Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Recalcitrance Assessment of the Agro-industrial Residues from Five Agave Species: Ionic Liquid Pretreatment, Saccharification and Structural Characterization

Agave has recently shown its potential as a bioenergy feedstock with promising features such as higher biomass productivity than leading bioenergy feedstock while at the same time being drought-resistant with low water requirements and high sugar to ethanol conversion using ionic liquid (IL) pretreatment. Here, IL pretreatment was studied to develop the first direct side-by-side comparative recalcitrance assessment of the agro-industrial residues from five Agave species [ Agave americana (AME), A. angustifolia (ANG), A. fourcroydes (FOU), A. salmiana (SAL), and A. tequilana (TEQ)] using compositional analysis, X-ray diffraction, and the lignin syringyl/guaiacyl subunit ratio (S/G) by pyrolysis molecular beam mass spectrometry (PyMBMS). Prominent calcium oxalate peaks were found only in unpretreated AME, SAL, and TEQ. The S/G ratios of all five unpretreated Agave species were between 1.27 and 1.57 while the IL-pretreated samples were from 1.39 to 1.72. The highest overall sugar production was obtained with IL-pretreated FOU with 492 mg glucose/g biomass and 157 mg xylose/g biomass at 120°C and 3 h using 1-ethyl-3-methylimidazolium acetate ([C 2 C 1 Im][OAc]). An estimated theoretical ethanol yield from the studied agro-industrial residues from the five Agave species was in the range of 1060 to 5800 L ethanol/ha/year. These comparison results demonstrate the potential of the Agave spp. as a suitable biofuel feedstock which can be employed within a biorefinery scheme.

09 BIOMASS FUELS↗

Nitric-acid hydrolysis of Miscanthus giganteus to sugars fermented to bioethanol

Miscanthus giganteus ( M. giganteus ) is a promising feedstock for the production of bioethanol or biochemicals. Using only dilute nitric acid, this work describes a two-step process for hydrolyzing hemicellulose and cellulose to fermentable sugars. Primary variables were temperature and reaction time. The solid-to-liquid mass ratio was 1:8. No enzymes were used. In the first step, M. giganteus was contacted with 0.5 wt.% nitric acid at temperatures between 120 and 160°C for 5 to 40 min. The second step used 0.5 or 0.75 wt.% nitric acid at temperatures between 180 and 210°C for less than 6 min. Under selected conditions, almost all hemicellulose and 58% cellulose were transferred to the liquid phase. Small amounts of degradation products were observed. The xylose solution obtained from the nitric-acid hydrolysis was fermented for 96 h and the glucose solution for 48 h to yield 0.41 g ethanol/g xylose and 0.46 g ethanol/g glucose. To characterize residual solids and the liquor from both steps, nuclear-magneticresonance (NMR) spectroscopy was performed for each fraction. In conclusion, the analytical data indicate that the liquid phase from Steps 1 and 2 contain little lignin or lignin derivatives.

09 BIOMASS FUELS↗

Ash Reduction of Corn Stover by Mild Hydrothermal Preprocessing

Lignocellulosic biomass such as corn stover can contain high ash content, which may act as an inhibitor in downstream conversion processes. Most of the structural ash in biomass is located in the cross-linked structure of lignin, which is mildly reactive in basic solutions. Four organic acids (formic, oxalic, tartaric, and citric) were evaluated for effectiveness in ash reduction, with limited success. Because of sodium citrate’s chelating and basic characteristics, it is effective in ash removal. More than 75 % of structural and 85 % of whole ash was removed from the biomass by treatment with 0.1 g of sodium citrate per gram of biomass at 130 °C and 2.7 bar. FTIR, fiber analysis, and chemical analyses show that cellulose and hemicellulose were unaffected by the treatment. ICP–AES showed that all inorganics measured were reduced within the biomass feedstock, except sodium due to the addition of Na through the treatment. Sodium citrate addition to the preconversion process of corn stover is an effective way to reduced physiological ash content of the feedstock without negatively impacting carbohydrate and lignin content.

09 BIOMASS FUELS↗

Biocatalytic system for comparatively assessing the functional association of monolignol cytochrome P450 monooxygenases with their redox partners

Lignin is a complex heterogenous polymer derived from oxidative radical polymerization of three monolignols, i.e., p-coumaryl alcohol, coniferyl alcohol and sinapyl alcohol. These lignin monomeric precursors structurally differ in their methoxy groups of the benzene rings. In phenylpropanoid-monolignol biosynthetic pathway, the endoplasmic reticulum (ER)-resident cytochrome P450 monooxygenases, cinnamate 4-hydroxylase, coumaroyl ester 3´-hydroxylase and ferulate 5-hydroxylase, establish the key structural characteristics of monolignols. The catalysis of cytochrome P450 monooxygenase requires reducing power, which is supplied by the ER electron transfer chains, composed of cytochrome P450 oxidoreductase (CPR), cytochrome b5 reductase (CBR) and/or cytochrome b5 protein (CB5), from cofactor NADPH or NADH. While NADPH-dependent CPR serves as the typical electron donor for most P450 enzymes, in some cases, the CBR-CB5 or CPR-CB5 electron transfer system also transfers electrons to the terminal P450 enzymes. There are tremendous studies focusing on the discovery and characterization of cytochrome P450 monooxygenases. However, very limited attention has been paid to the versatility and the roles of electron transfer components in the P450 catalytic system. Due to the membrane-residence property of both P450 enzymes and electron transfer components, it is challenging to establish an effective experimental system to evaluate the functional association of P450s with their redox partners. This chapter describes a yeast cell biocatalytic system and the related experimental procedures for comparatively assessing the functional relationship of monolignol biosynthetic P450 enzymes and different redox partners in their catalysis.

59 BASIC BIOLOGICAL SCIENCES↗

Variations in cell wall traits impact saccharification potential of Salix famelica and Salix eriocephala

Increasing global populations, finite arable land, and the anthropogenic release of carbon dioxide into the atmosphere are driving the search for bio-based alternatives to the petroleum-derived fuels and chemicals that underpin the global economy. With rapid growth rates, a propensity for coppicing, and a wide geographic range across Canada, native shrub willows (Salix spp.) are an attractive source of low-input, high-volume biomass. To date, most willow research has focused on increasing yields and improving cropping systems, while comparatively little work has been done to assess the intrinsic diversity in cell wall traits and bioenergy potential. In this study, we characterized the cell wall composition and wood ultrastructure of 338 xylem samples from two Canadian willow species, Salix famelica and Salix eriocephala, harvested from a common garden experimental plot. Lignin content ranged from 17.5–25.1% in S. famelica and 18.6–24.3% in S. eriocephala. Following alkali pretreatment with 62.5 mM NaOH at 90 °C for 3 h and a 70-h enzymatic digestion with Accellerase 1000, glucose release ranged from 23.0–38.9 wt% in S. famelica and from 20.5–37.7 wt% in S. eriocephala, while xylose release ranged from 9.4–14.9% in S. famelica and from 9.5–15.2% in S. eriocephala. Here, partial least squares regression modelling showed that lignin content and composition were important negative regulators of glucose release. Overall, this work highlights the innate variability in cell wall traits of native willows and identifies potential genotypes that should be considered in future breeding and deployment strategies for Canadian bioenergy production.

59 BASIC BIOLOGICAL SCIENCES↗

Graphitization of banana peel – synergistic effect of Ca and other elements of the biomass on carbon structure transformation

Recently, growing interest has been observed in using calcium as an effective catalyst for graphitizing disordered carbon materials derived from biomass and bioprecursors, such as cellulose and lignin, at relatively low tem peratures (<2000 °C). Herein, it is demonstrated that in the presence of elements such as calcium, silicon, sulfur, and potassium, which are abundant in banana peel composed of cellulose and lignin base, graphitization occurs much more effectively. The addition of external calcium source, in the form of calcium carbonate, to the banana peel-derived carbon and heat-treatment of the mixture under protective atmosphere up to 1750 °C results in a significant increase in the degree of the graphitization order and local formation of graphite crystals, whereas the same preparation and heat-treatment procedure applied to carbon material derived from pristine cellulose does not lead to such effective graphitization. It is indicated that the graphitization of banana peel carbon occurs due to the synergistic effect of the external Ca-based catalyst and the internal elements present in the raw biomass, supporting the transformation of the disordered graphene-like layers into graphitic structures. These findings are important for the future production of green graphite from biomass

09 BIOMASS FUELS↗

Specific Effects of Fiber Size and Fiber Swelling on Biomass Substrate Surface Area and Enzymatic Digestibility

To clarify the specific effect of biomass substrate surface area on its enzymatic digestibility, factors of fiber size reduction and swelling changes were investigated by using poplar substrates with controlled morphological and chemical properties after modified chemical pulping. Results showed that fiber size changes had insignificant influence on enzymatic hydrolysis, although the external surface area increased up to 41% with the reduction of fiber size. Swelling changes caused by increased biomass fiber porosities after PFI refining showed a significant influence on the efficiency of enzymatic hydrolysis. It is also found that chemical properties such as xylan and lignin content can influence the swelling effect. Xylan is confirmed to facilitate substrate hydrolysability by swelling, while lignin restricts swelling effect and thus minimizes the enzyme accessibility to substrates.

Environmental Molecular Sciences Laboratory↗

Characterization of products from hydrothermal carbonization of pine

This study aims to reveal the structural features and reaction pathways for solid–liquid products from hydrothermal carbonization of Loblolly pine, where the solid products can be used as catalysts, adsorbents and electrode materials while liquid products can be treated yielding fuels and platform chemicals. Results revealed when treated at 240 °C, cellulose and hemicellulose were degraded, in part, to 5-hydroxy-methyl furfural and furfural which were further transformed to aromatic structures via ring opening and Diels Alder reactions. Lignin degradation and formation of carbon–carbon bonds, forming aromatic motifs in the presence of furanic compounds connected via aliphatic bridges, ether or condensation reactions. After hydrothermal treatment, condensed aromatic carbon materials with methoxy groups were recovered with high fixed carbon content and HHV. As a result, the recovered liquid products are lignin-like value-added chemicals consisting of furfural and polyaromatic structure with alkanes and carboxyl, their total hydroxyl group content decreased when increasing reaction time.

36 MATERIALS SCIENCE↗

Kinetic understanding of nitrogen supply condition on biosynthesis of polyhydroxyalkanoate from benzoate by Pseudomonas putida KT2440

Nitrogen supply is critical to the synthesis of intracellular PHA in various bacteria. However, the specific role of the nitrogen in synthesizing PHA from benzoate, a lignin model compound use for the study of bacteria catabolism of aromatics, is still not clear. Here, two culture conditions were maintained for Pseudomonas putida KT2440 to produce PHA using benzoate as a carbon source. Under nitrogen-limited and surplus conditions, the accumulation of PHA was to 37.3% and 0.25% of cell dry weight, respectively. A model fit to the kinetics of biomass growth and PHA accumulation showed good agreement with data. GC–MS and NMR showed that PHA contained six hydroxyl fatty acid monomers under nitrogen-limited conditions, while two monomers were identified under nitrogen surplus conditions. The average molecular weight of PHA increased after the nitrogen source was exhausted. Lastly, these results provide a promising strategy for optimization of lignin to PHA yields.

59 BASIC BIOLOGICAL SCIENCES↗

Conversion of depolymerized sugars and aromatics from engineered feedstocks by two oleaginous red yeasts

One of the requirements for efficient biological conversion of lignocellulose to bioproducts is the compatibility of biological catalysts with the processes employed to solubilize and depolymerize the lignocellulosic components. The red yeasts Rhodosporidium toruloides and Rhodotorula mucilaginosa were evaluated for their ability to assimilate sugars and aromatic compounds extracted from two engineered lines of Arabidopsis thaliana with modified lignin or the wild-type using ionic liquid, acid or alkaline pretreatments. Differential amounts of monomeric sugars, organic acids and, in the case of the engineered lines, either 4-hydroxybenzoic or protocatechuic acid were additionally released from the biomass and found to be tolerated and consumed by both microorganisms. Genetically-engineered strains of the two red yeasts successfully converted the depolymerized products into the biofuel precursor bisabolene when cultivated on hydrolysates or synthetic media containing specific sugars, acids and aromatics found in the hydrolysates.

Rodriguez, Alberto↗

A chemical-recovery-free ammonium sulfite-based alkali pretreatment of corn stover for low-cost sugar production via fertilizer use of waste liquor

The production of cellulosic sugars is a pivotal strategy for advancing biomass bioconversion. This study evaluated the pretreatment of corn stover using ammonium sulfite and potassium hydroxide to develop comprehensive data on sugar, lignin, chemicals, and overall mass recovery profiles in a batch reactor at 80 °C. The results indicated significant improvements in delignification, deacetylation, enzymatic digestibility, and overall sugar yield. Specifically, pretreating corn stover with a solution of 40 wt% potassium hydroxide and 15 wt% ammonium sulfite at 80 °C for 2 h achieved 78.9 % lignin removal and 82.1 % acetyl removal, resulting in a total sugar yield exceeding 87.5 % with an enzyme loading of 12.5 mg protein/g-glucan plus xylan. The pretreated spent liquor, containing ammonium, potassium, sulfur, biomass-derived organics, and inorganics, demonstrated substantial potential as a fertilizer. The techno-economic analysis projected a minimum sugar selling price of $0.285 per pound, supporting the ongoing development and implementation of chemical-recovery-free pretreatment technology.

09 BIOMASS FUELS↗

Genetic manipulation of lignocellulosic biomass for bioenergy

Here, lignocellulosic biomass represents an abundant and sustainable raw material for biofuel production. The recalcitrance of biomass to degradation increases the estimated cost of biofuel production and limits its competitiveness in the market. Genetic engineering of lignin, a major recalcitrance factor, improves saccharification and thus the potential yield of biofuels. Furthermore, our understanding of lignification and its regulation has been advanced by new studies in various systems, all of which further enhances our ability to manipulate the biosynthesis and deposition of lignin in energy crops for producing cost-effective second generation biofuels.

09 BIOMASS FUELS↗

Investigating biomass composition and size effects on fast pyrolysis using global sensitivity analysis and CFD simulations

It is notoriously difficult to build an accurate universal model for biomass pyrolysis due to its sensitivity to a wide number of critical material attributes such as chemical species and physical sizes. In this work, a biomass pyrolysis kinetics with 32 heterogeneous reactions and 59 species was implemented in an open-source multiphase computational fluid dynamics (CFD) software MFiX and validated against two different experimental pyrolysis data sets that provided detailed data describing chemical component yields. The reaction scheme was then used to build a surrogate model and assess the sensitivity of pyrolysis yields to feedstock compositions. The sensitivity analysis determined that the yield of bio-char showed a strong positive sensitivity to the carbon-rich lignin and tannin pseudo-species in the reaction scheme while the bio-oil and bio-gas were correlated to oxygen-rich lignin pseudo-species. The reaction scheme was then integrated into a coarse-grained discrete element model to simulate fast pyrolysis in a bubbling fluidized bed over a range of feedstock particle sizes. The reactor simulations showed further sensitivity to particle size and hydrodynamics. Notably, particles under 0.5 mm have small heat transfer limitations but left the reactor before completely converting and thus reduced the bio-oil yield. Results from this study can be used to guide future development of highly accurate models for fast pyrolysis reactors with a variety of feedstock properties and operating conditions.

09 BIOMASS FUELS↗

The role of catalytic iron in enhancing volumetric sugar productivity during autothermal pyrolysis of woody biomass

Passivation of naturally occurring AAEM in biomass enhances sugar yields from the fast pyrolysis of biomass by preventing these metals from catalyzing the fragmentation of pyranose rings in cellulose and hemicellulose. However, because AAEM also catalyzes lignin depolymerization, its passivation can be accompanied by undesirable char agglomeration. Pretreatment of biomass with ferrous sulfate both passivates AAEM and substitutes ferrous ions as lignin depolymerization catalysts. This pretreatment has been particularly successful for high ash biomass like corn stover, but of limited value for low ash biomass like wood. This study explores the reasons for this discrepancy and offers a combined pretreatment of ferrous sulfate and ferrous acetate pretreatment to overcome char agglomeration in wood. Furthermore, this new pretreatment increased sugar yields from 4.4 wt% to 15.5 wt% and 5.4 wt% to 19.0 wt% for hardwood and softwood biomasses, respectively. This pretreatment produces an iron-rich biochar that catalyzes oxidation of the biochar under the oxygen-rich conditions of autothermal pyrolysis, which is preferentially consumed to provide the enthalpy for pyrolysis, preserving bio-oil as a more desirable energy product. Instead of producing carbon monoxide, which dominates oxidation of biochar from untreated biomass, the iron catalyzes oxidation to carbon dioxide, producing more energy per mole of oxygen consumed. In fact, oxygen demand to support autothermal pyrolysis of red oak and southern yellow pine was reduced 15% by the presence of iron in the biochar.

42 ENGINEERING↗

Coupling AFEX and steam-exploded sugarcane residue pellets with a room temperature CIIII-activation step lowered enzyme dosage requirements for sugar conversion

In this study, the potential integration of steam explosion (StEx) and ammonia fiber expansion (AFEX) with existing sugar/ethanol mills to form decentralized pre-processing depots was explored. Both StEx and AFEX pretreatment facilitated the production of sugarcane bagasse (SCB) and cane leaf matter (CLM) pellets with significantly higher bulk density, mechanical durability, and hydrophobicity relative to their untreated biomass pellet controls. However, ethanol production from standalone StEx and AFEX-treated SCB and CLM pellets required enzyme dosages greater than 21 mg/g glucan to achieve enzymatic hydrolysis sugar yields of 75% and ethanol titres greater than 40 g.L -1 . Coupling AFEX-treated SCB or CLM pellets with a room temperature CIII I -activation step using liquid ammonia lowered enzyme dosage requirements by more than 50% without affecting ethanol titers and production yields (greater than300 L per Mg residual dry matter raw dry biomass (RDM)). In contrast, treating StEx-treated pellets with CIIII-activation using liquid ammonia did not result in similar enzyme dosage reductions, due to pseudo-lignin formation, leading to enzyme deactivation and/or lignin blockage that retarded enzymatic hydrolysis at low enzyme dosages. A gross energy conversion assessment revealed that low enzyme dosage (3-4 mg enzyme/g RDM) ethanol and electricity co-production from AFEX and CIII I -activated SCB and CLM can recover up to 73% of the energy in the untreated biomass, compared to 54% recovered by StEx and CIII I -activation. The results from this work suggest that StEx or AFEX based pre-processing depots can produce dense and mechanically durable biomass pellets. The AFEX-treated pellets can be easily upgraded using a room temperature CIII I -activation step at the biorefinery to significantly reduce bioconversion enzymes.

42 ENGINEERING↗

Pectin-associated mannans and xylans play distinct roles in cell-cell adhesion in pine and poplar wood

Wood particles of pine required longer treatments of acidic chlorite and dilute alkali to achieve similar proportions of cell separation as of poplar. Chemical extraction and enzymatic digestion studies indicated that rhamnogalacturonan-I (RG-I), mannan and xylan contribute to cell-cell adhesion in pine wood. Mannan associated with lignin in an acidic chlorite fraction and with xylan in a dilute alkali fraction. RG-I and xylan were extracted in both chlorite and dilute alkali in poplar. Scanning electron microscopy and a probe diffusion study using Fluorescence Recovery After Photobleaching showed that lignin, RG-I and mannan initiated cell separation at cell corners and dilute alkali extraction of xylan was required for complete cell separation in pine. Cell-cell separation increased enzymatic saccharification within 24 h by 2-fold in poplar and 3.4-fold in pine. Finally, our results inform a strategy to reduce particle size in woody biomass and provide insights into different molecular bases of cell-cell adhesion.

59 BASIC BIOLOGICAL SCIENCES↗

Fractional condensation of pyrolysis vapors produced from Nordic feedstocks in cyclone pyrolysis

Pyrolysis oil is a complex mixture of different chemical compounds with a wide range of molecular weights and boiling points. Due to its complexity, an efficient fractionation of the oil may be a more promising approach of producing liquid fuels and chemicals than treating the whole oil. In this work a sampling system based on fractional condensation was attached to a cyclone pyrolysis pilot plant to enable separation of the produced pyrolysis vapors into five oil fractions. The sampling system was composed of cyclonic condensers and coalescing filters arranged in series. Our objective was to characterize the oil fractions produced from three different Nordic feedstocks and suggest possible applications. The oil fractions were thoroughly characterized using several analytical techniques including water content; elemental composition; heating value, and chemical compound group analysis using solvent fractionation, quantitative 13 C NMR and 1 H NMR and GC x GC - TOFMS. The results show that the oil fractions significantly differ from each other both in chemical and physical properties. The first fractions and the fraction composed of aerosols were highly viscous and contained larger energy-rich compounds of mainly lignin-derived material. The middle fraction contained medium-size compounds with relatively high concentration of water, sugars, alcohols, hydrocarbonyls and acids and finally the last fraction contained smaller molecules such as water, aldehydes, ketones and acids. But, the properties of the respective fractions seem independent on the studied feedstock types, i.e. the respective fractions produced from different feedstock are rather similar. Furthermore, this promotes the possibility to vary the feedstock depending on availability while retaining the oil properties. Possible applications of the five fractions vary from oil for combustion and extraction of the pyrolytic lignin in the early fractions to extraction of sugars from the early and middle fractions, and extraction of acids and aldehydes in the later fractions.

09 BIOMASS FUELS↗