Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

The interplay between dynamic heterogeneities and structure of bulk liquid water: A molecular dynamics simulation study

In order to study the interplay between dynamical heterogeneities and structural properties of bulk liquid water in the temperature range 130–350 K, thus including the supercooled regime, we use the explicit trend of the distribution functions of some molecular properties, namely, the rotational relaxation constants, the atomic mean-square displacements, the relaxation of the cross correlation functions between the linear and squared displacements of H and O atoms of each molecule, the tetrahedral order parameter q and, finally, the number of nearest neighbors (NNs) and of hydrogen bonds (HBs) per molecule. Two different potentials are considered: TIP4P-Ew and a model developed in this laboratory for the study of nanoconfined water. The results are similar for the dynamical properties, but are markedly different for the structural characteristics. In particular, for temperatures higher than that of the dynamic crossover between “fragile” (at higher temperatures) and “strong” (at lower temperatures) liquid behaviors detected around 207 K, the rotational relaxation of supercooled water appears to be remarkably homogeneous. However, the structural parameters (number of NNs and of HBs, as well as q) do not show homogeneous distributions, and these distributions are different for the two water models. Another dynamic crossover between “fragile” (at lower temperatures) and “strong” (at higher temperatures) liquid behaviors, corresponding to the one found experimentally at T{sup ∗} ∼ 315 ± 5 K, was spotted at T{sup ∗} ∼ 283 K and T{sup ∗} ∼ 276 K for the TIP4P-Ew and the model developed in this laboratory, respectively. It was detected from the trend of Arrhenius plots of dynamic quantities and from the onset of a further heterogeneity in the rotational relaxation. To our best knowledge, it is the first time that this dynamical crossover is detected in computer simulations of bulk water. On the basis of the simulation results, the possible mechanisms of the two crossovers at molecular level are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions of binuclear copper(II) complexes with S-substituted thiosalicylate derivatives with some relevant biomolecules

Interactions of copper(II) complexes which contain S-alkyl derivatives of thiosalicylic acid (alkyl = methyl, ethyl, propyl and butyl; aryl = benzyl), marked as 1–5, with guanosine-5′-monophosphate (5′-GMP) and calf thymus DNA (CT-DNA) were studied. Kinetics of substitution reactions of 1–5 with 5′-GMP and CT-DNA were investigated under pseudo-first-order conditions at 310 K and pH = 7.2 in 25 mM Hepes buffer using stopped-flow method. All complexes have high affinity toward studied bio-molecules. Additionally, interactions with CT-DNA were followed by absorption spectroscopy and fluorescence quenching measurements. The results indicate that complexes bind to DNA exhibiting high binding constants (Kb = 104 M−1). During the examination of competitive reactions with ethidium bromide (EB), results showed that complexes can replace EB-bound DNA. In addition, a new crystal structure of the binuclear Cu(II) complex with S-substituted thiosalicylate derivative has been reported. In the present series of Cu(II) complexes the crystal structure is the first example of a complex comprising an S-aryl derivative of thiosalicylate ligand. Through comparative study of structural properties of six molecules from four crystal structures we examined the structural variations, potentially important for biological activity of these complexes. © 2019, © 2019 Informa UK Limited, trading as Taylor & Francis Group.

60 APPLIED LIFE SCIENCES↗

Favorable Concurrence of Static and Dynamic Phenomena at the Morphotropic Phase Boundary of x BiNi 0.5 Zr 0.5 O 3 - ( 1 - x ) PbTiO 3

We demonstrate that the morphotropic phase boundary of the lead-free ferroelectric system x BiNi 0.5 Zr 0.5 O 3 - ( 1 - x ) PbTiO 3 (NBT-xBT) can be uniquely distinguished by a reduced polarizationstate along with a non-uniform attening of the local potential function of A- and B-site cationsof the perovskite-type structure. This establishes a robust structure-property connections based onthe atomic-level structural correlations which elucidates the long-standing question: why the MPBof NBT-xBT does not excel as much as Pb-based materials do; and further help to develop strategyin designing ecient lead-free ferroelectric systems.

36 MATERIALS SCIENCE↗

Stabilization of Low Valent Zirconium Nitrides in Titanium Nitride via Plasma-Enhanced Atomic Layer Deposition and Assessment of Electrochemical Properties

The increasing awareness of metal nitrides as feasible electrocatalysts in numerous energy-relevant transformations motivates greater synthetic control of mixed metal nitride compositions and their valence states. We report plasma-enhanced atomic layer deposition of titanium zirconium nitride, with an emphasis on the experimental parameters that influence the valence states of the two metal ions. We further examined the consequence of various ratios of Ti and Zr on the electrochemically active surface areas (ECSAs). Films with a Zr-to-Ti ratio of 1:2 or 1:1 yielded the highest ECSA; deviation from these values led to a large fraction of electrically insulating or semiconducting titanium or zirconium oxynitrides/oxides. The systematic examination establishes a fundamental structure-property relationship critical to assessing the electrochemical/electrocatalytic properties of metal nitrides.

36 MATERIALS SCIENCE↗

The influence of substrate temperature on the structural and optical properties of ZnS thin films

Thin films of ZnS were deposited on soda lime glass substrates by a modified close-space sublimation technique. The change in optical and structural properties of the films deposited at various substrate temperatures (150-450 Degree-Sign C) was investigated. X-ray diffraction spectra showed that films were polycrystalline in nature having cubic structure oriented only along (111) plan. The crystallinity of films increased with the substrate temperature up to 250 Degree-Sign C. However, crystallinity decreased with further increase of substrate temperature and films became amorphous at 450 Degree-Sign C. The atomic force microscopy data revealed that the films become more uniform and dense with the increase of substrate temperature. Optical properties of the films were determined from the transmittance data using Swanepoel model. It was observed that the energy band gap is increased from 3.52 to 3.65 eV and refractive index of the films are decreased with the increase of substrate temperature. Moreover, considerable improvement in blue response of the films was noticed with increasing substrate temperature.

36 MATERIALS SCIENCE↗

Structural and Magnetic Properties of Co-Mn-Sb Thin films

Thin Co-Mn-Sb films of different compositions were investigated and utilized as electrodes in alumina based magnetic tunnel junctions with CoFe counterelectrode. The preparation conditions were optimized with respect to magnetic and structural properties. The Co-Mn-Sb/Al-O interface was analyzed by x-ray absorption spectroscopy and magnetic circular dichroism with particular focus on the element-specific magnetic moments. Co-Mn-Sb crystallizes in different complex cubic structures depending on its composition. The magnetic moments of Co and Mn are ferromagnetically coupled in all cases. A tunnel magnetoresistance ratio of up to 24% at 13 K was found and indicates that Co-Mn-Sb is not a ferromagnetic half-metal. These results are compared to recent works on the structure and predictions of the electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of structural and energetic properties of A2Hf2O7 (A = Dy, Ho, Er) compounds

The structural and energetic properties of A2Hf2O7 (A = Dy, Ho, Er) compounds have been investigated by means of ab initio total energy calculations. For Er2Hf2O7 the defect fluorite structure is predicted to be more stable than pyrochlore structure, agreeing well with previous experimental [J. Inorg. Nucl. Chem. 31, (1969) 2367, J. Less-Common Met. 14 (1968) 435] and theoretical [J. Am. Ceram. Soc. 85 (2002) 2139] investigations. In contrast to Er2Hf2O7 pyrochlore, Dy2Hf2O7 and Ho2Hf2O7 prefer pyrochlore structures, which is consistent with the recently experimental observations of Dy2Hf2O7 compound [J. Solid State Chem. 179 (2006) 1990].

36 MATERIALS SCIENCE↗

Multi-technique characterization of spray coated and roll-to-roll coated gas diffusion fuel cell electrodes

Here this work reports the characterization of catalyst layer (CL) structure and composition for a set of gas-diffusion electrodes (GDEs) fabricated by different coating methods with the goal of developing a better understanding of CL processing-structure-property-performance relationships. The CL coating techniques used in this study were ultrasonic spray coating, and two roll-to-roll (R2R) methods - gravure and slot die. Scanning transmission electron microscopy (STEM) coupled with X-ray energy dispersive spectroscopy (EDS) analysis of GDE cross-sections provided bulk information, while scanning electron microscopy (SEM) with EDS and X-ray photoelectron spectroscopy (XPS) were used to investigate the near surface and surface composition of the CLs that will be in direct contact with the membrane once the membrane electrode assembly (MEA) is constructed. This study demonstrates that common quantification parameters, namely the F:Pt ratio extracted from cross-sectional STEM-EDS maps and top-down CL measurements with SEM and XPS, along with roughness parameters quantified from SEM micrographs are useful parameters in explaining and potentially predicting performance trends. Additionally, it highlights the importance of understanding key CL surface properties for advancing the manufacturability of high-performance components for polymer electrolyte membrane (PEM) technologies.

30 DIRECT ENERGY CONVERSION↗

A high temperature diffraction-resistance study of chalcopyrite, CuFeS{sub 2}

The electrical, magnetic and structural properties of synthetic chalcopyrite, CuFeS{sub 2}, have been studied up to 873 K using DC resistance measurements performed in-situ during neutron powder diffraction experiments. Under ambient conditions the material adopts the accepted structural model for CuFeS{sub 2} in the space group I4-bar 2d, with the magnetic moment of the Fe{sup 3+} cations aligned along [001]. The electrical resistivity is around 0.3 {Omega} cm under ambient conditions, consistent with semiconductor character, and decreases slightly with increase in temperature until a more abrupt fall occurs in the region 750-800 K. This abrupt change in resistivity is accompanied by a structural transition to a cubic zinc blende structured phase (space group F4-bar 3m) in which Cu{sup +} and Fe{sup 3+} cations are disordered over the same tetrahedral crystallographic sites and by a simultaneous loss of long-range magnetic order. The implications of these results are discussed in the context of previous studies of the chalcopyrite system. - Graphical abstract: Structural, magnetic and electrical properties of CuFeS{sub 2} to 873 K have been investigated using DC resistance measurements, performed in-situ during the collection of powder neutron diffraction data. Highlights: > Structural, magnetic and electronic properties are probed simultaneously. > A fall in resistivity at high temperatures is associated with cation disorder. > The order-disorder transition is accompanied by the loss of magnetic order. > The structural and magnetic phase transition is preceded by a 2-phase region. > Sulphur loss at high temperatures causes the phase transitions to be irreversible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Electronic Properties of Reduced Transistion Metal Oxide Clusters, M3O8 and M3O8- (M=Cr, W), from photoelectron spectroscopy and quantum chemical calculations

We report a comparative study of reduced transition metal oxide clusters, M3O8- (M = Cr, W) anions and their neutrals, via anion photoelectron spectroscopy (PES) and density functional theory (DFT) and molecular orbital theory (CCSD(T)) calculations. Well-resolved PES spectra are obtained for M3O8- (M = Cr, W) at 193 and 157 nm photon energies. Different PES spectra are observed for M = Cr versus M = W. Extensive DFT and CCSD(T) calculations are performed to locate the ground and low-lying excited states for the neutrals and anions. The ground states of Cr3O8 and Cr3O8- are predicted to be the 3B2 and 4B2 states of a C2v structure, respectively, revealing ferromagnetic spin coupling for Cr 3d electrons. In contrast, the ground states of W3O8 and W3O8- are predicted to be the 1A- state (Cs symmetry) and the 2A1 state (C2v symmetry), respectively, showing strong metal-metal d-d bonding in the anion. The current cluster geometries are in qualitative agreement with prior DFT studies at the PBE level for M = Cr and the B3LYP level for M = W. The BP86 and PW91 functionals significantly outperform the B3LYP functional for the Cr species, in terms of relative energies, electron detachment energies, and electronic excitation energies; whereas the B3LYP functional is better for the W species. In addition, accurate heats of formation for the ground states of M3O8 are calculated from the clustering energies and the heats of formation of MO2 and MO3.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Texture and magnetic properties of exchange bias systems

We report on the magnetic and structural properties of IrMn/CoFe exchange bias systems deposited onto a dual seed layer of NiCr(X)/Ru(5 nm), with X=2, 6, and 20 nm. Samples with the structure NiCr (Xnm)/IrMn (7 nm)/CoFe (3 nm)/Ta (10 nm) with X=2, 6, and 20 nm were prepared by dc sputtering for magnetic characterization. A second set of samples with structure NiCr (Xnm)/IrMn (10 nm) with X=2, 6, and 20 nm were deposited onto TEM grids for structural characterization by TEM. A method of manipulating of the TEM grid to allow a qualitative analysis of the in-plane texture of the samples is described and used to analyze the microstructure of these samples. The microstructure and particularly the texture are correlated with the anisotropy constant (K{sub AF}) of the antiferromagnet (AF) layer, with an optimum NiCr seed layer of 6 nm to give a maximum value of K{sub AF} of 1.2x10{sup 7} ergs/cc.

36 MATERIALS SCIENCE↗

Understanding the structural mechanics of ligated DNA crystals via molecular dynamics simulation

DNA self-assembly is a highly programmable method to construct arbitrary architectures based on sequence complementarity. Among various constructs, DNA crystals are macroscopic crystalline materials formed by assembling motifs via sticky end association. Due to their high structural integrity and size ranging from tens to hundreds of micrometers, DNA crystals offer unique opportunities to study the structural properties and deformation behaviors of DNA assemblies. For example, enzymatic ligation of sticky ends can selectively seal nicks resulting in more robust structures with enhanced mechanical properties. However, the research efforts have been mostly on experiments involving different motif designs, structural optimization, or new synthesis methods, while their mechanics are not yet fully understood. The complex properties of DNA crystals are difficult to study via experiments alone, and numerical simulation can complement and aid the experiments. The coarse-grained molecular dynamics (MD) simulation is a powerful tool that can probe the mechanics of DNA assemblies. Here, we investigate DNA crystals made of four different motif lengths with various ligation patterns (full ligation, major directions, connectors, and in-plane) using oxDNA, an open-source, coarse-grained MD platform. We found that several distinct deformation stages emerge in response to mechanical loading and that the number and the location of ligated nucleotides can significantly modulate structural behaviors. These findings should be useful for predicting crystal properties and thus improving the design.

DNA crystal↗

Structure and mechanical properties of grain boundaries in molybdenum disulfide (MoS 2 )

Molybdenum disulfide (MoS 2 ) is a two-dimensional material widely used as a lubricant in many applications involving mechanical loading under a wide range of operating temperatures. Since many synthesis and processing techniques yield MoS 2 in its polycrystalline form, establishing grain boundary (GB) structure–property relations is key to designing MoS 2 microstructures with tailored properties. Here, we employ classical, reactive atomistic simulations to investigate the structure and mechanical behavior of a wide range of GBs in MoS 2 as a function of temperature. Using a bicrystal MoS 2 geometry, we characterize the atomic structure and calculate the energy of several low-angle GBs. Then, we simulate the tensile deformation behavior of MoS 2 bicrystals at several temperatures. Our results reveal that at temperatures above 100 K, the deformation of MoS 2 bicrystals is characterized by the nucleation of shear bands from GBs that grow, with subsequent loading, into the MoS 2 crystals. At low temperatures, the tensile deformation is characterized by the nucleation and propagation of deformation fronts, resulting in altered bond angles and bond lengths. Quantitative analysis reveals a decrease in the ultimate tensile stress and ultimate failure strain of MoS 2 bicrystals with the increase in temperature. Furthermore, our simulations of the mechanical behavior of metastable GBs reveal that the strength and ductility decrease with the increase in energy of these boundary structures. In broad terms, our work provides future avenues to employ GB engineering as a strategy to tailor the properties of MoS 2 microstructures.

Moore, Robert D. [Lehigh Univ., Bethlehem, PA (Uni↗

Effect of Substituent Location on the Relationship between the Transition Dipole Moments, Difference Static Dipole, and Hydrophobicity in Squaraine Dyes for Quantum Information Devices

Aggregates of organic dyes that exhibit excitonic coupling have a wide array of applications, including medical imaging, organic photovoltaics, and quantum information devices. The optical properties of a dye monomer, as a basis of dye aggregate, can be modified to strengthen excitonic coupling. Squaraine (SQ) dyes are attractive for those applications due to their strong absorbance peak in the visible range. While the effects of substituent types on the optical properties of SQ dyes have been previously examined, the effects of various substituent locations have not yet been investigated. In this study, density functional theory (DFT) and time-dependent density functional theory (TD-DFT) were used to investigate the relationships between SQ substituent location and several key properties of the performance of dye aggregate systems, namely, difference static dipole (Δd), transition dipole moment (μ), hydrophobicity, and the angle (θ) between Δd and μ. We found that attaching substituents along the long axis of the dye could increase μ while placement off the long axis was shown to increase Δd and reduce θ. The reduction in θ is largely due to a change in the direction of Δd as the direction of μ is not significantly affected by substituent position. Hydrophobicity decreases when electron-donating substituents are located close to the nitrogen of the indolenine ring. These results provide insight into the structure–property relationships of SQ dyes and guide the design of dye monomers for aggregate systems with desired properties and performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomistic Computer Simulations of Water Interactions and Dissolution of Inorganic Glasses

Computational simulations at the atomistic level play an increasing important role in understanding the structures, behaviors, and the structure-property relationships of glass and amorphous materials. In this paper, we reviewed atomistic simulation methods ranging from first principles calculations and ab initio molecular dynamics (AIMD), to classical molecular dynamics (MD) and meso-scale kinetic Monte Carlo (KMC) simulations and their applications to glass-water interactions and glass dissolutions. Particularly, the use of these simulation methods in understanding the reaction mechanisms of water with oxide glasses, water-glass interfaces, hydrated porous silica gels formation, the structure and properties of multicomponent glasses, and microstructure evolution are reviewed. Here, the advantages and disadvantageous of these methods are discussed and the current challenges and future direction of atomistic simulations in glass dissolution are presented.

36 MATERIALS SCIENCE↗

Direct prediction of inelastic neutron scattering spectra from the crystal structure*

Abstract Inelastic neutron scattering (INS) is a powerful technique to study vibrational dynamics of materials with several unique advantages. However, analysis and interpretation of INS spectra often require advanced modeling that needs specialized computing resources and relevant expertise. This difficulty is compounded by the limited experimental resources available to perform INS measurements. In this work, we develop a machine-learning based predictive framework which is capable of directly predicting both one-dimensional INS spectra and two-dimensional INS spectra with additional momentum resolution. By integrating symmetry-aware neural networks with autoencoders, and using a large scale synthetic INS database, high-dimensional spectral data are compressed into a latent-space representation, and a high-quality spectra prediction is achieved by using only atomic coordinates as input. Our work offers an efficient approach to predict complex multi-dimensional neutron spectra directly from simple input; it allows for improved efficiency in using the limited INS measurement resources, and sheds light on building structure-property relationships in a variety of on-the-fly experimental data analysis scenarios.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗