in the lowest few kilometers, necessitating some assumptions about the rain size distributions and the reflectivity profile below the lowest measurement unaffected by the surface return. Furthermore, some assumptions about the vertical reflectivity profile are required for Ground Validation (GV) radars, since their lowest scan may be 1 or more kilometers above the surface. Statistics on the vertical reflectivity and Doppler structure are presented from the ER-2 Doppler Radar (EDOP) which participated in several TRMM field campaigns (TEFLUN-A, TEFLUN-B, and LBA) and CAMEX-3. The ER-2 aircraft overflew diverse precipitation types during these campaigns. EDOP is an X-band (9.6 GHz) radar for which returns are less attenuated than at the TRMM PR frequency. The EDOP profiles are first corrected for attenuation using the SRT method. The data from all the ER-2 campaigns are then classified by type (convection, stratiform, and other) and then statistics were performed on the vertical reflectivity and Doppler profiles in the form of CFAD's. These CFADs are compared and discussed. The computed CFAD's indicate significant differences as a function of precipitation type and location (hurricane versus non-hurricane, Brazil versus Florida). The implications of these profiles will be discussed.

Starr, David OC.↗
NASA NTRS2004

Eccentric loading of microtensile specimens

Ceramic materials have a lower density than most metals and are capable of performing at extremely high temperatures. The utility of these materials is obvious; however, the fracture strength of brittle materials is not easily predicted and often varies greatly. Characteristically, brittle materials lack ductility and do not yield as other materials. Ceramics materials are naturally populated with microscopic cracks due to fabrication techniques. Upon application of a load, stress concentration occurs at the root of these cracks and fracture will eventually occur at some not easily predicted strength. In order to use ceramics in any application some design methodology must exist from which a component can be placed into service. This design methodology is CARES/LIFE (Ceramics Analysis and Reliability Evaluation of Structures) which has been developed and refined at NASA over the last several decades. The CARES/LIFE computer program predicts the probability of failure of a ceramic component over its service life. CARES combines finite element results from a commercial FE (finite element) package such as ANSYS and experimental results to compute the abovementioned probability of failure. Over the course of several tests CARES has had great success in predicting the life of various ceramic components and has been used throughout industry. The latest challenge is to verify that CARES is valid for MEMS (Micro-Electro Mechanical Systems). To investigate a series of microtensile specimens were fractured in the laboratory. From this data, material parameters were determined and used to predict a distribution of strength for other specimens that exhibit a known stress concentration. If the prediction matches the experimental results then these parameters can be applied to a desired component outside of the laboratory. During testing nearly half of the tensile Specimens fractured at a location that was not expected and hence not captured in the FE model. It has been my duty to investigate the nature of this phenomenon in hopes of finding a better correlation between theory and empirical results. To investigate I built complete FE models of all of the tensile specimens using ANSYS. It is suspected that some misalignment naturally occurs during testing and thus additional bending stresses are present in the specimens. I modeled this eccentric loading and ran several FE trials using ANSYS/PDS (a probabilistic design system in ANSYS). My objective this summer has been familiarize myself with the CARES/LIFE program in hopes of using it in conjunction with ANSYS to help verify that CARES is applicable to MEMS-scale (greater that 1 micron, less than 1 millimeter) components.

Trapp, Mark A.↗
NASA NTRS2007

Programmable Thermostats for MPLM Shell Heater Control ULF1: Thermal Performances - 1

The Multi-Purpose Logistics Module (MPLM) is the primary carrier for "pressurized" logistics to and from the International Space Station (ISS). The MPLM is transported in the payload bay of the Space Shuttle and is docked to the ISS for unloading, and reloading, of contents within the ISS shirt sleeve environment. Foil heaters, controlled originally with bi-metallic thermostats, are distributed across the outside of the MPLM structure and are utilized to provide energy to the structure to avoid exposure to cold temperatures and prevent condensation. The existing bi-metallic, fixed temperature set point thermostats have been replaced with Programmable Thermostats Modules (PTMs) in the Passive Thermal Control Subsystem (PTCS) 28Vdc shell heater circuits. The goal of using the PTM thermostat is to improve operational efficiency of the MPLM on-orbit shell heaters by providing better shell temperature control via feedback control capability. Each heater circuit contains a programmable thermostat connected to an external temperature sensor, a Resistive Temperature Device (RTD), which is used to provide continuous temperature monitoring capability. Each thermostat has programmable temperature set points and control spans. The data acquisition system uses a standard RS-485 serial interface communications cable to provide digital control capability. The PTM system was designed by MSFC, relying upon ALTEC support for their integration within the MPLM system design, while KSC performed the installation and ground checkout testing of the thermostat and RS-485 communication cable on the MPLM FM1 flight module. The PTMs were used for the first time during the STS-121/ULF1.1 mission. This paper will describe the design, development and verification of the PTM system, as well as the PTM flight performance and comparisons with SINDA thermal model predictions.

Glasgow, Shaun↗
NASA NTRS2011

Canopy Spectral Invariants: Application to Classification of Forest Types from Hyperspectral Data - Part 2

Many studies have been conducted to demonstrate the ability of hyperspectral data to discriminate plant dominant species. Most of them have employed the use of empirically based techniques, which are site specific, requires some initial training based on characteristics of known leaf and/or canopy spectra and therefore may not be extendable to operational use or adapted to changing or unknown land cover. In this paper we propose a physically based approach for separation of dominant forest type using hyperspectral data. The radiative transfer theory of canopy spectral invariants underlies the approach, which facilitates parameterization of the canopy reflectance in terms of the leaf spectral scattering and two spectrally invariant and structurally varying variables - recollision and directional escape probabilities. The methodology is based on the idea of retrieving spectrally invariant parameters from hyperspectral data first, and then relating their values to structural characteristics of three-dimensional canopy structure. Theoretical and empirical analyses of ground and airborne data acquired by Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) over two sites in New England, USA, suggest that the canopy spectral invariants convey information about canopy structure at both the macro- and micro-scales. The total escape probability (one minus recollision probability) varies as a power function with the exponent related to the number of nested hierarchical levels present in the pixel. Its base is a geometrical mean of the local total escape probabilities and accounts for the cumulative effect of canopy structure over a wide range of scales. The ratio of the directional to the total escape probability becomes independent of the number of hierarchical levels and is a function of the canopy structure at the macro-scale such as tree spatial distribution, crown shape and size, within-crown foliage density and ground cover. These properties allow for the natural separation of dominant forest classes based on the location of points on the total escape probability vs the ratio log-log plane.

Schull, M. A.↗
NASA NTRS2019

Design and Construction of a NASA Airborne and Field Investigation Inventory

NASA conducts airborne and field investigations that produce a wealth of valuable research data. Unfortunately, this data is often scattered across individual scientist hard drives or NASA Distributed Active Archive Centers and it can be difficult to locate and retrieve. Although satellite data has been successfully consolidated by tools such as EarthData Search, airborne and field investigation data present unique challenges stemming from the variability of temporal, spatial, platform, and instrument metadata. To address these difficulties with data retrieval and metadata variability, the Interagency Implementation and Concepts Team established an Airborne Data Management Group to improve airborne data search, understanding, access, and use. Surveys have been conducted of end users in order to build query lists that will drive the augmentation and standardization of existing metadata. Detailed metadata was then laboriously compiled from present and historic airborne and field investigations to build a database that will enable intelligent data search and retrieval. The inventory structure and function will be described and demonstrated. The purpose of this presentation is to bring awareness to this effort, to highlight and describe the issues and complications in development, and to increase user interest prior to public release in 2020.

Davis, Carson↗
NASA NTRSDate not supplied

Production and Characterization of Additively Manufactured Radiator Panels with Integral Branching Heat Pipes for High-Temperature Heat Rejection

Emerging concepts for fission surface power and nuclear electric propulsion necessitate lightweight, mechanically robust, and thermally efficient heat rejection radiators. State-of-the-art intermediate-temperature (~400 K) composite radiator assemblies have been developed based on titanium-water heat pipes bonded to metal, graphite, and carbon-fiber-based panels. NASA has identified a need for new radiator concepts that can operate at even higher temperatures (500 – 600 K), minimize thermal resistances and thermal stress failures at bond interfaces, and approach areal densities of 2 – 3 kg m -2 . To meet these needs, our team is developing additively manufactured (AM) radiator panels with integral branching wicking heat pipe networks. Water is selected as the working fluid for this temperature range. Based on simulations and thermal vacuum experiments, these branching embedded heat pipe networks can efficiently distribute heat over panels for finned surface efficiencies of η f >70% at T H = 500 K input heat. This paper first presents laser powder-bed fusion AM strategies to produce embedded porous structures for wicking heat pipes in Inconel 718 and titanium alloys (commercially pure and Ti-6Al-4V alloys). Post-build chemical and thermal treatments are described that yield hydrophilic wicking surfaces for operation with water. Transient rate-of-rise experiments with water and acetone are reported that yield estimates for AM wick porosity (ϵ), permeability (K), and effective pore radius (r pore ). Based on the wick characterization results, small prototype radiator panels (75 × 125 mm) with integrated heat pipe networks were manufactured. Heat rejection performance data are presented from cold thermal vacuum testing, with heat input temperatures up to ~510 K. Future efforts will focus on improving heat pipe performance, optimizing radiator mass, and evaluating larger panels to assess scalability.

thermal management↗
NASA NTRS2024

Production and Characterization of Additively Manufactured Radiator Panels With Integral Branching Heat Pipes for High-Temperature Heat Rejection

Emerging concepts for fission surface power and nuclear electric propulsion necessitate lightweight, mechanically robust, and thermally efficient heat rejection radiators. State-of-the-art intermediate-temperature (~400 K) composite radiator assemblies have been developed based on titanium-water heat pipes bonded to metal, graphite, and carbon-fiber-based panels. NASA has identified a need for new radiator concepts that can operate at even higher temperatures (500 – 600 K), minimize thermal resistances and thermal stress failures at bond interfaces, and approach areal densities of 2 – 3 kg m -2 . To meet these needs, our team is developing additively manufactured (AM) radiator panels with integral branching wicking heat pipe networks. Water is selected as the working fluid for this temperature range. Based on simulations and thermal vacuum experiments, these branching embedded heat pipe networks can efficiently distribute heat over panels for finned surface efficiencies of η f >70% at T H = 500 K input heat. This paper first presents laser powder-bed fusion AM strategies to produce embedded porous structures for wicking heat pipes in Inconel 718 and titanium alloys (commercially pure and Ti-6Al-4V alloys). Post-build chemical and thermal treatments are described that yield hydrophilic wicking surfaces for operation with water. Transient rate-of-rise experiments with water and acetone are reported that yield estimates for AM wick porosity (ϵ), permeability (K), and effective pore radius ( r pore ). Based on the wick characterization results, small prototype radiator panels (75 × 125 mm) with integrated heat pipe networks were manufactured. Heat rejection performance data are presented from cold thermal vacuum testing, with heat input temperatures up to ~510 K. Future efforts will focus on improving heat pipe performance, optimizing radiator mass, and evaluating larger panels to assess scalability.

nuclear electric propulsion↗
NASA NTRS2024

SOFIA/HAWC+ Far-Infrared Polarimetric Large-area CMZ Exploration Survey. III. Full Survey Data Set

We present the second data release (DR2) of the Far-InfraREd Polarimetric Large-Area CMZ Exploration (FIREPLACE) survey. This survey utilized the Stratospheric Observatory for Infrared Astronomy High-resolution Airborne Wideband Camera plus instrument at 214 μm (E band) at a resolution of 19"6 to observe thermal polarized dust emission throughout the Central Molecular Zone (CMZ). DR2 consists of observations obtained in 2022 covering the region of the CMZ extending from the Brick to the Sgr C molecular clouds (corresponding to a 1° × 0°.75 region of the sky). We combine DR2 with the first FIREPLACE data release (DR1) to obtain full coverage of the CMZ (a 1°.5 × 0°.75 region of the sky). After applying total and polarized intensity significance cuts on the full FIREPLACE data set, we obtain ∼64,000 Nyquist-sampled polarization pseudovectors. The distribution of polarization pseudovectors confirms a bimodal distribution in the CMZ magnetic field orientations, recovering field components that are oriented predominantly parallel or perpendicular to the Galactic plane. This distribution of orientations is similar to what was observed in DR1 and other studies. We also inspect the magnetic fields toward a set of prominent CMZ molecular clouds (the Brick, Three Little Pigs, 50 and 20 km s −1 clouds, circumnuclear disk, CO 0.02-0.02, and Sgr C), revealing spatially varying magnetic fields having orientations that generally trace the total intensity morphologies of the clouds. We find evidence that compression from stellar winds and shear from tidal forces are prominent mechanisms influencing the structure of the magnetic fields.

Molecular clouds↗
NASA NTRS1989

The global distribution on total ozone - Toms satellite measurements

The general behavior of total ozone by season and latitude was known before 1930 through the pioneering observations by Dobson. The ozone record at Oxford and other European stations was dominated by an annual cycle and by irregular short term fluctuations. The amplitude and phase of the annual cycle were determined at representative latitudes in both hemispheres. However, the short term variations appeared to be meteorological origin, although the specific cause could not be identified. Data from the Total Ozone Mapping Spectrometer (TOMS) on the Nimbus 7 spacecraft, with global coverage at an average spatial resolution of 66 km, can now be used to completely map the total ozone field. These maps demonstrate that troughs and ridges in the upper troposphere are responsible for the large, short term ozone variations found at middle latitudes, while in the tropics, the steady, low ozone levels show broad scale structure associated with the Hadley circulation.

Krueger, Arlin J.↗
NASA NTRS2007

F15B-Quiet Spike Aeroservoelastic Flight Test Data Analysis

Airframe structural morphing technologies designed to mitigate sonic boom strength are being developed by Gulfstream Aerospace Corporation (GAC). Among these technologies is a concept in which an aircraft's frontend would be extended prior to supersonic acceleration. This morphing would effectively lengthen the vehicle, reducing peak sonic boom amplitude, but is also expected to partition the otherwise strong bow shock into a series of reduced-strength, non-coalescing shocklets. This combination of boom shaping techniques is predicted to transform the classic, high-impulse N-wave pattern typically generated by an aircraft traveling at supersonic speed into a signature more closely resembling a sinusoidal wave with a greatly reduced perceived loudness. 'QuietSpike' is GAC's nomenclature for its recently patented front-end vehicle morphing arrangement. The ability of Quiet Spike to effectively shape a vehicle's far- field sonic boom signature is highly dependent on the area distribution characteristics of the aircraft. The full aeroacoustic benefits of front-end morphing at farfield are only possible when the QuietSpike article and vehicle configuration are designed in consideration of each other. Adding QuietSpike technology to the airframe of an existing, non-boom-optimized supersonic vehicle is unlikely to result in an improved far-field signature due to the generally over-powering influence of wing- and inlet-generated shocks. Therefore, it is generally recognized within NASA and the industry that a clean-sheet vehicle design is required to demonstrate the theoretically predicted far-field aeroacoustic benefits of QuietSpike type morphing and other boom- mitigating concepts. NASA's Aeronautics Research Mission Directorate (ARMD) Supersonics Division has placed increased priority on near-term development and flight-testing of such a vehicle. To help achieve this objective, static and dynamic aerostructural proof-of-concept testing was considered a prudent step prior to a clean-sheet effort in order to reduce risk associated with a follow-on test program. Following a survey of potential test platforms, NASA Dryden's F-15B was selected as the target test vehicle primarily because of its unique ability to carry a largescale test apparatus to relevant supersonic flight speeds, so called the F15 -QS. The QuietSpike test article was constructed primarily of composite materials and attached to the forward fuselage of the F-1 5B bulkhead (see Figures 1,2). The QuietSpike test article replaces the current flight test noseboom and radome assembly. Power is supplied to the Quiet Spike motor assembly in order to extend and retract the Spike, and the Quiet Spike test article was appropriately instrumented with accelerometers, strain gages, pressure transducers, and thermocouples.

Brenner, Martin J.↗
NASA NTRS1982

IUE observations of lines of sight with peculiar ultraviolet extinction

Low resolution IUE data were used to derive UV extinction curves for a group of stars known to have peculiar extinction parameters from ANS data. The resulting curves have a wide range of appearances. Although the ratio E(BUMP)/E(B-V) differs by a factor of three in the extreme cases, the wavelength of maximum absorption does not appear to change. No evidence for new fine structure in UV extinction was found. The structure near 62 micrometers in the existing mean extinction curves appears to be the result of luminosity mismatch errors. The new extinction curves have shapes that separate into two distinct classes; those associated with clear field extinction and those associated with extinction in dense nebular environments. The range of variation in the curves is so large, the common practice of ironing out the bump can produce enormous errors in the resultant UV energy distributions when E(B-V) 0.3.

Massa, D.↗
NASA NTRS1985

Voyager Saturnian ring measurements and the early history of the solar system

The mass distribution in the Saturnian ring system is investigated and compared with predictions from plasma cosmogony. According to this theory, the matter in the rings was once a magnetized plasma, in which gravitation is balanced by the centrifugal and electromagnetic forces. As the plasma is neutralized, the electromagnetic forces disappear and the matter falls in to 2/3 of the original saturnocentric distance. This causes the cosmogonic shadow effect, demonstrated for the large scale structure of the Saturnian ring system. It is shown that many structures of the present ring system can be understood as shadows and antishadows of cosmogonic origin. These appear in the form of double rings centered around a position a factor 0.64 (slightly 2/3) closer to Saturn than the causing feature. Voyager data agree with an accuracy 1%.

Alfven, H.↗
NASA NTRS1990

AEOSS runtime manual for system analysis on Advanced Earth-Orbital Spacecraft Systems

Advanced earth orbital spacecraft system (AEOSS) enables users to project the required power, weight, and cost for a generic earth-orbital spacecraft system. These variables are calculated on the component and subsystem levels, and then the system level. The included six subsystems are electric power, thermal control, structure, auxiliary propulsion, attitude control, and communication, command, and data handling. The costs are computed using statistically determined models that were derived from the flown spacecraft in the past and were categorized into classes according to their functions and structural complexity. Selected design and performance analyses for essential components and subsystems are also provided. AEOSS has the feature permitting a user to enter known values of these parameters, totally and partially, at all levels. All information is of vital importance to project managers of subsystems or a spacecraft system. AEOSS is a specially tailored software coded from the relational database program of the Acius' 4th Dimension with a Macintosh version. Because of the licensing agreements, two versions of the AEOSS documents were prepared. This version, AEOSS Runtime Manual, is permitted to be distributed with a finite number of the restrictive 4D Runtime version. It can perform all contained applications without any programming alterations.

Lee, Hwa-Ping↗