Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Aerosol size distribution changes in FIREX-AQ biomass burning plumes: the impact of plume concentration on coagulation and OA condensation/evaporation

Abstract. The evolution of organic aerosol (OA) and aerosol size distributions within smoke plumes is uncertain due to the variability in rates of coagulation and OA condensation/evaporation between different smoke plumes and at different locations within a single plume. We use aircraft data from the FIREX-AQ campaign to evaluate differences in evolving aerosol size distributions, OA, and oxygen to carbon ratios (O:C) between and within smoke plumes during the first several hours of aging as a function of smoke concentration. The observations show that the median particle diameter increases faster in smoke of a higher initial OA concentration (>1000 µg m−3), with diameter growth of over 100 nm in 8 h – despite generally having a net decrease in OA enhancement ratios – than smoke of a lower initial OA concentration (<100 µg m−3), which had net increases in OA. Observations of OA and O:C suggest that evaporation and/or secondary OA formation was greater in less concentrated smoke prior to the first measurement (5–57 min after emission). We simulate the size changes due to coagulation and dilution and adjust for OA condensation/evaporation based on the observed changes in OA. We found that coagulation explains the majority of the diameter growth, with OA evaporation/condensation having a relatively minor impact. We found that mixing between the core and edges of the plume generally occurred on timescales of hours, slow enough to maintain differences in aging between core and edge but too fast to ignore the role of mixing for most of our cases.

54 ENVIRONMENTAL SCIENCES↗

Observations of particle number size distributions and new particle formation in six Indian locations

Atmospheric new particle formation (NPF) is a crucial process driving aerosol number concentrations in the atmosphere; it can significantly impact the evolution of atmospheric aerosol and cloud processes. This study analyses at least 1 year of asynchronous particle number size distributions from six different locations in India. We also analyze the frequency of NPF and its contribution to cloud condensation nuclei (CCN) concentrations. We found that the NPF frequency has a considerable seasonal variability. At the measurement sites analyzed in this study, NPF frequently occurs in March–May (pre-monsoon, about 21% of the days) and is the least common in October–November (post-monsoon, about 7% of the days). Considering the NPF events in all locations, the particle formation rate (J SDS ) varied by more than 2 orders of magnitude (0.001–0.6 cm –3 s –1 ) and the growth rate between the smallest detectable size and 25nm (GR SDS-25nm ) by about 3 orders of magnitude (0.2–17.2nm h –1 ). We found that J SDS was higher by nearly 1 order of magnitude during NPF events in urban areas than mountain sites. GR SDS did not show a systematic difference. Our results showed that NPF events could significantly modulate the shape of particle number size distributions and CCN concentrations in India. The contribution of a given NPF event to CCN concentrations was the highest in urban locations (4.3 × 10 3 cm –3 per event and 1.2 × 10 3 cm –3 per event for 50 and 100nm, respectively) as compared to mountain background sites (2.7 × 10 3 cm –3 per event and 1.0 × 10 3 cm –3 per event, respectively). We emphasize that the physical and chemical pathways responsible for NPF and factors that control its contribution to CCN production require in situ field observations using recent advances in aerosol and its precursor gaseous measurement techniques.

54 ENVIRONMENTAL SCIENCES↗

Particle size distributions from TRACER-MAP

Particle size distributions measured using a custom scanning mobility analyzer (SMPS) and a TSI, Inc. aerodynamic particle sizer (APS). The size distributions measured with the two instruments were merged during data inversion to produce a single distribution spanning a diameter range from approximately 19 nanometers to 15 micrometers. Size-dependent cloud condensation nuclei (CCN) activity measured with a CCN counter operated in parallel to the condensation particle counter in the SMPS are reported separately. The measurements were made from the Baylor University/University of Houston Mobile Air Quality Laboratory (MAQL) between July 5 and August 30, 2022 during the TRACER-MAP project. The trailer moved between five sites in the Houston regions as follows: Aldine: 7/5-7/8, 7/21-7/26, 8/15-8/24 University of Houston: 7/8-7/16, 8/8-8/15 San Jacinto monument: 7/16-7/21 Jones State Forest: 7/26-8/1; 8/24-8/30 AMF site in La Porte: 8/1-8/8

54 ENVIRONMENTAL SCIENCES↗

Particle size distributions from TRACER-MAP

Particle size distributions measured using a custom scanning mobility analyzer (SMPS) and a TSI, Inc. aerodynamic particle sizer (APS). The size distributions measured with the two instruments were merged during data inversion to produce a single distribution spanning a diameter range from approximately 19 nanometers to 15 micrometers. Size-dependent cloud condensation nuclei (CCN) activity measured with a CCN counter operated in parallel to the condensation particle counter in the SMPS are reported separately. The measurements were made from the Baylor University/University of Houston Mobile Air Quality Laboratory (MAQL) between July 5 and August 30, 2022 during the TRACER-MAP project. The trailer moved between five sites in the Houston regions as follows: Aldine: 7/5-7/8, 7/21-7/26, 8/15-8/24 University of Houston: 7/8-7/16, 8/8-8/15 San Jacinto monument: 7/16-7/21 Jones State Forest: 7/26-8/1; 8/24-8/30 AMF site in La Porte: 8/1-8/8

54 ENVIRONMENTAL SCIENCES↗

Hand tool permits shrink sizing of assembled tubing

Portable tool sizes tubing ends without disassembling the tubing installation. The shrink sizing tool is clamped to the tubing and operated by a ratchet wrench. A gear train forces the tubing end against an appropriate die or mandrel to effect the sizing.

Millett, A.↗

The sensing of retinal size.

Perceived size relation to retinal size under reduced observation conditions compared with size-distance invariance hypothesis for binocular and monocular observations

Gogel, W. C.↗

The determination and optimization of (rutile) pigment particle size distributions

A light scattering particle size test which can be used with materials having a broad particle size distribution is described. This test is useful for pigments. The relation between the particle size distribution of a rutile pigment and its optical performance in a gray tint test at low pigment concentration is calculated and compared with experimental data.

Richards, L. W.↗

Methods of computing vocabulary size for the two-parameter rank distribution

A summation method is described for computing the vocabulary size for given parameter values in the 1- and 2-parameter rank distributions. Two methods of determining the asymptotes for the family of 2-parameter rank-distribution curves are also described. Tables are computed and graphs are drawn relating paris of parameter values to the vocabulary size. The partial product formula for the Riemann zeta function is investigated as an approximation to the partial sum formula for the Riemann zeta function. An error bound is established that indicates that the partial product should not be used to approximate the partial sum in calculating the vocabulary size for the 2-parameter rank distribution.

Edmundson, H. P.↗

Analytical investigation of chord size and cooling methods on turbine blade cooling requirements. Book 1: Sections 1 through 8 and appendixes A through I

A study was conducted to determine the effect of chord size on air cooled turbine blades. In the preliminary design phase, eight turbine blade cooling configurations in 0.75-in., 1.0-in., and 1.5-in. chord sizes were analyzed to determine the maximum turbine inlet temperature capabilities. A pin fin convection cooled configuration and a film-impingement cooled configuration were selected for a final design analysis in which the maximum turbine inlet temperature was determined as a function of the cooling air inlet temperature and the turbine inlet total pressure for each of the three chord sizes. The cooling air flow requirements were also determined for a varying cooling air inlet temperature with a constant turbine inlet temperature. It was determined that allowable turbine inlet temperature increases with increasing chord for the convection cooled and transpiration cooled designs, however, the film-convection cooled designs did not have a significant change in turbine inlet temperature with chord.

Faulkner, F. E.↗

Determination of atmospheric particle size distribution from forward scattering data.

Description of an analytic method of reconstructing the particle size distribution of atmospheric aerosols when no a priori information is available regarding the refractive index of the particles, the analytic form of the distribution, the size range, and the size extremal values. The method applies in principle to angle-dependent scattering data at a fixed wave number, or to wave-number-dependent scattering data at a fixed angle, or to a combination of the two. Some results of an angular scan study of the aureole are presented to illustrate the effectiveness of the method. In conclusion, an analysis is made of the efficiency and accuracy of the method, the uniqueness of the inverse solutions, and the stability of the method relative to experimental noise.

Fymat, A. L.↗

A Stokes' velocity photographic method for measuring the size distribution of aerosols

Aerosol particles are allowed to settle in a vertical glass walled vessel, and their settling velocity is determined by photographing them while the light entering the camera is being chopped at a known rate. The settling velocity of each particle can be determined from the photographs, and by applying the Stokes' law, one can calculate the radius of each particle. The Stokes' law for a sphere settling freely in a quiet medium is given. If the volume of the photographed region of the illumination is known, the aerosol number density and size distribution can be obtained. Experiments with alumina particles of given size distributions indicate that the method works accurately. One set of a typical experiment with 3.0-micrometer Al2O3 particles is presented, which shows that the measured size distribution peaks at approximately 3.0 micrometer.

Deepak, A.↗

Estimates of the size of the particles in the rings of Saturn and their cosmogonic implications

Observations are discussed which are consistent with the ring particles having a very high single scattering albedo at radio wavelengths, with multiple scattering effects being important. Comparison of scattering calculations for ice and silicate particles with the radio and radar observations imply a mean particle radius of about 1 cm. The ice bands observed in the near-infrared reflectivity spectra of the rings are formed by scattering within a microstructure on the surface of the ring particles, with the scattering centers being 25 to 125 micrometers in size. The Poynting-Robertson effect has caused a significant spiraling-in of the ring particles, probably resulting in a broadening of the rings. The inferred mean size is consistent with a model in which meteoroid impacts have caused a substantial reduction in the mean particle size from its initial value.

Pollack, J. B.↗

Particle sizes in Comet Bennett /1970 II/

The particle size distribution in the coma and tail of Comet Bennett has been determined by several methods, each sensitive to a particular size range. It is confirmed that a minimum value of the particle density, size, and radiation pressure efficiency function exists at about .00003 to .00010 g/sq cm. The existence of such a cutoff is probably due to the decreasing radiation pressure efficiency for particles smaller than the wavelength of the light being scattered. An exact determination of this cutoff may allow identification of the particle type.

O'Dell, C. R.↗

Propulsion system sizing for powered lift and mechanical flap quiet aircraft

A method of propulsion system sizing for mechanical flap and externally blown flap aircraft is demonstrated. Included in this study is the effect of various levels of noise suppression on the aircraft final design characteristics. Both aircraft are sized to operate from a 3000-ft runway and perform the same mission. For each aircraft concept, propulsion system sizing is demonstrated for two different engine cycles - one having a fan pressure ratio of 1.5 and a bypass ratio of 9 and the other having a fan pressure ratio of 1.25 and a bypass ratio of 17.8. The results presented include the required thrust to weight ratio and wing loading and the resulting gross weight and direct operating costs as functions of the engine noise level for each of the four combinations of engine cycles and aircraft concepts.

Bowles, J. V.↗

Influence of propulsion system size, shape, and location on supersonic aircraft design

The effects of various propulsion system parameters on the characteristics of a supersonic transport were investigated. The effects of arbitrarily scaling engine size on wave drag, friction drag, drag-due-to-lift, wing sizing, airplane balance, and airplane weight were studied. These evaluations were made for two families of nacelle shapes, resulting from typical turbojet and turbofan installations. Also examined were effects of nacelle location, and the wing camber plane deformations required to cancel the nacelle interference pressure field at cruise Mach number (2.7 M) were determined. The most drag-sensitive parameter is found to be nacelle shape. Similarly, wing deformation requirements are found to be primarily affected by nacelle shape. Effects of engine size variations are noted primarily in airplane gross weight.

Bonner, E.↗

Cost and size estimates for an electrochemical bulk energy storage concept

Preliminary capital cost and size estimates were made for an electrochemical bulk energy storage concept. The electrochemical system considered was an electrically rechargeable flow cell with a redox couple. On the basis of preliminary capital cost estimates, size estimates, and several other important considerations, the redox-flow-cell system emerges as having great promise as a bulk energy storage system for power load leveling. The size of this system would be less than 2 percent of that of a comparable pumped hydroelectric plant. The capital cost of a 10-megawatt, 60- and 85-megawatt-hour redox system is estimated to be $190 to $330 per kilowatt. The other important features of the redox system contributing to its load leveling application are its low adverse environmental impact, its high efficiency, its apparent absence of electrochemically-related cycle life limitations, and its fast response.

Warshay, M.↗

Single-domain grain size limits for metallic iron

The theory of superparamagnetic (SP) threshold calculations and single-domain (SD) to nonuniform spin threshold calculations is considered. The SD upper grain size limit and the SP-to-SD threshold size are calculated. The size and shape criteria for the stable SD behavior of metallic iron have implications for lunar magnetism and the mechanism of iron-silicate fractionation in the solar nebula.

Butler, R. F.↗

In situ measurements of particulate number density and size distribution from an aircraft

Two different commercial particulate measuring instruments were flown aboard the NASA Convair 990. A condensation nuclei monitor was utilized to measure particles larger than approximately 0.003 micron in diameter. A specially designed pressurization system was used with this monitor at cabin altitude pressure. A near-forward light scattering counter was used to measure the number and size distribution particles in the size range from 0.5 to 5 microns and greater in diameter. Considerable variation in number density was encountered for both classes of particles at the test altitudes ranging from 5 to 12 km. Presence of clouds could be detected by the light scattering instrument because large numbers of particles would then be registered by the instrument, especially in the size range above 5.0 microns in diameter.

Briehl, D.↗