Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Rapid assessment of wear-resistant tool coatings

The operation of a cutting wedge is studied in order to improve coating application on tools. A method of investigating the coating characteristics in plant conditions is outlined. The mechanisms of coating failure in cutting are established. The blunting of tools in the course of operation is analyzed. Coating application is optimized.

42 ENGINEERING↗

Improved Tools for the Turning of Complex Surfaces

The low cutter productivity in the turning of complex discontinuous surfaces is analyzed. New tools with composite cutters are proposed. Thanks to the cutter configuration with respect to the machined surface, the consequences of tool impact on insertion in the workpiece may be minimized.

42 ENGINEERING↗

Modeling of Tool Wear: Irreversible Energy Transformations

Modeling of the wear at the rear tool face in the turning of metals is based on an integral Volterra operator of the second kind. That permits adequate formal representation of tool wear in terms of the work and the power of irreversible energy transformations in the cutting zone.

42 ENGINEERING↗

Test Methods for Power Tools

Tests of power tools and measurements of the impact energy on the basis of Procedure 05 of the European Power Tools Association (EPTA) and the method in State Standard GOST 55162-2012 are compared by means of the UIPU-4M system (developed by OOO UDARMASh). It is found that the test and measurement methods may be improved, with increase in precision and reproducibility.

42 ENGINEERING↗

Expanded Capabilities of Internal Boring Tools with Indexable Inserts

The design of tools with adjustable geometry is analyzed. A design is proposed for a boring tool with a replaceable polyhedral insert in which the lead angle may be varied. This design permits the machining of blind and through holes in the workpiece with the same cutter.

42 ENGINEERING↗

Selection of a Cutting Tool by Means of a Digital Model

A digital model of a cutting tool produced by neural-network modeling is considered. By means of this model, the composition and structure of a wear-resistant coating may be optimized. The machining conditions that ensure maximum wear resistance of the tool may also be identified.

42 ENGINEERING↗

Influence of Alternating Stress on the Life of Metal-Cutting Tools

Abstract—The failure of cutting tools is investigated. A generalized approach to describing failure is proposed, on the basis of the theory of random point processes. Two mechanisms by which the abrasive particles act on the tool’s cutting edge are considered. The corresponding dynamics of damage accumulation is described.

36 MATERIALS SCIENCE↗

gRNA-SeqRET: a universal tool for targeted and genome-scale gRNA design and sequence extraction for prokaryotes and eukaryotes

High-throughput genetic screening is frequently employed to rapidly associate gene with phenotype and establish sequence-function relationships. With the advent of CRISPR technology, and the ability to functionally interrogate previously genetically recalcitrant organisms, non-model organisms can be investigated using pooled guide RNA (gRNA) libraries and sequencing-based assays to quantitatively assess fitness of every targeted locus in parallel. To aid the construction of pooled gRNA assemblies, we have developed an in silico design workflow for gRNA selection using the gRNA Sequence Region Extraction Tool (gRNA-SeqRET). Built upon the previously developed CCTop, gRNA-SeqRET enables automated, scalable design of gRNA libraries that target user-specified regions or whole genomes of any prokaryote or eukaryote. Additionally, gRNA-SeqRET automates the bulk extraction of any regions of sequence relative to genes or other features, aiding in the design of homology arms for insertion or deletion constructs. We also assess in silico the application of a designed gRNA library to other closely related genomes and demonstrate that for very closely related organisms Average Nucleotide Identity (ANI) > 95% a large fraction of the library may be of relevance. The gRNA-SeqRET web application pipeline can be accessed at https://grna.jgi.doe.gov. The source code is comprised of freely available software tools and customized Python scripts, and is available at https://bitbucket.org/berkeleylab/grnadesigner/src/master/ under a modified BSD open-source license (https://bitbucket.org/berkeleylab/grnadesigner).

59 BASIC BIOLOGICAL SCIENCES↗

NASA Software Estimating Tool (N-SET)

The goals of this project are to: Develop an early lifecycle software cost estimation tool leveraging existing data and capabilities Collect additional software data from: a) Jet Propulsion Laboratory; b) Goddard Space Flight Center; and c) Marshall Space Flight Center. Analyze, normalize, evaluate, stratify, and validate data. Create a calibrated, validated, and documented tool initially using available data and subsequently using newly collected data.

cost estimating tools↗

Deep Impact Sequence Planning Using Multi-Mission Adaptable Planning Tools With Integrated Spacecraft Models

The Deep Impact mission was ambitious and challenging. JPL's well proven, easily adaptable multi-mission sequence planning tools combined with integrated spacecraft subsystem models enabled a small operations team to develop, validate, and execute extremely complex sequence-based activities within very short development times. This paper focuses on the core planning tool used in the mission, APGEN. It shows how the multi-mission design and adaptability of APGEN made it possible to model spacecraft subsystems as well as ground assets throughout the lifecycle of the Deep Impact project, starting with models of initial, high-level mission objectives, and culminating in detailed predictions of spacecraft behavior during mission-critical activities.

Deep Impact Mission↗

Controller Strategies for Automation Tool Use under Varying Levels of Trajectory Prediction Uncertainty

A human-in-the-loop simulation was conducted to examine the effects of varying levels of trajectory prediction uncertainty on air traffic controller workload and performance, as well as how strategies and the use of decision support tools change in response. This paper focuses on the strategies employed by two controllers from separate teams who worked in parallel but independently under identical conditions (airspace, arrival traffic, tools) with the goal of ensuring schedule conformance and safe separation for a dense arrival flow in en route airspace. Despite differences in strategy and methods, both controllers achieved high levels of schedule conformance and safe separation. Overall, results show that trajectory uncertainties introduced by wind and aircraft performance prediction errors do not affect the controllers' ability to manage traffic. Controller strategies were fairly robust to changes in error, though strategies were affected by the amount of delay to absorb (scheduled time of arrival minus estimated time of arrival). Using the results and observations, this paper proposes an ability to dynamically customize the display of information including delay time based on observed error to better accommodate different strategies and objectives.

Strategy↗

A Sounding-based Severe Weather Tool to Support Daily Operations at Kennedy Space Center and Cape Canaveral Air Force Station

People and property at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) are at risk when severe weather occurs. Strong winds, hail and tornadoes can injure individuals and cause costly damage to structures if not properly protected. NASA's Launch Services Program and Ground Systems Development and Operations Program and other KSC programs use the daily and weekly severe weather forecasts issued by the 45th Weather Squadron (45 WS) to determine if they need to limit an activity such as working on gantries, or protect property such as a vehicle on a pad. The 45 WS requested the Applied Meteorology Unit (AMU) develop a warm season (May-September) severe weather tool for use in the Meteorological Interactive Data Display System (MIDDS) based on the late morning, 1500 UTC (1100 local time), CCAFS (XMR) sounding. The 45 WS frequently makes decisions to issue a severe weather watch and other severe weather warning support products to NASA and the 45th Space Wing in the late morning, after the 1500 UTC sounding. The results of this work indicate that certain stability indices based on the late morning XMR soundings can depict differences between days with reported severe weather and days with no reported severe weather. The AMU determined a frequency of reported severe weather for the stability indices and implemented an operational tool in MIDDS.

Hail↗

Development, Testing, and Validation of a Model-Based Tool to Predict Operator Responses in Unexpected Workload Transitions

One human factors challenge is predicting operator performance in novel situations. Approaches such as drawing on relevant previous experience, and developing computational models to predict operator performance in complex situations, offer potential methods to address this challenge. A few concerns with modeling operator performance are that models need to realistic, and they need to be tested empirically and validated. In addition, many existing human performance modeling tools are complex and require that an analyst gain significant experience to be able to develop models for meaningful data collection. This paper describes an effort to address these challenges by developing an easy to use model-based tool, using models that were developed from a review of existing human performance literature and targeted experimental studies, and performing an empirical validation of key model predictions.

model-based workload transition tool↗

Exploring Synergistic Tools from NASA Satellite Data for Air Quality

Space-borne earth observation has been important to monitor the earth condition and played a critical role in validating other instruments or modeling's outputs. However, the data from satellite earth observation are usually very complex in terms of science contents, formats, and spatiotemporal granularities, making them difficult to use from many aspects. NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), one of the 12 official NASA data centers, archives and distributes rich collections of data from multiple satellite missions and model results. The GES DISC is also the official archive center for data from the Ozone Monitoring Instrument (OMI) aboard NASA's Aura mission since 2004. Recently, the GES DISC has been evolving and improving its data management and services in order to promote NASA data to be easily discovered and accessed, as well as to facilitate interoperability. We'll show in this presentation how to explore and analyze NASA earth observation data for air quality through a suite of user-friendly tools - from Worldview to Giovanni, demonstrating in using this set of tools prepares us to serve the Sentinel 5P TROPOMI to the community.

air quality↗

Blind Validation Study of Parametric Cost Estimation Tool SEER-H for NASA Space Missions

One of the primary parametric cost modeling tools used by NASA and the aerospace industry to estimate the development and production cost of future spacecraft hardware is SEER-H by Galorath. To date, no independent validation of this tool for cost estimation of space missions has been reported in the literature. In the present validation study, cost estimators used SEER-H to estimate the cost of twelve different past NASA science missions. The estimators were prevented from knowing the actual cost of the missions in an effort to minimize cognitive biases. The point estimates of SEER-H had an average error of 23%, median error of -0.3%, and a standard deviation of 43%. Nine of the twelve mission's actual costs fell within the 80% confidence interval of SEER's probabilistic estimates. Several factors independent of SEER that may have affected the accuracy of the results have been identified and are discussed; these include: uncertainty in the technical data used for the estimates, the methods used to estimate uncertainty in spacecraft component mass and numbers of prototypes, and the experience of the estimators.

SEER-H↗