Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conducting structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Structural, optical and electrical properties of CdS–polyaniline Langmuir–Blodgett films

Structural, optical and electrical properties study of the cadmium sulphide (CdS) incorporated polyaniline (PANI) thin films with varying layers have been carried out. It is seen that layer variation enhances the particle mean sizes with quenching of photoluminescence and an increase in rectifying nature of current-voltage measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fatigue damage evaluation of austenitic stainless steel using nonlinear ultrasonic waves in low cycle regime

The interrupted low cycle fatigue test of austenitic stainless steel was conducted and the dislocation structure and fatigue damage was evaluated subsequently by using both transmission electron microscope and nonlinear ultrasonic wave techniques. A “mountain shape” correlation between the nonlinear acoustic parameter and the fatigue life fraction was achieved. This was ascribed to the generation and evolution of planar dislocation structure and nonplanar dislocation structure such as veins, walls, and cells. The “mountain shape” correlation was interpreted successfully by the combined contribution of dislocation monopole and dipole with an internal-stress dependent term of acoustic nonlinearity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure, magnetic, and transport properties of epitaxial ZnFe{sub 2}O{sub 4} films: An experimental and first-principles study

We investigated the structure, magnetic, and transport properties of ZnFe{sub 2}O{sub 4} (ZFO) by both experimental and first-principles study. The epitaxial ZFO films prepared with various oxygen partial pressures show clear semiconducting behavior and room-temperature ferrimagnetism. A large magnetoresistance of −21.2% was observed at 75 K. The room-temperature ferrimagnetism is induced by the cation disordering. The calculated results indicate that under cation disordering, the ZFO with various oxygen vacancies is a half-metal semiconductor with both possible positive and negative signs of the spin polarization, while ZFO with no oxygen vacancies is an insulator and can be acted as the spin filter layer in spintronic devises.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comprehensive magnetotransport characterization of two dimensional electron gas in AlGaN/GaN high electron mobility transistor structures leading to the assessment of interface roughness

Magnetotransport in two distinct AlGaN/GaN HEMT structures grown by Molecular Beam Epitaxy (MBE) on Fe-doped templates is investigated using Shubnikov de-Haas Oscillations in the temperature range of 1.8–6 K and multicarrier fitting in the temperature range of 1.8–300 K. The temperature dependence of the two dimensional electron gas mobility is extracted from simultaneous multicarrier fitting of transverse and longitudinal resistivity as a function of magnetic field and the data is utilized to estimate contribution of interface roughness to the mobility and the corresponding transport lifetime. The quantum scattering time obtained from the analysis of Shubnikov de Haas Oscillations in transverse magnetoresistance along with the transport lifetime time were used to estimate interface roughness amplitude and lateral correlation length. The results indicate that the insertion of AlN over layer deposited prior to the growth of GaN base layer on Fe doped GaN templates for forming HEMT structures reduced the parallel conduction but resulted in an increase in interface roughness.

36 MATERIALS SCIENCE↗

Influence of sputtering power on the optical properties of ITO thin films

Tin doped indium oxide films are widely used in transparent conducting coatings such as flat panel displays, crystal displays and in optical devices such as solar cells and organic light emitting diodes due to the high electrical resistivity and optical transparency in the visible region of solar spectrum. The deposition parameters have a commendable influence on the optical and electrical properties of the thin films. In this study, ITO thin films were prepared by RF magnetron sputtering. The properties of the films prepared under varying sputtering power were compared using UV- visible spectrophotometry. Effect of sputtering power on the energy band gap, absorption coefficient and refractive index are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemiresistive gas sensors employing solution-processed metal oxide quantum dot films

We report low-temperature chemiresistive gas sensors based on tin oxide colloidal quantum dots (CQDs), in which the benefits of CQDs such as extremely small crystal size, solution-processability, and tunable surface activity are exploited to enhance the gas-sensing effect. The sensor fabrication is simply employing spin-coating followed by a solid-state ligand exchange treatment at room temperature in air ambient. The optimal gas sensor exhibited rapid and significant decrease in resistance upon H{sub 2}S gas exposure when operated at 70 °C, and it was fully recoverable upon gas release. We observed a power law correlation between the sensor response and H{sub 2}S gas concentration, and the sensing mechanism was discussed using the completely depletion model with a flat band diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrostatic force microscopy and electrical isolation of etched few-layer graphene nano-domains

Nanostructured bi-layer graphene samples formed through catalytic etching are investigated with electrostatic force microscopy. The measurements and supporting computations show a variation in the microscopy signal for different nano-domains that are indicative of changes in capacitive coupling related to their small sizes. Abrupt capacitance variations detected across etch tracks indicates that the nano-domains have strong electrical isolation between them. Comparison of the measurements to a resistor-capacitor model indicates that the resistance between two bi-layer graphene regions separated by an approximately 10 nm wide etch track is greater than about 1×10{sup 12} Ω with a corresponding gap resistivity greater than about 3×10{sup 14} Ω⋅nm. This extremely large gap resistivity suggests that catalytic etch tracks within few-layer graphene samples are sufficient for providing electrical isolation between separate nano-domains that could permit their use in constructing atomically thin nanogap electrodes, interconnects, and nanoribbons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A study of transport properties in Cu and P doped ZnSb

ZnSb samples have been doped with copper and phosphorus and sintered at 798 K. Electronic transport properties are interpreted as being influenced by an impurity band close to the valence band. At low Cu dopant concentrations, this impurity band degrades the thermoelectric properties as the Seebeck coefficient and effective mass are reduced. At carrier concentrations above 1 × 10{sup 19 }cm{sup −3}, the Seebeck coefficient in Cu doped samples can be described by a single parabolic band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High pressure study of B{sub 12}As{sub 2}: Electrical transport behavior and the role of grain boundaries

Using a diamond anvil cell, the evolutions of alternate-current impedance spectra and direct- current resistivity in B{sub 12}As{sub 2} have been investigated up to 51.9 GPa. The results provide evidence for the existence of grain and grain boundary effects that are separated in the frequency region. The grain boundary resistance shows a relatively smaller contribution to the total resistance above 16.8 GPa. By using the double-Schottky barrier model, the space charge potential was obtained. A pressure-induced inversion of charge defect concentration in the space charge layer was found at 20.7 GPa. The high-temperature resistivity measurements indicate that the transport activation energy is determined by defect energy levels in the band gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing effects on the ferromagnetic resonance linewidths of sputter-deposited Fe{sub 100−x}Co{sub x}(001) thin films (x < 11)

Effects of post-growth annealing on the magnetic damping of 3d transition alloy thin films were investigated. Fe{sub 100−x}Co{sub x} (x < 11 at. %) thin films were epitaxially deposited on GaAs(001) substrates by rf magnetron sputtering, and some of them were annealed without exposing to atmosphere. Electrical measurement showed that in-plane resistivity was smaller in the annealed films than in the as-deposited ones, indicating that the annealing mitigates crystalline imperfections and leads to reduced electron scattering rates. Magnetic damping was evaluated by the peak widths of ferromagnetic resonance (FMR) spectra obtained by a conventional Q-band spectrometer. Comparison of as-deposited and annealed specimens showed that the damping was decreased by annealing. Combined with the electrical and FMR measurements, these observations are consistent with the theoretical predictions that crystalline imperfections strongly influence the magnetic damping, both in intrinsic and extrinsic origins.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the magnetic property of vacancy-defected graphyne by transition metal absorption

In this work, we demonstrate a novel and simple approach to tune the electronic properties as well as magnetic properties of transition metal absorbed in vacancy-defected graphyne (VGY). A double vacancy has been introduced in the graphyne unit and TM atoms (V-Cu) are systematically doped in the vacant site. We find that combination of these two give rise to some interesting spintronics properties such as half-metalicity, and spin-select half-semiconductivity. Furthermore, the magnetic moments of TM absorbed vacancy-defected graphyne are found to be higher compare to TM absorbed graphyne. Although Ni absorbed graphyne is nonmagnetic in nature, we find that the Ni absorbed VGY behaves as half metal with a net magnetic moment of 2 µ{sub B} and can be used as spin filter. Thus, the TM absorbed vacancy-defected graphyne are more suitable candidate for magneto-optics and spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning giant anomalous Hall resistance ratio in perpendicular Hall balance

Anomalous Hall effect at room temperature in perpendicular Hall balance with a core structure of [Pt/Co]{sub 4}/NiO/[Co/Pt]{sub 4} has been tuned by functional CoO layers, where [Pt/Co]{sub 4} multilayers exhibit perpendicular magnetic anisotropy. A giant Hall resistance ratio up to 69 900% and saturation Hall resistance (R{sub S}{sup P}) up to 2590 mΩ were obtained in CoO/[Pt/Co]{sub 4}/NiO/[Co/Pt]{sub 4}/CoO system, which is 302% and 146% larger than that in the structure without CoO layers, respectively. Transmission electron microscopy shows highly textured [Co/Pt]{sub 4} multilayers and oxide layers with local epitaxial relations, indicating that the crystallographic structure has significant influence on spin dependent transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relationship between transport properties and band diagrams in InAs{sub x}Sb{sub 1−x}/Al{sub 0.1}In{sub 0.9}Sb quantum wells

The resistivity of InAs{sub 0.1}Sb{sub 0.9}/Al{sub 0.1}In{sub 0.9}Sb quantum wells (QWs) is much lower than that of InSb/Al{sub 0.1}In{sub 0.9}Sb QWs, staying low resistivity even at low temperature. Fundamental difference in low temperature transport properties between InSb/Al{sub 0.1}In{sub 0.9}Sb and InAs{sub 0.1}Sb{sub 0.9}/Al{sub 0.1}In{sub 0.9}Sb QWs was revealed, based on the band diagram calculations of these QWs. Band diagrams of InAs{sub x}Sb{sub 1−x}/Al{sub 0.1}In{sub 0.9}Sb QWs showed that the energy band of the InAs{sub x}Sb{sub 1−x} layer moves downward with increasing As content x. The QW is type I at x equal to 0, becomes type II at x equal to 0.1. The Fermi level (E{sub F}) of the InSb QWs lies in the band gap and below apart from the bottom of the conduction band, while E{sub F} of the InAs{sub 0.1}Sb{sub 0.9} QWs is above the bottom of the conduction band of the well. The calculated sheet carrier densities are in good agreement with the experimental results. It well explains that the sheet carrier density difference between InSb and InAs{sub 0.1}Sb{sub 0.9} QWs mainly originates from this band diagram difference and the position of E{sub F}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Trap modulated photoresponse of InGaN/Si isotype heterojunction at zero-bias

n-n isotype heterojunction of InGaN and bare Si (111) was formed by plasma assisted molecular beam epitaxy without nitridation steps or buffer layers. High resolution X-ray diffraction studies were carried out to confirm the formation of epilayers on Si (111). X-ray rocking curves revealed the presence of large number of edge threading dislocations at the interface. Room temperature photoluminescence studies were carried out to confirm the bandgap and the presence of defects. Temperature dependent I-V measurements of Al/InGaN/Si (111)/Al taken in dark confirm the rectifying nature of the device. I-V characteristics under UV illumination, showed modest rectification and was operated at zero bias making it a self-powered device. A band diagram of the heterojunction is proposed to understand the transport mechanism for self-powered functioning of the device.

36 MATERIALS SCIENCE↗

Nonlinear terahertz response of HgTe/CdTe quantum wells

Without breaking the topological order, HgTe/CdTe quantum wells can have two types of bulk band structure: direct gap type (type I) and indirect gap type (type II). We report that the strong nonlinear optical responses exist in both types of bulk states under a moderate electric field in the terahertz regime. Interestingly, for the type II band structure, the third order conductivity changes sign when chemical potentials lies below 10 meV due to the significant response of the hole excitation close to the bottom of conduction band. Negative nonlinear conductivities suggest that HgTe/CdTe quantum wells can find application in the gain medium of a laser for terahertz radiation. The thermal influences on nonlinear optical responses of HgTe/CdTe quantum wells are also studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evidence of quantum correction to conductivity and variable range hopping conduction in nano-crystalline Cu{sub 3}N thin film

We have investigated the temperature dependent carrier transport properties of nano-crystalline copper nitride thin films synthesized by modified activated reactive evaporation. The films, prepared in a Cu-rich growth condition are found to be highly disordered and the carrier transport in these films is mainly attributed to the impurity band conduction. We have observed that no single conduction mechanism is appropriate to elucidate the carrier transport in the entire temperature range of 20 – 300 K. Therefore, we have employed different conduction mechanisms in different temperature regimes. The carrier transport of the films in the low temperature regime (20 – 150 K) has been interpreted by implementing quantum correction to the conductivity. In the high temperature regime (200 – 300 K), the conduction mechanism has been successfully analyzed on the basis of Mott’s variable range hopping mechanism. Furthermore, it can be predicted that copper ions present at the surface of the crystallites are responsible for the hopping conduction mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Band alignment of TiO{sub 2}/FTO interface determined by X-ray photoelectron spectroscopy: Effect of annealing

The energy band alignment between pulsed-laser-deposited TiO{sub 2} and FTO was firstly characterized using high-resolution X-ray photoelectron spectroscopy. A valence band offset (VBO) of 0.61 eV and a conduction band offset (CBO) of 0.29 eV were obtained across the TiO{sub 2}/FTO heterointerface. With annealing process, the VBO and CBO across the heterointerface were found to be -0.16 eV and 1.06 eV, respectively, with the alignment transforming from type-I to type-II. The difference in the band alignment is believed to be dominated by the core level down-shift of the FTO substrate, which is a result of the oxidation of Sn. Current-voltage test has verified that the band alignment has a significant effect on the current transport of the heterojunction.

36 MATERIALS SCIENCE↗

High performance of SDC and GDC core shell type composite electrolytes using methane as a fuel for low temperature SOFC

Nanocomposites Samarium doped Ceria (SDC), Gadolinium doped Ceria (GDC), core shell SDC amorphous Na{sub 2}CO{sub 3} (SDCC) and GDC amorphous Na{sub 2}CO{sub 3} (GDCC) were synthesized using co-precipitation method and then compared to obtain better solid oxide electrolytes materials for low temperature Solid Oxide Fuel Cell (SOFCs). The comparison is done in terms of structure, crystallanity, thermal stability, conductivity and cell performance. In present work, XRD analysis confirmed proper doping of Sm and Gd in both single phase (SDC, GDC) and dual phase core shell (SDCC, GDCC) electrolyte materials. EDX analysis validated the presence of Sm and Gd in both single and dual phase electrolyte materials; also confirming the presence of amorphous Na{sub 2}CO{sub 3} in SDCC and GDCC. From TGA analysis a steep weight loss is observed in case of SDCC and GDCC when temperature rises above 725 °C while SDC and GDC do not show any loss. The ionic conductivity and cell performance of single phase SDC and GDC nanocomposite were compared with core shell GDC/amorphous Na{sub 2}CO{sub 3} and SDC/ amorphous Na{sub 2}CO{sub 3} nanocomposites using methane fuel. It is observed that dual phase core shell electrolytes materials (SDCC, GDCC) show better performance in low temperature range than their corresponding single phase electrolyte materials (SDC, GDC) with methane fuel.

36 MATERIALS SCIENCE↗