Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical Imaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Interactions between Surface Chemistry and Gas-Phase Combustion: New Optical Tools for Probing Flame-Wall Interactions and the Heterogeneous Chemistry of Soot Growth and Oxidation in Flame. Final report

Some of the most stubborn and technologically critical problems in combustion are dominated by heterogeneous processes. While purely gas-phase combustion systems have been the subject of intense theoretical and experimental study, combustion phenomena occurring at interfaces are far less understood. This is partly caused by the lack of experimental approaches capable of probing locations very close to an interface, especially in the hostile environment of combustion. For laser-based optical techniques, measurements taken near interfaces are often complicated by laser scattering from the surface interfering with relatively weak signals. Further, for measurements intended to probe molecular species adsorbed at the interface between a gas-phase combustion reaction and a condensed phase material, signals are generally overwhelmed by contributions from the bulk phases, causing the small contribution from the interfacial molecular species to be undetectable. Our goal in this project has been to develop new optical tools for imaging chemical species, temperature, and surface species at and near surfaces or interfaces of relevance to combustion. We have placed focus on the development and refinement of ultrafast techniques such as femtosecond coherent Raman imaging and femtosecond/picosecond sum-frequency generation (SFG) scattering, as well as the models used to simulate such spectra under differing conditions of pressure and chemical speciation. The two physical phenomena initially targeted for study in this project were flamewall interactions, and the growth of particulates in flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Analysis of Experimental Shock Propagation through a Diverse Set of Geometric Cavities Embedded in Lab-Scale Polymer Cubes

Experiments were designed and conducted to investigate the impact that geometric cavities have on the transfer of energy from an embedded explosion to the surface of the physical domain. The experimental domains were fabricated as 3-inch polymer cubes, with varying cavity geometries centered in the cubes. The energy transfer, represented as a shock wave, was generated by the detonation of an exploding bridgewire at the center of the cavity. The shock propagation was tracked by schlieren imaging through the optically accessible polymer. The magnitude of energy transferred to the surface was recorded by an array of pressure sensors. A minimum of five experimental runs were conducted for each cavity geometry and statistical results were developed and compared. Results demonstrated the decoupling effect that geometric cavities produce on the energy field at the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2023

GTC Follow-up Observations of Very Metal-poor Star Candidates from DESI

Abstract The observations from the Dark Energy Spectroscopic Instrument (DESI) will significantly increase the numbers of known extremely metal-poor stars by a factor of ∼10, improving the sample statistics to study the early chemical evolution of the Milky Way and the nature of the first stars. In this paper we report follow-up observations with high signal-to-noise ratio of nine metal-poor stars identified during the DESI commissioning with the Optical System for Imaging and Low-Resolution Integrated Spectroscopy (OSIRIS) instrument on the 10.4 m Gran Telescopio Canarias. The analysis of the data using a well-vetted methodology confirms the quality of the DESI spectra and the performance of the pipelines developed for the data reduction and analysis of DESI data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Preliminary Target Selection for the DESI Quasar (QSO) Sample

The DESI survey will measure large-scale structure using quasars as direct tracers of dark matter in the redshift range 0.9 < z < 2.1 and using quasar Lyα forests at z > 2.1. In this work, we present two methods to select candidate quasars for DESI based on imaging in three optical (g, r, z) and two infrared (W1, W2) bands. The first method uses traditional color cuts and the second utilizes a machine-learning algorithm.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1970

Image resolution: Its significance in a wildland area

The information content of simulated space photos as a function of various levels of image resolution was determined by identifying major vegetation-terrain types in a series of images purposely degraded optically to different levels of ground resolution resolvable distance. Comparison of cumulative interpretation results with actual ground truth data indicates that although there is definite decrease in interpretability as ground resolvable distance increases, some valuable information is gained by using even the poorest aerial photography. Developed is the importance of shape and texture for correct identification of broadleaf or coniferous vegetation types and the relative unimportance of shape and texture for the recognition of grassland, water bodies, and nonvegetated areas. Imagery must have a ground resolvable distance of at least 50 feet to correctly discriminate between primary types of woody vegetation.

Lauer, D. T.↗
NASA NTRS1972

Bonanza project, 1971

Research on the application of remote sensing techniques to the mineral industry stresses photointerpretation by human interpreter experienced in the extraction of geological information from aerial color and multiband photographs and from thermal scanner imagery. Also considered are optical and digital image enhancement, multiband color additive projection, video image processing, and computer reduction and analysis of infrared spectrometry. Evaluation of those parameters which have the most contrast between adjacent rock formations and which can be remotely sensed establish the following most useful geological characteristics: Topographic landform, color, albedo, and surface temperature.

Lee, K.↗
NASA NTRS1973

Ocean water color assessment from ERTS-1 RBV and MSS imagery

The author has identified the following significant results. Photo-optical and electronic density slicing were applied to ERTS-1 E 1007-151651-4, 30 July 1972, an area in the Caribbean showing deep ocean water, and shallow areas on the Great Baham Bank ranging from 0.5 meter or less to 18 meters. The density slicing processes were adjusted to correlate water radiance to bathmetric contours shown on C and GS Chart 1112. A number of large areas corresponding to water depths of 2 meters or less, 5 to 10 meters, and 10 to about 20 meters were isolated by both processes. Where clear water and uniformly reflective bottom was found, clear of marine growths, the photo-optical and electronic image density slicing processes proved effective in delineating areas where the depth was in the order of 5 meters, plus or minus 1 meter.

Ross, D. S.↗
NASA NTRS1974

Solidification of NaCl-NaF eutectic in space

Continuous and discontinuous NaF fibers, embedded in a NaCl matrix, have been produced in space and on earth, respectively. The production of continuous fibers in a eutectic mixture was attributed to the absence of convection current in the liquid during solidification in space. Image transmission and optical transmittance measurements of transverse sections of the space-grown and earth-grown ingots were made with a light microscope and a spectrometer. It was found that better optical properties were obtained from samples grown in space. This was attributed to a better alignment of NaF fibers along the ingot axis.

Yue, A. S.↗
NASA NTRS1976

Zero-gravity growth of NaF-NaCl eutectics in the NASA Skylab program

Continuous and discontinuous NaF fibers, embedded in a NaCl matrix, were produced in space and on earth. The production of continuous fibers in a eutectic mixture is attributed to the absence of convection current in the liquid during solidification in space. Image transmission and optical transmittance measurements of transverse sections of the space-grown and earth-grown ingots were made with a light microscope and a spectrometer. It is shown that better optical properties were obtained from samples grown in space. This was attributed to a better alignment of NaF fibers along the ingot axis. A new concept is advanced to explain the phenomenon of transmittance versus far infrared wavelength of the directionally solidified NaCl-NaF eutectic in terms of the two-dimensional Bragg Scattering and the polarization effect of Rayleigh scattering. This concept can be applied to other eutectic systems as long as the index of refraction of the matrix over a range of wavelengths is known. Experimental data are in agreement with the theoretical prediction.

Yue, A. S.↗
NASA NTRS1977

Zero-gravity growth of NaCl-LiF eutectic. Experiment MA-131

Continuous and discontinuous lithium fluoride fibers embedded in a sodium chloride matrix were produced in space and on earth, respectively. The production of continuous fibers in an eutectic mixture was attributed to the absence of convection current in the liquid during solidification in space. Image transmission and optical transmittance measurements of transverse sections of the space-grown and earth-grown ingots were made with a light microscope and a spectrometer. It was found that better optical properties were obtained from samples grown in space. This was attributed to a better alignment of lithium fluoride fibers along the growth direction.

Yue, A. S.↗
NASA NTRS1977

Properties of aerosols in the Martian atmosphere, as inferred from Viking Lander imaging data

Three types of aerosol were detected from observations of the Martian sky, Phobos, and the sun with the Viking imaging cameras. Atmospheric optical depths were derived from observations of the objects' brightness. Data on the absorption coefficient, mean size, and shape of aerosols were obtained from studies of the sky brightness, using a multiple-scattering computer code. The aerosol types were water ice ground fog, a higher-level ice cloud (polar hood), and soil particles suspended at heights up to 30 km. The properties of each type of aerosol are discussed. The data are subjected to thorough analysis, and the results are summarized.

Pollack, J. B.↗
NASA NTRS1977

Coherent optical processing of synthetic aperture radar data

Consideration is given to the data processing algorithm used in synthetic aperture radar (SAR) systems. Examples are presented of radar imagery obtained with the ERIM X-band SAR system and processed with a precision optical processor. An optical recording of the data is the input to the coherent optical processing channel. The encoding technique, spatial format, and quality of the stored data are discussed. Several optical processor configurations are outlined, noting particularly the tilted-plane system. A scanning photodetector serves to convert the optical processor output image data into an electronic signal stream. Solid-state two-dimensional photodetector arrays may provide this function at increased speeds and with greater accuracy.

Cindrich, I.↗
NASA NTRS1980

Remote sensing program activity report

Major accomplishments in an effort to encourage investigation and technology transfer for practical applications of remote sensing to solve Earth resources problems in Vermont include: (1) acquisition, installation, and operation of the ORSER digital processing system on the University's IBM 3031 computer; (2) acquisition and operation of printing and CRT computer terminals for remote access to computer facilities for analysis of remotely sensed digital tape; (3) acquisition and operation of optical interpretation and image transfer devices for use with all types of aerial photography; (4) development of audio visual and other training materials for use in presentations, workshops, and short courses to enhance technology transfer; and (5) cooperation government agencies in demonstration projects to show the feasibility of using remote sensing technology.

Whitmore, R. A., Jr.↗
NASA NTRS1980

SEASAT-SAR data analysis in the US: An update

A graph is shown which compares SEASAT synthetic aperture radar (SAR) wave length measurements and Krasman's shallow water dispersion relationship for a swell system of deep water length 210 m and period 11.7 sec. The data were taken during the Duck experiment. The status of the production of optically correlated SAR data is given along with a tabulation of both digitally and optically processed SAR image data available to the user community as of Aug. 1979. Results from several SAR workshops are mentioned.

Dunne, J. A.↗
NASA NTRS1981

Landsat classification of coastal wetlands in Texas

Through a multiagency study of Landsat imagery applications, an analysis of Texas coastal wetlands shows that five Level III categories of wetlands can be delineated using image interpretation: topographically low marshes, topographically high marshes, tidal flats, sea grass and algal flats, and vegetated dredged material. Image interpretation involves optical enlargement of 1:1,000,000 scale, Landsat transparencies to a scale of 1:125,000 and mapping on a stable film base. Digital classification procedures, resulting in 1:24,000 scale line printer maps as output, require several iterations to display welands effectively. Accuracies of 65% were achieved for all wetland categories combined.

Finley, R. J.↗