Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “confining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Yield degradation in inertial-confinement-fusion implosions due to shock-driven kinetic fuel-species stratification and viscous heating

Anomalous thermonuclear yield degradation (i.e., that not describable by single-fluid radiation hydrodynamics) in Inertial Confinement Fusion (ICF) implosions is ubiquitously observed in both Omega and National Ignition experiments. Multiple experimental and theoretical studies have been carried out to investigate the origin of such a degradation. Relative concentration changes of fuel-ion species, as well as kinetically enhanced viscous heating, have been among possible explanations proposed for certain classes of ICF experiments. In this study, we investigate the role of such kinetic plasma effects in detail. To this end, we use the iFP code to perform multi-species ion Vlasov-Fokker-Planck simulations of ICF capsule implosions with the fuel comprising various hydrodynamically equivalent mixtures of deuterium (D) and helium-3 (3He), as in the original. We employ the same computational setup as in O. Larroche, which was the first to simulate the experiments kinetically. However, unlike the Larroche study, and in partial agreement with experimental data, we find a systematic yield degradation in multi-species simulations versus averaged-ion simulations when the D-fuel fraction is decreased. This yield degradation originates in the fuel-ion species stratification induced by plasma shocks, which imprints the imploding system and results in the relocation of the D ions from the core of the capsule to its periphery, thereby reducing the yield relative to a non-separable averaged-ion case. By comparing yields from the averaged-ion kinetic simulations and from the hydrodynamic scaling, we also observe yield variations associated with ion kinetic effects other than fuel-ion stratification, such as ion viscous heating, which is typically neglected in hydrodynamic implosions' simulations. Since our kinetic simulations are driven by hydrodynamic boundary conditions at the fuel-ablator interface, they cannot capture the effects of ion viscosity on the capsule compression, or effects associated with the interface, which are expected to be important. As a result, studies of such effects are left for future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visualizing deceleration-phase instabilities in inertial confinement fusion implosions using an “enhanced self-emission” technique at the National Ignition Facility

High-mode perturbations and low-mode asymmetries were measured in the deceleration phase of indirectly-driven, deuterium gas filled inertial confinement fusion (ICF) capsule implosions at convergence ratios of 10 to 15, using a new “enhanced emission” technique at the National Ignition Facility (NIF) [E. M. Campbell, R. Cauble, and B. A. Remington, AIP Conf. Proc. 429, 3 (1998)]. In these experiments, a high spatial resolution Kirkpatrick-Baez microscope was used to image the x-ray emission from the inner surface of a high-density-carbon (HDC) capsule’s shell. Use of a high atomic number dopant in the shell enabled time-resolved observations of shell perturbations penetrating into the hot spot. This allowed the effects of the perturbations and asymmetries on degrading neutron yield to be directly measured. In particular, mix induced radiation losses of ~400 J from the hot spot resulted in a neutron yield reduction of a factor of ~2. In a subsequent experiment with a significantly increased level of short-mode initial perturbations, shown through the enhanced imaging technique to be highly organized radially, the neutron yield dropped an additional factor of ~2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stable and confined burn in a Revolver ignition capsule

In this paper, the main burn phase physics in a Revolver ignition capsule is analyzed and found to exhibit a new feature where pusher stagnation is persistent and burn occurs with the fuel at a fixed volume. The pressure and density gradients at the fuel-pusher interface are both positive making it stable to Rayleigh-Taylor growth. Expansion cooling and RT mixing are absent from the Revolver burn during this time. The effect is due to the massive heavy metal pusher shell being compressed during implosion and heated on an inner layer by the Marshak wave. The pusher is driven to a higher pressure than the DT fuel and becomes a fuel confining shell starting at stagnation and continuing past the time of peak burn. This period of persistent stagnation lasts for approximately 100 ps (in the baseline design) with a fuel burnup during stagnation of 40%. Finally, this behavior does not occur in any other capsule designs, including the double shell schemes that also employ a heavy metal pusher.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimizing neutron imaging line of sight locations for maximizing sampling of the cold fuel density in inertial confinement fusion implosions at the National Ignition Facility

We report that neutron imaging provides a ready measurement of the shape of the “hot spot” core of an inertial confinement fusion implosion. The 14-MeV neutrons emitted by deuterium-tritium reactions are imaged at the National Ignition Facility using a pinhole array onto a scintillator, and the images are recorded on a camera. By changing the gate time of the camera, lower energy neutrons, downscattered by the cold fuel surrounding the hot spot, are recorded. The cold fuel density can be reconstructed using the two images. The kinematics of the scattering coupled with the scattering cross sections restrict the angular extent of the cold fuel sampled, with the backside of the implosion not being sampled at all. This work demonstrates the limited region of the cold fuel measured by the current line of sight (40%). Finally, at completion of the three planned lines of sight, 79% of the cold fuel will be sampled.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gallium nitride (GaN) devices as a platform technology for radiation hard inertial confinement fusion diagnostics

Inertial Confinement Fusion (ICF) is undergoing more detailed research to increase neutron yield and will require high resolution imaging near the target. Neutron damage to diagnostics remains a serious issue in understanding and achieving ICF. We have demonstrated that Gallium Nitride (GaN) optoelectronic devices have exceptional neutron radiation hardness, by systematic testing of neutron radiation effects in GaN devices and materials with elevated neutron fluence levels and a broad neutron energy spectrum. During the 2013-2017 run cycles at Los Alamos Neutron Science Center (LANSCE), we irradiated various GaN materials and devices with fast and thermal plus resonance neutrons at several beamlines. This work presents a radiation hardness study for Aluminum Gallium Nitride and Gallium Nitride (AlGaN/GaN) deep UV LEDs irradiated at the LANSCE 4FP60R beamline. The fluence level was up to 2.4 × 10 13 neutrons/cm 2 for neutrons with energies greater than 0.1 MeV. The device performance was monitored in real time. After three years of irradiation studies, we found that the GaN devices maintained operation in the forward active region. The current and voltage relation (I-V curves) varied insignificantly in the linear region. Finally, our results demonstrate the radiation hardness needed for laser fusion diagnostics at least up to 10 17 neutron yield per shot, if the diagnostics is placed 1 m away from the target, where the neutron fluence per shot is approximately 8 × 10 11 n/cm 2 . The GaN devices can operate for multiple shots.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mitigating laser-imprint effects in direct-drive inertial confinement fusion implosions with an above-critical-density foam layer

Low-density foams of low-/mid-Z materials have been previously proposed to mitigate laser imprint for direct-drive inertial confinement fusion (ICF). For foam densities above the critical density of the drive laser, the mechanism of laser-imprint mitigation relies on the reduced growth rate of Rayleigh–Taylor instability because of the increased ablation velocity and density scale length at the ablation surface. Experimental demonstration of this concept has been limited so far to planar-target geometry. The impact of foams on spherical implosions has not yet been explored in experiments. To examine the viability of using an above-critical-density foam layer to mitigate laser-imprint effects in direct-drive ICF implosions on OMEGA, we have performed a series of 2-D DRACO simulations with state-of-the-art physics models, including nonlocal thermal transport, cross-beam energy transfer, and first-principles equation-of-state tables. The simulation results indicate that a 40-μm-thick CH or SiO 2 foam layer with a density of p = 40 mg/cm 3 added to a D2-filled polystyrene (CH) capsule can significantly improve the moderate-adiabat (α ≈ 3) implosion performance. In comparison with the standard CH target implosion, an increase of neutron yield by a factor of 4 to 8 and the recovery of 1-D compression pR are predicted by DRACO simulations for a foam-target surface roughness of σ rms ≤ 0.5 μm. These encouraging results could readily facilitate experimental demonstrations of laser-imprint mitigation with an above-critical-density foam layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of three-dimensional hot-spot flow asymmetry on ion-temperature measurements in inertial confinement fusion experiments

Three-dimensional (3-D) implosion asymmetries lead to signficant variations in ion-temperature measurements in inertial confinement fusion experiments. We present an analytical method to generalize the physical properties of velocity variance in the Brysk ion-temperature model. This analysis provides a consistent explanation for the 3-D effects of inferred ion-temperature variations for various single modes and multimodes modeled by the deceleration-phase hydrocode DEC3D and the neutron transport code IRIS3D . The effect of the hot-spot ow asymmetry on variations in ion-temperature measurement is shown uniquely determined by a complete set of six hot-spot flow parameters. An approximated solution to the minimum inferred ion temperature is derived and shown to be close to the thermal ion temperature for low mode l = 1, which exhibits the largest anisotropic velocity variance in the single-mode spectrum. In conclusion, the isotropic velocity variance for low mode l = 2 is shown to result in the minimum inferred ion temperatures being well above the thermal ion temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Finite Larmor radius effects at the high confinement mode pedestal and the related force-free steady state

In this letter, we will first relate our previous calculations on the radial electric field at the high confinement H-mode pedestal to the actual magnetic fusion experimental measurements. We will then discuss the new pressure balance due to the E × B current, which is induced by the resulting radial electric field, and its impact on the gyrokinetic MHD equations as well as their conservation properties in the force-free steady state. Here the recent controversy on the H-mode physics will also be addressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fuel-ion diffusion in shock-driven inertial confinement fusion implosions

The impact of fuel-ion diffusion in inertial confinement fusion implosions is assessed using nuclear reaction yield ratios and reaction histories. In T3He-gas-filled (with trace D) shock-driven implosions, the observed TT/T3He yield ratio is ∼2× lower than expected from temperature scaling. In D3He-gas-filled (with trace T) shock-driven implosions, the timing of the D3He reaction history is ∼50 ps earlier than those of the DT reaction histories, and average-ion hydrodynamic simulations cannot reconcile this timing difference. Both experimental observations are consistent with reduced T ions in the burn region as predicted by multi-ion diffusion theory and particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improved inertial confinement fusion gamma reaction history 12 C gamma-ray signal by direct subtraction

The Gamma Reaction History Diagnostic (GRH) located at the National Ignition Facility (NIF) measures time resolved gamma rays released from inertial confinement fusion experiments by converting emitted gamma rays into Cherenkov light. Imploded capsules have a bright 4.4 MeV gamma ray from fusion neutrons inelastically scattering with carbon atoms in the remaining ablator. The strength of 4.4 MeV gamma ray line is proportional to the capsule’s carbon ablator areal density and can be used to understand the dynamics and energy budget of a carbon-based ablator capsule implosion. Historically, the GRH’s four gas cells use the energy thresholding from the Cherenkov process to forward fit an estimation of the experiment’s complete gamma ray spectrum by modeling the surrounding environment in order to estimate the 4.4 MeV neutron induced carbon gamma ray signal. However, the high number of variables, local minima and uncertainties in detector sensitivities and relative timing had prevented routine use of the forward fit to generate carbon areal density measurements. A new, more straightforward, process of direct subtraction of deconvolved signals was developed to simplify the extraction of the carbon areal density. Beryllium capsules are used as a calibration to measure a capsule environment with no carbon signal. This is then used to appropriately subtract and isolate the carbon signal on shots with carbon ablators. The subtraction algorithm achieves good results across all major capsule campaigns, achieving similar results to the forward fit. This method is now used routinely to measure carbon areal density for NIF shots.

47 OTHER INSTRUMENTATION↗

Progress on observations of interspecies ion separation in inertial-confinement-fusion implosions via imaging x-ray spectroscopy

We report on the analyses of x-ray-imaging spectroscopy data from experiments to study interspecies ion separation in direct-drive inertial-confinement-fusion experiments on the Omega laser facility. This is a continuation of recent, related research [S. C. Hsu et al., Euro Phys. Lett. 115, 65001 (2016); T. R. Joshi et al., Phys. Plasmas 24, 056305 (2017)]. The targets were argon (Ar)-doped, deuterium (D2)-filled spherical plastic shells of varying D2-Ar relative and total gas pressures. We used a time- and space-integrated spectrometer, streaked crystal spectrometer, and up to three time-gated multi-monochromatic x-ray imagers (MMIs) fielded along different lines of sight to record x-ray spectral features obtained from the implosions. The MMI data were recorded between first-shock convergence and slightly before the neutron bang time. We confirm the presence of interspecies ion separation as reported in our recent work. Extensions to the previous work include (a) the inclusion of shell mix in the data analysis, which slightly changes the amount of inferred species separation, (b) observation of species separation closer to the neutron bang time, and (c) fielding of the particle x-ray temporal diagnostic (PXTD) [H. Sio et al., Rev. Sci. Instrum. 87, 11D701 (2016)] to infer the relative timing between the neutron bang time and peak x-ray emission. Experimentally inferred species separation is compared with radiation-hydrodynamic simulations that include a multi-ion-species transport model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Making inertial confinement fusion models more predictive

Computer models of inertial confinement fusion (ICF) implosions play an essential role in experimental design and interpretation as well as our understanding of fundamental physics under the most extreme conditions that can be reached in the laboratory. Building truly predictive models is a significant challenge, with the potential to greatly accelerate progress to high yield and ignition. One path to more predictive models is to use experimental data to update the underlying physics in a way that can be extrapolated to new experiments and regimes. We describe a statistical framework for the calibration of ICF simulations using data collected at the National Ignition Facility (NIF). We perform Bayesian inferences for a series of laser shots using an approach that is designed to respect the physics simulation as much as possible and then build a second model that links the individual-shot inferences together. We show that this approach is able to match multiple X-ray and neutron diagnostics for a whole series of NIF “BigFoot” shots. Within the context of 2D radiation hydrodynamic simulations, our inference strongly favors a significant reduction in fuel compression over other known degradation mechanisms (namely, hohlraum issues and engineering perturbations). This analysis is expanded using a multifidelity technique to pick fuel-ablator mix from several candidate causes of the degraded fuel compression (including X-ray preheat and shock timing errors). Finally, we use our globally calibrated model to investigate the extra laser drive energy that would be required to overcome the inferred fuel compression issues in NIF BigFoot implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interpreting the electron temperature inferred from x-ray continuum emission for direct-drive inertial confinement fusion implosions on OMEGA

In this paper, we present a theoretical framework for interpreting the hot-spot electron temperature ($T_e$) inferred from hard (10- to 20-keV) x-ray continuum emission for inertial confinement fusion implosions on OMEGA. We first show that the inferred $T_e$ represents the emission-weighted, harmonic mean of the hot-spot $T_e$ distribution, both spatially and temporally. A scheme is then provided for selecting a photon energy of which the emission weighting approximates neutron weighting. Simulations are then used to quantify the predicted relationship between the inferred T e , neutron-weighted T i , and implosion performance on OMEGA. In an ensemble of 1-D simulations, it was observed that hot-spot thermal nonequilibrium precluded a sufficiently unique mapping between the inferred $T_e$ and neutron-weighted T i . In 3-D simulations with low-harmonic-mode perturbations (i.e., laser beam power imbalance, target offset, and beam port geometry departures from spherical symmetry) and laser imprint (1 max = 200).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Density determination of the thermonuclear fuel region in inertial confinement fusion implosions

Understanding of the thermonuclear burn in an inertial confinement fusion implosion requires knowledge of the local deuterium–tritium (DT) fuel density. Neutron imaging of the core now provides this previously unavailable information. Two types of neutron images are required. The first is an image of the primary 14-MeV neutrons produced by the D +T fusion reaction. The second is an image of the 14-MeV neutrons that leave the implosion hot spot and are downscattered to lower energy by elastic and inelastic collisions in the fuel. These neutrons are measured by gating the detector to record the 6–12 MeV neutrons. Using the reconstructed primary image as a nonuniform source, a set of linear equations is derived that describes the contribution of each voxel of the DT fuel region to a pixel in the downscattered image. Using the measured intensity of the 14-MeV neutrons and downscattered images, the set of equations is solved for the density distribution in the fuel region. The method is validated against test problems and simulations of high-yield implosions. The calculated DT density distribution from one experiment is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of the energy distribution of electrons escaping confinement from an electron cyclotron resonance ion source

Production of high charge state ions in electron cyclotron resonance ion sources (ECRISs) is dependent on the electron energy distribution (EED) within the source plasma. In order to better understand the EED, a measurement of electrons escaping axially from an ECRIS device has been performed at the National Superconducting Cyclotron Laboratory. Electrons were measured escaping from the Superconducting Source for Ions, driven at 18 GHz. Dependencies of the observed EED on the confining magnetic field strength and injected microwave power are reported. This paper focuses on large peaks of electrons in the 400–1200 keV energy range. Measurements of the axial bremsstrahlung spectrum have been simultaneously carried out to provide a direct comparison between both techniques. A comparison between the energy associated with the peak of the electron distribution and the spectral temperature of the bremsstrahlung distribution is shown.

47 OTHER INSTRUMENTATION↗

Non-standing spin-waves in confined micrometer-sized ferromagnetic structures under uniform excitation

A non-standing characteristic of directly imaged spin-waves in confined micrometer-sized ultrathin Permalloy (Ni 80 Fe 20 ) structures is reported along with evidence of the possibility to alter the observed state by modifications to the sample geometry. Using micromagnetic simulations, the presence of the spin-wave modes excited in the Permalloy stripes along with the quasi-uniform modes was observed. The predicted spin-waves were imaged in direct space using time resolved scanning transmission x-ray microscopy, combined with a ferromagnetic resonance excitation scheme (STXM-FMR). STXM-FMR measurements revealed a non-standing characteristic of the spin-waves. Also, it was shown by micromagnetic simulations and confirmed using STXM-FMR results that the observed characteristic of the spin-waves can be influenced by the local magnetic fields in different sample geometries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of stalk on directly driven inertial confinement fusion implosions

Low-mode asymmetries have emerged as one of the primary challenges to achieving high-performing inertial confinement fusion (ICF) implosions. In direct-drive ICF, an important potential seed of such asymmetries is the capsule stalk mount, the impact of which has remained a contentious question. In this paper, we describe the results from an experiment on the OMEGA laser with intentional offsets at varying angles to the capsule stalk mount, which clearly demonstrates the impact of the stalk mount on implosion dynamics. The angle between stalk and offset is found to significantly impact observables. Specifically, a larger directional flow is observed in neutron spectrum measurements when the offset is toward rather than away from the stalk, while an offset at 42° to the stalk gives minimal directional flow but still generates a large flow field in the implosion. No significant directional flow is seen due to stalk only. Time-integrated x-ray images support these flow observations. A trend is also seen in implosion yield, with lower yield obtained for offsets with a smaller angle than with a larger angle toward the stalk. Radiation hydrodynamic simulations using 2D DRACO and 2D/3D Chimera not including the stalk mount and using 2D xRAGE including the stalk mount are brought to bear on the data. The yield trend, the minimal directional flow with stalk only, and the larger flow enhancement observed with the offset toward the stalk are all reproduced in the xRAGE simulations. Finally, the results strongly indicate that the stalk impact must be considered and mitigated to achieve high-performing implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of sheared E × B flow in self-organized, improved confinement states in magnetized plasmas

A great scientific success story of magnetic fusion research in the past several decades is the theoretical development and experimental testing of the process of turbulence decorrelation and stabilization by sheared E×B flow which shows that E×B shear effects are ubiquitous in magnetized plasmas. This concept of turbulence decorrelation and stabilization has the universality needed to explain the H-mode edge transport barriers seen in limiter and divertor tokamaks, stellarators, and mirror machines; the broader edge transport barrier seen in VHmode plasmas; and the core transport barriers formed in tokamaks. Similar effects are seen in linear devices. These examples of confinement improvement are of considerable physical interest; it is not often that a system self-organizes to reduce transport when an additional source of free energy is applied to it. The transport decrease associated with E×B velocity shear is also of great practical benefit to fusion research, since it contributed to substantially increased fusion yield in all DT magnetic fusion experiments conducted to date. The fundamental physics involved in transport reduction is the effect of E×B shear on the growth, radial extent, and phase correlation of turbulent eddies in the plasma. The same basic transport reduction process can be operational in various portions of the plasma because there are a number of ways to change the radial electric field Er. An important secondary theme in this area is the synergistic effect of E×B velocity shear and magnetic shear. Although the E×B velocity shear appears to have an effect on broader classes of microturbulence, magnetic shear can mitigate some potentially harmful effects of E×B velocity shear and facilitate turbulence stabilization. Our present understanding in this area is the result of a multi-decade, intertwined effort in theory, modeling and diagnostic development combined with continuing experimental investigations. These experiments have clearly demonstrated that increased E×B shear causes reductions in turbulence and transport. Finally, the experimental findings are generally consistent with the basic theoretical models although considerable work remains to be done before we have a fully predictive theory of transport in magnetized plasmas including E×B shear effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗