Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPTICAL REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Nonstationary Problem of Complex Heat Transfer in a System of Semitransparent Bodies with Boundary-Value Conditions of Diffuse Reflection and Refraction of Radiation

We consider a nonstationary initial boundary-value problem describing complex (radiative-conductive) heat transfer in a system of semitransparent bodies. To describe radiation propagation, we use the radiation transfer equation with boundary-value conditions of diffuse reflection and refraction of radiation. We take into account that the radiation intensity and optical properties of bodies depend on the radiation frequency. The unique solvability of a weak solution is established. The comparison theorem is proved. A priori estimates of a weak solution as well as its regularity are obtained.

97 MATHEMATICS AND COMPUTING↗

Theoretical modeling of the dynamics of a semiconductor laser subject to double-reflector optical feedback

We theoretically model the dynamics of semiconductor lasers subject to the double-reflector feedback. The proposed model is a new modification of the time-delay rate equations of semiconductor lasers under the optical feedback to account for this type of the double-reflector feedback. We examine the influence of adding the second reflector to dynamical states induced by the single-reflector feedback: periodic oscillations, period doubling, and chaos. Regimes of both short and long external cavities are considered. The present analyses are done using the bifurcation diagram, temporal trajectory, phase portrait, and fast Fourier transform of the laser intensity. We show that adding the second reflector attracts the periodic and perioddoubling oscillations, and chaos induced by the first reflector to a route-to-continuous-wave operation. During this operation, the periodic-oscillation frequency increases with strengthening the optical feedback. We show that the chaos induced by the double-reflector feedback is more irregular than that induced by the single-reflector feedback. The power spectrum of this chaos state does not reflect information on the geometry of the optical system, which then has potential for use in chaotic (secure) optical data encryption.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wavelength-independent anti-interference coating for the far-infrared

The transmission and reflection of radiation at an interface between two dielectrics with a thin conducting film is analyzed under conditions appropriate to the far-infrared. When the transmission is from a more dense to a less dense optical medium it is demonstrated that the reflectivity can be made arbitrarily small for a wide range of wavelengths by selecting the appropriate sheet resistance for the conducting film. This property can be exploited to produce a coating that drastically reduces the interference fringes in a flat plane-parallel dielectric substrate or window. The condition depends only on the film resistance which can be monitored precisely during deposition. This effect is demonstrated by evaporating films of nichrome on silicon substrates, which reduce the interference fringe contrast to less than 1 percent transmittance from 10-100/cm. Near the antiinterference condition the fringe contrast is shown to be a sensitive probe of the film conductivity.

Mcknight, S. W.↗

Feasibility study of the use of synchrotron radiation in the calibration of AXAF - Initial reflectivity results

The 1-percent calibration accuracy goal of the Advanced X-ray Astrophysics Facility is being approached by way of an experiment at the National Synchrotron Light Source that will demonstrate the accuracy achievable in reflectance measurements conducted on coated flat mirrors in the 50 eV-12 keV energy range. The coatings will be of commercially produced Au, Ni, and Ir, deposited either by sputtering or by e-beam deposition. Optical constants will be estimated via the reflectance vs. angle-of-incidence method.

Graessle, D. E.↗

A novel zirconium K{alpha} imager for high energy density physics research

We report on the development and characterization of a zirconium K{alpha} imager for high energy density physics research. The imager consists of a spherically bent quartz crystal operating at 15.7 keV photon energy. We compare the performance of the imager in terms of integrated reflectivity (R{sub int}) and temperature dependent collection efficiency ({eta}{sub Te}) to that of the widely used Cu K{alpha} imager. Our collisional-radiative simulations show that the new imager can be reliably used up to 250 eV plasma temperature. Monte Carlo simulations show that for a 25 {mu}m thick tracer layer of zirconium, the contribution to K{alpha} production from photo-pumping is only 2%. We present, for the first time, 2D spatially resolved images of zirconium plasmas generated by a high intensity short pulse laser interacting with Zr solid targets.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiplex and simultaneous measurement of displacement and temperature using tapered fiber and fiber Bragg grating

A simple method to work out the multiplexing of tapered fiber based sensors is proposed and demonstrated. By cascading a tapered fiber with a fiber Bragg grating (FBG), the sensor head is provided with a wavelength identification, different FBGs provide the sensor heads with different reflective peaks and they can be distinguished in optical spectrum. By compositing several such sensor heads with a multi-channel beam splitter, a star-style topological structure sensor for multipoint sensing is achieved. At the same time, the output intensity at the peak wavelength is sensitive to one external physical parameter applied on the related FBG-cascaded tapered fiber and the central wavelength of the peak is only sensitive to temperature, so that that parameter and temperature can be measured simultaneously. A sensor for dual-point measurement of the displacement and temperature simultaneously is experimentally demonstrated by using a 2 x 2 coupler in this paper. Experiment results show that the sensor works well and the largest sensitivities reach to 0.11 dB/{mu}m for displacement in the range of 0-400 {mu}m, and {approx}0.0097 nm/ deg. C for temperature between 20 deg. C and 70 deg. C.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diffraction-Based Optical Switching with MEMS

In this article, we are presenting an overview of MEMS-based (Micro-Electro-Mechanical System) optical switch technology starting from the reflective two-dimensional (2D) and three-dimensional (3D) MEMS implementations. To further increase the speed of the MEMS from these devices, the mirror size needs to be reduced. Small mirror size prevents efficient reflection but favors a diffraction-based approach. Two implementations have been demonstrated, one using the Texas Instruments DLP (Digital Light Processing), and the other an LCoS-based (Liquid Crystal on Silicon) SLM (Spatial Light Modulator). These switches demonstrated the benefit of diffraction, by independently achieving high speed, efficiency, and high number of ports. We also demonstrated for the first time that PSK (Phase Shift Keying) modulation format can be used with diffraction-based devices. To be truly effective in diffraction mode, the MEMS pixels should modulate the phase of the incident light. We are presenting our past and current efforts to manufacture a new type of MEMS where the pixels are moving in the vertical direction. The original structure is a 32 x 32 phase modulator array with high contrast grating pixels, and we are introducing a new sub-wavelength linear array capable of a 310 kHz modulation rate

36 MATERIALS SCIENCE↗

Reflector Technology Development and System Design for Concentrating Solar Power Technologies

Alcoa began this program in March of 2008 with the goal of developing and validating an advanced CSP trough design to lower the levelized cost of energy (LCOE) as compared to existing glass based, space-frame trough technology. In addition to showing a pathway to a significant LCOE reduction, Alcoa also desired to create US jobs to support the emerging CSP industry. Alcoa's objective during Phase I: Concept Feasibility was to provide the DOE with a design approach that demonstrates significant overall system cost savings without sacrificing performance. Phase I consisted of two major tasks; reflector surface development and system concept development. Two specific reflective surface technologies were investigated, silver metallized lamination, and thin film deposition both applied on an aluminum substrate. Alcoa prepared samples; performed test validation internally; and provided samples to the NREL for full-spectrum reflectivity measurements. The final objective was to report reflectivity at t = 0 and the latest durability results as of the completion of Phase 1. The target criteria for reflectance and durability were as follows: (1) initial (t = 0), hemispherical reflectance >93%, (2) initial spectral reflectance >90% for 25-mrad reading and >87% for 7-mrad reading, and (3) predicted 20 year durability of less than 5% optical performance drop. While the results of the reflective development activities were promising, Alcoa was unable to down-select on a reflective technology that met the target criteria. Given the progress and potential of both silver film and thin film technologies, Alcoa continued reflector surface development activities in Phase II. The Phase I concept development activities began with acquiring baseline CSP system information from both CSP Services and the DOE. This information was used as the basis to develop conceptual designs through ideation sessions. The concepts were evaluated based on estimated cost and high-level structural performance. The target criteria for the concept development was to achieve a solar field cost savings of 25%-50% thereby meeting or exceeding the DOE solar field cost savings target of $\$$350/m 2 . After evaluating various structural design approaches, Alcoa down-selected to a monocoque, dubbed Wing Box, design that utilizes the reflective surface as a structural, load carrying member. The cost and performance potential of the Wing Box concept was developed via initial finite element analysis (FEA) and cost modeling. The structural members were sized through material utilization modeling when subjected to representative loading conditions including wind loading. Cost modeling was utilized to refine potential manufacturing techniques that could be employed to manufacture the structural members. Alcoa concluded that an aluminum intensive collector design can achieve significant cost savings without sacrificing performance. Based on the cost saving potential of this Concept Feasibility study, Alcoa recommended further validation of this CSP approach through the execution of Phase II: Design and Prototype Development. Alcoa Phase II objective was to provide the DOE with a validated CSP trough design that demonstrates significant overall system cost savings without sacrificing performance. Phase II consisted of three major tasks; Detail System Design, Prototype Build, and System Validation. Additionally, the reflector surface development that began in Phase I was continued in Phase II. After further development work, Alcoa was unable to develop a reflective technology that demonstrated significant performance or cost benefits compared to commercially available CSP reflective products. After considering other commercially available reflective surfaces, Alcoa selected Alano's MIRO-SUN product for use on the full scale prototype. Although MIRO-SUN has a lower specular reflectivity compared to other options, its durability in terms of handling, cleaning, and long-term reflectivity was deemed the most important attribute to successfully validate Alcoa's advanced trough architecture. To validate the performance of the Wing Box trough, a 6 meter aperture by 14 meter long prototype trough was built. For ease of shipping to and assembly at NREL's test facility, the prototype was fabricated in two half modules and joined along the centerline to create the Wing Box trough. The trough components were designed to achieve high precision of the reflective surface while leveraging high volume manufacturing and assembly techniques.

14 SOLAR ENERGY↗

Hard X-Ray Emission of X-Ray Bursters

The primary goal of this proposal was to perform an accurate measurement of the broadband x-ray spectrum of a neutron-star low-mass x-ray binary found in a hard x-ray state. This goal was accomplished using data obtained under another proposal, which has provided exciting new information on the hard x-ray emission of neutron-star low-mass x-ray binaries. In "BeppoSAX Observations of the Atoll X-Ray Binary 4U0614+091", we present our analysis of the spectrum of 4U0614+091 over the energy band from 0.3-150 keV. Our data confirm the presence of a hard x-ray tail that can be modeled as thermal Comptonization of low-energy photons on electrons having a very high temperature, greater than 220 keV, or as a non-thermal powerlaw. Such a very hard x-ray spectrum has not been previously seen from neutron-star low-mass x-ray binaries. We also detected a spectral feature that can be interpreted as reprocessing, via Compton reflection, of the direct emission by an optically-thick disk and found a correlation between the photon index of the power-law tail and the fraction of radiation reflected which is similar to the correlation found for black hole candidate x-ray binaries and Seyfert galaxies. A secondary goal was to measure the timing properties of the x-ray emission from neutronstar low-mass x-ray binaries in their low/hard states.

Kaaret, P.↗

Passivating boron silicate glasses for co-diffused high-efficiency n-type silicon solar cell application

Doping layers commonly have but one function: supplying the dopants to form a doped region within a substrate. This work presents B doping layers/stacks, which at the same time supply dopant atoms, passivate the B-doped crystalline Si surface sufficiently well (j{sub 0E} < 50 fA/cm{sup 2}), and show optical properties suitable for anti-reflective coating. Furthermore, these boron silicate glasses can act as a barrier against parasitic P in-diffusion during a co-diffusion step. The boron emitters diffused from the inductively coupled plasma plasma-enhanced chemical vapor-deposited B containing SiO{sub x} layers are investigated and optimized concerning passivation quality and contact properties for high-efficiency n-type solar Si cell designs. It is shown that even 10 nm thin SiO{sub x}:B films already allow for suitable emitter sheet resistance for screen-printed contacts. Furthermore, SiO{sub x}:B layers presented here allow for iV{sub OC} values of 675 mV and contact resistivity of 1 mΩcm{sup 2} for commercial Ag instead of Ag/Al pastes on the diffused boron emitter passivated with the SiO{sub x}:B layer supporting the contact formation. All of these properties can be achieved within one single B doping layer/stack.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reversible changes in the reflectivity of different types of fibre Bragg gratings

We have studied strain- and temperature-induced reversible changes in the reflectivity of different types of fibre Bragg gratings. The results demonstrate that the strain sensitivity of the reflectivity of type I and IIa Bragg gratings is mainly due to the photoinduced reduction in the elasto-optic coefficient p{sub 12} of the core glass and that its temperature sensitivity results from the increase in the thermo-optic coefficient of the glass. UV exposure of fibres loaded with molecular hydrogen has an insignificant effect on these material coefficients. We also analyse the effects of UV fluence and germanium concentration in the fibre core on the reversible changes in the reflectivity of the grating. (optical fibres)

36 MATERIALS SCIENCE↗

White cell design considerations

The White cell is a unit-magnification image relay system consisting of three noncoaxial spherical mirrors of equal curvature. The cell is used to provide a long optical path in a relatively small physical space. Multiple reflections are used, in a manner similar to a unstable laser resonator. A particular application is an optical delay line on the input of a streak camera to allow for the finite triggering time of the sweep start. This paper addresses the first- and third-order properties of the White cell. A displacement sensitivity analysis is included.

Hannan, Paul↗

Negative Electron Affinity Gallium Arsenide Photocathodes Based on Optically Resonant Nanostructure

We report the design and fabrication of a new type of negative electron affinity (NEA) gallium arsenide (GaAs)photocathode with optically resonant nanostructures. We observed a significant enhancement of the quantum efficiency(QE) from the GaAs photocathode with nanowire arrays (NWA) due to the Mie resonance effect within the intended wavelength range. Theoretical calculations of the expected reflectance behaviour together with experimental results of optical and photoemission characteristics are presented.

Zhang, Shukui↗

Method of Making Lightweight, Single Crystal Mirror

A method of making a mirror from a single crystal blank may include fine grinding top and bottom surfaces of the blank to be parallel. The blank may then be heat treated to near its melting temperature. An optical surface may be created on an optical side of the blank. A protector may be bonded to the optical surface. With the protector in place, the blank may be light weighted by grinding a non-optical surface of the blank using computer controlled grinding. The light weighting may include creating a structure having a substantially minimum mass necessary to maintain distortion of the mirror within a preset limit. A damaged layer of the non-optical surface caused by light weighting may be removed with an isotropic etch and/or repaired by heat treatment. If an oxide layer is present, the entire blank may then be etched using, for example, hydrofluoric acid. A reflecting coating may be deposited on the optical surface.

Bly, Vincent T.↗

Exo-C: A Space Mission for Direct Imaging and Spectroscopy of Extrasolar Planetary Systems

Exo-C is NASAs first community study of a modest aperture space telescope designed for high contrast observations of exoplanetary systems. The mission will be capable of taking optical spectra of nearby exoplanets in reflected light, discovering previously undetected planets, and imaging structure in a large sample of circumstellar disks. It will obtain unique science results on planets down to super-Earth sizes and serve as a technology pathfinder toward an eventual flagship-class mission to find and characterize habitable Earth-like exoplanets. We present the mission/payload design and highlight steps to reduce mission cost/risk relative to previous mission concepts. Key elements are an unobscured telescope aperture, an internal coronagraph with deformable mirrors for precise wavefront control, and an orbit and observatory design chosen for high thermal stability. Exo-C has a similar telescope aperture, orbit, lifetime, and spacecraft bus requirements to the highly successful Kepler mission (which is our cost reference). The needed technology development is on-course for a possible mission start in 2017. This paper summarizes the study final report completed in January 2015. During 2015 NASA will make a decision on its potential development.

high contrast observations↗

SWIPE: Spectral Water Inversion Processor and Emulator

Degradation of Earth’s inland water resources due to anthropogenic perturbations and climate anomalies at both local and global scales continues to place human health at substantial risk. There is now a growing necessity to develop pragmatic approaches that allow timely and effective extrapolation of local processes, to spatially resolved global products, and to promote operational and sustainable resource policy management. This presentation will be discussing the progress made developing SWIPE: Spectral Water Inversion Processor and Emulator. SWIPE is a platform for advanced modeling of coastal and inland aquatic habitats. The goal is create a comprehensive and cohesive system to leverage recent advancements in computation and machine learning to develop a synthetic training ground for sensitivity studies and algorithm development. The four principal facets of SWIPE include: 1. Advanced two-layer coated sphere bio-optical modeling and GPU radiative transfer modeling, 2. Big Data involving massive synthetic spectral libraries of optical properties of various global aquatic particles, surface reflectance, and top-of-atmosphere reflectance, all at hyperspectral resolution leveraging high-end computing systems at NASA Ames Research Center, 3. Deep Learning for algorithm development for water quality inversion of concentrations of common biogeophysical variables as well as optics, full uncertainty characterization by water type, and forward emulation, and lastly, 4. Image Processing for application of developed retrieval algorithms for both hyperspectral and multispectral sensors with experimental corrections for global adjacency, noise, sunglint, and benthic reflectance. This presentation will demonstrate the Equivalent Algal Populations (EAP) two-layer coated sphere scattering model which has been used develop spectral libraries of hyperspectral inherent optical properties of roughly 80 species of phytoplankton, covering 15 different classes and nine taxonomic functional types. The EAP model was also used to derive spectral properties of 10 different non-algal particle functional types. Examples of how the SMART-G (Speed-up Monte-carlo Advanced Radiative Transfer using GPU) radiative transfer code is used to model optically complex aquatic signals will be presented and discussed in the context of creating a massive synthetic database which can leverage the full power of next generation machine learning techniques and high end computing for water quality inversion. We will discuss our active investigation in things like appropriate model architectures, dimensionality reduction techniques such as PCA and autoencoders, uncertainty quantification and abstaining, and which variables actually benefit most from hyperspectral information versus multispectral resolution. We are also curious about questions relating to cost/benefit analysis in terms of computation resources, neural network complexity, and data volumes. Answers to these questions will hopefully elaborate on cost efficiency for potential future sensor design considerations.

SWIPE↗

Topological magneto-optical Kerr effect without spin-orbit coupling in spin-compensated antiferromagnet

The magneto-optical Kerr effect (MOKE), the differential reflection of oppositely circularly polarized light, has traditionally been associated with relativistic spin-orbit coupling (SOC), which links a particle’s spin with its orbital motion. In ferromagnets, large MOKE signals arise from the combination of magnetization and SOC, while in certain coplanar antiferromagnets, SOC-induced Berry curvature enables MOKE despite zero net magnetization. Theoretically, large MOKE can also arise in a broader class of magnetic materials with compensated spins, without relying on SOC - for example, in systems exhibiting real-space scalar spin chirality. The experimental verification has remained elusive. Here, we demonstrate such a SOC- and magnetization-free MOKE in the noncoplanar antiferromagnet Co 1/3 TaS 2 . Using a Sagnac interferometer microscope, we image domains of scalar spin chirality and their reversal. Our findings establish experimentally a new mechanism for generating large MOKE signals and position chiral spin textures in compensated magnets as a compelling platform for ultrafast, stray-field-immune opto-spintronic applications.

Magnetic properties and materials↗

An Overview of the Topography of Mars from the Mars Orbiter Laser Altimeter (MOLA)

The Mars Global Surveyor (MGS) spacecraft has now completed more than half of its one-Mars-year mission to globally map Mars. During the MGS elliptical and circular orbit mapping phases, the Mars Orbiter Laser Altimeter (MOLA), an instrument on the MGS payload, has collected over 300 million precise elevation measurements. MOLA measures the range from the MGS spacecraft to the Martian surface and to atmospheric reflections. Range is converted to topography through knowledge of the MGS spacecraft orbit. Ranges from MOLA have resulted in a precise global topographic map of Mars. The instrument has also provided measurements of the width of the backscattered optical pulse and of the 1064 nm reflectivity of the Martian surface and atmosphere. The range resolution of the MOLA instrument is 37.5 cm and the along-track resolution of MOLA ground shots is approx. 300 m; the across-track spacing depends on latitude and time in the mapping orbit. The best current topographic grid has a spatial resolution of approx. 1/16 deg and vertical accuracy of approx. one meter. Additional information is contained in the original extended abstract.

Smith, David E.↗