Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Reflection of a thick planar shock wave from a coplanar surface

The reflection of a thick shock wave from an adsorbing surface has been studied for argon and neon test gases using the direct simulation Monte Carlo method and laboratory shock-tube experiments. In the simulation, collisions between gas atoms were calculated with a point-center repulsive intermolecular potential, and collisions between gas atoms and the surface were described by a simple two-parameter model which includes the effects of adsorption and thermal accommodation. Experimental data included normal stress and temperature time histories on the surface of a shock-tube and wall. These data and published data of density variations near the end wall were compared with simulation results to assess the influence of adsorption and accommodation on the flowfield and the surface and also to infer optimum values for the surface-interaction model parameters. Good quantitative agreement between simulation and laboratory data was found with this simple surface-interaction model.

Deiwert, G. S.↗

Reflected-wave maser

Reflected wave maser amplifier has significantly greater bandwidth than conventional maser amplifiers. Unit needs no retuning to receive wide range of frequencies.

Clauss, R. C.↗

Reflection beam isolator for submillimeter wavelengths

Magnetoplasma reflection beam isolators for submillimeter wave use are discussed. The basic configuration used is that of the Kerr transverse magneto-optical effect. Theoretical and experimental data at 337 microns using InSb as a plasma are given.

Kanda, M.↗

Reflective superinsulation materials

Reflective superinsulation films are gradually being adapted for use in civilian thermal products. A wide range of their applications in emergency equipment and lightweight clothing is described.

Source record↗

The influence of inhomogeneity of the reflectivity distribution on the accuracy of its measurement

The influence of pulse volume dimensions on the accuracy of reflectivity from various clouds is considered. It is shown that due to the spatial averaging and the inhomogeneities of the clouds, the dependence frequently breaks down, which is a cause of lower values of the spatial distribution estimate. Values of the corrections calculated for various conditions are presented.

Salman, Y. M.↗

Method of representation of acoustic spectra and reflection corrections applied to externally blown flap noise

A computer method for obtaining a rational function representation of an acoustic spectrum and for correcting reflection effects is introduced. The functional representation provides a means of compact storage of data and the nucleus of the data analysis method. The method is applied to noise from a full-scale externally blown flap system with a quiet 6:1 bypass ratio turbofan engine and a three-flap wing section designed to simulate the take-off condition of a conceptual STOL aircraft.

Miles, J. H.↗

A laboratory study of the diffuse reflectance spectra of frosts occurring on astronomical objects

Mechanical, optical, and operating properties of an experiment chamber are examined and possible sample contamination difficulty is explained. The mechanical and operational characteristics of this apparatus are well suited for the study of the reflectance spectra of frosts. The infrared energy available at the detector is low and steps to increase the energy and the responsivity of the detector were taken. The problem of a standard diffuse reflector which is useful in the far ultraviolet region is considered and it is suggested that bright gold be used as the standard.

Glaser, F. M.↗

Reflectance of vegetation, soil, and water

The author has identified the following significant results. Bands 4, 5, and 7 and 5, 6, and 7 were best for distinguishing among crop and soil categories in ERTS-1 SCENES 1182-16322 (1-21-73) and 1308-16323 (5-21-73) respectively. Chlorotic sorghum areas 2.8 acres or larger in size were identified on a computer printout of band 5 data. Reflectance of crop residues was more often different from bare soil in band 4 than in bands 5, 6, and 7. Simultaneously acquired aircraft and spacecraft MSS data indicated that spacecraft surveys are as reliable as aircraft surveys. ERTS-1 data were successfully used to estimate acreage of citrus, cotton, and sorghum as well as idle crop land.

Wiegand, C. L.↗

A photometric function for diffuse reflection by particulate materials

A photometric function is proposed to describe the diffuse reflection of radiation by particulate materials. Both multiple scattering and the dominant effects of particle shadowing are included and the function is verified by comparisons with the photometries of laboratory surfaces. Brightness measurements of planetary and other diffusely scattering surfaces can be used to calculate the brightness for geometries other than those used in the measurements and for which the Minnaert function does not apply. The measurements also can be directly related to such surface characteristics as particle size, single-particle albedo, and compactness.

Meador, W. E.↗

Interactions of satellite-speed helium atoms with satellite-surfaces. 1: Spatial distributions of reflected helium atoms

Interactions of satellite-speed helium atoms with practical satellite surfaces were investigated experimentally, and spatial distributions of satellite-speed helium beams scattered from four different engineering surfaces were measured. The 7000 m/sec helium beams were produced using an arc-heated supersonic molecular beam source. The test surfaces included cleaned 6061-T6 aluminum plate, anodized aluminum foil, white paint, and quartz surfaces. Both in-plane (in the plane containing the incident beam and the surface normal) and out-of-plane spatial distributions of reflected helium atoms were measured for six different incidence angles (0, 15, 30, 45, 60, and 75 deg from the surface normal). It was found that a large fraction of the incident helium atoms were scattered back in the vicinity of the incoming beam, particularly in the case of glancing incidence angles. This unexpected scattering feature results perhaps from the gross roughness of these test surfaces. This prominent backscattering could yield drag coefficients which are higher than for surfaces with either forward-lobed or diffusive (cosine) scattering patterns.

Liu, S. M.↗

An improved technique for determining reflection from semi-infinite atmospheres with linearly anisotropic phase functions

A solution to the problem of reflection from a semi-infinite atmosphere is presented, based upon Chandrasekhar's H-function method for linearly anisotropic phase functions. A modification to the Gauss quadrature formula which gives about the same accuracy with 10 points as the conventional Gauss quadrature does with 100 points was developed. A computer program achieving this solution is described and results are presented for several illustrative cases.

Fricke, C. L.↗

Asteroids - Spectral reflectance and color characteristics

We present visible and near-infrared spectral reflectance curves for 35 asteroids, making a total sample of 67 including our previous work. Several previously unknown spectral types have been discovered. Absorption bands and other features, from which information about the surface composition of the asteroids can be derived, continue to appear. Sampling statistics suggest we have observed about half of the significantly different mineralogical assemblages present in the asteroid belt. There is a general, but imperfect, correlation between spectral type and semimajor axis, which is consistent with the hypothesis that meteorites are derived from the asteroid belt. The color-frequency histogram for the 67 objects is bimodal, probably associated with 'stony' objects and 'carbonaceous' objects. Hirayama family pairs usually show disparate spectral types. 19 Fortuna may show strikingly different photometric properties on opposite sides.

Mccord, T. B.↗

A millimeter-wave reflection-beam isolator

A new and simple type of millimeter-wave isolator using a solid-state magnetoplasma in a reflection-beam system is described. Some data are presented showing performance at 94 GHz. Practical considerations indicate that performance should be much closer to ideal at higher frequencies.

Kanda, M.↗

Ignition of partially shattered liquid fuel drops in a reflected shock wave environment

An experimental investigation of the ignition of individual fuel drops after their interaction with an incident and a reflected shock wave near the end wall of a shock tube has been carried out. The influence of the aerodynamic shattering of the fuel drop by the convective flow on the ignition characteristics has been examined by varying the drop-end wall separation distance. Data are presented which show the ignition delay times to be a function of the various experimental conditions encountered in this study. A comparison is made with previous investigations concerning the ignition of a liquid fuel drop due only to the interaction with an incident shock wave.

Wierzba, A. S.↗

The spectral reflectivity of select areas on Europa

The July 12, 1973, occultation of Europa by Io was observed in 30 wavelength channels in the spectral region between 3200 and 11,000 A with the 200-inch Hale telescope and a multichannel spectrometer. The data are presented in absolute units above the earth's atmosphere and are analyzed to obtain the spectral reflectivity of seven localized areas on the disk of Europa centered on 324 deg W longitude. The equatorial material is confirmed to be darker than the eastward-skewed bright north polar cap and a hint is evident that the darker material may be somewhat redder than the cap material.

Greene, T. F.↗

Mach reflection associated with over-expanded nozzle free jet flows

The occurrence of Mach reflection within the over-expanded nozzle free jet flow has been examined. A flow model emphasizing the interaction between the outer and central core streams has been developed to deal with flow situations where detailed inviscid calculations of the flowfield with Mach reflexion are not possible. The results obtained show reasonably good agreement with the available experimental data. This method has also produced comparable results where detailed calculations of the flowfield are possible.

Chow, W. L.↗

Measurement of transient reflectance

Real-time reflectometer, adjusted to a fraction of a second, monitors transient effects and allows sample to be exposed to environment continuously. Reflectance and reference signals share same optical path, minimizing extraneous effects.

Zwiener, J. M.↗

Low-reflectivity spectrally selective coating

Mirror, with area of low reflectivity, replaces neutral-density transmission filter in star-tracking system, increasing reliability. It may have applications in other optical systems.

Zaniewski, J. J.↗