Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “New”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

A new phase in Ni-Sn-P system and its property as an anode material for lithium-ion batteries

A new metastable phase was synthesized by ball milling. The new phase is tetragonal with lattice parameters a = 3.671 A and c = 4.033 A. It was found that the new phase transformed into equilibrium orthorhombic Ni{sub 2}SnP phase at 973 K. The initial capacity of the lithium battery with the tetragonal Ni{sub 2}SnP phase as anode material reaches 500.4 mAh/g, but decreases to 181.8 mAh/g after 25 cycles. However, its initial irreversible capacity is 102 mAh/g, which makes it a promising anode material.

36 MATERIALS SCIENCE↗

Microstructural characterization of a new mechanically alloyed Ni-base ODS superalloy powder

The microstructure of a new Ni-base oxide dispersion strengthened superalloy powder was studied for high temperature gas turbine applications after the mechanical alloying process. In this study, an atomized powder with a composition similar to the CMSX-10 superalloy was mechanically alloyed with yttria and Hf powders. The mechanically alloyed powder included only the supersaturated solid solution γ phase without γ′ and yttria provided by severe plastic deformation, while after the 3-step aging, the γ′ phase was precipitated due to the partitioning of Al and Ta to the γ′ and Co, Cr, Re, W, and Mo to the γ phase. Mechanical alloying modified the morphology of γ′ to the new coherent γ–γ′ nanoscale lamellar structure to minimize the elastic strain energy of the precipitation, which yielded a low lattice misfit of 0.16% at high temperature. The γ′ lamellae aligned preferentially along the elastically soft [100] direction. Also, the precipitated oxide particles were refined in the γ phase by adding Hf from large incoherent YAlO{sub 3} to fine semi-coherent Y{sub 2}Hf{sub 2}O{sub 7} oxide particles with the average size of 7 nm and low interparticle spacing of 76 nm. - Highlights: • A new Ni-base ODS superalloy powder was produced by mechanical alloying. • The nanoscale γ–γ′ lamellar structure was precipitated after the aging treatment. • Fine semi-coherent Y{sub 2}Hf{sub 2}O{sub 7} oxide particles were precipitated by addition of Hf.

36 MATERIALS SCIENCE↗

A new tetragonal phase in CoFeCrGe Heusler alloy

Highlights: • CoFeCrGe ribbons were prepared. The ribbons annealed at 500 °C are composed of three compounds. • The primary compound is the L2{sub 1}-type with a = 0.571 nm and the B2 type with a = 0.286 nm in further disorder case. • The secondary compound has a cubic Cr{sub 3}Ge structure with a = 0.461 nm. • The tertiary compound is a new tetragonal structure with lattice parameters a = 0.76 nm, c = 0.284 nm. • The difference in the magnetic hysteresis loops of the samples annealed at 300 °C and 500 °C has been interpreted. - Abstract: CoFeCrGe ribbons were prepared by melt spinning and then annealed at 300 °C for 4 h and 500 °C for 4 h, respectively. The as-spun ribbons of CoFeCrGe have the B2 type structure with a = 0.287 nm. The CoFeCrGe ribbons annealed at 300 °C are composed mainly of the L2{sub 1} type structure with a = 0.578 nm in partial disorder and the B2 type structure with a = 0.289 nm in further disorder case. The ribbons annealed at 500 °C are composed of three compounds with average compositions of Co{sub 26.0}Fe{sub 26.5}Cr{sub 23.5}Ge{sub 24.0}, Co{sub 3.8}Fe{sub 6.4}Cr{sub 68.5}Ge{sub 21.3} and Co{sub 53.4}Fe{sub 30.4}Cr{sub 8.6}Ge{sub 7.6}, listed in a sequence of volume percentage from major to minor. The primary compound Co{sub 26.0}Fe{sub 26.5}Cr{sub 23.5}Ge{sub 24.0} is the L2{sub 1}-type structure with a = 0.571 nm in partial disorder and the B2 type structure with a = 0.286 nm in further disorder case. The secondary compound Co{sub 3.8}Fe{sub 6.4}Cr{sub 68.5}Ge{sub 21.3} has a cubic Cr{sub 3}Ge structure with a = 0.461 nm. The tertiary compound Co{sub 53.4}Fe{sub 30.4}Cr{sub 8.6}Ge{sub 7.6} is a new tetragonal structure with lattice parameters a = 0.76 nm, c = 0.284 nm, which were determined by using tilt-series electron diffraction technique in this work. The tertiary (Co, Fe)-rich phase is usually embedded in the matrix of the secondary Cr-rich phase, but there is no special orientation between the two phases. The difference in the magnetic hysteresis loops of the samples annealed at 300 °C and 500 °C has been interpreted as the appearance of the new tetragonal crystalline phase. Element doping is the possible way for further developing the single tetragonal phase or increasing the amount of this phase.

36 MATERIALS SCIENCE↗

Temperature dependence of deformation mechanisms and tensile strength of a new Ni-Fe-base superalloy

Highlights: • A new Ni-Fe-base superalloy with low cost has been developed. • The new alloy has excellent creep-rupture and tensile properties. • Its yield strength is insensitive to temperature below 700 °C. • The main tensile deformation mechanism of the alloy is APB shearing below 700 °C. - Abstract: After a standard heat treatment, the influence of temperature on the tensile strength and corresponding deformation mechanisms of a new Ni-Fe-base superalloy with a low γ' volume fraction are investigated in the temperature region between room temperature and 800 °C. Experimental results show that the yield strength of the experimental alloy is temperature independent below 700 °C, whereas, above the temperature, its yield strength decreases dramatically with temperature. Analyses of micromechanisms controlling the deformation behavior reveal that plastic deformation is accomplished mainly by anti-phase boundary (APB)-coupled dislocations shearing through γ' precipitates below 700 °C, while, above the temperature, the primary deformation mechanism changes from APB shearing to stacking fault shearing and then to precipitate bypassing via Orowan looping together with cross-slip and local climb of dislocations. Based on the experimental results, it is deemed that the transition in the operative strengthening mechanism with temperature accounts for the variation of the yield strength of the experimental alloy with temperature.

36 MATERIALS SCIENCE↗

Observation of a new B2 structured phase in Ti-15Mo (wt%)

Highlights: • Ti-15Mo (wt%) studied in TEM during in situ heat treatment at 300 °C. • Initial microstructure (beta and athermal omega) evolved during exposure. • New B2 phase observed during heat treatment of electron transparent material. • B2 phase formed in regular arrays of square cross-section particles. • B2 phase lattice parameter smaller than beta phase resulting in misfit strain - Abstract: The formation of non-equilibrium and transient phases in metastable beta titanium alloys during low temperature thermal treatments is currently of great interest, as they provide a potential method of controlling the size and distribution of the equilibrium alpha phase and, hence, the resulting mechanical properties. Here, for the first time, we report on the formation of a new, B2 structured phase in the Ti-Mo system. The phase was observed in electron transparent material during in situ, and following ex situ, heat treatment at 300 °C. The B2 phase was enriched in Mo compared to the surrounding matrix material and formed in regular arrays of approximately square cross-section particles interspersed by thin beta channels. Electron diffraction indicated that the lattice parameter of this new phase was smaller than that of the parent phase, leading to significant strain in the beta channels. Critically, the B2 phase was only observed in material that had been electro-polished prior to heat treatment, and, therefore, it is hypothesised that this phase forms as a result of the preparation method and thin foil effects.

36 MATERIALS SCIENCE↗

New quenched-in fluorite-type materials in the Bi{sub 2}O{sub 3}-La{sub 2}O{sub 3}-PbO system: Synthesis and complex phase behaviour up to 750 {sup o}C

Research highlights: {yields} New quenched-in fluorite-type materials synthesised by solid state reaction. {yields} Compositions (BiO{sub 1.5}){sub 0.94-x}(LaO{sub 1.5}){sub 0.06}(PbO){sub x}, x = 0.02, 0.03, 0.04 and 0.05. {yields} Variable-temperature X-ray diffraction data collected in the range of 400-750 {sup o}C. {yields} Fluorite-type structure transforms during heating, complex phase behaviour characterised. {yields} Tetragonal, monoclinic, rhombohedral and bcc phases identified. -- Abstract: New quenched-in fluorite-type materials with composition (BiO{sub 1.5}){sub 0.94-x}(LaO{sub 1.5}){sub 0.06}(PbO){sub x}, x = 0.02, 0.03, 0.04 and 0.05, were synthesised by solid state reaction. The new materials undergo a number of phase transformations during heating between room temperature and 750 {sup o}C, as indicated by differential thermal analysis. Variable temperature X-ray diffraction performed on the material (BiO{sub 1.5}){sub 0.92}(LaO{sub 1.5}){sub 0.06}(PbO){sub 0.02} revealed that the quenched-in fcc fluorite-type material first undergoes a transformation to a {beta}-Bi{sub 2}O{sub 3}-type tetragonal phase around 400 {sup o}C. In the range 450-700 {sup o}C, {alpha}-Bi{sub 2}O{sub 3}-type monoclinic, Bi{sub 12}PbO{sub 19}-type bcc and {beta}{sub 1}/{beta}{sub 2}-type rhombohedral phases, and what appeared to be a {epsilon}-type monoclinic phase, were observed, before a single-phase fluorite-type material was regained at 750 {sup o}C.

36 MATERIALS SCIENCE↗

Electron beam induced structural evolution in Fe{sub 3}O{sub 4}/SiO{sub 2} particles: A new route to obtain movable core structures

Graphical abstract: SiO{sub 2} hollow spheres with movable Fe{sub 3}O{sub 4} cores were obtained by exposing the Fe{sub 3}O{sub 4}/SiO{sub 2} particles to the electron beam of TEM. It is a new route to obtain movable core nanostructures. Research highlights: {yields} SiO{sub 2} hollow particles with movable Fe{sub 3}O{sub 4} cores were obtained. {yields} Irradiation of electron beam induced the structural evolution. {yields} A new route to obtain hollow particles with movable core. -- Abstract: SiO{sub 2} hollow spheres with movable Fe{sub 3}O{sub 4} core were obtained by exposing the pre-synthesized Fe{sub 3}O{sub 4}/SiO{sub 2} particles (with an adsorption interlayer of ethylene glycol) under the irradiation of electron beam inside transmission electron micrograph (TEM). In the formation process, the evaporation of adsorbed ethylene glycol and the evolution of amorphous SiO{sub 2} layer played important roles, and that should be attributed to the high temperature and trapped charges induced by the irradiation of electron beam. This work provided a new route to obtain particles with movable core structure and extended the applications of electron beam.

36 MATERIALS SCIENCE↗

A new green phosphor of SrAl{sub 2}O{sub 4}:Eu{sup 2+},Ce{sup 3+},Li{sup +} for alternating current driven light-emitting diodes

Graphical abstract: Display Omitted Highlights: ► This work focuses on exploring new phosphors of SrAl{sub 2}O{sub 4}:Eu{sup 2+},Ce{sup 3+},Li{sup +} for AC LEDs. ► The work provides a new route to synthesize the pure phase of SrAl{sub 2}O{sub 4}. ► The formation of the impurity phase of Sr{sub 4}Al{sub 14}O{sub 25} was suppressed by using Ce{sup 3+}. ► Charger defects were compensated by using Li{sup +}. ► The luminescence intensity was enhanced significantly by co-doping Ce{sup 3+} and Li{sup +}. -- Abstract: New phosphors are desired to overcoming the flickering luminescence of alternating current light-emitting diodes (AC-LEDs) by compensating dark duration with appropriately persistent luminescence. Here, the phosphor of SrAl{sub 2}O{sub 4}:Eu{sup 2+},Ce{sup 3+},Li{sup +} was developed for this application. The phosphor was synthesized with solid-state reaction method by using H{sub 3}BO{sub 3} as flux. The XRD patterns show that the impurity phase of Sr{sub 4}Al{sub 14}O{sub 25} which always formed together with SrAl{sub 2}O{sub 4} during reaction was suppressed by using Ce. The charger defects caused by the non-equivalent substitution of Sr{sup 2+} with Ce{sup 3+} were compensated with Li{sup +}. Thus, the luminescence intensity of SrAl{sub 2}O{sub 4}:Eu{sup 2+} was enhanced significantly by co-doping Ce{sup 3+} and Li{sup +}. The fluorescence lifetime of the phosphor is about 36.5 ms. The energy dispersive spectra (EDS) assisted with scanning electron microscope (SEM) pictures reveal that Ce ions mainly distribute along grain boundary.

36 MATERIALS SCIENCE↗

Preparation and structure of BiCrTeO{sub 6}: A new compound in Bi–Cr–Te–O system. Thermal expansion studies of Cr{sub 2}TeO{sub 6}, Bi{sub 2}TeO{sub 6} and BiCrTeO{sub 6}

Graphical abstract: A new compound BiCrTeO{sub 6} in the Bi–Cr–Te–O system was prepared by solid state route and characterized by X-ray diffraction method. The crystal structure of BiCrTeO{sub 6} shows that there is one distinct site for bismuth (Bi) atom (pink color), one chromium rich (Cr/Te = 68/32) (blue/green color), one tellurium rich (Te/Cr = 68/32) sites (green/blue color), and one distinct site for oxygen (O) atom (red color) in the unit cell. All cations in this structure show an octahedral coordination with oxygen atoms at the corners. The thermogram (TG) of the compound in air shows that it is stable up to 1103 K and decomposes thereafter. The thermal expansion behaviour of BiCrTeO{sub 6} was studied using high temperature X-ray diffraction method from room temperature to 923 K under vacuum of 10{sup −8} atmosphere and showed positive thermal expansion with the average volume thermal expansion coefficients of 16.0 × 10{sup −6}/K. - Highlights: • A new compound BiCrTeO{sub 6} in Bi–Cr–Te–O system was prepared and characterized. • The crystal structure of BiCrTeO{sub 6} was determined by Rietveld refinement method. • The structure of BiCrTeO{sub 6} shows an octahedral coordination for all the metal ions. • The thermal expansion behavior of BiCrTeO{sub 6} from room temperature to 923 K showed a positive thermal expansion. • The average volume thermal expansion coefficient for BiCrTeO{sub 6} is 16.0 × 10{sup −6}/K. - Abstract: A new compound BiCrTeO{sub 6} in Bi–Cr–Te–O system was prepared by solid state reaction of Bi{sub 2}O{sub 3}, Cr{sub 2}O{sub 3} and H{sub 6}TeO{sub 6} in oxygen and characterized by X-ray diffraction (XRD) method. It could be indexed on a trigonal lattice, with the space group P-31c, unit cell parameters a = 5.16268(7) Å and c = 9.91861(17) Å. The crystal structure of BiCrTeO{sub 6} was determined by Rietveld refinement method using the powder XRD data. Structure shows that there is one distinct site for bismuth (Bi) atom, one chromium rich (Cr/Te = 68/32), and one tellurium rich (Te/Cr = 68/32) sites, and one distinct site for oxygen (O) atom in the unit cell. All cations in this structure show an octahedral coordination with oxygen atoms at the corners. The thermogravimetric analysis (TGA) of the compound in air shows that it is stable up to 1103 K and decomposes thereafter. The thermal expansion behavior of Cr{sub 2}TeO{sub 6}, Bi{sub 2}TeO{sub 6} and BiCrTeO{sub 6} was studied using High Temperature X-ray diffraction (HTXRD) method from room temperature to 973, 873 and 923 K respectively under vacuum of 10{sup −8} atmospheres. All the compounds showed positive thermal expansion with the average volume thermal expansion coefficients of 14.38 × 10{sup −6}/K, 22.0 × 10{sup −6}/K and 16.0 × 10{sup −6}/K respectively.

36 MATERIALS SCIENCE↗

Synthesis of new structurally related cyanamide compounds LiM(CN{sub 2}){sub 2} where M is Al{sup 3+}, In{sup 3+} or Yb{sup 3+}

Highlights: • New cyanamide compounds LiM(CN{sub 2}){sub 2} where M is Al{sup 3+}, In{sup 3+} or Yb{sup 3+}. • New luminescent material LiIn(CN{sub 2}){sub 2}:Tb{sup 3+}. • Reduction in efficiency of luminescence with temperature increase. - Abstract: New ternary cyanamide compounds isostructural to LiY(CN{sub 2}){sub 2} were obtained by solid state metathesis reaction. The crystal structure of LiAl(CN{sub 2}){sub 2} was determined by single crystal X-ray diffraction, the structures of LiIn(CN{sub 2}){sub 2} and LiYb(CN{sub 2}){sub 2} were solved from X-ray powder diffraction data. Photoluminescence properties of Tb{sup 3+}-doped LiIn(CN{sub 2}){sub 2} are reported too.

36 MATERIALS SCIENCE↗

Towards the development of new phosphors with reduced content of rare earth elements: Structural and optical characterization of Ce:Tb: Al{sub 2}SiO{sub 5}

Highlights: • A new promising inert matrix as host of luminescent ions is proposed. • Al2SiO5 matrix is free from Rare earths (critical raw materials). • Doping the matrix with Ce and Tb we obtain an efficient green emitter. • Cerium acts as sensitizer for Terbium emission. - Abstract: A new promising inert matrix as host of luminescent ions is proposed. Al2SiO5 samples, doped with rare earths (Ce, Tb single doped and co-doped) are proposed as good prospect for the development of new UV–vis converter with reduced content of rare earths elements. Structural characterization by Raman, XRD spectroscopy and TEM imaging reveals the sillimanite phase and nano sized dimension of the investigated powders. Optical characterization by steady time and time resolved emission spectroscopy for the single doped and co-doped samples allows to identify an efficient energy transfer from Ce to Tb ions under near UV excitation wavelength. The intense green emission observed in the Ce:Tb co-doped Al2SiO5 system suggests its potential application as efficient blue pumped green emitter phosphor to be exploited for white LED: to this purpose we tested the compound in combination with a red emitting doping ion recording for Ce:Tb:Cr:ASO system a correlated color temperature of 6720 K.

36 MATERIALS SCIENCE↗

New large-strain FFT-based formulation and its application to model strain localization in nano-metallic laminates and other strongly anisotropic crystalline materials

This paper presents a new robust large-strain (LS) elasto-viscoplastic (EVP) formulation based on Fast Fourier Transforms (FFTs) for the prediction of the micro-mechanical response and microstructure evolution of polycrystalline and multiphase materials, with emphasis on the effect of strong crystallographic and/or morphologic anisotropy on localization of plastic deformation. In this work, the novel LS-EVPFFT formulation allows treatment of complex initial geometries and large deformations considering three grids of material points: a regular grid in the reference configuration, where FFTs can be performed; an irregular grid in the initial configuration, created by applying a stress-free displacement field to the reference regular grid; and an irregular grid in the current configuration, undergoing large strains and rotations as the material is loaded. Further numerical stability of the new formulation also required the use of a novel expression for the discrete modified Green’s operator, which reduces spurious field oscillations. After presenting and validating the new formulation by comparison with preexisting implementations and analytical solutions, LS-EVPFFT is applied to the prediction of slip and kink bands formation in polycrystalline columnar ice, and kink bands in single crystal zinc wires, showing good agreement with classic experiments. Finally, the model is used to study kink band formation during compression of Cu–Nb nano-metallic laminates (NMLs), in which accurate treatment of the complex geometry associated with the tortuosity of interfaces and large deformations become critical, showing consistency with corresponding micropillar experiments.

36 MATERIALS SCIENCE↗

ENDF/B-VIII.0: The 8 th Major Release of the Nuclear Reaction Data Library with CIELO-project Cross Sections, New Standards and Thermal Scattering Data

We describe the new ENDF/B-VIII.0 evaluated nuclear reaction data library. ENDF/B-VIII.0 fully incorporates the new IAEA standards, includes improved thermal neutron scattering data and uses new evaluated data from the CIELO project for neutron reactions on 1 H, 16 O, 56 Fe, 235 U, 238 U and 239 Pu described in companion papers in the present issue of Nuclear Data Sheets. The evaluations benefit from recent experimental data obtained in the U.S. and Europe, and improvements in theory and simulation. Notable advances include updated evaluated data for light nuclei, structural materials, actinides, fission energy release, prompt fission neutron and γ-ray spectra, thermal neutron scattering data, and charged-particle reactions. Integral validation testing is shown for a wide range of criticality, reaction rate, and neutron transmission benchmarks. In general, integral validation performance of the library is improved relative to the previous ENDF/B-VII.1 library.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New BNL 3D-Trench Electrode Si Detectors for Radiation Hard Detectors for sLHC and for X-ray Applications

A new international-patent-pending (PCT/US2010/52887) detector type, named here as 3D-Trench electrode Si detectors, is proposed in this work. In this new 3D electrode configuration, one or both types of electrodes are etched as trenches deep into the Si (fully penetrating with SOI or supporting wafer, or non-fully penetrating into 50-90% of the thickness), instead of columns as in the conventional ('standard') 3D electrode Si detectors. With trench etched electrodes, the electric field in the new 3D electrode detectors are well defined without low or zero field regions. Except near both surfaces of the detector, the electric field in the concentric type 3D-Trench electrode Si detectors is nearly radial with little or no angular dependence in the circular and hexangular (concentric-type) pixel cell geometries. In the case of parallel plate 3D trench pixels, the field is nearly linear (like the planar 2D electrode detectors), with simple and well-defined boundary conditions. Since each pixel cell in a 3D-Trench electrode detector is isolated from others by highly doped trenches, it is an electrically independent cell. Therefore, an alternative name 'Independent Coaxial Detector Array', or ICDA, is assigned to an array of 3D-Trench electrode detectors. The electric field in the detector can be reduced by a factor of nearly 10 with an optimal 3D-Trench configuration where the junction is on the surrounding trench side. The full depletion voltage in this optimal configuration can be up to 7 times less than that of a conventional 3D detector, and even a factor of two less than that of a 2D planar detector with a thickness the same as the electrode spacing in the 3D-Trench electrode detector. In the case of non-fully penetrating trench electrodes, the processing is true one-sided with backside being unprocessed. The charge loss due to the dead space associated with the trenches is insignificant as compared to that due to radiation-induced trapping in sLHC environment. Since the large electrode spacing (up to 500 {micro}m) can be realized in the 3D-Trench electrode detector due to their advantage of greatly reduced full depletion voltage, detectors with large pixel cells (therefore small dead volume) can be made for applications in photon science (e.g. X-ray).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Warp-X: A new exascale computing platform for beam–plasma simulations

Turning the current experimental plasma accelerator state-of-the-art from a promising technology into mainstream scientific tools depends critically on high-performance, high-fidelity modeling of complex processes that develop over a wide range of space and time scales. As part of the U.S. Department of Energy's Exascale Computing Project, a team from Lawrence Berkeley National Laboratory, in collaboration with teams from SLAC National Accelerator Laboratory and Lawrence Livermore National Laboratory, is developing a new plasma accelerator simulation tool that will harness the power of future exascale supercomputers for high-performance modeling of plasma accelerators. We present the various components of the codes such as the new Particle-In-Cell Scalable Application Resource (PICSAR) and the redesigned adaptive mesh refinement library AMReX, which are combined with redesigned elements of the Warp code, in the new WarpX software. Lastly, the code structure, status, early examples of applications and plans are discussed.

43 PARTICLE ACCELERATORS↗

Comparative analysis of new crystal and plastic scintillators for fast and thermal neutron detection

This paper considers scintillation and physical properties of efficient organic scintillators tested as single crystals and as components of plastics with pulse shape discrimination (PSD). For the first time, single crystals of 9,9-dimethyl-2-phenyl-9H-fluorene (PhF) were grown for studies of the basic scintillation properties of this new compound. Comparison to classical organic crystals, like anthracene, trans-stilbene, and p-terphenyl, and to more recently introduced organic glass showed that the new crystal belongs to a group of the most efficient scintillators, with light output exceeding that of trans-stilbene and PSD comparable to that of p-terphenyl. Furthermore, additional studies were conducted to evaluate scintillation performance and physical properties, like hardness and dye leaching, of plastic scintillators prepared with PhF, organic glass, and liquid diisopropylnaphthalene (DIPN) that were considered as examples for potential replacement of PPO (2,5-diphenyloxazole) in current commercial PSD plastic scintillators. Comparison of the highest performing plastic scintillators prepared with these dyes shows that PhF formulations produced a record light output (LO) increase of 69 % relative to EJ-200. Similar improvements obtained with 6 Li-loaded formulations showed that future development of PSD plastics should not be limited to use of PPO but must involve the search and exploration of new efficient dyes that may lead to discovery of much brighter organic scintillators with improved physical properties required for fast and thermal neutron detection, fast neutron spectroscopy, and antineutrino detection applications.

9,9-dimethyl-2-phenyl-9H-fluorene↗

A new fuel modeling capability, CTFFuel, with a case study on the fuel thermal conductivity degradation

Here, a new fuel modeling capability, CTFFuel, is developed from the subchannel code, CTF. This code is a standalone interface to the CTF fuel rod models, allowing for fuel rod simulations to be run independently from the fluid. This paper provides an overview of the code with a case study on the thermal conductivity degradation of LWR fuels to demonstrate its capabilities. The modeling of fuel thermal conductivity degradation in the code is improved through the addition of new modeling options to account for the irradiation effects via globally defined parameters. After the initial implementation, a variety of order-of-accuracy tests and code comparisons are performed to test software quality. A controlled analysis is allowed by CTFFuel to verify the numerical scheme of CTF’s conduction solution and to benchmark its fuel temperature predictions against FRAPCON-4.0’s. Overall, the software quality and verification procedure ensures that the new model is coded correctly, that it properly interacts with the rest of the code.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Ferromagnetic quantum criticality: New aspects from the phase diagram of LaCrGe 3

Some Recent theoretical and experimental studies have shown that ferromagnetic quantum criticality is always avoided in clean systems. Two possibilities have been identified. In the first scenario, the ferromagnetic transition becomes of the first order at a tricritical point before being suppressed. A wing structure phase diagram is observed indicating the possibility of a new type of quantum critical point under magnetic field. In a second scenario, a transition to a modulated magnetic phase occurs. Our earlier studies on the compound LaCrGe 3 illustrate a third scenario where not only a new magnetic phase occurs, but also a change of order of the transition at a tricritical point leading to a wing-structure phase diagram. Careful experimental study of the phase diagram near the tricritical point also illustrates new rules near this type of point.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗