Results for “STANDARDS” — Page 99

DOE OSTI2013

Examination of a Standardized Test for Evaluating the Degree of Cure of EVA Encapsulation: Preprint

The curing of cross-linkable encapsulation is a critical consideration for photovoltaic (PV) modules manufactured using a lamination process. Concerns related to ethylene-co-vinyl acetate (EVA) include the quality (e.g., expiration and uniformity) of the films or completion (duration) of the cross-linking of the EVA within a laminator. Because these issues are important to both EVA and module manufacturers, an international standard has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the degree of cure for EVA encapsulation. The present draft of the standard calls for the use of differential scanning calorimetry (DSC) as the rapid, enabling secondary (test) method. Both the residual enthalpy- and melt/freeze-DSC methods are identified. The DSC methods are calibrated against the gel content test, the primary (reference) method. Aspects of other established methods, including indentation and rotor cure metering, were considered by the group. Key details of the test procedure will be described.

14 SOLAR ENERGY↗

DOE OSTI2013

Examination of a Standardized Test for Evaluating the Degree of Cure of EVA Encapsulation (Presentation)

The curing of cross-linkable encapsulation is a critical consideration for photovoltaic (PV) modules manufactured using a lamination process. Concerns related to ethylene-co-vinyl acetate (EVA) include the quality (e.g., expiration and uniformity) of the films or completion (duration) of the cross-linking of the EVA within a laminator. Because these issues are important to both EVA and module manufacturers, an international standard has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the degree of cure for EVA encapsulation. The present draft of the standard calls for the use of differential scanning calorimetry (DSC) as the rapid, enabling secondary (test) method. Both the residual enthalpy- and melt/freeze-DSC methods are identified. The DSC methods are calibrated against the gel content test, the primary (reference) method. Aspects of other established methods, including indentation and rotor cure metering, were considered by the group. Key details of the test procedure will be described.

14 SOLAR ENERGY↗

DOE OSTI2014

Tool coupling for the design and operation of building energy and control systems based on the Functional Mock-up Interface standard

This paper describes software tools developed at the Lawrence Berkeley National Laboratory (LBNL) that can be coupled through the Functional Mock-up Interface standard in support of the design and operation of building energy and control systems. These tools have been developed to address the gaps and limitations encountered in legacy simulation tools. These tools were originally designed for the analysis of individual domains of buildings, and have been difficult to integrate with other tools for runtime data exchange. The coupling has been realized by use of the Functional Mock-up Interface for co-simulation, which standardizes an application programming interface for simulator interoperability that has been adopted in a variety of industrial domains. As a variety of coupling scenarios are possible, this paper provides users with guidance on what coupling may be best suited for their application. Furthermore, the paper illustrates how tools can be integrated into a building management system to support the operation of buildings. These tools may be a design model that is used for real-time performance monitoring, a fault detection and diagnostics algorithm, or a control sequence, each of which may be exported as a Functional Mock-up Unit and made available in a building management system as an input/output block. We anticipate that this capability can contribute to bridging the observed performance gap between design and operational energy use of buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2013

An International Survey of Electric Storage Tank Water Heater Efficiency and Standards

Water heating is a main consumer of energy in households, especially in temperate and cold climates. In South Africa, where hot water is typically provided by electric resistance storage tank water heaters (geysers), water heating energy consumption exceeds cooking, refrigeration, and lighting to be the most consumptive single electric appliance in the home. A recent analysis for the Department of Trade and Industry (DTI) performed by the authors estimated that standing losses from electric geysers contributed over 1,000 kWh to the annual electricity bill for South African households that used them. In order to reduce this burden, the South African government is currently pursuing a programme of Energy Efficiency Standards and Labelling (EES&L) for electric appliances, including geysers. In addition, Eskom has a history of promoting heat pump water heaters (HPWH) through incentive programs, which can further reduce energy consumption. This paper provides a survey of international electric storage water heater test procedures and efficiency metrics which can serve as a reference for comparison with proposed geyser standards and ratings in South Africa. Additionally it provides a sample of efficiency technologies employed to improve the efficiency of electric storage water heaters, and outlines programs to promote adoption of improved efficiency. Finally, it surveys current programs used to promote HPWH and considers the potential for this technology to address peak demand more effectively than reduction of standby losses alone

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2016

Les Houches 2015: Physics at TeV Colliders Standard Model Working Group Report

This Report summarizes the proceedings of the 2015 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt with (I) new developments relevant for high precision Standard Model calculations, (II) the new PDF4LHC parton distributions, (III) issues in the theoretical description of the production of Standard Model Higgs bosons and how to relate experimental measurements, (IV) a host of phenomenological studies essential for comparing LHC data from Run I with theoretical predictions and projections for future measurements in Run II, and (V) new developments in Monte Carlo event generators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2017

2016 Standard Scenarios Report: A U.S. Electricity Sector Outlook

This is the webinar presentation deck used to present the 2016 Standard Scenarios work. It discusses the Annual Technology Baseline (ATB) detailed cost and performance projections for electricity-generating technologies and the standard scenarios of the power sector modeling using ATB inputs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2017

Standardized Canisters for Spent Nuclear Fuel: Their Potential Impact and a Proposed Path Forward

This paper describes an evaluation completed in Fiscal Year 2016 (FY16) that investigates using standardized triple-purpose (storage, transportation, and disposal) canisters within an integrated waste management system (IWMS). The IWMS in this particular evaluation is focused on management of commercial spent nuclear fuel (SNF). Incorporation of a standardized canister system into the IWMS provides an opportunity to develop an integrated approach to address storage, transportation, and disposal issues. Regardless of implementation timing and method, deployment of such a canister system could cause significant system-wide impacts. Over the past few years, a number of system analyses have been performed for the US Department of Energy (DOE), Office of Nuclear Energy (NE) using logistic simulations to evaluate the impacts of incorporating these smaller canisters into the IWMS. Furthermore, these simulations predict the amount of resources (e.g., staff, canisters/casks, railcars, facilities), the size of facilities, the timing of operations, and rough-order-of-magnitude (ROM) cost estimates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2016

Toward a Standardized ODH Analysis Technique

Standardization of ODH analysis and mitigation policy thus represents an opportunity for the cryogenic community. There are several benefits for industry and government facilities to develop an applicable unified standard for ODH. The number of reviewers would increase, and review projects across different facilities would be simpler. Here, it would also present the opportunity for the community to broaden the development of expertise in modeling complicated flow geometries.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2018

Les Houches 2017: Physics at TeV Colliders Standard Model Working Group Report

This Report summarizes the proceedings of the 2017 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt with (I) new developments relevant for high precision Standard Model calculations, (II) theoretical uncertainties and dataset dependence of parton distribution functions, (III) new developments in jet substructure techniques, (IV) issues in the theoretical description of the production of Standard Model Higgs bosons and how to relate experimental measurements, (V) phenomenological studies essential for comparing LHC data from Run II with theoretical predictions and projections for future measurements, and (VI) new developments in Monte Carlo event generators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2018

Advances in UAV Applications and Propulsion Technologies Drive the Development of UAV Propulsion Standards

The number of small unmanned aerial vehicles (UAVs) used for private and commercial applications is growing exponentially, beyond the domain of hobby enthusiasts. However, standards development has not been keeping up with the applications and technologies now available. The advent of inexpensive battery-powered quadcopters as stable aerial photography and remote-viewing platforms has expanded the utility of these systems into commercial and private applications for inspection and surveillance. With drone-delivered packages on the horizon, the potential for expansion will be even higher. These developments need to be incorporated into standards being produced for UAVs and propulsion systems.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2018

Standardized and Cost-Effective Benthic Habitat Mapping Tools for Marine and Hydrokinetic Site Environmental Assessments

A variety of techniques have been used for baseline benthic habitat characterization and monitoring at marine and hydrokinetic (MHK) sites. A lack of standardization has led to expensive efforts that can be confusing for regulators and stakeholders evaluating these sites. Benthic habitat maps have traditionally been developed from a suite of geophysical data, including ultibeam echosounder (MBES) bathymetry and backscatter, side scan sonar, imagery from deployed camera systems, and/or sediment sample chemical and biological data. Integral is developing a computer vision (CV) system for automating the measurement of key physical and biological features in sediment profile image (SPI) and seafloor plan view (PV) imagery so that image-derived data can be efficiently integrated with other data sets to create standardized benthic habitat maps at MHK facilities.

16 TIDAL AND WAVE POWER↗

DOE OSTI2020

Standardized Architecture for a Mega-Biobank Phenomic Library: The Million Veteran Program (MVP)

Electronic health records (EHRs) provide a wealth of data for phenotype development in population health studies, and researchers invest considerable time to curate data elements and validate disease definitions. The ability to reproduce well-defined phenotypes increases data quality, comparability of results and expedites research. In this paper, we present a standardized approach to organize and capture phenotype definitions, resulting in the creation of an open, online repository of phenotypes. This resource captures phenotype development, provenance and process from the Million Veteran Program, a national mega-biobank embedded in the Veterans Health Administration (VHA). To ensure that the repository is searchable, extendable, and sustainable, it is necessary to develop both a proper digital catalog architecture and underlying metadata infrastructure to enable effective management of the data fields required to define each phenotype. Our methods provide a resource for VHA investigators and a roadmap for researchers interested in standardizing their phenotype definitions to increase portability.

Knight, Kathryn↗

DOE OSTI2021

Making Data-Driven Policy Decisions for the Nation’s First Building Energy Performance Standards

Nearly every major U.S. city has committed itself to ambitious climate action goals – for Washington, DC this means a 50 percent reduction in greenhouse gases by 2032 and carbon neutrality by 2050. In support of these goals, Washington, DC has passed one of the most aggressive and practical climate action bills in the nation—with the Clean Energy DC Omnibus Act, DC became the first city in the U.S. to adopt energy performance standards for existing buildings. DC’s Building Energy Performance Standards (BEPS) require energy efficiency improvements for all commercial and multifamily buildings that do not meet a sector-specific minimum ENERGY STAR score or equivalent metric, with iterative compliance cycles every five years that will accelerate the pace of whole building retrofits. This paper explores this revolutionary policy framework and uses two data analysis projects that DC conducted to evaluate the potential impact of the BEPS and move towards carbon neutrality. First, we analyze the potential energy savings and greenhouse gas reductions, as well as potential cost impacts, from the implementation of a BEPS policy in DC We then examine the role of BEPS in a carbon neutrality strategy, how BEPS savings iterate over time, and what additional existing building improvements will be driven by the gravitational pull of new building codes on median performance. The paper highlights the benefits and limitations of such data-driven approaches to support policy decisions. Finally, we will review ongoing BEPS implementation, including expected policy directions, critical supportive programs, and lessons learned to date.

Bergfeld, Katie↗

DOE OSTI2020

The Need for a Maximum Intensity Accident in ANS 8-Series Standards

Y-12 has installed one CAAS system under the ANS 8.3 framework as a safety significant system, and is in the process of designing, installing, and qualifying another. As a safety significant system, the Y-12 CAAS is required to demonstrate that it is able to perform its function and actuate an alarm when exposed to the radiation from both a Minimum Accident of Concern and a maximum intensity accident. The ANS 8-series standards do not present a maximum accident to be considered, nor do they specify dose rate tolerance requirements, leading CAAS vendors to potentially use other standards that provide inadequate criteria. A maximum intensity accident is proposed, and the effects of this accident on CAAS analysis and the vendor’s equipment qualification are discussed

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Using an Absolute Cavity Pyrgeometer to Validate the Calibration of a Transfer Standard Pyrgeometer Outdoors, Independent from the Reference Value of the Atmospheric Longwave Irradiance

A unique method of pyrgeometer calibration has been developed to improve the measurement uncertainty [1]. The results of this method yielded irradiance values within ±3 W/m2 of those traceable to the World InfraRed Standard Group (WISG). The ACPs and pyrgeometer model PIR were deployed outdoors, and the irradiance measured by the PIR was compared against the irradiance measured by ACP95F3. Based on the results it is possible to achieve an uncertainty of ± 3.51 W/m2. These results suggest that the PIR calibration method might be useful in addressing the international need for a secondary standard pyrgeometer traceable to SI.

absolute cavity pyrgeometer↗

DOE OSTI2021

“Frequency” and the PMU standard

The Phasor Measurement Unit (PMU) has revolutionized power system management by providing high-resolution, time-stamped, spatial, and temporal measure¬ments of the state of power systems. However, the standards defining the measured quantities have ambiguities that cause uncertainty, irreproducibility, and loss of interoperability during periods of change where the measurements should have the greatest value. This paper examines PMU frequency measurement to highlight the problems. It develops some suggestions for the scope and the next evolutionary improvements to the documentary standards. The aim is to improve the meaningfulness and trustworthiness of dynamic power system measurements.

Frequency, rate of change of frequency, definition↗

DOE OSTI2021

Challenges of Interpreting and Applying New IPC-J-STD-001 Cleanliness Standards in High-Reliability Applications

The electronics industry has rapidly and widely embraced the replacement of ROSE testing with an SIR-focused approach to testing for certification of a qualified manufacturing plan. These new cleanliness documentation standards, housed in IPC J-STD-001 Rev. H, have just begun to impact electronics manufacturers as design and production teams work through how to meet them. This research focuses on the particular challenges of applying these new standards in high-reliability product applications, through the lens of interpreting SIR test results and what they mean for process capability, repeatability and diagnosing a need for process changes. The experiments examined a variety of factors that influence SIR results and suggest areas where SIR test plans can be greatly improved.

Capen, William↗

DOE OSTI2020

Standardized Architecture for a Mega-Biobank Phenomic Library: The Million Veteran Program (MVP)

Electronic health records (EHRs) provide a wealth of data for phenotype development in population health studies, and researchers invest considerable time to curate data elements and validate disease definitions. The ability to reproduce well-defined phenotypes increases data quality, comparability of results and expedites research. In this paper, we present a standardized approach to organize and capture phenotype definitions, resulting in the creation of an open, online repository of phenotypes. This resource captures phenotype development, provenance and process from the Million Veteran Program, a national mega-biobank embedded in the Veterans Health Administration (VHA). To ensure that the repository is searchable, extendable, and sustainable, it is necessary to develop both a proper digital catalog architecture and underlying metadata infrastructure to enable effective management of the data fields required to define each phenotype. Our methods provide a resource for VHA investigators and a roadmap for researchers interested in standardizing their phenotype definitions to increase portability.

Knight, Kathryn↗