Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,783 records · Page 99

Atypical Hydrogen Uptake on Chemically Activated, Ultramicroporous Carbon

Hydrogen adsorption at near-ambient temperatures on ultramicroporous carbon (UMC), derived through secondary chemical activation from a wood-based activated carbon was studied using volumetric and gravimetric methods. The results showed that physisorption is accompanied by a process of different nature that causes slow uptake at high pressures and hysteresis on desorption. In combination, this results in unusually high levels of hydrogen uptake at near-ambient temperatures and pressures (e.g. up to 0.8 wt % at 25 oC and 2 MPa). The heat of adsorption corresponding to the slow process leading to high uptake (17 20 kJ/mol) is higher than usually reported for carbon materials, but the adsorption kinetics is slow, and the isotherms exhibit pronounced hysteresis. These unusual properties were attributed to contributions from polarization-enhanced physisorption caused by traces of alkali metals residual from chemical activation. The results support the hypothesis that polarization-induced physisorption in high surface area carbons modified with traces of alkali metal ions is an alternate route for increasing the hydrogen storage capacity of carbon adsorbents.

08 HYDROGEN↗

Impact of the associated cation on chloride binding of Portland cement paste

Well hydrated cement paste was exposed to MgCl{sub 2}, CaCl{sub 2} and NaCl solutions at 20 °C. The chloride binding isotherms for free chloride concentrations ranging up to 1.5 mol/l were determined experimentally. More chlorides were found to be bound when the associated cation was Mg{sup 2} {sup +} or Ca{sup 2} {sup +} compared to Na{sup +}. The chloride binding capacity of the paste appeared to be related to the pH of the exposure solution. In order to explain the cation dependency of the chloride binding a selection of samples was investigated in detail using experimental techniques such as TG, XRD and SEM–EDS to identify the phases binding the chlorides. The experimentally obtained data were compared with the calculations of a thermodynamic model, GEMS. It was concluded that the measured change in chloride binding depending on the cation was mainly governed by the pH of the exposure solution and thereby the binding capacity of the C-S-H.

36 MATERIALS SCIENCE↗

The impact of sulphate and magnesium on chloride binding in Portland cement paste

The effect of magnesium and sulphate present in sea water on chloride binding in Portland cement paste was investigated. Ground well hydrated cement paste was exposed to MgCl{sub 2}, NaCl, NaCl + MgCl{sub 2}, MgSO{sub 4} + MgCl{sub 2} and artificial sea water solutions with a range of concentrations at 20 °C. Chloride binding isotherms are determined and pH of the solutions were measured. A selection of samples was examined by SEM-EDS to identify phase changes upon exposure. The experimental data were compared with calculations of a thermodynamic model. Chloride binding from sea water was similar to chloride binding for NaCl solutions. The magnesium content in the sea water lead to a slight decrease in pH, but this did not result in a notable increase in chloride binding. The sulphate present in sea water reduces both chloride binding in C–S–H and AFm phases, as the C–S–H incorporates more sulphates instead of chlorides, and part of the AFm phases converts to ettringite.

36 MATERIALS SCIENCE↗

Development of MgO concrete with enhanced hydration and carbonation mechanisms

This study proposed the use of hydration agent (HA) and seeds to improve the hydration and carbonation of reactive magnesium cement (RMC)-based concrete formulations. Hydration of RMC was evaluated by isothermal calorimetry. Water absorption and compressive strength results were used to assess the mechanical performance of RMC-based concrete samples. Quantification of hydrate and carbonate phases was performed via XRD and TGA. Formation and morphology of carbonates were observed via BSE and SEM. In addition to increasing the utilization of RMC in the carbonation reaction and facilitating early strength development, the use of HA formed large carbonate phases, while the addition of seeds improved sample microstructures via the development of dense carbonate networks. The improvements in morphology, microstructure and carbonate content in samples involving the simultaneous use of HA and seeds resulted in 56% lower water absorption values and 46% higher 28-day compressive strengths (70 MPa) in comparison to the control sample.

36 MATERIALS SCIENCE↗

Impact of gamma-ray irradiation on hardened white Portland cement pastes exposed to atmosphere

Samples of matured hardened cement paste were exposed to an environment with gamma-ray irradiation, which induces a natural carbonation process. After a dose of approximately 5 x 10{sup 4} kGy, the physical properties, microstructure, and phase composition of the irradiated hardened cement paste samples are compared with those of reference samples exposed to an identical environment without gamma-ray irradiation. Experiments confirm that aragonite and vaterite are preferentially formed under irradiation and that the bending strength is dramatically increased after gamma-ray irradiation. Based on field-emission scanning electron microscopy observations, X-ray scattering profiles, and water vapor sorption isotherm data, it is concluded that vaterite formed on C–S–H plays a role in strengthening the structure of C–S–H via pseudomorphs.

36 MATERIALS SCIENCE↗

Shape effect on drying behavior of cement-based materials: Mechanisms and numerical analysis

The shape of the specimen or structure has a direct impact on the behavior of drying concrete. This effect is not taken into account in most of shrinkage models and codes. Only the current B4 model and its previous version B3 model incorporate a shape factor. The determination of this coefficient is based on the nonlinear moisture diffusion analysis, which can explain the shape effect on the shrinkage rate. However, the model integrates this coefficient in the ultimate shrinkage values as well. An experimental study has been performed to confirm and understand this behavior. The mass loss and drying shrinkage of cylinders showed higher rate and ultimate values than the prisms, for the same effective cross section thickness. To explain this result, the drying, the differential shrinkage, the internal stress and the damaged depth were determined for both shapes through numerical modeling. The main input data of the model were the measured mass loss and shrinkage. The calculated desorption isotherm curve of the cylinder was below that of the prism, which is consistent with its higher ultimate mass-loss. The determination of stress profiles indicates slower stress mitigation for the cylinder. The cylinder develops a larger relative damaged area, defined as the part of the specimen where cracking is likely to occur due to tensile stresses. The results actually show that differential shrinkage between the edge and the core is more pronounced for the cylinder and decreases with time.

36 MATERIALS SCIENCE↗

Role of alcohol-ethylene oxide polymers on the reduction of shrinkage of cement paste

Concrete drying shrinkage is a major practical problem, but it can be ameliorated by means of ''shrinkage-reducing agents'' (SRAs). Water vapor sorption isotherms and low temperature DSC measurements suggest that alcohol-ethylene oxide polymers (AEOPs) with a better hydrophilic-lipophilic (HL-) balance are present in meso-pores in which water molecules evaporate from 75% RH to 40% RH. Short-term drying shrinkage measurements show that the better HL-balanced AEOPs reduce irreversible shrinkage, which occurs mainly from 75% RH to 40% RH during the first drying. Based on the similarity between corresponding RH regions, it is concluded that the better HL balanced AEOP in relevant meso-pores hinders agglomeration of C-S-H during the first desorption to mitigate the irreversible shrinkage and reduce the first drying shrinkage.

36 MATERIALS SCIENCE↗

A new hypothesis for air loss in cement systems containing fly ash

Although there are many benefits gained from incorporating fly ash into concrete, carbon contamination in the fly ash has been shown to interfere with the efficacy of organic additives in an unpredictable manner. This work uses surface tension measurements to quantify the adsorption of air-entraining agents (AEA) onto cement and fly ash. Both the adsorption capacity of the adsorbents and the adsorption isotherms indicate that the fly ash particles, rather than the carbon itself, dominate adsorption in a carbon-contaminated ash in cement pore solution. We propose that adsorption onto fly ash particles and cement actually improve air entrainment via Pickering stabilization. While the carbon is still expected to contribute to air loss via hydrophobic adsorption of the surfactants, we suggest that the primary way in which the carbon interferes is by shielding surfactant-coated fly ash particles from participating in air development and Pickering stabilization during mixing.

36 MATERIALS SCIENCE↗

Adsorption mechanism of acids and bases in reversed-phase liquid chromatography in weak buffered mobile phases designed for liquid chromatography/mass spectrometry

The overloaded band profiles of five acido-basic compounds were measured, using weakly buffered mobile phases. Low buffer concentrations were selected to provide a better understanding of the band profiles recorded in LC/MS analyses, which are often carried out at low buffer concentrations. In this work, 10 {micro}L samples of a 50 mM probe solution were injected into C{sub 18}-bonded columns using a series of five buffered mobile phases at {sub W}{sup S}pH between 2 and 12. The retention times and the shapes of the bands were analyzed based on thermodynamic arguments. A new adsorption model that takes into account the simultaneous adsorption of the acidic and the basic species onto the endcapped adsorbent, predicts accurately the complex experimental profiles recorded. The adsorption mechanism of acido-basic compounds onto RPLC phases seems to be consistent with the following microscopic model. No matter whether the acid or the base is the neutral or the basic species, the neutral species adsorbs onto a large number of weak adsorption sites (their saturation capacity is several tens g/L and their equilibrium constant of the order of 0.1 L/g). In contrast, the ionic species adsorbs strongly onto fewer active sites (their saturation capacity is about 1 g/L and their equilibrium constant of the order of a few L/g). From a microscopic point of view and in agreement with the adsorption isotherm of the compound measured by frontal analysis (FA) and with the results of Monte-Carlo calculations performed by Schure et al., the first type of adsorption sites are most likely located in between C{sub 18}-bonded chains and the second type of adsorption sites are located deeper in contact with the silica surface. The injected concentration (50 mM) was too low to probe the weakest adsorption sites (saturation capacity of a few hundreds g/L with an equilibrium constant of one hundredth of L/g) that are located at the very interface between the C{sub 18}-bonded layer and the bulk phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of thermal processes in high pressure liquid chromatography II. Thermal heterogeneity at very high pressures

Advanced instruments for liquid chromatography enables the operation of columns packed with sub-2 {micro}m particles at the very high inlet pressures, up to 1000 bar, that are necessary to achieve the high column efficiency and the short analysis times that can be provided by the use of these columns. However, operating rather short columns at high mobile phase velocities, under high pressure gradients causes the production of a large amount of heat due to the viscous friction of the eluent percolating through the column bed. The evacuation of this heat causes the formation of significant axial and radial temperature gradients. Due to these thermal gradients, the retention factors of analytes and the mobile phase velocity are no longer constant throughout the column. The consequence of this heat production is a loss of column efficiency. We previously developed a model combining the heat and mass balance of the column, the equations of flow through porous media, and a linear isotherm model of the analyte. This model was solved and validated for conventional columns operated under moderate pressures. We report here on the results obtained when this model is applied to columns packed with very fine particles, operated under very high pressures. These results prove that our model accounts well for all the experimental results. The same column that elutes symmetrical, nearly Gaussian peaks at low flow rates, under relatively low pressure drops, provides strongly deformed, unsymmetrical peaks when operated at high flow rates, under high pressures, and under different thermal environments. The loss in column efficiency is particularly important when the column wall is kept at constant temperature, by immersing the column in a water bath.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soot inception limits in laminar diffusion flames with application to oxy-fuel combustion

For diffusion flames, the combination of oxygen enrichment and fuel dilution results in an increase in the stoichiometric mixture fraction, Z{sub st}, and alters the flame structure, i.e., the relationship between the local temperature and the local gas composition. Increasing Z{sub st} has been shown to result in the reduction or even elimination of soot. In the present work, the effects of variable Z{sub st} on soot inception are investigated in normal and inverse coflow flames, using ethylene as the fuel. Use of the inverse coflow flame underscores the validity of these concepts, since the convective field in the inverse flame directs particles into the fuel-rich region. Sooting limits based on particle luminosity are measured as a function of Z{sub st}. The sooting limit is obtained by varying the amount of inert gas until soot appears above a predefined height. For each limit flame, the adiabatic flame temperature is calculated and the flame temperature at the half-height is measured. The flame temperature at the sooting limit is found to increase with Z{sub st} for both normal and inverse flames. The effects of residence time are also investigated, and the sooting limit inception temperature is found to be dependent on fuel stream velocity for both the normal and inverse configurations. A simple model applicable to oxy-fuel combustion is presented which describes how increasing Z{sub st} results in the reduction and ultimately elimination of soot. This model assumes that soot inception can only occur in a region where critical values for species, temperature, and residence time are met. The soot inception region is shown to be bounded by two isotherms: a low-temperature boundary that is a function of residence time, and a high-temperature boundary that corresponds to the location of a critical local carbon-to-oxygen ratio. The effect of increasing Z{sub st} is to move the boundaries of the soot inception zone towards each other, until the zone is infinitely thin and thus the sooting limit is reached. By comparing the model to experimental data, a critical local C/O ratio of 0.53 and a sooting limit inception temperature of 1640 K (for a characteristic residence time of 22 ms) were determined for ethylene. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic modeling of adsorption at the liquid-solid interface

Adsorptive separation techniques are significantly energy efficient in comparison to conventional thermal separation techniques such as distillation. Despite extensive research and development activities undertaken for mixed-gas adsorption, the use of adsorption techniques for the separation of multicomponent liquid mixtures is still limited. A major barrier is the lack of accurate adsorption thermodynamic models, which form the scientific foundation of process simulation of such systems, making the translation to industrial scale challenging. In this work, we have rigorously computed the surface excess of adsorption for six binary liquid mixtures on silica gel at 303 K using the frameworks of the generalized Langmuir isotherm (gL) and the adsorbed solution theory (AST). The six binary liquid mixtures were formed by the pair-wise combinations of four components: benzene, 1,2-dichloroethane, cyclohexane, and n-heptane. We have based our calculations by considering simultaneous equilibria of three phases: saturated vapor phase, bulk liquid phase, and adsorbed phase. Further, the composition of the corresponding saturated vapor phase was estimated by the Nonrandom Two-Liquid activity coefficient model and experimental vapor-liquid equilibria data. The activity coefficients of the adsorbed phase, the central issue of multicomponent adsorption thermodynamics, were calculated using the adsorption Nonrandom Two-Liquid activity coefficient model. Devoid of simplifying assumptions, gL and AST provide rigorous thermodynamic frameworks for adsorption equilibria of multicomponent liquid mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural basis of heme scavenging by the ChtA and HtaA hemophores in Corynebacterium diphtheriae

Corynebacterium diphtheriae causes diphtheria, a potentially fatal infectious disease that damages tissues in the upper respiratory tract. In order to proliferate, this pathogen acquires the essential nutrient iron from heme (iron-protoporphyrin IX) primarily found in human hemoglobin (Hb). C. diphtheriae secretes ChtA and HtaA hemophore proteins that bind ferric heme (hemin) via conserved region (CR) domains. Here, we demonstrate that their CR domains scavenge hemin after it is spontaneously released from Hb, and define the structural basis of hemin binding to ChtA and the N-terminal CR domain from HtaA by determining X-ray crystal structures of their protein-hemin complexes. Resonance Raman and electron paramagnetic resonance experiments demonstrate that the CR domains from ChtA and HtaA engage in pentacoordinate hemin binding through a conserved iron-tyrosyl linkage, though variations in their hemin pockets alter the way they stabilize the axial tyrosine and mask hemin’s metal. The importance of these interactions is probed using isothermal titration calorimetry experiments, which represent the first quantitative assessment of CR-hemin affinity and reveal that ChtA binds hemin via an enthalpically driven process. Hemin partitioning experiments using native mass spectrometry demonstrate that the cohort of CR domains within C. diphtheriae ’s hemin-uptake system have dissociation constants for hemin between 0.8 and 22 nM, raising the possibility that affinity differences contribute to the directional flow of hemin into the cell. Collectively, the results of this work provide insight into how C. diphtheriae and other pathogenic and commensal corynebacterium species utilize CR domains to scavenge iron rich hemin from their environment.

Corynebacterium diphtheriae↗

Equilibrium and heat of adsorption of diethyl phthalate on heterogeneous adsorbents

Removal of phthalate esters from water has been of considerable concern recently. In the present study, the adsorptive removal performance of diethyl phthalate (DEP) from water was investigated with the aminated polystyrene resin (NDA-101) and oxidized polystyrene resin (NDA-702). In addition, the commercial homogeneous polystyrene resin (XAD-4) and acrylic ester resin (Amberlite XAD-7) as well as coal-based granular activated carbon (AC-750) were chosen for comparison. The corresponding equilibrium isotherms are well described by the Freundlich equation and the adsorption capacities for DEP followed the order NDA-702 > NDA-101 > AC-750 > XAD-4 > XAD-7. Analysis of adsorption mechanisms suggested that these adsorbents spontaneously adsorb DEP molecules driven mainly by enthalpy change, and the adsorption process was derived by multiple adsorbent-adsorbate interactions such as hydrogen bonding, {pi}-{pi} stacking, and micropore filling. The information related to the adsorbent surface heterogeneity and the adsorbate-adsorbate interaction was obtained by Do's model. All the results indicate that heterogeneous resins NDA-702 and NDA-101 have excellent potential as an adsorption material for the removal of DEP from the contaminated water.

01 COAL, LIGNITE, AND PEAT↗

Neutron reflectivity study of substrate surface chemistry effects on supported phospholipid bilayer formation on (1120) sapphire.

Oxide-supported phospholipid bilayers (SPBs) used as biomimetric membranes are significant for a broad range of applications including improvement of biomedical devices and biosensors, and in understanding biomineralization processes and the possible role of mineral surfaces in the evolution of pre-biotic membranes. Continuous-coverage and/or stacjed SPBs retain properties (e.,g. fluidity) more similar to native biological membranes, which is desirable for most applications. Using neutron reflectivity, we examined face coverage and potential stacking of dipalmitoylphosphatidylcholine (DPPC) bilayers on the (1120) face of sapphire (a-Al2O3). Nearly full bilayers were formed at low to neutral pH, when the sapphire surface is positively charged, and at low ionic strength (l=15 mM NaCl). Coverage decreased at higher pH, close to the isoelectric point of sapphire, and also at high I>210mM, or with addition of 2mM Ca2+. The latter two effects are additive, suggesting that Ca2+ mitigates the effect of higher I. These trends agree with previous results for phospholipid adsorption on a-Al2O3 particles determined by adsorption isotherms and on single-crystal (1010) sapphire by atomic force microscopy, suggesting consistency of oxide surface chemistry-dependent effects across experimental techniques.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Complex coacervation of poly(ethylene-imine)/polypeptide aqueous solutions: Thermodynamic and rheological characterization

This study is aimed at understanding the complex coacervation of two systems: branched poly(ethyleneimine) with linear poly(D,L-glutamic acid) or poly(D,L-aspartic acid), and identify differences and similarities with previously reported systems. Three different techniques (turbidity, isothermal titration microcalorimetry-ITC and rheology) were used in a comprehensive study of coacervation. Sample turbidity was used to show how various parameters (salt, stoichiometry, pH, temperature) affect complex coacervation. Complex coacervation decreases with increase in salt and coacervate formation is maximum when a 31:69 mol% acid:base ratio is used. Rare in literature phase diagrams revealed that coacervates are formed over a wide range of acid:base ratios (15-88 mol% NH3+ groups), significantly broader compared to other systems. ITC was used for the thermodynamic characterization of the complexation between the polyelectrolytes, and showed that complex coacervation is entropy-driven (from the release of counter-ions) and enthalpically unfavored process. Composition and viscoelastic properties of the complex coacervates were examined gravimetrically and through rheology. Coacervate water content depends on the salt concentration and the stoichiometry. Coacervates exhibit a viscoelastic behavior that is dependent on the salt concentration. Master curves that can predict behavior at a wide range of time scales, not accessible by conventional rheological measurements, were created.

Complex coacervation↗

Selective Capture of Cesium and Thallium from Natural Waters and Simulated Wastes with Copper Ferrocyanide Functionalized Mesoporous Silica

Copper(II) ferrocyanide immobilized inside mesoporous silica MCM-41 supports (Cu-FC-EDA-SAMMSTM) has been evaluated against iron(III) hexacyanoferrate(II) (insoluble Prussian blue) for the sorption of cesium (Cs+) and thallium (Tl+) from natural waters and simulated wastes. The affinities (in term of distribution coefficients, Kd) of both sorbents for Cs and Tl were measured as a function of solution pH, competing cations, and matrices. For the entire pH studied (pH 0.1 to 7.3), Cu-FC-EDA-SAMMS had higher affinities for Cs and Tl (one to two orders of magnitude higher Kd) than Prussian blue and was less negatively impacted by the solution pH, competing cations, and matrices. The adsorption isotherms and kinetics of the two sorbents for Cs and/or Tl were also determined in seawater and simulated acid and alkaline wastes. SAMMS outperformed Prussian blue in terms of maximum adsorption capacity (e.g., 21.7 versus 2.6 mg Cs/g in acid waste stimulant, pH 1.1), and rate (e.g., over 95 wt% of Cs was removed after 2 minutes with SAMMS, while only 75 wt% was removed with Prussian blue). The lower affinity, capacity, and rate of Cs and Tl sorption on Prussian blue than those on Cu-FC-EDA-SAMMS were attributed to the molecular pore sizes, which restrict mass transport, and the insoluble Cs abducts of the Prussian blue, which restrict the ability of neighboring binding sites to further bind Cs ions. On the other hand, the large pores of SAMMS not only enable faster diffusion and faster binding chemistry, but they also allow isolation of binding sites so that one Cs binding event does not impact further Cs binding. In addition, iron (Fe) dissolved from insoluble Prussian blue over 10-fold of that from Cu-FC-EDA-SAMMS after 24 hours of contact time, indicating poorer material stability of Prussian blue.

54 ENVIRONMENTAL SCIENCES↗

Pro5 is not essential for the formation of ‘Ni-hook’ in nickel superoxide dismutase

The N-terminus of nickel-dependent superoxide dismutase (NiSOD) forms a structural motif known as the "Ni-hook," where the peptide wraps around the metal to bring cysteine-2 and cysteine-6 into spatial proximity, allowing these residues to coordinate in a cis-geometry. A highly conserved proline-5 residue in the Ni-hook adopts a cis-conformation that is widely considered important for its formation. Herein, we investigate this role by point mutation of Pro5 to alanine. The results obtained show that the variant exhibits wild-type-like redox catalysis and features a Ni(III) center very similar to that found in enzyme. Structural analysis using x-ray absorption spectroscopy of the nickel sites in as-isolated P5A-NiSOD reveals changes in the variant and are consistent with a six-coordinate Ni site with (N/O) 4 S 2 coordination. These changes are attributed to changes in the Ni(II) site structure. Nickel-binding studies using isothermal titration calorimetry reveal two binding events with K d = 25(20) nM, and 250(60) nM. These events are attributed to i) Ni(II) binding to a preformed Ni-hook containing cis-Pro5 and ii) the combination of trans- to cis- isomerization upon Ni(II) binding, respectively. Finally, the higher-affinity binding event is absent in P5A-NiSOD, an observation attributed to the low abundance of the cis-Ala5 isomer in the apo-protein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗