Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computational environment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Impingement of a Supercritical Carbon Dioxide Jet on a Planar Surface

A laminar slot jet of supercritical CO2 entering a supercritical CO2 ambient environment is simulated with a computational fluid dynamics package using incorporating a thermodynamically consistent equation of state and high-fidelity transport coefficient models. For a jet at 8 MPa, at a temperature varying from 600 to 1000 K, entering an ambient at 8 MPa and a temperature of 1000 K, the flow structure is sensitive to the difference in operating temperature. Because there is very little heat transfer to the core of the jet, these results may be caused by both the density difference in the fluids, and momentum and heat transfer at the edge of the jet.

42 ENGINEERING↗

Predicted trapped particle radiation levels for Tiros-N

Vehicle encountered electron and proton fluxes were calculated for a set of nominal TIROS-N trajectories with new computational methods and new electron environment models. Temporal variations in the electron data were considered and partially accounted for. Estimates of energetic solar proton fluxes are given for the lifetime of the satellite at selected integral energies from 10 to 100 MeV. Field strength calculations were performed with an extrapolated model on the basis of linear secular variation predictions. Orbital flux integration results are presented in graphical and tabular form.

Stassinopoulos, E. G.↗

Radiation hazards to synchronous satellites: The IUE (SAS-D) mission

The ambient trapped particle fluxes incident on the IUE (SAS-D) satellite were studied. Several synchronous elliptical and circular flight paths were evaluated and the effect of inclination, eccentricity, and parking longitude on vehicle encountered intensities was investigated. Temporal variations in the electron environment were considered and partially accounted for. Magnetic field calculations were performed with a current field model extrapolated to a later epoch with linear time terms. Orbital flux integrations were performed with the latest proton and electron environment models using new improved computational methods. The results are presented in graphical and tabular form; they are analyzed, explained, and discussed. Estimates of energetic solar proton fluxes are given for a one year mission at selected integral energies ranging from 10 to 100 MeV, calculated for a year of maximum solar activity during the next solar cycle.

Stassinopoulos, E. G.↗

Radiation environment for ATS-F

The ambient trapped particle fluxes incident on the ATS-F satellite were determined. Several synchronous circular flight paths were evaluated and the effect of parking longitude on vehicle encountered intensities was investigated. Temporal variations in the electron environment were considered and partially accounted for. Magnetic field calculations were performed with a current field model extrapolated to a later epoch with linear time terms. Orbital flux integrations were performed with the latest proton and electron environment models using new improved computational methods. The results are presented in graphical and tabular form; they are analyzed, explained, and discussed. Estimates of energetic solar proton fluxes are given for a one year mission at selected integral energies ranging from 10 to 100 Mev, calculated for a year of maximum solar activity during the next solar cycle.

Stassinopoulos, E. G.↗

Monte Carlo variance reduction

Computer program incorporates technique that reduces variance of forward Monte Carlo method for given amount of computer time in determining radiation environment in complex organic and inorganic systems exposed to significant amounts of radiation.

Byrn, N. R.↗

A comparison of adiabatic and kinematic vertical motions using mesoscale data

Results are compared from the adiabatic and kinematic methods of determining vertical motion during a period of severe convective storms when special meso alpha-scale rawinsonde data were available. The two procedures were tested using data from the first regional-scale day of AVE-SESAME '79 which coincided with the Red River Valley tornado outbreak of April 10-11, 1979. At 700 mb, each technique showed good agreement with the weather patterns, but the kinematic procedure gave superior results at 500 mb. The overall goodness of the adiabatic method during this particular case was not solely due to the high-resolution SESAME data since synoptic-scale mechanisms played a major role in creating a storm-conducive environment. With the advent of computer aided analysis systems such as AFOS, forecasters will have quicker access to a greater variety of information. Present results suggest that the adiabatic method can yield useful information for severe storm forecasters, especially in the lower troposphere. An interesting follow-on study would use sounding data from geostationary VAS satellites to compute adiabatic vertical motions at finer time and space resolutions than is now possible using RAOB data alone. Geostrophic winds derived from satellite thermal data probably can be used.

Fuelberg, H. E.↗

Assessing photovoltaic module degradation and lifetime from long term environmental tests

The photovoltaic module failure mechanisms related to temperature, humidity, and electrical bias are analyzed using the data collected over a period of 20 years from various sites in the U.S. The approach is based on measuring the rate dependence of the mechanisms on site stress levels, and then using the rate data to analytically estimate the field life by means of computer models of the site environment. A correlation is established between the accelerated constant-stress testing and the time-varying field exposures. Test results are presented for two failure mechanisms for a module design featuring polyvinyl butyral encapsulant for the temperature range of 85 to 100 C and 85-percent relative humidity.

Otth, D. H.↗

Soviet Space Stations as Analogs, Second Edition

The available literature that discusses the various aspects of the Soviet Salyut 6 and Salyut 7 space staions are examined as related to human productivity. The methodology for this analog was a search of unclassified literature. Additional information was obtained in interviews with the cosmonauts and some Soviet space personnel. Topics include: general layout and design of the spacecraft system; cosmonauts role in maintenance and repair; general layout and design of the Mir complex; effects of the environment on personnel; information and computer systems; organization systems; personality systems; and physical conditin of the cosmonaut.

Bluth, B. J.↗

An evaluation of Turbo Prolog with an emphasis on its application to the development of expert systems

Turbo Prolog is a recently available, compiled version of the programming language Prolog. Turbo Prolog is designed to provide not only a Prolog compiler, but also a program development environment for the IBM Personal Computer family. An evaluation of Turbo Prolog was made, comparing its features to other versions of Prolog and to the community of languages commonly used in artificial intelligence (AI) research and development. Three programs were employed to determine the execution speed of Turbo Prolog applied to various problems. The results of this evaluation demonstrated that Turbo Prolog can perform much better than many commonly employed AI languages for numerically intensive problems and can equal the speed of development languages such as OPS5+ and CLIPS, running on the IBM PC. Applications for which Turbo Prolog is best suited include those which (1) lend themselves naturally to backward-chaining approaches, (2) require extensive use of mathematics, (3) contain few rules, (4) seek to make use of the window/color graphics capabilities of the IBM PC, and (5) require linkage to programs in other languages to form a complete executable image.

Loftin, Richard B.↗

Evaluation of the pseudo pilot effect on baseline controller study data

The Baseline Controller Study requires the support of pseudo pilots who input computer commands in response to air data in a simulated environment. Errors committed either by pseudo pilots, or by the computer's failure to accept commands, can result in data that is not representative of controller capabilities. Therefore, it became necessary to evaluate the actions of the pseudo pilots and determine what effect, if any, those actions had upon a given set of baseline data. The Pseudo Pilot Stations (PPS) associated with the Baseline Controller Study are user unfriendly. This fact, coupled with the human factor of the pilots themselves, required exploration of the degree the pseudo pilot's actions affected the subject air traffic controller actions during the collection of baseline data. Examination of the preliminary data collected by the Basline Controller Study subjectively determined that pseudo pilot actions do, indeed, affect the the research data. Further study is needed to quantify that affect and, perhaps, assign a value to the pseudo pilot factor rather than merely decide which simulations are valid and which are not.

Newcomb, Linda C.↗

A modified VAPEPS method for predicting vibroacoustic response of unreinforced mass loaded honeycomb panels

VAPEPS (VibroAcoustic Payload Environment Prediction System) is a computer program used to predict the vibroacoustic response of a structure. An alternate VAPEPS modeling technique, the Modified NASA Lewis Method, is an improvement for modeling unreinforced mass loaded honeycomb panels. The Modified NASA Lewis Method prediction is compared to the standard ASMS VAPEPS prediction, and the acoustic test data for three spacecraft panels. An analytical method of computing variance is presented and used to compute 95 percent confidence levels. These levels are compared to the standard VAPEPS confidence levels and to the envelope of the test data. As a result of using the new methodology suggested in the paper, both the mean prediction and the 95 percent confidence level prediction agree well with the test data in both spectral shape and magnitude. Therefore, the Modified NASA Lewis Method prediction methodology may be used to define more realistic random vibration test levels.

Mcnelis, Mark E.↗

Early tether dynamics flight experiments

This paper proposes an evolutionary series of tether-dynamics flight experiments using the Small Expendable Deployer System (SEDS). Such experiments could be launched as secondary payloads on the Delta ELV. The purpose of the series of experiments is to acquire data on tether deployment rate, tension, tether shape, and operating environment to compared with computer-based tether simulations. A second purpose is to serve as a precursor for the Orbiter-based SEDS, since both the tether deployer and the flight profile are similar. Additional flights could observe tether dynamics over a much wider range of operational and environmental conditions and could employ more comprehensive measurements.

Rupp, Charles C.↗

A modified VAPEPS method for predicting vibroacoustic response of unreinforced mass loaded honeycomb panels

VAPEPS (vibroAcoustic Payload Environment Prediction System) is a computer program used to predict the vibroacoustic response of a structure. An alternate VAPEPS modeling technique, the Modified NASA Lewis Method, is an improvement for modeling unreinforced mass loaded honeycomb panels. The Modified NASA Lewis Method prediction is compared to the standard ASMS VAPEPS prediction, and the acoustic test data for three spacecraft panels. An analytical method of computing variance is presented and used to compute 95 percent confidence levels. These levels are compared to the standard VAPEPS confidence levels and to the envelope of the test data. As a result of using the new methodology suggested in the paper, both the mean prediction and the 95 percent confidence level prediction agree well with the test data in both spectral shape and magnitude. Therefore, the Modified NASA Lewis Method prediction methodology may be used to define more realistic random vibration test levels.

Mcnelis, Mark E.↗

System For Research On Multiple-Arm Robots

Kali system of computer programs and equipment provides environment for research on distributed programming and distributed control of coordinated-multiple-arm robots. Suitable for telerobotics research involving sensing and execution of low level tasks. Software and configuration of hardware designed flexible so system modified easily to test various concepts in control and programming of robots, including multiple-arm control, redundant-arm control, shared control, traded control, force control, force/position hybrid control, design and integration of sensors, teleoperation, task-space description and control, methods of adaptive control, control of flexible arms, and human factors.

Backes, Paul G.↗

SEPAC data analysis in support of the environmental interaction program

The main objective is to conduct data analyses of SEPAC data and computer modeling to investigate spacecraft environment effects associated with injection of electron beam, plasma clouds, and neutral gas clouds from the Shuttle Orbiter. To understand the dependence of spacecraft charging potential on beam density and other plasma parameters, a two dimensional electrostatic particle code was used to simulate the injection of electron beams from an infinite conductor into a plasma. The ionization effects on spacecraft charging are examined by including interactions of electrons with neutral gases. A survey of the simulation results is presented and discussed.

Lin, C. S.↗

Thermal-Radiation Program

Thermal Radiation Analyzer System (TRASYS) computer program is software program having generalized capability to solve equations of radiation-related aspects of thermal-analysis problems. Computes total thermal-radiation environment for spacecraft in orbit. Software calculates internode-radiation-interchange data as well as data on rates of incidence and absorption of heat originating from environmental radiant sources. Provides data of both types in format directly usable by such thermal-analyzer programs as SINDA '85/FLUINT (available from COSMIC, program number MSC-21528). CRAY version of TRASYS (P25) written in FORTRAN 77. Other versions available upon request.

Anderson, Gordon↗

Evaluation and recommendations for work group integration within the Materials and Processes Lab

The goal of this study was to evaluate and make recommendations for improving the level of integration of several work groups within the Materials and Processes Lab at the Marshall Space Flight Center. This evaluation has uncovered a variety of projects that could improve the efficiency and operation of the work groups as well as the overall integration of the system. In addition, this study provides the foundation for specification of a computer integrated manufacturing test bed environment in the Materials and Processes Lab.

Farrington, Phillip A.↗