Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

The Impact of the Substrate Material on the Optical Properties of 2D WSe{sub 2} Monolayers

2D-materials, especially transition metal dichalcogenides (TMDs) have drawn a lot of attention due to their remarkable characteristics rendering them a promising candidate for optical applications. While the basic properties are understood up to now, the influence of the environment has not been studied in detail, yet. Here we highlight a systematic comparison of the optical properties of tungsten diselenide monolayers on different substrates. Subtle changes in the emission spectrum and Raman signature have been found as well as surprisingly pronounced differences in the pump-power-dependent and time-resolved output at higher excitation densities. For all samples, exciton–exciton annihilation can be obtained. Nevertheless an analysis of different pump-dependent decay rates suggests substrate-dependent changes in the diffusion constant as well as exciton Bohr radius.

36 MATERIALS SCIENCE↗

MBE Growth and Structural Properties of GaP and InP Nanowires on a SiC Substrate with a Graphene Layer

The possibility in principle of the MBE (molecular-beam epitaxy) growth of GaP and InP nanowires on a SiC substrate with a graphene layer is demonstrated for the first time. InP nanowires on such a substrate have no stacking faults and possess an ideal crystallographic quality. At the same time, GaP nanowires have structural defects of the type of twins and the reversal of crystallographic phases at the top and at the base. The results of structural measurements demonstrate that the nanowires are formed in the wurtzite phase, which is not typical of bulk III–V materials.

36 MATERIALS SCIENCE↗

Electrical Properties of GaAs Nanowires Grown on Graphene/SiC Hybrid Substrates

The electrical properties of GaAs nanowires grown on a 6H-SiC (0001) substrate covered with graphene single layers and bilayers are studied. The nanowires are grown by molecular-beam epitaxy, with gold as a catalyst. The electrical properties are studied by measuring and analyzing the current–voltage characteristics of single nanowires vertically grown on a substrate. Numerical simulation of the experimental current–voltage curves revealed the presence of a ~0.6-V-high Schottky barrier between the nanowires and graphene. The appearance of the barrier is due to the formation of excess arsenic at the nanowire/graphene interface.

36 MATERIALS SCIENCE↗

Photodetectors with an InGaAs Active Region and InGaP Metamorphic Buffer Layer Grown on GaAs Substrates

The results of studying the reverse dark currents of photodiodes for a wavelength of 1.06 μm grown on a GaAs substrate with the help of an InGaP metamorphic buffer layer are presented. The metalorganic chemical vapor epitaxy (MOCVD) growth technology of InGaP metamorphic buffer layers with a stepwise composition variation is developed. Photodiodes with a photosensitive area of 1 mm in diameter and radiation input through the substrate are fabricated. The photodiode dark current at room temperature and reverse bias of –3 V was 50 nA. It is assumed that the bulk component of the dark current is caused by the tunneling mechanism through the trap levels.

36 MATERIALS SCIENCE↗

Features of the Selective Growth of GaN Nanorods on Patterned c-Sapphire Substrates of Various Configurations

The growth features of GaN nanorods on patterned c-sapphire substrates with a regular microcone array having a different density and base diameter in the ranges of (1–5) × 10{sup 7} cm{sup –2} and 2.5–3.5 μm, respectively, are investigated. The kinetics is studied and the selective-growth regimes are determined for single GaN nanorods with a diameter of 30–100 nm at the vertices of microcones under radically lower growth rates on their slopes. The effect of the configuration of microcones, the substrate temperature, the roughness of the initial surface, and the presence of indium as a surfactant on the degree of growth selectivity is investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Laser Annealing of Thin ITO Films on Flexible Organic Substrates

Indium–tin oxide (ITO) thin films on polyethylene-terephthalate film substrates are fabricated at room temperature by reactive magnetron sputtering. The minimum of the resistivity of ITO films formed at room temperature is 4.5 × 10 -4 Ω cm. The laser annealing of ITO films from 140 to 600 nm in thickness increases their conductivity from 10 to 24% depending on the energy density to the film and irradiation dose. It is established that the laser annealing of films up to 250 nm in thickness is efficient at an energy density in the range from 12 to 35 mJ/cm 2 . Films from 390 to 600 nm in thickness should be annealed by laser radiation with an energy density of no lower than 46 mJ/cm 2 . A model problem taking into account the influence of radiative cooling and heat exchange of the film and the substrate on the variation in the film temperature over time during laser annealing is considered. A one-dimensional thermal conductivity equation for a bilayer medium is used. The maximal stresses in the ITO film under various annealing modes are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular-Beam Epitaxy of Two-Dimensional GaSe Layers on GaAs(001) and GaAs(112) Substrates: Structural and Optical Properties

The results of studies of the structural and optical properties of two-dimensional GaSe layers grown by molecular-beam epitaxy on GaAs(001) and GaAs(112) substrates using a valve cracking cell for the Se source are reported. The influence of the MBE growth parameters (the substrate temperature, Ga flux intensity, Se/Ga incident flux ratio) on the surface morphology of the layers is studied. By means of transmission electron microscopy, electron diffraction technique, and Raman spectroscopy, it is shown that the structure of the GaSe layers corresponds to the γ-GaSe polytype. From X-ray diffraction analysis, it is established that there exist α-Ga{sub 2}Se{sub 3} inclusions in the GaSe layers grown under conditions of high enrichment of the growth surface with Se.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the stresses caused by substrate on the electrical conductivity of ferromagnetic manganite lanthanum–barium films

This is a complex study of the electrophysical and magnetic characteristics of epitaxial manganite La{sub 0.7}Ba{sub 0.3}MnO{sub 3} (LBMO) films under conditions of crystal structure stresses caused by misfit in the lattice parameters of the LBMO crystal and a substrate. The substrate used had the lattice parameter smaller than that in the LBMO crystal. It is shown that the temperature dependence of the electrical resistance of the films at low temperatures is not dependent on the existence of stresses in the film and agrees well with the calculation with allowance made for the interaction of carriers with magnetic excitations in the presence of strongly correlated electronic states. The study of the ferromagnetic resonance line indicates an inhomogeneity of the ferromagnetic phase in the LBMO films and the increase in the ferromagnetic resonance line width with decreasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave properties of high-temperature Josephson contacts on a sapphire bicrystal substrate

HTS bicrystal junctions up to 50 μm wide on sapphire substrates have been studied. The dependences of the critical current on the temperature and external magnetic field of these contacts have been measured. The irradiation of the Josephson junction on a sapphire substrate at the frequency of 73 GHz at the temperature of 77 K resulted in the appearance of Shapiro steps in the current–voltage characteristic (IVC) at the voltage of 150 μV. The possibility of using such contacts in voltage standards at the temperature of 77 K in the ranges of microwave and terahertz frequencies has been analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of the Substrate Material on the Structure and Electrophysical Properties of Ba{sub x}Sr{sub 1–} {sub x}TiO{sub 3} Thin Films

The high-frequency spraying method has been used to produce Ba{sub x}Sr{sub 1–x}TiO{sub 3} thin films on (111)Pt/(100)Si and SiOx/(100)Si substrates. The synthesized films have proven to be single-phase with a polycrystalline structure. In this paper, we show the influence of the platinum sublayer on such parameters as roughness, mean size of grains, and the local polarization of Ba{sub x}Sr{sub 1–x}TiO{sub 3} thin films. Possible mechanisms of the obtained results related to the intragrain conductivity and the nature of interaction of a ferroelectric film with its substrate are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carbon Nanostructures on a Semiconductor Substrate

The analytical expressions for the density of states and the occupation numbers are obtained for simple models of carbon nanostructures (graphene–boron nitride lateral heterostructure, decorated zigzag edges of semi-infinity graphene and graphene nanoribbons, and decorated carbyne). The main attention is placed to the strong-coupling regime of the nanostructures with a semiconducting substrate. The numerical estimations are given for the SiC substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetoelastic Waves in Submicron Yttrium–Iron Garnet Films Manufactured by Means of Ion-Beam Sputtering onto Gadolinium–Gallium Garnet Substrates

A series of equidistant oscillations have been revealed in the transmission spectrum and dispersion law of Damon–Eshbach surface magnetostatic waves (SMSWs) propagating in submicron (200-nm) yttrium–iron garnet (YIG) films manufactured by means of ion-beam sputtering onto gadolinium–gallium garnet (GGG) substrates. These oscillations correspond to the excitation of magnetoelastic waves in the YIG–GGG structure at frequencies of resonant interaction between the surface magnetostatic waves and the elastic shear modes of the wave-guiding YIG–GGG structure. The obtained results show that the studied YIG films are characterized by an efficient magnetoelastic coupling between their spin and elastic subsystems and the matching of acoustic impedances at the YIG–GGG interface, thus providing the possibility to consider the ion-beam sputtering of YIG films onto GGG substrates as a promising technology for the creation of magnonic and straintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Acoustic vibrations in integrated electro-optic modulators on substrates of lithium niobate

The processes of the excitation of acoustic vibrations and their influence on the optical signals in integrated electro-optic modulators on substrates of lithium niobate have been investigated. The resonant frequencies of the excitation of substrate vibrational modes have been determined. It has been shown that acoustic vibrations can make a significant contribution to the modulator transfer characteristic at frequencies up to several hundred megahertz, which should be taken into account when using the modulators at low frequencies, for example, as a part of fiber-optic sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying the Surface Conductivity of a Thallium Bilayer on Si(111) Substrate after Adsorption of Lithium and Rubidium

Changes in the state of a thallium bilayer on Si(111) substrate, Si(111)6 × 6–Tl, after adsorption of lithium and rubidium were studied using low-energy electron-diffraction and four-point probe-conductivity measurements. New surface reconstructions 5 × 1 and 5√3×5√3 were observed after the adsorption of lithium, and 2 × 2 and √3×√3 reconstructions appeared after the adsorption of rubidium. The surface conductivity of silicon substrates was studied as a function of the dose of deposited adsorbate. It is established that the formation of both 5 × 1 and 2 × 2 reconstructions retains the conducting properties of a two-dimensional channel constituted by the thallium bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semipolar GaN Layers Grown on Nanostructured Si(100) Substrate

We propose a new method for growing semipolar GaN films on a Si(100) substrate with an array of sub-100-nm-sized V-grooves formed on the surface. It is shown that, using such a nanostructured substrate for metalorganic hydride vapor-phase epitaxy, it is possible to obtain GaN (101̅1̇) epilayers deviating by an angle of about 62° from the polar direction and having an X-ray rocking curve with a minimum FWHM value of ω{sub θ} ~ 60 arcmin.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Generation of a Photoacoustic Signal in Two-Layer Transparent Samples on an Absorbing Substrate

A theory of generation of a photoacoustic signal in a two-layer transparent sample on an absorbing substrate to a buffer gas of a photoacoustic cell has been developed. We have shown that the frequency dependence of the photoacoustic signal amplitude excited in the absorbing substrate obeys the law ∝ ω{sup –1}, when a free path of photons is less than the thermal diffusion length, and is proportional to ω{sup –3/2} in the opposite case.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxy of GaN(0001) and GaN(10 1-bar 1) Layers on Si(100) Substrate

Two different approaches to epitaxy of 4-μm-thick layers of polar GaN(0001) and semipolar GaN(10 1-bar 1) on a V-shaped nanostructured Si(100) substrate with nanometer-thick SiC and AlN buffer layers have been experimentally demonstrated. The GaN(0001) layers were synthesized by hydride vapor-phase epitaxy, and GaN(10 1-bar 1) layers, by metal-organic vapor-phase epitaxy, with the growth completed by hydride vapor-phase epitaxy. It was shown that layers of the polar GaN(0002) have a longitudinal elastic stress of –0.45 GPa and the minimum full width at half-maximum of the X-ray diffraction rocking curve ω{sub θ} ~ 45 arcmin, whereas for the semipolar GaN(10 1-bar 1), these values are –0.29 GPa and ω{sub θ} ~ 22 arcmin, respectively. A conclusion is drawn that the combined technology of semipolar gallium nitride on a silicon (100) substrate is promising.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growing III–V Semiconductor Heterostructures on SiC/Si Substrates

A three-layer heterostructure consisting of AlN (∼0.72 μm thick), AlGaN (∼ 1.82 μm thick), and GaN (∼2.2 μm thick) layers has been grown by hydride–chloride vapor phase epitaxy (HVPE) method on a Si substrate with a SiC buffer nanolayer. The heterostructure was studied using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and other techniques. The results showed that SiC/Si substrates can be used for growing films of III–V semiconductor compounds by HVPE at a high rate (~66 μm/h) free of cracks and with small residual elastic stresses (~160 MPa).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗