Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Systems Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Voltage Stability Assessment Using Synchronized Phasor Measurements Applied to the Argentine Power System

This paper presents tests of different methods for long term voltage stability analysis based on PMU measurements. In particular, Thevenin Impedance Matching and sensitivity calculation are studied. Simulation are performed in a modified Argentine power system model, to include the main components for studying long term voltage stability. Disconnection of a large Thermal Generating Station causing long-term voltage instability at Gran Buenos Aires Area is studied. It is shown that computing the apparent impedance of Thevenin equivalent at load bus from measurements taken at a single time but at various locations of the transmission corridor produce a significant reduction of the estimation error produce when only local measurements are used. Voltage Stability analysis is performed using a reduced power system model where changing parameters are fully computed through PMU data at each time. Over this reduced power system model, voltage stability index and sensibility calculations are performed.

Gill-Estebez, Pablo↗

Provision for Guaranteed Inertial Response in Diesel-Wind Systems via Model Reference Control

Frequency performance has been a crucial issue for islanded microgrids. On one hand, most distributed energy resources (DER) are converter-interfaced and do not inherently respond to frequency variations. On the other hand, current inertia emulation approach cannot provide guaranteed response. In this paper, a model reference control based inertia emulation strategy is proposed for the diesel-wind systems. Desired inertia can be precisely emulated through the proposed strategy. A typical frequency response model with parametric inertia is set to be the reference model. A measurement at a specific location delivers the information about the disturbance acting on the diesel-wind system to the reference model. The objective is for the speed of the diesel generator to track the reference so that the desired inertial response is realized. In addition, polytopic parameter uncertainty will be considered. The control strategy is configured in different ways according to different operating points. The parameters of the reference model are scheduled to ensure adequate frequency response under a pre-defined worst case. The controller is implemented in a nonlinear three-phase diesel-wind system fed microgrid using the Simulink software platform. Lastly, the results show exact synthetic inertia is emulated and adequate frequency response is achieved.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Holographic open quantum systems: toy models and analytic properties of thermal correlators

We present a unified picture of open quantum systems, the theory of a system probing a noisy thermal environment, distilling lessons learnt from previous holographic analyses. Our treatment is applicable both when the system is coupled to short-lived (Markovian), and long-lived (non-Markovian) environmental degrees of freedom. The thermal environment is modeled using an asymptotically AdS black hole, and the systems of interest are simple probe field theories. The effective stochastic dynamics of the system is governed by real-time thermal correlators, which we compute using the gravitational Schwinger-Keldysh (grSK) geometry. We describe the structure of arbitrary tree-level contact and exchange Witten diagrams in the grSK geometry. In particular, we argue, that all such diagrams reduce to integrals supported on a single copy of the exterior of the black hole. The integrand is obtained as a multiple discontinuity of a function comprising ingoing boundary-bulk propagators, monodromy functions which appear as radial Boltzmann weights, and vertex factors. These results allow us to deduce the analytic structure of real-time thermal n-point functions in holographic CFTs. We illustrate the general statements by a two-dimensional toy model, dual to fields in the BTZ background, which we argue captures many of the essential features of generic open holographic QFTs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The circular bioeconomy: a driver for system integration

Background: Human and earth system modeling, traditionally centered on the interplay between the energy system and the atmosphere, are facing a paradigm shift. The Intergovernmental Panel on Climate Change’s mandate for comprehensive, cross-sectoral climate action emphasizes avoiding the vulnerabilities of narrow sectoral approaches. Our study explores the circular bioeconomy, highlighting the intricate interconnections among agriculture, forestry, aquaculture, technological advancements, and ecological recycling. Collectively, these sectors play a pivotal role in supplying essential resources to meet the food, material, and energy needs of a growing global population. We pose the pertinent question of what it takes to integrate these multifaceted sectors into a new era of holistic systems thinking and planning. Results: The foundation for discussion is provided by a novel graphical representation encompassing statistical data on food, materials, energy flows, and circularity. This representation aids in constructing an inventory of technological advancements and climate actions that have the potential to significantly reshape the structure and scale of the economic metabolism in the coming decades. In this context, the three dominant mega-trends—population dynamics, economic developments, and the climate crisis—compel us to address the potential consequences of the identified actions, all of which fall under the four categories of substitution, efficiency, sufficiency, and reliability measures. Substitution and efficiency measures currently dominate systems modeling. Including novel bio-based processes and circularity aspects might require only expanded system boundaries. Conversely, paradigm shifts in systems engineering are expected to center on sufficiency and reliability actions. Effectively assessing the impact of sufficiency measures will necessitate substantial progress in inter- and transdisciplinary collaboration, primarily due to their non-technological nature. In addition, placing emphasis on modeling the reliability and resilience of transformation pathways represents a distinct and emerging frontier that highlights the significance of an integrated network of networks. Conclusions: Existing and emerging circular bioeconomy practices can serve as prime examples of system integration. These practices facilitate the interconnection of complex biomass supply chain networks with other networks encompassing feedstock-independent renewable power, hydrogen, CO 2 , water, and other biotic, abiotic, and intangible resources. Elevating the prominence of these connectors will empower policymakers to steer the amplification of synergies and mitigation of tradeoffs among systems, sectors, and goals.

09 BIOMASS FUELS↗

Truck platooning in the U.S. national road network: A system-level modeling approach

Truck platooning enables a group of trucks to move close together, which helps reduce truck fuel use and increase effective road capacity. In this paper, a system-level equilibrium model is developed to characterize spontaneous truck platooning with coexistence of non-platooning vehicles in a network, by explicitly accounting for the interlocking relationship among platoon formation time, truck fuel saving, and increase in effective road capacity. To equilibrate the relationships, an algorithm is proposed which involves a diagonalization approach and a bush based algorithm to solve decomposed subproblems. The condition of proportionality is imposed to obtain unique traffic flows for each class of vehicles on road links. In addition, a spatially constrained multivariate clustering technique is employed to construct origin/destination zones that are smaller than the coarse Freight Analysis Framework (FAF) zones, while maintaining reasonable computational burden for network traffic assignment. Model implementation in the U.S. shows that platooning could lead to 7.9% fuel saving among platoonable trucks in 2025 and a comparable increase in effective capacity of platoonable road links, which would account for 60% of rural interstate roads. The fuel saving and road capacity improvement translate into an annual cost reduction of $\$$868 million for the U.S. intercity trucking sector and reduced road infrastructure investment needs worth $\$$4.8 billion. Extensive sensitivity analysis further reveals that fuel saving of platoonable trucks increases with platoon size but decreases with inter-truck distance in a platoon. Fuel saving potential suggests that priority should be given to rural rather than urban roads in deploying platooning technologies. As we expected, greater market penetration of platooning technologies means higher fuel saving and greater increase in effective road capacity.

33 ADVANCED PROPULSION SYSTEMS↗

Simulation of Compound Flooding Using River‐Ocean Two‐Way Coupled E3SM Ensemble on Variable‐Resolution Meshes

Abstract Coastal zone compound flooding (CF) can be caused by the interactive fluvial and oceanic processes, particularly when coastal backwater propagates upstream and interacts with high river discharge. The modeling of CF is limited in existing Earth System Models (ESMs) due to coarse mesh resolutions and one‐way coupled river‐ocean components. In this study, we present a novel multi‐scale coupling framework within the Energy Exascale Earth System Model (E3SM), integrating global atmosphere and land with interactively coupled river and ocean models using different meshes with refined resolutions near the coastline. To evaluate this framework, we conducted ensemble simulations of a CF event (Hurricane Irene in 2011) in a Mid‐Atlantic estuary. The results demonstrate that the novel E3SM configuration can reasonably reproduce river discharge and sea surface height variations. The two‐way river‐ocean coupling improves the representation of coastal backwater effects at the terrestrial‐aquatic interface that are caused by the combined actions of tide and storm surge during the CF event, thus providing a valuable modeling tool for better understanding the river‐estuary‐ocean dynamics in extreme events under climate change. Notably, our results show that the most significant CF impacts occur when the highest storm surge generated by a tropical cyclone meets with a moderate river discharge. This study highlights the state‐of‐the‐art advancements developed within E3SM for simulating multi‐scale coastal processes.

54 ENVIRONMENTAL SCIENCES↗

Improving maize growth processes in the community land model: Implementation and evaluation

Earth system models (ESMs) are essential tools to study the impacts of historical and future climate on regional and global food production, as well as to assess the effectiveness of possible adaptations and their potential feedback to climate. Several current ESMs have the capabilities to simulate crop growth. However, some critical crop growth processes (e.g. flowering and other reproductive processes) and their responses to environmental extremes (e.g. heat stress) are not yet represented in most of these models. In this paper, an improved maize growth model was implemented in the Community Land Model version 4.5 (CLM4.5) by modifying the maize planting scheme, incorporating the phenology scheme adopted from the APSIM model (Agricultural Production Systems sIMulator), adding a new carbon allocation scheme into CLM4.5, and improving the estimation of canopy structure parameters including leaf area index (LAI) and canopy height. Unique features of the new model (CLM-APSIM) include more detailed phenology stages, an explicit implementation of the impacts of various abiotic environmental stresses (including nitrogen, water, temperature and heat stresses) on maize phenology and carbon allocation, as well as an explicit simulation of grain number. Evaluation of results at 7 AmeriFlux sites located in the US Corn Belt show that the CLM-APSIM model performs better than the original CLM4.5 in simulating phenology (LAI and canopy height), surface fluxes including gross primary production (GPP), net ecosystem exchange (NEE), latent heat (LH), and sensible heat (SH), and especially in simulating the biomass partition and maize yield. The CLM-APSIM model corrects a serious deficiency in CLM4.5-related to CLM4.5’s underestimation of aboveground biomass (i.e. overestimation of belowground biomass) and overestimation of Harvest Index, which lead to a reasonable yield estimation with wrong mechanisms. Moreover, 13-year simulation results from 2001 to 2013 at the three Mead sites (US-Ne1, Ne2 and Ne3) show that the CLM-APSIM model can more accurately reproduce maize yield responses to growing season climate (temperature and precipitation) than the original CLM4.5 when benchmarked with the site-based observations and USDA county-level survey statistics. The CLM-APSIM model is thus more suitable than its predecessor models in terms of simulating abiotic environmental stresses on maize yield. This new model provides an improved tool to attribute maize yield change to various processes under historical and future climate, as well as to assess and design effective climate adaptation strategies for sustainable agricultural production.

Peng, Bin↗

Determining the Drivers of Redox Sensitive Biogeochemistry in Humid Tropical Forests

Our objectives were to determine the spatial and temporal dynamics and drivers of soil O 2 availability and redox-sensitive biogeochemical processes using easily measured and modeled parameters. We used automated soil O 2 sensing coupled with measurements of soil chemical and physical properties, climate, and greenhouse gas concentrations and fluxes. These results are being used to derive quantitative relationships linking climate and soil physical properties to redox sensitive biogeochemical processes in tropical forests. We tested the hypothesis that hot spots and hot moments are driven primarily by high substrate availability using distributed sampling and field and lab fertilization experiments. To better model C and nutrient cycling and greenhouse gas fluxes in Earth system models we need to develop a more mechanistic understanding of the spatial and temporal dynamics and drivers of soil O 2 availability in tropical forest soils. In this study we used field and laboratory experiments to help develop a mechanistically derived redox component for the Community Land Model (CLM) module of the Community Earth System Model (CESM).

54 ENVIRONMENTAL SCIENCES↗

Energy level shifts at the silica/Ru(0001) heterojunction driven by surface and interface dipoles

Charge redistribution at heterogeneous interfaces is a fundamental aspect of surface chemistry. Manipulating the amount of charges and the magnitude of dipole moments at the interface in a controlled way has attracted tremendous attention for its potential to modify the activity of heterogeneous catalysts in catalyst design. Two-dimensional ultrathin silica films with well-defined atomic structures have been recently synthesized and proposed as model systems for heterogeneous catalysts studies. R. Wlodarczyk et al. (Phys. Rev. B, 85, 085403 (2012)) have demonstrated that the electronic structure of silica/Ru(0001) can be reversibly tuned by changing the amount of interfacial chemisorbed oxygen. Here we carried out systematic investigations to understand the underlying mechanism through which the electronic structure at the silica/Ru(0001) interface can be tuned. As corroborated by both in situ X-ray photoelectron spectroscopy and density functional theory calculations, the observed interface energy level alignments strongly depend on the surface and interfacial charge transfer induced dipoles at the silica/Ru(0001) heterojunction. These observations may help to understand variations in catalytic performance of the model system from the viewpoint of the electronic properties at the confined space between the silica bilayer and the Ru(0001) surface. As a result, the same behavior is observed for the aluminosilicate bilayer, which has been previously proposed as a model system for zeolites.

2D zeolites↗

Multi-century dynamics of the climate and carbon cycle under both high and net negative emissions scenarios

Abstract. Future climate projections from Earth system models (ESMs) typically focus on the timescale of this century. We use a set of five ESMs and one Earth system model of intermediate complexity (EMIC) to explore the dynamics of the Earth's climate and carbon cycles under contrasting emissions trajectories beyond this century to the year 2300. The trajectories include a very-high-emissions, unmitigated fossil-fuel-driven scenario, as well as a mitigation scenario that diverges from the first scenario after 2040 and features an “overshoot”, followed by a decrease in atmospheric CO2 concentrations by means of large net negative CO2 emissions. In both scenarios and for all models considered here, the terrestrial system switches from being a net sink to either a neutral state or a net source of carbon, though for different reasons and centered in different geographic regions, depending on both the model and the scenario. The ocean carbon system remains a sink, albeit weakened by carbon cycle feedbacks, in all models under the high-emissions scenario and switches from sink to source in the overshoot scenario. The global mean temperature anomaly is generally proportional to cumulative carbon emissions, with a deviation from proportionality in the overshoot scenario that is governed by the zero emissions commitment. Additionally, 23rd century warming continues after the cessation of carbon emissions in several models in the high-emissions scenario and in one model in the overshoot scenario. While ocean carbon cycle responses qualitatively agree in both globally integrated and zonal mean dynamics in both scenarios, the land models qualitatively disagree in zonal mean dynamics, in the relative roles of vegetation and soil in driving C fluxes, in the response of the sink to CO2, and in the timing of the sink–source transition, particularly in the high-emissions scenario. The lack of agreement among land models on the mechanisms and geographic patterns of carbon cycle feedbacks, alongside the potential for lagged physical climate dynamics to cause warming long after CO2 concentrations have stabilized, points to the possibility of surprises in the climate system beyond the 21st century time horizon, even under relatively mitigated global warming scenarios, which should be taken into consideration when setting global climate policy.

54 ENVIRONMENTAL SCIENCES↗

On the applicability of surrogate-based Markov chain Monte Carlo-Bayesian inversion to the Community Land Model: Case studies at flux tower sites: SURROGATE-BASED MCMC FOR CLM

The Community Land Model (CLM) has been widely used in climate and Earth system modeling. Accurate estimation of model parameters is needed for reliable model simulations and predictions under current and future conditions, respectively. In our previous work, a subset of hydrological parameters has been identified to have significant impact on surface energy fluxes at selected flux tower sites based on parameter screening and sensitivity analysis, which indicate that the parameters could potentially be estimated from surface flux observations at the towers. To date, such estimates do not exist. In this paper, we assess the feasibility of applying a Bayesian model calibration technique to estimate CLM parameters at selected flux tower sites under various site conditions. The parameters are estimated as a joint probability density function (PDF) that provides estimates of uncertainty of the parameters being inverted, conditional on climatologically-average latent heat fluxes derived from observations. We find that the simulated mean latent heat fluxes from CLM using the calibrated parameters are generally improved at all sites when compared to those obtained with CLM simulations using default parameter sets. Further, our calibration method also results in credibility bounds around the simulated mean fluxes which bracket the measured data. The modes (or maximum a posteriori values) and 95% credibility intervals of the site-specific posterior PDFs are tabulated as suggested parameter values for each site. Analysis of relationships between the posterior PDFs and site conditions suggests that the parameter values are likely correlated with the plant functional type, which needs to be confirmed in future studies by extending the approach to more sites.

Huang, Maoyi↗

One System, Many Models: Designing a Surrogate Model for Sulfur Thermal Energy Storage: Preprint

Industrial process heating (IPH) relies primarily on thermal energy generated by fossil fuel combustion to produce, treat, and alter manufactured goods. Thermal energy storage (TES) helps reduce the carbon footprint of IPH systems by facilitating the utilization of renewable and waste heat sources. A promising new TES technology uses elemental sulfur as the heat-storage medium. The design of sulfur TES systems can be evaluated with the aid of computational fluid dynamics (CFD). However, the computational cost of such CFD efforts is prohibitive to comprehensive optimizations over design parameters. To reduce this computational cost, machine learning (ML) models can be developed to act as surrogates for CFD. In this paper, we describe the process of building and evaluating surrogate ML models for facilitating optimization of sulfur TES systems for IPH. To enforce the thermodynamic relationship between the two modeled quantities, we develop a hybrid model for sulfur temperature using both direct predictions of temperature and calculations of temperature from predictions of the heat transfer coefficient. The hybrid model enforces this constraint at the expense of the slightly reduced accuracy compared to two disjoint models. The overall high accuracy observed in our model evaluation demonstrates the usefulness of such surrogate modeling for studying TES systems. This work contributes to the field of TES surrogate modeling by offering a novel accurate hybrid approach to predicting simultaneously the heat transfer coefficient and temperature of the heat storage medium.

computational fluid dynamics↗

Hybrid Solar Heat Generation Modelling and Cases: Preprint

Renewable thermal energy systems (RTES) harness renewable energy sources to provide services for space heating and cooling, district heating, domestic hot water, and industrial process heat (IPH). The use of low-pressure steam generated by the combustion of fossil fuels is common today to provide process heat for industrial facilities. Solar IPH (SIPH) technologies could economically replace the steam or heat needs at many industrial sites by providing high-temperature pressurized hot water, a heat transfer fluid (HTF) such as synthetic-oil, or direct steam (Kurup and Turchi, 2015). RTES could be hybridized with technology options or combined with the existing heat supply (e.g. fuels), to give options for targeted IPH application and the reduction of fuel consumption. This work has tested hybrid system modelling approaches. Initial results show when a natural gas (NG) burner that feeds an IPH application of 300°C, has both air and NG streams pre-heated with a solar field/RTES exit temperature of 180°C (via an HTF), a 13% NG offset is possible. NG offsets reach up to 26%, when the RTES exit temperatures are at 300°C for a given annual capacity factor of 24%. This can be even higher with addition of thermal energy storage (TES).

43 PARTICLE ACCELERATORS↗

Systems Biology Modeling of the Radiation Sensitivity Network: A Biomarker Discovery Platform

Purpose: The discovery of effective biomarkers is a fundamental goal of molecular medicine. Developing a systems-biology understanding of radiosensitivity can enhance our ability of identifying radiation-specific biomarkers. Methods and Materials: Radiosensitivity, as represented by the survival fraction at 2 Gy was modeled in 48 human cancer cell lines. We applied a linear regression algorithm that integrates gene expression with biological variables, including ras status (mut/wt), tissue of origin and p53 status (mut/wt). Results: The biomarker discovery platform is a network representation of the top 500 genes identified by linear regression analysis. This network was reduced to a 10-hub network that includes c-Jun, HDAC1, RELA (p65 subunit of NFKB), PKC-beta, SUMO-1, c-Abl, STAT1, AR, CDK1, and IRF1. Nine targets associated with radiosensitization drugs are linked to the network, demonstrating clinical relevance. Furthermore, the model identified four significant radiosensitivity clusters of terms and genes. Ras was a dominant variable in the analysis, as was the tissue of origin, and their interaction with gene expression but not p53. Overrepresented biological pathways differed between clusters but included DNA repair, cell cycle, apoptosis, and metabolism. The c-Jun network hub was validated using a knockdown approach in 8 human cell lines representing lung, colon, and breast cancers. Conclusion: We have developed a novel radiation-biomarker discovery platform using a systems biology modeling approach. We believe this platform will play a central role in the integration of biology into clinical radiation oncology practice.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Uncertainty Quantification of PV Annual Energy Estimates in the System Advisor Model

This work will detail a proposed uncertainty quantification method for PV annual energy estimates. Motivations behind the proposed methodology will be discussed, including the frequent underperformance of installed PV systems to calculated probability of exceedance values being seen in industry. A methodology in which uncertainty factors correlated to different parts of the PV annual energy model chain are applied to annual energy estimates in conjunction with uncertainty from inter-annual solar resource variability will be described. The application of this methodology in the System Advisor Model (SAM) will also be discussed with example cases and graphical outputs of the probability of exceedance data calculated for the PV annual energy estimates.

energy modeling↗

Modeling moving systems with RELAP5-3D

RELAP5-3D is typically used to model stationary, land-based reactors. However, it can also model reactors in other inertial and accelerating frames of reference. By changing the magnitude of the gravitational vector through user input, RELAP5-3D can model reactors on a space station or the moon. The field equations have also been modified to model reactors in a non-inertial frame, such as occur in land-based reactors during earthquakes or onboard spacecraft. Transient body forces affect fluid flow in thermal-fluid machinery aboard accelerating crafts during rotational and translational accelerations. It is useful to express the equations of fluid motion in the accelerating frame of reference attached to the moving craft. However, careful treatment of the rotational and translational kinematics is required to accurately capture the physics of the fluid motion. Correlations for flow at angles between horizontal and vertical are generated via interpolation where no experimental studies or data exist. The equations for three-dimensional fluid motion in a non-inertial frame of reference are developed. As a result, two different systems for describing rotational motion are presented, user input is discussed, and an example is given.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Climate Change Projections in CESM1(CAM5) Compared to CCSM4

Future climate change projections for phase 5 of the Coupled Model Intercomparison Project (CMIP5) are introduced for the Community Earth System Model version 1 that includes the Community Atmospheric Model version 5 [CESM1(CAM5)]. These findings are compared to the Community Climate System Model, version 4 (CCSM4) and include simulations using the representative concentration pathway (RCP) mitigation scenarios, and extensions for those scenarios beyond 2100 to 2300. Equilibrium climate sensitivity of CESM1(CAM5) is 4.10°C, which is higher than the CCSM4 value of 3.20°C. The transient climate response is 2.33°C, compared to the CCSM4 value of 1.73°C. Thus, even though CESM1(CAM5) includes both the direct and indirect effects of aerosols (CCSM4 had only the direct effect), the overall climate system response including forcing and feedbacks is greater in CESM1(CAM5) compared to CCSM4. The Atlantic Ocean meridional overturning circulation (AMOC) in CESM1(CAM5) weakens considerably in the twenty-first century in all the RCP scenarios, and recovers more slowly in the lower forcing scenarios. The total aerosol optical depth (AOD) changes from ~0.12 in 2006 to ~0.10 in 2100, compared to a preindustrial 1850 value of 0.08, so there is less negative forcing (a net positive forcing) from that source during the twenty-first century. As a result, the change from 2006 to 2100 in aerosol direct forcing in CESM1(CAM5) contributes to greater twenty-first century warming relative to CCSM4. There is greater Arctic warming and sea ice loss in CESM1(CAM5), with an ice-free summer Arctic occurring by about 2060 in RCP8.5 (2040s in September) as opposed to about 2100 in CCSM4 (2060s in September).

54 ENVIRONMENTAL SCIENCES↗