A remark on Polonnikov's approach to generalized bode diagrams.
Polonnikov generalization of Bode amplitude approximation technique to phase approximate evaluation
APPROXIMATION METHOD↗
SEARCH · Engineering Papers
Results for “PHASE DIAGRAMS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fractionating and Purifying Softwood Kraft Lignin with Aqueous Renewable Solvents: Liquid–Liquid Equilibrium for the Lignin–Ethanol–Water System
Hot ethanol–water solutions can be used to simultaneously fractionate and purify softwood Kraft lignin through the Aqueous Lignin Purification with Hot Agents (ALPHA) process, using the regions of liquid–liquid equilibrium (LLE) that form at selected temperatures and solvent-to-lignin feed (S/F) ratios. Lignin, ethanol, and water compositions are measured for the solvent-rich (SR) and lignin-rich (LR) liquid phases in mutual equilibrium, as well as the lignin and metals mass distributions between the two phases. As depicted in quasi-ternary diagrams for clarity, both temperature and S/F ratio can be used to grow, merge, and even split the regions of LLE, giving significant control over both molecular weight (MW) and lignin purity. For example, a solvent comprising 45:55 EtOH/H 2 O at 75 °C and an S/F ratio of 6:1 enables recovery of an ultrapure (95 % of Na removed), higher MW (M n =8400 Da) lignin fraction in the LR phase. On the other hand, 95:5 EtOH/H 2 O at 45 °C and S/F=3:1 enables recovery of an ultrapure, low MW (1500 Da) lignin in the SR phase.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
T–x diagrams for the CO 2 –H 2 O system: The importance of water content in CO 2 transportation for carbon capture and storage
Abstract When water is present in a CO 2 pipeline, corrosion or plugging can occur due to the formation of liquid water or gas hydrate, respectively. Understanding how corrosion and hydrate plugging can be avoided is important for enhanced oil recovery and carbon dioxide capture and storage processes. If the CO 2 is sufficiently dried prior to transportation, the formation of these problematic free‐water phases can be avoided. In this work, isobaric T–x diagrams were developed from the P–T diagram for the CO 2 –H 2 O binary system. Pressures ranging from just below the lower quadruple point to above the lower critical end point were studied. These diagrams are meant to give the reader a better conceptual understanding of how the water composition in CO 2 –H 2 O mixtures will influence phases that form at different temperatures and pressures. The diagrams are analyzed from the perspective of flow assurance in CO 2 transportation.
Wadsworth, Lindsey A.↗
Compositional patterning in irradiated alloys: Effective potentials and effective interfacial energy
Compositional patterning (CP) in binary alloys during energetic particle irradiation is studied using a kinetic model that considers two competing kinetic processes, a thermally activated one promoting macroscopic phase separation (MPS) of the concentration field c(r,t) and a forced one resulting in finite-range random atomic mixing. The forced mixing is modeled by a Gaussian relocation distribution with a characteristic distance R. A series of approximate kinetic models are introduced by expanding the mixing function into a series of n terms, thus replacing the non-local evaluations of the concentration field c(r'-r,t) by local derivatives of c(r,t). This approach makes it possible to obtain exact effective potentials and build steady-state diagrams for each order-n model. Phase field (PF) simulations using these order-n models reveal that near the onset of patterning, phase evolution is accurately described using an order-3 model, which changes smoothly from an extended Cahn-Hilliard free energy in the MPS regime to a one-mode Swift-Hohenberg functional in the CP regime. Deeper into the patterning regime, higher-order models are required to achieve convergence, yielding square-like concentration profiles characteristic of a strong segregation regime. These higher-order effective free energies are analogous to multimodal Swift-Hohenberg functionals. Here, a new definition for the effective interfacial energy is proposed in the CP regime, since the interfacial area is no longer an excess quantity in that regime, precluding the use of the standard thermodynamic definition of interfacial energy.
36 MATERIALS SCIENCE↗
Asymmetrical booster ascent guidance and control system design study. Volume 5: Space shuttle powered explicit guidance
An optimum powered explicit guidance algorithm capable of handling all space shuttle exoatospheric maneuvers is presented. The theoretical and practical basis for the currently baselined space shuttle powered flight guidance equations and logic is documented. Detailed flow diagrams for implementing the steering computations for all shuttle phases, including powered return to launch site (RTLS) abort, are also presented. Derivation of the powered RTLS algorithm is provided, as well as detailed flow diagrams for implementing the option. The flow diagrams and equations are compatible with the current powered flight documentation.
Jaggers, R. F.↗
Vertical Variations of Cloud Microphysical Relationships in Marine Stratocumulus Clouds Observed During the ACE‐ENA Campaign
Abstract This study examines the vertical variations of cloud microphysical relationships and their implications to cloud microphysical processes in marine stratocumulus clouds using in‐situ aircraft observations during the Aerosol and Cloud Experiments in Eastern North Atlantic (ACE‐ENA) field campaign. A new diagram with a coordinate system based on cloud droplet liquid water content (L c ) and phase relaxation time scale is proposed to investigate mixing mechanisms. This new diagram analysis shows that the inhomogeneous mixing trait is dominant near the cloud top, but homogeneous mixing trait is stronger at lower altitudes. The relevant scale parameters (i.e., transition length scale and transition scale number) also indicate a high likelihood of inhomogeneous mixing. The relationship between L c and standard deviation of droplet radius (σ R ) clearly shows the vertical transition: the correlation between L c and σ R is positive at lower cloud altitudes, but it becomes negative as altitude increases. Such a vertical transition is consistent with the vertical circulation mixing, modulating the cloud microphysical relationships to suggest homogeneous mixing at a significant depth from the cloud top.
54 ENVIRONMENTAL SCIENCES↗
Stability and Mobility of Disconnections in Solute Atmospheres: Insights from Interfacial Defect Diagrams
This Letter explores the stability of disconnections (step-dislocation defects) at grain boundaries in binary alloys. We introduce interfacial defect diagrams, derived from atomistic simulations and segregation theory, to predict the stability of disconnections in the temperature-solute concentration phase space and relate it to governing segregation mechanisms. These diagrams reveal multiple stability regimes influenced by solute-induced clustering and pinning effects impacting the thermal migration of disconnections and offering insights into their thermodynamics and kinetic properties.
Crystal structure↗
How to design a focusing guide: The large moderator case1
As continuously shaped super-mirrors are becoming available, the conceptual design of focusing guides should explore a wider range of possibilities to accomplish an efficient neutron beam extraction. Starting from a desired phase-space volume at the sample position and using an upstream ray-tracing approach, the acceptance diagram of any focusing guide can be calculated at the moderator position. To ensure high brilliance transfer and homogeneous coverage, the acceptance diagram should be fully included in the neutron source emission phase-space volume. Following this idea, the guide system can be scaled into dimensionless geometric figures that convey performance limits for a desired cross-section reduction. Moreover, if we impose a monotonic increase of the reflection angle with divergence angle at the sample position, the shape of the mirror is analytically determined. This approach was applied in the design of a focusing guide for SNAP instrument at SNS, at ORNL, USA. The results of McStas simulations are presented with different options included. Our approach facilitates finding an optimal solution for connecting multiple guide pieces to avoid excessive losses and ensure a homogeneous phase space coverage.
Frost, Matthew↗
Digital decoder for phase-delay coded data
Coded or modulated digital data converts to nonreturn to zero /NRZ/ data. Technique includes logic implementation and pertinent timing diagrams. Demodulation to NRZ facilitates digital logic operations on incoming data. Phase-delay modulation has advantage of inherent self-timing not present in NRZ modulation.
Lewin, J.↗
Quantum oscillations with angular dependence in PdTe 2 single crystals
The layered transition-metal dichalcogenide PdTe 2 has been discovered to possess bulk Dirac points as well as topological surface states. By measuring the magnetization (up to 7 T) and magnetic torque (up to 35 T) in single crystalline PdTe2, we observe distinct de Haas–van Alphen (dHvA) oscillations. Eight frequencies are identified with H||c, with two low frequencies (F α = 8 T and F β = 117 T) dominating the spectrum. The effective masses obtained by fitting the Lifshitz–Kosevich (LK) equation to the data are $m_α^* =0.059m_0$ and $m_β^* =0.067m_0$ where $m_0$ is the free electron mass. The corresponding Landau fan diagrams allow the determination of the Berry phase for these oscillations resulting in values of ~0.67π for the 3D α band (hole-type) (down to the 1st Landau level) and ~0.23π–0.73π for the 3D β band (electron-type) (down to the 3rd Landau level). By investigating the angular dependence of the dHvA oscillations, we find that the frequencies and the corresponding Berry phase (Φ B ) vary with the field direction, with a Φ B ~ 0 when H is 10°–30° away from the ab plane for both α and β bands. Finally, the multiple band nature of PdTe 2 is further confirmed from Hall effect measurements.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Microwave power transmitting phased array antenna research project
An initial design study and the development results of an S band RF power transmitting phased array antenna experiment system are presented. The array was to be designed, constructed and instrumented to permit wireless power transmission technology evaluation measurements. The planned measurements were to provide data relative to the achievable performance in the state of the art of flexible surface, retrodirective arrays, as a step in technically evaluating the satellite power system concept for importing to earth, via microwave beams, the nearly continuous solar power available in geosynchronous orbit. Details of the microwave power transmitting phased array design, instrumentation approaches, system block diagrams, and measured component and breadboard characteristics achieved are presented.
Dickinson, R. M.↗
Efficiently predicting pressure-composition-temperature diagrams to discover low-stability metal hydrides
Quantitatively accurate computational predictions of metal hydride thermodynamics are challenging but critical for alloy performance optimization across a multitude of technological domains, including hydrogen storage, compression, purification, and getters. Recent machine learning approaches have demonstrated great success in this area, but can potentially suffer from several shortcomings since they rely on imbalanced experimental training data and can have poor out-of-distribution (ood) test performance. Here, in this study, we circumvent such pitfalls by developing a computationally efficient, first principles-based workflow for direct prediction of metal hydride phase equilibrium, i.e., the pressure-composition-temperature (PCT) diagram. We then demonstrate its utility on predicting low stability hydrides derived from compositionally complex C14 Laves phase AB2 alloys. Specifically, we computationally predict and then experimentally validate an AB 2 alloy series (z < 0.6 for Ti 2−z Zr z CrMnFeNi) with ideal hydriding thermodynamics for a two-stage metal hydride-based compressor for pressurizing boil off from liquefied hydrogen. Importantly, this study lays the groundwork for accurate and efficient discovery/optimization of ood, low-stability hydrides for which purely data-driven approaches lack sufficient accuracy.
08 HYDROGEN↗
Relationship between directions of wave and energy propagation for cold plasma waves
The dispersion relation for plasma waves is considered in the 'cold' plasma approximation. General formulas for the dependence of the phase and group velocities on the direction of wave propagation with respect to the local magnetic field are obtained for a cold magnetized plasma. The principal cold plasma resonances and cut-off frequencies are defined for an arbitrary angle and are used to establish basic regimes of frequency where the cold plasma waves can propagate or can be evanescent. The relationship between direction of wave and energy propagation, for cold plasma waves in hydrogen atmosphere, is presented in the form of angle diagrams (angle between group velocity and magnetic field versus angle between phase velocity and magnetic field) and polar diagrams (also referred to as 'Friedrich's diagrams') for different directions of wave propagation. Morphological features of the diagrams as well as some critical angles of propagation are discussed.
Musielak, Zdzislaw E.↗
Phases of 2D massless QCD with qubit regularization
We investigate the possibility of reproducing the continuum physics of 2D S U ( N ) gauge theory coupled to a single flavor of massless Dirac fermion using qubit regularization. The continuum theory is described by N free fermions in the ultraviolet (UV) and a coset Wess-Zumino-Witten (WZW) model in the infrared (IR). In this work, we first explore how well these features can be reproduced using the Kogut-Susskind (KS) Hamiltonian with a finite-dimensional link Hilbert space and a generalized Hubbard coupling. We do this by analyzing the renormalization group (RG) flow diagram of the continuum theory and identifying important phases of the theory. Using strong coupling expansions, we show that our lattice model exhibits a gapped dimer phase and a spin-chain phase. Furthermore, for N = 2 , using tensor network methods, we show that there is a second-order phase transition between these two phases, which we identify as the critical surface of the continuum theory that connects the IR and UV fixed points. In the IR, we identify the critical theory at the transition as the expected S U ( 2 ) 1 WZW model. Lastly, we argue that modifications of our model may allow the study of the UV physics of free fermions. Published by the American Physical Society 2025
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Digital Receiver Phase Meter
The software of a commercially available digital radio receiver has been modified to make the receiver function as a two-channel low-noise phase meter. This phase meter is a prototype in the continuing development of a phase meter for a system in which radiofrequency (RF) signals in the two channels would be outputs of a spaceborne heterodyne laser interferometer for detecting gravitational waves. The frequencies of the signals could include a common Doppler-shift component of as much as 15 MHz. The phase meter is required to measure the relative phases of the signals in the two channels at a sampling rate of 10 Hz at a root power spectral density <5 microcycle/(Hz)1/2 and to be capable of determining the power spectral density of the phase difference over the frequency range from 1 mHz to 1 Hz. Such a phase meter could also be used on Earth to perform similar measurements in laser metrology of moving bodies. To illustrate part of the principle of operation of the phase meter, the figure includes a simplified block diagram of a basic singlechannel digital receiver. The input RF signal is first fed to the input terminal of an analog-to-digital converter (ADC). To prevent aliasing errors in the ADC, the sampling rate must be at least twice the input signal frequency. The sampling rate of the ADC is governed by a sampling clock, which also drives a digital local oscillator (DLO), which is a direct digital frequency synthesizer. The DLO produces samples of sine and cosine signals at a programmed tuning frequency. The sine and cosine samples are mixed with (that is, multiplied by) the samples from the ADC, then low-pass filtered to obtain in-phase (I) and quadrature (Q) signal components. A digital signal processor (DSP) computes the ratio between the Q and I components, computes the phase of the RF signal (relative to that of the DLO signal) as the arctangent of this ratio, and then averages successive such phase values over a time interval specified by the user.
Marcin, Martin↗
Phase noise measurements of the 400-kW, 2.115-GHz (S-band) transmitter
The measurement theory is described and a test method to perform phase noise verification using off-the-shelf components and instruments is presented. The measurement technique described consists of a double-balanced mixer used as phase detector, followed by a low noise amplifier. An FFT spectrum analyzer is then used to view the modulation components. A simple calibration procedure is outlined that ensures accurate measurements. A block diagram of the configuration is presented as well as actual phase noise data from the 400 kW, 2.115 GHz (S-band) klystron transmitter.
Boss, P.↗
Construction and testing of a Scanning Laser Radar (SLR), phase 2
The scanning laser radar overall system is described. Block diagrams and photographs of the hardware are included with the system description. Detailed descriptions of all the subsystems that make up the scanning laser radar system are included. Block diagrams, photographs, and detailed optical and electronic schematics are used to help describe such subsystem hardware as the laser, beam steerer, receiver optics and detector, control and processing electronics, visual data displays, and the equipment used on the target. Tests were performed on the scanning laser radar to determine its acquisition and tracking performance and to determine its range and angle accuracies while tracking a moving target. The tests and test results are described.
Flom, T.↗
Assessing the Sensitivity of Pourbaix Diagrams to Computational Protocols: Electrochemical Stability of Ni Oxides as a Case Study
Pourbaix diagrams stand as a useful tool in assessing and visualizing materials’ electrochemical stability and are widely used for electrocatalyst design. However, their reliability hinges on the accuracy of the chemical potentials of involved phases, which may bear uncertainties and can be significantly impacted by decision-making steps in the computational protocol. Here, this study introduces a robust sensitivity analysis framework, exemplified through a detailed examination of the computational Pourbaix diagram of Ni, the oxides of which are used as high-activity and cost-friendly catalysts for many electrochemical reactions. Quantities of interest derived from the Pourbaix diagram include the appearance and stability domain of the catalytically active Ni oxide phases along with the onset electrochemical potentials of phase transitions. These metrics can guide the design of operational conditions for Ni oxide electrocatalysts. We find that the employed DFT exchange-correlation functional has the most significant influence on the computed Pourbaix diagram. Uncertainties on crystal structures, along with their related ab initio energetics, are also found to affect the size of the phase stability domain. Higher-order coupling among input parameters is found to play a crucial role in influencing the appearance and distribution of Ni phases in the diagram. Our findings suggest a need to consider variations and uncertainties associated with the computational procedures on predicted Pourbaix diagrams for materials design.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗