Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK CAPACITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Temperature-Following Thermal Barrier Coatings for High Efficiency Engines (Final Report)

HRL Laboratories and General Motors (GM), pursued this effort to increase the efficiency of internal combustion engines (ICEs) by developing and implementing temperature-following thermal barrier coatings (TBCs) to decrease heat loss from the combustion chamber. HRL developed microsphere TBCs based on hollow high-temperature alloy spheres with average diameter of 50 μm and wall thickness ~1 μm (microspheres) that achieve unprecedented low thermal conductivity and heat capacity (10X lower than the state of the art) while offering exceptional environmental and mechanical resistance.> In current ICEs, approximately 29% of the fuel’s energy is lost to the cooling system and about 22% goes into moving the car. By limiting heat losses from the combustion chamber with insulating coatings, fuel energy can be redirected into additional piston work and into the exhaust stream. The additional energy that goes into the exhaust stream can be turned into useful work through the use of an exhaust energy recovery device, such as turbocompounding and/or through driving a turbocharger to increase the power density of the engine allowing downsizing. Insulating coatings for piston crowns have been pursued in the past, but previous materials—typically ceramics—exhibited low thermal conductivity but retained high heat capacity. Such materials reduce heat losses but stabilize at a high surface temperature. The high surface temperature heats the incoming gases, which lowers volumetric efficiency and increases propensity for knock, resulting in degraded engine performance. This program developed an innovative new material that combines low thermal conductivity with low heat capacity. These unique properties allow it to follow rapid changes in gas temperature during each combustion cycle. A metallic microsphere TBC has been demonstrated that exhibits increased surface temperature during the combustion period, resulting in reduced heat transfer losses, while still returning to a low surface temperature during the gas exchange period. A 10X lower thermal conductivity and heat capacity than state-of-the-art thermal barrier coatings has been demonstrated. These unprecedented thermal properties are achieved through the coating architecture, which consists of closed pores on the microscale and exhibits a total porosity of 90% to 95%. By selecting a high-temperature nickel alloy as the coating material, the ductility and strength of metals can be harnessed to achieve much better durability and damage tolerance than brittle ceramic coatings can achieve.

33 ADVANCED PROPULSION SYSTEMS↗

Methodology Paper for Upper Cretaceous Sandstone Characterization

The Southeast Regional Carbon Sequestration Partnership’s (SECARB’s) Anthropogenic Test is a demonstration of the deployment of CO 2 capture, transport, geologic storage and monitoring technologies. The capture component of the test takes place at the James M. Barry Electric Generating Plant in Bucks, Alabama. The capture facility utilizes post-combustion amine capture technology licensed from Mitsubishi Heavy Industries America to process flue gas from a coal-fired power unit at Plant Barry. The amount of CO 2 captured using this process is equivalent to the emissions produced when generating 25 megawatts (MW) of electricity. CO 2 captured at the plant is transported by pipeline for underground storage in a saline geologic formation within the Citronelle Dome. This project is one of the first and the largest fully-integrated commercial prototype coal-fired carbon capture and storage projects in the USA. This demonstration is currently in the injection phase, with the capture unit reaching full operational capacity in June of 2011. The project constructed a twelve mile long, 4-inch diameter pipeline to the injection site starting in July 2011. Drilled in January 2011, a deep characterization well provided geologic data confirming that the test site represented an attractive location for safe, long-term storage of CO 2 . Two Class V Experimental Injection Well underground injection control (UIC) permits were issued in November 2011 and subsequently the project’s injection wells were installed. A robust monitoring, verification and accounting (MVA) plan has been developed to monitor and track the CO 2 plume and the associated pressure field. In association with this field demonstration, the project team is also tasked with the continued characterization of this region’s potential storage reservoirs and cap rock formations. This document serves as the SECARB Phase III work product 1.1.a “Methodology Paper for Upper Cretaceous Sandstone Characterization.” This product will summarize the Project Team’s plans for the Phase III assessment of the Upper Cretaceous Sandstone Reservoir’s CO 2 storage capacity.

54 ENVIRONMENTAL SCIENCES↗

Aerobic Capacity Following Long Duration International Spaces Station (ISS) Missions: Preliminary Results

Maximum oxygen uptake (VO2max) is reduced immediately following space flights lasting <15 d, but has not been measured following long-duration missions. The purpose of this study is to measure VO2max and maximum work rate (WRmax) data from astronauts following ISS flights (91 to 188 d). Methods: Five astronauts [3 M, 2 F: 47+/-6 yr, 174+/-6 cm, 71.9+/-10.9 kg (mean +/- SD)] have participated in the study. Subjects performed upright cycle exercise tests to symptom-limited maximum. An initial test was done approx.270 d before flight to establish work rates for subsequent tests. Subsequent tests, conducted approx.45 d before flight and repeated on the first or second day (R+1/2) and at approx.10 d (R+10) following landing, consisted of 3 5 min stages designed to elicit 25%, 50%, and 75% of preflight VO2max, followed by 25 W(dot)/min increases. VO2, WR, and heart rate (HR) were measured using the ISS Portable Pulmonary Function System [Damec, Odense, DK]. Descriptive statistics are reported. Results: On R+1/2 mean VO2max decreased compared to preflight (Pre: 2.98+/-0.99, R+1/2: 2.63+/-0.56 L(dot)/min); 4 of 5 subjects demonstrated a loss of > 6%. WRmax also decreased on R+1/2 compared to preflight (Pre: 245+/-69, R+1/2: 210+/-45 W). On R+10, VO2max was 2.86+/-0.62 L(dot)/min, with 2 subjects still demonstrating a loss of > 6% from preflight. WRmax on R+10 was 240+/-49 W. HRmax did not change from pre to post-flight. Conclusions: These preliminary results, from the first 5 of 12 planned subjects of an ongoing ISS study, suggest that the majority of astronauts will experience a decrease in VO2max after long-duration space-flight. Interestingly, the two astronauts with the highest preflight VO2max had the greatest loss on R+1/2, and the astronaut with the lowest preflight VO2max increased by 13%. Thus, maintenance of VO2max may be more difficult in astronauts who have a high aerobic capacity, perhaps requiring more intense in-flight exercise countermeasure prescriptions.

Moore, Alan D.↗

Suitable low Global Warming Potential (GWP) refrigerants for two-speed Heat Pumps for residential applications based on speed Heat Pumps for residential applications based on simulated performance simulated performance

Cold climate Heat Pumps (CCHPs) using single-speed compressors in tandem have been successfully built and tested to reach its performance metrics with outdoor temperatures as low as -25°C. CCHPs must be designed to alleviate the problems of too high discharge temperatures, low suction pressure and high-pressure ratio at low ambient conditions and insufficient heating capacity relative to the heating capacity at 8.3°C. In this paper we recognize those concerns. Low-GWP refrigerants are screened based on the shape of their T-S saturation boundary. Simulations of the performance of low-GWP refrigerants (R32, R454B, R466A, and R452B) relative to R410A is done using the DOE/ORNL Heat Pump Design Model at the component level. Systemic inefficiency, the root cause of lost work, is addressed by component-level exergy analysis to refine design options. CCHPs using low-GWP refrigerants addresses issues of reducing energy consumption, lowering carbon footprint, and enabling environmentally sustainability. The CCHP was designed to meet a HSPF > 11.0 and SEER > 15.0 having adequate heat pump heating capacity down to -25°C. It is estimated that at least 2.6 million U.S homes using electric furnaces and heat pumps in cold or very old climates with an annual energy consumption of 0.17EJ would benefit by CCHPs.

Ally, Moonis↗

Engineering Nannochloropsis oceanica for the production of diterpenoid compounds

Abstract Photosynthetic microalgae like Nannochloropsis hold enormous potential as sustainable, light‐driven biofactories for the production of high‐value natural products such as terpenoids. Nannochloropsis oceanica is distinguished as a particularly robust host with extensive genomic and transgenic resources available. Its capacity to grow in wastewater, brackish, and sea waters, coupled with advances in microalgal metabolic engineering, genome editing, and synthetic biology, provides an excellent opportunity. In the present work, we demonstrate how N. oceanica can be engineered to produce the diterpene casbene—an important intermediate in the biosynthesis of pharmacologically relevant macrocyclic diterpenoids. Casbene accumulated after stably expressing and targeting the casbene synthase from Daphne genkwa (DgTPS1) to the algal chloroplast. The engineered strains yielded production titers of up to 0.12 mg g −1 total dry cell weight (DCW) casbene. Heterologous overexpression and chloroplast targeting of two upstream rate‐limiting enzymes in the 2‐C‐methyl‐ d ‐erythritol 4‐phosphate pathway, Coleus forskohlii 1‐deoxy‐ d ‐xylulose‐5‐phosphate synthase and geranylgeranyl diphosphate synthase genes, further enhanced the yield of casbene to a titer up to 1.80 mg g −1 DCW. The results presented here form a basis for further development and production of complex plant diterpenoids in microalgae.

Du, Zhi‐Yan↗

Performance investigation of high-speed FSO transmission system under the influence of different atmospheric conditions incorporating 3-D orthogonal modulation scheme

In this paper, we report the modeling and simulative investigation of a free space optics (FSO) transmission system using non-return to zero/differential quadrature phase shift keying/polarization shift keying 3-D orthogonal modulation scheme in which three independent 40 Gb/s data streams are transmitted simultaneously using different signal parameters over the same channel to improve the spectral efficiency of the link. The proposed system demonstrates a successful transmission of 120 Gb/s information over an FSO link range of 25 km with an acceptable bit-error rate (∼10{sup −9}) under clear weather conditions. The performance of the proposed link is also analyzed under the effect of atmospheric turbulence. Further, we compare the performance of the proposed system with previously reported works in the literature and the results demonstrate that the proposed 3-D orthogonal modulation scheme based FSO transmission system performs better in terms of spectral efficiency, information capacity and maximum achievable link distance.

42 ENGINEERING↗

Enhancing the performance of lithium oxygen batteries through combining redox mediating salts with a lithium protecting salt

Li–O 2 batteries have recently emerged to meet nowadays elevated electric energy demands. Redox mediators (RMs) for solution-inducing decomposition of discharge products are one approach to increase energy efficiency and reduce high overpotentials in these batteries. However, multiple obstacles hinder their usage such as redox shuttling, capacity fading, electrolyte degradation, etc. Herein, we present a new chemistry based on a combination of LiNO 3 , TEGDME and an ionic liquid that enables LiI (1 M) to lower the charge potential (3.5V) with a long cycle life of 270 cycles. 0.1 M LiI increases the cyclability up to 500 with a slightly increased charge potential (~4V) for a fixed capacity of 1000 mAh/g. Up to 100 cycles, this battery system retained ~95% Li 2 O 2 capacity with a ~0.8 V charge-discharge polarization gap. The addition of LiNO 3 to the electrolyte provides a protective solid electrolyte interface (SEI) on anode that works in synergy with the LiI RM. Moreover, we found that this electrolyte blend results in domain formation of ionic and neutral species enhancing the discharge and charge processes. Finally, DFT calculations provide a better understanding of the role of the anode SEI layer and the Li 2 O 2 decomposition promoted by the LiI during charge on the cathode.

25 ENERGY STORAGE↗

Separation characteristics of cations and natural organic matter in electrodialysis

Natural organic matter (NOM) in water can cause the formation of disinfection byproducts (DBPs) when NOM reacts with a disinfectant such as chlorine. Nanofiltration (NF) and reverse osmosis (RO) are effective treatment methods to remove NOM. However, the simultaneous presence of both NOM and divalent cations such as Ca 2+ can enhance fouling in NF and RO. Therefore, an appropriate pretreatment to remove such cations before NF or RO would delay fouling and perhaps improve water recovery and NOM removal efficiency. Electrodialysis (ED) is potentially an excellent pretreatment method because it separates inorganic ions well using ion exchange membranes (IEMs) but does not separate NOM well because of its size and consequent low diffusivity. This research focused on ion and NOM separation with ED using three different types of commercially available IEM pairs, two different commercially available NOM sources, and six different influents at 500 mg/L total dissolved solids in the presence or absence of both hardness (Ca 2+ and Mg 2+ ) and NOM. The target waters of interest in this research were drinking water supplies that require little or no desalination but substantial removal of NOM; after NOM separation in NF or RO, some or all of the ED concentrate can be added to the NF/RO permeate to create the finished water prior to disinfection. The results indicate that ED can effectively separate alkaline earth metal ions without separation of NOM. Cation exchange membranes with high exchange capacity, high selectivity for divalent cations are desirable, and both anion and cation exchange membranes should have low affinity for organic adsorption. As a result, the process would work particularly well for NOM with relatively low hydrophobicity, since NOM adsorption to most surfaces increases with hydrophobicity.

36 MATERIALS SCIENCE↗

Aliovalent Anion Incorporation in Halide Na-ion Conductors for Enhanced Ionic Conductivity

Halide-based solid electrolytes (SEs), particularly zirconium (Zr)-centered halides, are attractive from a material cost perspective. Nevertheless, Zr-centered halide SEs are hindered by their low ionic conductivity. Here, in this study, we report on the cubic Na 3 ZrCl 5 S superionic conductor through strategic sulfur anion incorporation, achieving 10 times higher ionic conductivity than that of Na 2 ZrCl 6 . With the optimal composition, the highest ionic conductivity of 0.753 mS cm –1 is obtained for the 0.6Na 2 S–1.4NaCl–ZrCl 4 compound. When paired with a NaCrO 2 cathode, the assembled all-solid-state batteries (ASSBs) achieve a specific discharge capacity of 110 mA h g –1 at 0.1C and exhibit long-term cycling stability at 0.3C at room temperature over 1000 cycles (with 83% capacity retention). Moreover, in situ electrochemical impedance spectroscopy combined with distribution of relaxation times analysis reveal the dynamically interfacial stability between Na halide with electrodes. In conclusion, this work highlights the design and synthesis of advanced halide electrolytes through anion incorporation, paving the way for the development of next-generation ASSBs.

Guo, Xiaolin [Univ. of Louisville, KY (United Stat↗

Disentangling the Effects of Temperature, Moisture, and Substrate Availability on Soil CO 2 Efflux

Soil respiration ($R_s$), the largest carbon emission flux in ecosystems, is usually modeled as an empirically parameterized function of temperature, and sometimes water availability. The likely contribution by other factors, such as carbohydrate substrate supply from photosynthesis, has been recognized, but modeling capacity to use this information is limited. Wavelet transformations of the residuals of a seasonal Q 10 temperature response model indicated structure at different temporal scales. In this work, we hypothesize that this indicates the lack of explicit representation of relevant processes in the models. Using cross-spectral analysis, we found that time series of photosynthetically active radiation explained most of the diurnal variation, temperature, explained variability at multiple time scales (diurnal-synoptic), whereas volumetric soil water content correlated with variability in Rs at scales 15-30 days. The results suggest that the time domains of influence for different driving variables of $R_s$ are discrete, and largely nonoverlapping, and represent functional relationships between soil biological activity and its constraints. Analysis of phase angles showed that $R_s$ lagged photosynthetically active radiation by 1.5-3.0 hr. As this time lag was the same in both young and mature trees, with more than fivefold difference in transport distances, we hypothesize that this finding adds to the body of literature that support the pressure-concentration-wave model of carbohydrate availability in plants.

54 ENVIRONMENTAL SCIENCES↗

The Role of Groundwater Withdrawals on River Regulation: Example From the Columbia River Basin

The Columbia River Basin (CRB) is heavily regulated by more than 250 dams on its river system while depending significantly on groundwater withdrawals in certain sub-basins. Neglecting groundwater withdrawals in hydrologic models of the basin could result in inaccurate predictions of its water budget and thus mislead water management decisions in the basin. This work aims to understand the impacts of groundwater pumping on the spatiotemporal patterns of modeling regulated streamflow in the CRB using a modified version of the Variable Infiltration Capacity (VIC) model integrated with a water management component that accounts for groundwater withdrawals, irrigation demands, and reservoir operation (VIC-GIRR). The VIC-GIRR simulations showed that considering additional groundwater withdrawals would alleviate the stress of irrigation water deficit in the Snake River Basin with an average reduction of 10 km 3 /year. Such a reduction in water deficit resulted in slight streamflow increase over the CRB with maximum increase up to 40% during dry period in certain locations. We also note that the implementation of groundwater withdrawal does not, however, improve the overall model performance in long-term averaged streamflow and storage predictions. Our results highlight the efforts needed to examine additional important processes in representing the interactions between water withdrawals and reservoir operations. Such efforts will aid in better simulation of multi-reservoir system and improve effectiveness for agricultural productivity, power generation, flood control, and navigation purposes.

54 ENVIRONMENTAL SCIENCES↗

High Performance Batteries Based on Hybrid Magnesium and Lithium Chemistry

Magnesium and lithium (Mg/Li) hybrid batteries that combine Mg and Li electrochemistry, consisting of a Mg anode, a lithium-intercalation cathode and a dual-salt electrolyte with both Mg2+ and Li+ ions, were constructed and examined in this work. Our results show that hybrid (Mg/Li) batteries were able to combine the advantages of Li-ion and Mg batteries, and delivered outstanding rate performance (83% for capacities at 15C and 0.1C) and superior cyclic stability (~5% fade after 3000 cycles).

hybrid battery, Mg battery, Chevrel phase, Large s↗

Systems Engineering and Analysis in Support of a US Federal Staging Facility for UNF

The US Department of Energy Office of Nuclear Energy (DOE-NE) Office of Spent Fuel and High-Level Waste Disposition is examining a set of system options and conducting supporting analyses to inform the development of an integrated waste management system, which may include one or more federal staging facilities (FSFs) for used nuclear fuel (UNF ) sited using a collaborative siting process. This paper focuses on the ongoing activities in two systems engineering and analysis work areas: (1) data and tools development, validation, and maintenance and (2) systems engineering execution. Within the first work area, the STANDARDS 5.0 UNF data and analysis tool, formerly known as UNF-ST&DARDS, is being developed as a foundational resource to assist in the management of UNF data. It has the key capability to model UNF throughout the entire back end of the fuel cycle. STANDARDS also includes several compatible analysis tools for the time-dependent characterization of UNF and related systems by interfacing with the SCALE code system for nuclear analysis and COBRA-SFS for thermal analysis. Also, within the data and tools area is the Next Generation System Analysis Model (NGSAM), which is an agent-based simulation software tool expressly designed to be capable of modeling the waste management system, including the transportation of UNF to and from a FSF. NGSAM has been developed to enable informed decision-making by providing the capability to analyze various potential system options for the management of UNF and high-level radioactive waste. Finally, in the systems engineering execution area, the team has begun to apply a disciplined systems engineering approach at the system level along with supporting analysis to guide the development of the FSF project requirements (including associated transportation infrastructure). Systems engineering principles and practices and their adaptation/application to design and development activities will ensure that the waste management system is effectively implemented as work proceeds. Other activities include investigating the implications of changes in various assumptions and parameters related to waste management systems, such as UNF acceptance rates, receipt logic, facility capacities and capabilities, use of standardized canisters, and different assumed facility operation start dates. Keywords: federal staging facility (FSF), used nuclear fuel (UNF), integrated waste management (IWM) system, Next Generation System Analysis Model (NGSAM), STANDARDS, systems engineering

Joseph, Robert↗

Location-dependent communications using quantum entanglement

The ability to unconditionally verify the location of a communication receiver would lead to a wide range of new security paradigms. However, it is known that unconditional location verification in classical communication systems is impossible. In this work we show how unconditional location verification can be achieved with the use of quantum communication channels. Our verification remains unconditional irrespective of the number of receivers, computational capacity, or any other physical resource held by an adversary. Quantum location verification represents an application of quantum entanglement that delivers a feat not possible in the classical-only channel. It gives us the ability to deliver real-time communications viable only at specified geographical coordinates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amine Oxidation Catalyzed by NO 2

Amine oxidation is a major risk in the deployment of amine scrubbing for CO2 capture from post-combustion flue gas. Oxidation probably occurs by dissolved oxygen at elevated temperature, Fe(III)/Fe(II) shuttling between the absorber and the stripper, and by NO2 in the absorber. Amine selection, dissolved oxygen removal, and solvent reclaiming mitigate oxidation due to dissolved oxygen and iron shuttle mechanism, but not by NO2. This work examines piperazine (PZ) oxidation by NO2 in a bench-scale high gas flow reactor (HGF). PZ is an effective second-generation solvent with high CO2 capacity, fast capture rate, good thermal stability, and good resistance to oxidation. Flue gas typically contains 0.5–5 ppm NO2 and 10–100 ppm NO. NO2 at 1 ppm in the flue gas appears to cause significant amine oxidation in pilot plant testing. PZ solution can easily absorb NO2, and it is hypothesized that NO2 can catalytically oxidize PZ through free-radical propagation. The issue may not be solved by a NO2 pre-scrubber since the coexistence of NO and O2 in the flue gas will keep producing non-negligible amounts of NO2 in the ductwork and the absorber after the NO2 incoming with the flue gas has been scrubbed. In addition, NO2 may not only oxidize PZ but also the intermediate degradation products, and it is unknown if the existence of dissolved iron influences the oxidation by NO2. Previous workers have also shown that NO2 is the stoichiometric source of nitrosamine. A comprehensive analysis of NO2 oxidation is needed to address solvent management and its health/environmental impact. The new high gas flow (HGF) reactor focuses only on the absorber environment and is simpler to interpret because it does not include oxidation at high temperatures and by dissolved metal catalysts from corrosion. This paper presents the results of HGF experiments and shows evidence to support a hypothesis of amine oxidation catalyzed by NO2, presents the synergic effect of NO2 and iron on amine oxidation, points out the different effects of NO2 in clean and degraded solvents, and demonstrates that NO2 not only can oxidize amines but also their degradation products.

NO2, iron, piperazine (PZ), solvent oxidation, sol↗

The Science of Battery Degradation

This report documents work that was performed under the Laboratory Directed Research and Development project, Science of Battery Degradation. The focus of this work was on the creation of new experimental and theoretical approaches to understand atomistic mechanisms of degradation in battery electrodes that result in loss of electrical energy storage capacity. Several unique approaches were developed during the course of the project, including the invention of a technique based on ultramicrotoming to cross-section commercial scale battery electrodes, the demonstration of scanning transmission x-ray microscopy (STXM) to probe lithium transport mechanisms within Li-ion battery electrodes, the creation of in-situ liquid cells to observe electrochemical reactions in real-time using both transmission electron microscopy (TEM) and STXM, the creation of an in-situ optical cell utilizing Raman spectroscopy and the application of the cell for analyzing redox flow batteries, the invention of an approach for performing ab initio simulation of electrochemical reactions under potential control and its application for the study of electrolyte degradation, and the development of an electrochemical entropy technique combined with x-ray based structural measurements for understanding origins of battery degradation. These approaches led to a number of scientific discoveries. Using STXM we learned that lithium iron phosphate battery cathodes display unexpected behavior during lithiation wherein lithium transport is controlled by nucleation of a lithiated phase, leading to high heterogeneity in lithium content at each particle and a surprising invariance of local current density with the overall electrode charging current. We discovered using in-situ transmission electron microscopy that there is a size limit to lithiation of silicon anode particles above which particle fracture controls electrode degradation. From electrochemical entropy measurements, we discovered that entropy changes little with degradation but the origin of degradation in cathodes is kinetic in nature, i.e. lower rate cycling recovers lost capacity. Finally, our modeling of electrode-electrolyte interfaces revealed that electrolyte degradation may occur by either a single or double electron transfer process depending on thickness of the solid-electrolyte-interphase layer, and this cross-over can be modeled and predicted.

25 ENERGY STORAGE↗

Analyzing Data Movements and Identifying Techniques for Next-generation High-bandwidth Networks

High-bandwidth networks are poised to provide new opportunities in tackling large data challenges in today's scientific applications. However, increasing the bandwidth is not sufficient by itself; we need careful evaluation of future high-bandwidth networks from the applications’ perspective. We have investigated data transfer requirements of climate applications as a typical scientific example and evaluated how the scientific community can benefit from next generation high-bandwidth networks. We have experimented with current state-of-the-art data movement tools, and realized that there is no single solution for presetting transfer parameters for optimal use of the available bandwidth. Thus, we developed an adaptive transfer methodology for tuning and optimization in wide-area data transfers. This worked well with large files. However, typical scientific datasets may include many small files. Current filecentric data transfer protocols do not perform well with managing the transfer of small files, even when using parallel streams or concurrent transfers over high bandwidth networks. In order to overcome this problem, we develop a new block-based data movement method (in contrast to the current file-based methods) to improve data movement performance and efficiency in moving large scientific datasets that contain many small files. We implemented the new block-based data movement tool, which takes the approach of aggregating files into blocks and providing dynamic data channel management. In our work, we also realized that one of the major obstacles in use of high-bandwidth networks is the limitation in host system resources. 100Gbps is beyond the capacity of today’s commodity machine, since we need substantial amount of processing power and involvement of multiple cores to fill a 40Gbps or 100Gbps network. As a result, host system performance plays an important role in the use of highbandwidth networks. We have conducted a large number of experiments with our new block-based method and with current available file-based data movement tools. In this white paper, we describe future research problems and challenges for efficient use of next-generation science networks, based on the lessons learnt and the experiences gained with 100Gbps network applications.

100Gbps network applications↗