Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al 0.3 CoCrFeNi high entropy alloy

A successful demonstration of applying integrated strengthening using Hall-Petch strengthening (grains size effect) and precipitation strengthening is shown in the fcc based high entropy alloy (HEA) Al0.3CoCrFeNi, leading to quantitative determinations of the Hall-Petch coefficients for both hardness and tensile yield strength, aswell as the enhancements in the yield strength fromtwo distinct types of ordered precipitates, L12 and B2. An excellent combination of yield strength (~490MPa), ultimate tensile strength (~850MPa), and ductility (~45% elongation) was achieved by optimizing and coupling both strengtheningmechanisms, resulting from a refined grain size as well as both L12 and B2 ordered precipitates. This opens up new avenues for the future development of HEAs, with the appropriate balance of properties required for engineering applications.

Gwalani, B.↗

Comparison of structural and luminescence properties of Dy{sub 2}O{sub 3} nanopowders synthesized by co-precipitation and green combustion routes

Highlights: • Dy{sub 2}O{sub 3} nanopowders were prepared by co-precipitation and eco-friendly green combustion route using plant latex. • Both the products show excellent chromaticity coordinates in the white region, which were quite useful for white LED’s. • Thermoluminescence response of the Dy{sub 2}O{sub 3} product prepared by green synthesis was higher when compared to co-precipitation route. • Structural parameters of Dy{sub 2}O{sub 3} were estimated using Rietveld refinement. • The development of nanosize materials using eco-friendly resources was an attractive non-hazardous chemical route. - Abstract: Dysprosium oxide (Dy{sub 2}O{sub 3}) nanopowders were prepared by co-precipitation (CP) and eco-friendly green combustion (GC) routes. SEM micrographs prepared by CP route show smooth rods with various lengths and diameters while, GC route show porous, agglomerated particles. The results were further confirmed by TEM. Thermoluminescence (TL) responses of the nanopowder prepared by both the routes were studied using γ-rays. A well resolved glow peak at 353 °C along with less intense peak at 183 °C was observed in GC route while, in CP a single glow peak at 364 °C was observed. The kinetic parameters were estimated using Chen’s glow peak route. Photoluminescence (PL) of Dy{sub 2}O{sub 3} shows peaks at 481, 577, 666 and 756 nm which were attributed to Dy{sup 3+} transitions of {sup 4}F{sub 9/2}⟶{sup 6}H{sub 15/2}, {sup 6}H{sub 13/2}, {sup 6}H{sub 11/2} and {sup 6}H{sub 9/2}, respectively. Color co-ordinate values were located in the white region as a result the product may be useful for the fabrication of WLED’S.

36 MATERIALS SCIENCE↗

Dose and dose rate effects on the microstructural and mechanical stability of long-range ordered precipitates in Inconel 718

Nickel-based alloys offer exceptional mechanical properties and corrosion resistance for various applications in extreme environments such as high neutron flux, temperature, and stress. Precipitates, resulting from thermal treatments, increase the strength and creep resistance of these alloys. Here, heavy ion irradiation is shown to destabilize the γ' and γ" precipitates in Inconel 718 nickel-based alloy by disordering and dissolution processes. Transmission electron microscopy and atom probe tomography reveal that the disordering and dissolution rates of the precipitates are proportional to both irradiation dose and dose rate. Irradiation induced disordering occurs at a higher rate than the dissolution. From analyzing the hardening contributions, microscale mechanical results suggest radiation-induced disordering is responsible for the majority of the softening response at low dose. In addition, low dose radiation-induced disordering results in strain localization and is believed to be the primary cause for the drastic degradation of uniform elongation and toughness in irradiated Inconel 718.

36 MATERIALS SCIENCE↗

Texture and precipitation behavior of friction stir welded Inconel 825 alloy

The microstructure, texture pattern, and precipitation behavior of friction stir butt welded Inconel 825 alloy are highlighted here. The microstructure of bright regions and black-banded regions in the stir zone (SZ) is characterized by SEM, EBSD, and TEM with EDS. EBSD analysis justifies that the SZ exhibits a dynamic recrystallized structure. Grain boundary mapping corroborates the insignificant difference in the low- and high-angle grain boundaries fraction between the SZ, the thermo-mechanically affected zone, and the base metal. TEM analysis confirms the formation of nano twins and dispersion of nano-size precipitations in the grains, and at the grain boundaries as well. Grain refinement and nano-size precipitation formation in the SZ significantly enhanced both microhardness and tensile strength.

Das, Hrishikesh↗

Mechanisms for stabilizing θ'(Al 2 Cu) precipitates at elevated temperatures investigated with phase field modeling

While most Al–Cu and Al–Si–Cu alloys strengthened by the metastable θ' phase exhibit extensive microstructural degradation above 200 °C, recent experimental work has demonstrated that θ' precipitates can be stabilized to 350 °C by microalloying additions of Mn and Zr, resulting in improved mechanical properties at elevated temperatures. Here, the present work utilizes phase field modeling to study the relationship between microalloying solute elements and the coarsening resistance of θ'. Simulations are designed to parse out the relative influence of various stabilization mechanisms on microstructural evolution of θ' precipitates at elevated temperatures. Specifically, a ternary alloying element is added to a virtual microstructure to study the operation and effectiveness of stabilization mechanisms including solute drag, diffusion barriers, interfacial energy reduction, and lattice strain modification. Simulation results are compared with atom probe tomography observations. Lastly, the simulations rationalize experimental observations of microstructural evolution and solute segregation in Al–Cu–Mn–Zr alloys, and reveal the interlinked thermodynamic and kinetic mechanisms that determine the elevated temperature stability of θ' precipitates.

36 MATERIALS SCIENCE↗

Improved lithium iodide neutron scintillator with Eu 2+ activation: The elimination of Suzuki-Phase precipitates

Monovalent alkali halides such as NaI, CsI, and LiI are widely used as inorganic scintillators for radiation detection due to their light yield, the capability for the growth of large single crystals, relatively low cost, and other favorable characteristics. These materials are frequently activated through the addition of small amounts (e.g., a few hundred ppm) of elements such as thallium - or sodium in the case of CsI. The monovalent alkali halide scintillators can also be activated with low concentrations of Eu 2+ , however Eu activation has previously not been widely employed due to the non-uniform segregation of the divalent Eu dopant that leads to the formation of unwanted phases during Bridgman or other solidification crystal-growth methods. Specifically, for Eu concentrations near and above ~0.5%, Suzuki Phase precipitates form in the course of the melt-growth process, and these Suzuki Phase particles scatter the scintillation light. This adversely affects the scintillator performance via reduction in the optical transmission of the material, and depending on the crystal thickness and precipitated-particle concentration, this reduction can occur up to the point of opacity. Here we describe a post-growth process for the removal of Suzuki Phase precipitates from single crystals of the neutron scintillator LiI activated with Eu 2+ at concentrations up to and in excess of 3 wt.%, and we correlate the resulting neutron-detection performance with the thermal processing methods used to remove the Suzuki Phase particles. Furthermore, the resulting improved scintillator properties using increased Eu activator levels are applicable to neutron imaging and active interrogation systems, and pulse-height gamma-ray spectroscopy rather than pulse-shape discrimination can be used to discriminate between gamma ray and neutron interaction events.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimizing green infrastructure placement under precipitation uncertainty

Increased urbanization, infrastructure degradation, and climate change threaten to overwhelm stormwater systems across the nation, rendering them ineffective. Green Infrastructure (GI) practices are low cost, low regret strategies that can contribute to urban runoff management. However, questions remain as to how to best distribute GI practices through urban watersheds given precipitation uncertainty and the variable hydrological responses to them. We develop stochastic programming models to determine the optimal placement of GI practices across a set of candidate locations in a watershed to minimize the total expected runoff under medium-term precipitation uncertainties. Specifically, we first develop a two-stage stochastic programming model. Next, we reformulate this model using perturbed parameters to reduce the requisite computational time and extend it to multi-stage. In addition, we introduce constraints that allow for incorporating sub-catchment-level runoff reduction considerations. Furthermore, we account for hydrological connectivity in the watershed using an underlying acyclic connectivity graph of sub-catchments and incorporate various practical considerations into the models. In addition, we develop a systemic approach to downscale the existing daily precipitation projections into hourly units and efficiently estimate the corresponding hydrological responses. These advancements are brought together in a case study for an urban watershed in a mid-sized city in the U.S., where we perform sensitivity analyses, evaluate the importance of the considered constraints, and provide insights.

54 ENVIRONMENTAL SCIENCES↗

Irradiation-enhanced α' precipitation in model FeCrAl alloys

We have irradiated the model FeCrAl alloys with varying compositions (Fe(10–18)Cr(10–6)Al at.%) with a neutron at ~ 320 to damage levels of ~ 7 displacements per atom (dpa) to investigate the compositional influence on the formation of irradiation-induced Cr-rich α' precipitates using atom probe tomography. In all alloys, significant number densities of these precipitates were observed. Cluster compositions were investigated and it was found that the average cluster Cr content ranged between 51.1 and 62.5 at.% dependent on initial compositions. Furthermore, this is significantly lower than the Cr-content of α' in binary FeCr alloys. As a result, significant partitioning of the Al from the α' precipitates was also observed.

36 MATERIALS SCIENCE↗

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes

Highlights: • A novel process for combining Li and cathode material recycling is developed. • Ni, Co and Mn are co-extracted and separated with Li. • Li recovered as Li{sub 2}CO{sub 3} with the purity of 99.2% is achieved. • The spherical cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is directly regenerated. - Abstract: A novel process for extracting transition metals, recovering lithium and regenerating cathode materials based on facile co-extraction and co-precipitation processes has been developed. 100% manganese, 99% cobalt and 85% nickel are co-extracted and separated from lithium by D2EHPA in kerosene. Then, Li is recovered from the raffinate as Li{sub 2}CO{sub 3} with the purity of 99.2% by precipitation method. Finally, organic load phase is stripped with 0.5 M H{sub 2}SO{sub 4}, and the cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is directly regenerated from stripping liquor without separating metal individually by co-precipitation method. The regenerative cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} is miro spherical morphology without any impurities, which can meet with LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} production standard of China and exhibits good electrochemical performance. Moreover, a waste battery management model is introduced to guarantee the material supply for spent battery recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated Quantitative Analysis of Extended Irradiation Defects - Dislocations, Voids and Precipitates in Neutron Irradiated HT-9 Steel

Structural alloys that make up the core components of nuclear reactors are exposed to radiation that can substantially alter the microstructure and mechanical properties of the material. Irradiation can cause the formation of extended defects including dislocation line and loops, voids and various types of precipitates. To understand the irradiation effects, it is critical to characterize these defects individually and collectively to quantify how they evolve throughout irradiation stages. Transmission electron microscopy (TEM) is a standard tool for providing extensive size, number density and spatial distribution of extended irradiation defects, however, manual measurement of defect size and number density requires time-intensive effort to analyze enough defects that provide a statistically meaningful result and are prone to errors of subjectivity. In this work, we developed a set of MATLAB algorithms offering robust and automated identification and quantification of extended irradiation defects like dislocation lines, voids and precipitates commonly observed in neutron irradiated cladding alloys [1]. Using a neutron-irradiated HT-9 martensitic alloy irradiated at 412°C to 111.8 dpa, we demonstrate the capability of these algorithms for quantitative defect analysis. Figure 1 presents defect images of the HT-9 using an advanced diffraction contrast imaging scanning transmission electron microscopy (DCI STEM) that suppresses bend contours and provides better defect contrast compared to conventional TEM [2]. The first step of defect analysis is defect identification, a process that can be digitally achieved by contrast thresholding (for simple defect contrast) and by machine learning computer vision for defect semantic segmentation [3]. Here, labeled binary defect images (Figures 2a and 2c) were used. For dislocation density quantification, we employed an optimized circular-grid intersection method first introduced by Dr. John Steeds [4]. This method is shown in Figures 2a and 2b, where the number of intersections of dislocation lines with circular traces was measured. This produces an unbiased sampling of dislocation lines, regardless of their orientation. This process was optimized with automated digital intersection number and grid length registration. Interestingly, it was found that a relatively large number of circles in a set circular gird is was needed to produce an invariant result (Figure 2b), with a low systematic measurement error. This demonstrates the main advantage of computer-based defect analysis, in performing repetitive operations quickly with a reduced systematic error. For the quantitative analysis of voids and precipitates a challenge encountered with automated defect analysis is feature overlap, particularly when the density of voids/precipitates is high. To mitigate this problem, as shown in Figure 2d, we modified the popular circular Hough transformation and treated ‘circular shape’ as the particle descriptor for voids/precipitates, efficiently resolving the overlapping particles. In summary, this automated digital quantification together with machine learning enabled defect identification [3] opens new opportunities for standardizing the characterization workflow for quantitative analysis of extended irradiation defects.

Sainju, Rajat↗

Real-Time Observation of Water-Soluble Mineral Precipitation in Aqueous Solution by In Situ High-Resolution Electron Microscopy

The precipitation and dissolution of water-soluble minerals in aqueous systems is a familiar process occurring commonly in nature. Understanding mineral nucleation and growth during its precipitation is highly desirable, but past in situ techniques have suffered from limited spatial and temporal resolution. In this paper, by using in situ graphene liquid cell electron microscopy, mineral nucleation and growth processes are demonstrated in high spatial and temporal resolution. We precipitate the mineral thenardite (Na 2 SO 4 ) from aqueous solution with electron-beam-induced radiolysis of water. We demonstrate that minerals nucleate with a two-dimensional island structure on the graphene surfaces. We further reveal that mineral grains grow by grain boundary migration and grain rotation. Finally, our findings provide a direct observation of the dynamics of crystal growth from ionic solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Impact of Precipitation Parameters on the Specific Surface Area of PuO 2

Controlling the properties of PuO 2 through processing is of vital importance to environmental transport and fate, production of nuclear fuels, nuclear forensic analyses, stockpile stewardship, and storage of nuclear wastes applications. A number of processing conditions have been identified to control final product properties, including specific surface area (SSA), residual carbon content, adsorption of volatile species, morphology, and particle size. In this paper, a novel approach is developed for the prediction of PuO 2 SSA via the synthetic route of Pu(IV) oxalate precipitation followed by calcination. The proposed model utilizes multivariate regression methodology and leave one out formalism to link Savannah River Site (SRS) precipitation and calcination production data to the SSA of the final product. A comparison among the models provides insight into the accuracy and ability to identify variations amongst the processing data. Additionally, the models may also be used to fit new data outside of the parameters explored in a production facility. Finally, the trained model was compared to a similarly trained conventional model form to illustrate the influence of precipitation parameters on the prediction of the final SSA. The models presented here attempt to provide new methods for more accurate prediction of the PuO 2 product properties in a production scale environment for key environmental and nuclear applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Modeling Precipitation and Sorption of Al, U and Co-contaminants during Titration of Acidic Sediments in Recirculation Flow-Through Experiments

We conducted batch and recirculating column titration tests with contaminated acidic sediments with controlled CO2 in the headspace, and extended the geochemical model by Gu et al. (2003, GCA) to better understand and quantify the reactions governing trace metal fate in the subsurface. The sediment titration curve showed slow pH increase due to strong buffering by Al precipitation and CO2 uptake. Assuming precipitation of basaluminite at low saturation index (SI=-4), and decreasing cation exchange selectivity coefficient (kNa\Al=0.3), the predictions are close to the observed pH and Al; and the model explains 1) the observed Ca, Mg, and Mn concentration decrease by cation exchange with sorbed Al, and 2) the decrease of U by surface complexation with Fe hydroxides at low pH, and precipitation as liebigite (Ca2UO2(CO3)3:10H2O) at pH>5.5. Without further adjustment geochemical parameters, the model describes reasonably well previous sediment and column titration tests without CO2 in the headspace, as well as the new large column test. The apparent inhibition of U and Ni decrease in the large column can be explained by formation of aqueous carbonate complexes and/or competition with carbonate for surface sites. These results indicated that ignoring labile solid phase Al would underestimate base requirement in titration of acidic aquifers.

Tang, Guoping↗

Why Does Amazon Precipitation Decrease When Tropical Forests Respond to Increasing CO 2 ?

Earth system models predict a zonal dipole of precipitation change over tropical South America, with decreases over the Amazon and increases over the Andes. Much of this has been attributed to the physiological response of the rainforest to elevated CO 2 , which describes a basin-wide reduction in stomatal conductance and transpiration. While robust in Earth system model experiments, details of the underlying atmospheric mechanism—specifically how it evolves in the context of land-atmosphere interaction and the diurnal cycle—are unresolved. We investigate this using idealized model simulations and find that within 24 hr of a CO 2 increase, changes occur over the Amazon that engender synoptic timescale feedbacks. Decreased evapotranspiration from the rainforest throttles near-surface moisture, inducing a drier, warmer, and deeper boundary layer. Above this, enhanced turbulent diffusivity increases vapor in the lower free troposphere. Together, these processes reduce convective activity and cause immediate decreases in Amazon rainfall. Over the synoptic timescale, these changes leave behind lower tropospheric moisture, which is advected westward by the background jet and increases Andean precipitation. This produces a dipole of precipitation change consistent across global and regional models as well as parameterized and resolved convection, though details are sensitive to model topography and boundary layer formulation. The mechanism reported here stresses the importance of fast timescale processes affecting stability over a period of hours that can influence longer-term vegetation-climate interactions. These results help clarify the Amazon's physiological response to rising CO 2 and provide insight into possible causes of historical model biases and end-of-century uncertainty in this region.

54 ENVIRONMENTAL SCIENCES↗

Understanding the Driver of Energetic Electron Precipitation Using Coordinated Multisatellite Measurements

Magnetospheric plasma waves play a significant role in ring current and radiation belt dynamics, leading to pitch angle scattering loss and/or stochastic acceleration of the particles. During a nonstormtime dropout event on 24 September 2013, intense electromagnetic ion cyclotron (EMIC) waves were detected by Van Allen Probe A (RBSP-A). We quantitatively analyze a conjunction event when RBSP-A was located approximately along the same magnetic field line as MetOp- 01, which detected simultaneous precipitation of >30 keV protons and energetic electrons over an unexpectedly broad energy range (>~30 keV). Multi-point observations together with quasilinear theory provide direct evidence that the observed electron precipitation at higher energy (>~700 keV) is primarily driven by EMIC waves. However, the newly observed feature of the simultaneous electron precipitation extending down to ~30 keV is not supported by existing theories and raises an interesting question on whether EMIC waves can scatter such low-energy electrons.

79 ASTRONOMY AND ASTROPHYSICS↗

The Microphysics of Stratiform Precipitation During OLYMPEX: Compatibility Between Triple‐Frequency Radar and Airborne In Situ Observations

Abstract The link between stratiform precipitation microphysics and multifrequency radar observables is thoroughly investigated by exploiting simultaneous airborne radar and in situ observations collected from two aircraft during the OLYMPEX/RADEX (Olympic Mountain Experiment/Radar Definition Experiment 2015) field campaign. Above the melting level, in situ images and triple‐frequency radar signatures both indicate the presence of moderately rimed aggregates. Various mass‐size relationships of ice particles and snow scattering databases are used to compute the radar reflectivity from the in situ particle size distribution. At Ku and Ka band, the best agreement with radar observations is found when using the self‐similar Rayleigh‐Gans approximation for moderately rimed aggregates. At W band, a direct comparison is challenging because of the non‐Rayleigh effects and of the probable attenuation due to ice aggregates and supercooled liquid water between the two aircraft. A variational method enables the retrieval of the full precipitation profile above and below the melting layer, by combining the observations from the three radars. Even with three radar frequencies, the retrieval of rain properties is challenging over land, where the integrated attenuation is not available. Otherwise, retrieved mean volume diameters and water contents of both solid and liquid precipitation are in agreement with in situ observations and indicate local changes of the degree of riming of ice aggregates, on the scale of 5 km. Finally, retrieval results are analyzed to explore the validity of using continuity constraints on the water mass flux and diameter within the melting layer in order to improve retrievals of ice properties.

47 OTHER INSTRUMENTATION↗

Larger increases in more extreme local precipitation events in as climate warms

Global climate models project that extreme precipitation events will increase in intensity during the 21st century at large spatial scales, with several studies suggesting that the most extreme events will exhibit the highest rate of intensification. The identification of the causes of this phenomenon nevertheless remains tenuous, in part because some studies have used methods that may not be appropriate for diagnosing long-term changes in intensity. Using a large ensemble of North American regional climate simulations, we confirm statistical evidence that intensification occurs more rapidly with warming for more extreme events of hourly-to-daily durations at finer regional scales. The larger increases in more extreme events are found to be primarily due to atmospheric circulation changes. Thermodynamically induced changes are found to have relatively uniform effects across extreme events and regions. In contrast, dynamical changes that are reflected in vertical velocity weaken moderate precipitation events over western interior regions of North America, and enhance them elsewhere. The weakening effect decreases and even reverses for more extreme precipitation events, whereas there is further intensification over other parts of North America, creating an “intense gets intenser” pattern over most of the continent.

Li, Chao↗

Parameterizing Subgrid Variations of Land Surface Heat Fluxes to the Atmosphere Improves Boreal Summer Land Precipitation Simulation With the NCAR CESM1.2

Subgrid horizontal variations of land surface heat fluxes to the atmosphere resulting from subgrid land cover heterogeneity are important in land-atmosphere interaction in global climate models (GCMs). To incorporate it, a parameterization using stochastic sampling based on truncated normal distributions diagnosed from the land model and internal ensemble mean of multiple calls to the planetary boundary layer and deep convection schemes is developed. After its implementation in the National Center for Atmospheric Research (NCAR) Community Earth System Model version 1.2 (CESM1.2), large changes of simulated land precipitation are found to occur in regions where large subgrid variations of surface heat fluxes exist. The simulated precipitation is improved in boreal summer, especially over eastern China and the coastal areas of the Bay of Bengal. The improved precipitation is mainly a result of improved large-scale moisture convergence and advection by altered vertical diffusion and convection.

58 GEOSCIENCES↗